Asymptotic analysis in Linear Elasticity: From the pioneering studies by Wieghardt and Irwin until today

Engineering Fracture Mechanics

Volumn 76, Issue 12, 2009, Pages 1771-1784

  Carpinteri, Alberto ^a   Paggi, Marco ^a  

^a POLITECNICO DI TORINO   (Italy)

Author keywords

Fractal cracks; Multi material junctions and wedges; Nonhomogeneous materials; Power law hardening materials; Re entrant corners; Stress singularity

Indexed keywords

FRACTAL CRACKS; MULTI-MATERIAL JUNCTIONS AND WEDGES; NONHOMOGENEOUS MATERIALS; POWER-LAW HARDENING MATERIALS; RE-ENTRANT CORNERS;

CRACKS; ELASTICITY; FRACTALS; HARDENING; LAWS AND LEGISLATION; MATERIALS; PLATES (STRUCTURAL COMPONENTS); STRESS ANALYSIS; STRESS CONCENTRATION; STRUCTURAL DESIGN;

ASYMPTOTIC ANALYSIS;

EID: 67649229688     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2009.03.012     Document Type: Article

References (86)

1. England A.H. On stress singularities in Linear Elasticity. Int J Engng Sci 9 (1971) 571-585
2. Sinclair G.B. Stress singularities in classical elasticity-I: removal, interpretation, and analysis. Applied Mechanics Reviews 57 (2004) 251-297
3. Sinclair G.B. Stress singularities in classical elasticity-II: asymptotic identification. Appl Mech Rev 57 (2004) 385-439
4. Paggi M., and Carpinteri A. On the stress-singularities at multi-material interfaces and related analogies with fluid dynamics and diffusion. Appl Mech Rev 61 (2008) 1-22
5. Flamant M. Comptes Rendus 114 (1892) 1465-1468
6. Boussinesq J. Applications des Potentials à l'etude de l'équilibre et du mouvement des solides élastiques (1885), Gauthier-Villars, Paris
7. Michell J.H. Elementary distributions of plane stress. Proc Lond Math Soc 32 (1900) 35-61
8. Wieghardt K. Über das spalten und zerreissen elastischer kÖrper. Z Math Phys 55 (1907) 60-103
9. Rossmanith H.P. An introduction to K. Wieghardt's historical paper on splitting and cracking of elastic bodies. Fatigue Fract Engng Mater Struct 12 (1995) 1367-1369
10. Brahtz J.H.A. Stress distribution in a reentrant corner. Trans Amer Soc Mech Eng 55 (1933) 31-37
11. von Kármán T. Uber die grundlagen der balkentheorie. Abh Aerodyn Inst Techn Hochschule Aachen 7 (1927)
12. Westergaard H.M. Stresses at a crack, size of the crack, and the bending of reinforced concrete. J Amer Concrete Inst (1933) 93-120
13. Hertz H. über die berührung fester elastischer kÖrper. J Reine Angew Math 92 (1881) 156-171
14. Kolosoff GV. On the application of the complex function theory to a plane problem of the mathematical theory of elasticity. Dorpat University; 1909 [in Russian].
15. Muskhelishvili NI. Some basic problems of the mathematical theory of elasticity. Acad. Sci. USSR, Leningrad, 1933. 2nd English ed. Groningen, Holland: Nordhoof Ltd.; 1953.
16. Westergaard H.M. Bearing pressures and cracks. ASME J Appl Mech (1939) A49-A53
17. Muskhelishvili N.I. The fundamental boundary problems of the theory of elasticity for the plane with straight cuts (in russian). Soobshcheniya AN Gruz SSR III (1942) 103-110
18. Sih G.C. On the Westergaard method of crack analysis. Int J Fract Mech 2 (1966) 628-630
19. Williams M.L. Stress singularities resulting from various boundary conditions in angular corners of plates in extension. ASME J Appl Mech 74 (1952) 526-528
20. Williams M.L. On the stress distribution at the base of a stationary crack. ASME J Appl Mech 24 (1957) 109-114
21. Lord Rayleigh. Scientific papers. 1920;6:18-21.
22. Dean W.R., and Montagnon P.E. On the steady motion of viscous liquid in a corner. Proc Cambridge Philos Soc 45 (1948) 389-395
23. Neuber H. Theory of notch stresses (1958), Springer-Verlag, Berlin
24. Hobbacher A, et al. Recommendations for fatigue design of welded joints and components. IIW doc. XIII-1965-03/XV-1127-03; 2006.
25. Sih G.C. Strain-energy-density factor applied to mixed mode crack problems. Int J Fract 10 (1974) 305-321
26. Lazzarin P., and Berto F. From Neuber's elementary volume to Kitagawa and Atzori's diagrams: an interpretation based on local energy. Int J Fract 135 (2005) L33-L38
27. Sih G.C., and Tang X.S. Scaling of volume energy density function reflecting damage by singularities at macro,- meso- and microscopic level. Theor Appl Fract Mech 43 (2005) 211-231
28. Tang X.S., and Sih G.C. Weak and strong singularities reflecting multiscale damage: micro-boundary conditions for free-free, fized-fized and free-fized constraints. Theor Appl Fract Mech 43 (2005) 5-62
29. Griffith A.A. The phenomena of rupture and flow in solids. Phil Trans R Soc Lond Ser A 221 (1921) 163-198
30. Irwin G.R. Analysis of stresses and strains near the end of a crack traversing a plate. J Appl Mech 24 (1957) 361-364
31. Irwin GR. Plastic zone near a crack and fracture toughness. In: Proceedings of the seventh Sagamore conference, vol. IV. New York: Syracuse University; 1960. p. 63-78.
32. Carpinteri A. Size effect in fracture toughness testing: a dimensional analysis approach. In: Sih GC, Mirabile M, editors. Analytical and experimental fracture mechanics (Proceedings of an international conference). Roma, Italy; 1980. p. 785-97. Alphen an den Rijn; 1981. Sijthoff & Noordhoff.
33. IC for aggregative materials. In: François D. (Ed). Advances in fracture research (Proceedins of ICF5, Cannes, France) (1981), Pergamon Press, Oxford 1491-1498
34. Carpinteri A. Notch sensitivity in fracture testing of aggregative materials. Engng Fract Mech 16 (1982) 467-481
35. El Haddad M.H., Topper T.H., and Smith K.N. Prediction of non-propagating cracks. Engng Fract Mech 11 (1979) 573-584
36. Ciavarella M., Paggi M., and Carpinteri A. One no one and one hundred thousand crack propagation laws: a generalized Barenblatt and Botvina dimensional analysis approach to fatigue crack growth. J Mech Phys Solids 56 (2008) 3416-3432
37. Barber J.R. Elasticity (1992), Kluwer Academic Publishers, Dordrecht
38. Giannakopoulos A.E., Lindley T.C., and Suresh S. Aspects of equivalence between contact mechanics and fracture mechanics: theoretical connections and a life-prediction methodology for fretting fatigue. Acta Mater 46 (1998) 2955-2968
39. Giannakopoulos A.E., and Suresh S. A three-dimensional analysis of fretting fatigue. Acta Mater 46 (1998) 177-192
40. Hein V.L., and Erdogan F. Stress singularities in a two-material wedge. Int J Fract Mech 7 (1971) 317-330
41. Dundurs J., and Lee M.-S. Stress concentration at a sharp edge in contact problems. J Elasticity 2 (1972) 109-112
42. Gdoutos E.E., and Theocaris P.S. Stress concentrations at the apex of a plane indenter acting on an elastic half plane. ASME J Appl Mech 8 (1975) 688-692
43. Comninou M. Stress singularity at a sharp edge in contact problems with friction. J Appl Math Phys (ZAMP) 27 (1976) 493-499
44. Hills D.A., and Dini D. A new method for the quantification of nucleation of fretting fatigue cracks using asymptotic contact solutions. Tribol Int 39 (2006) 1114-1122
45. Mugadu A., Hills D.A., and Limmer L. An asymptotic approach to crack initiation in fretting fatigue of complete contacts. J Mech Phys Solids 50 (2002) 531-547
46. Churchman C., Mugadu A., and Hills D.A. Asymptotic results for slipping complete frictional contacts. Eur J Mech A/Solids 22 (2003) 793-800
47. Mugadu A., and Hills D.A. A generalised stress intensity approach to characterising the process zone in complete fretting contacts. Int J Solids Struct 39 (2002) 1327-1335
48. Mugadu A., Hills D.A., Barber J.R., and Sackfield A. The application of asymptotic solutions to characterising the process zone in almost complete frictional contact. Int J Solids Struct 41 (2004) 385-397
49. Argatov I.I. The asymptotic solution of the contact problem for a three-dimensional elastic body of finite dimensions. J Appl Math Mech 63 (1999) 937-942
50. Argatov I.I. The asymptotic solution of a contact problem with a half-unknown boundary of the contact region. J Appl Math Mech 64 (2000) 443-447
51. Willis J.R., and Movchan A.B. Dynamic weight functions for a moving crack. I. Mode I loading. J Mech Phys Solids 43 (1995) 319-341
52. Willis J.R. Fracture mechanics of interfacial cracks. J Mech Phys Solids 19 (1971) 353-368
53. Willis J.R. Interfacial stresses induced by arbitrary loading of dissimilar elastic half-spaces joined over a circular region. J. Inst. Math. Appl. 7 (1971) 179-197
54. Bercial-Velez J.P., Antipov Y.A., and Movchan A.B. High-order asymptotics and perturbation problems for 3D interfacial cracks. J Mech Phys Solids 53 (2005) 1128-1162
55. Piccolroaz A., Mishuris G., and Movchan A.B. Evaluation of the Lazarus-Leblond constants in the asymptotic model of the interfacial wavy crack. J Mech Phys Solids 55 (2007) 1575-1600
56. Gross R., and Mendelson A. Plane elastostatic analysis of V-notched plates. Int J Fract Mech 8 (1972) 267-276
57. Carpinteri A. Stress-singularity and generalized fracture toughness at the vertex of re-entrant corners. Engng Fract Mech 26 (1987) 143-155
58. Atzori B. Notch effect or Linear Elastic Fracture Mechanics in fatigue design. In: Proceedings of the XIII congress of the Italian Society for Strain Analysis (AIAS); 1985.
59. Gómez F.J., and Elices M. Fracture of components with V-shaped notches. Engng Fract Mech 70 (2003) 1913-1927
60. Gómez F.J., and Elices M. Fracture loads for ceramic samples with rounded notches. Engng Fract Mech 73 (2006) 880-894
61. Bažant Z.P., and Yu Q. Size effect on strength of qausibrittle structures with reentrant corners symmetrically loaded in tension. ASCE J Engng Mech 132 (2006) 1168-1176
62. Rice J.R., and Rosengren G.F. Plain strain deformation near a crack tip in a power-law hardening material. J Mech Phys Solids 16 (1968) 1-12
63. Hutchinson J.W. Singular behaviour at the end of a tensile crack in a hardening material. J Mech Phys Solids 16 (1968) 13-31
64. Carpinteri A. Plastic flow collapse vs. separation collapse in elastic-plastic strain-hardening structures. Mater Struct 16 (1983) 85-96
65. Carpinteri A. Fractal nature of material microstructure and size effects on apparent mechanical properties. Mech Mater 1994;18:89-101. Internal Report, Laboratory of Fracture Mechanics, Politecnico di Torino, N. 1/92; 1992.
66. Carpinteri A. Scaling laws and renormalization groups for strength and toughness of disordered materials. Int J Solids Struct 31 (1994) 291-302
67. Goldstein R.V., and Mosolov A.B. Fractal cracks. J Appl Math Mech 56 (1992) 563-571
68. Bogy D.B., and Wang K.C. Stress singularities at interface corners in bonded dissimilar isotropic elastic materials. Int J Solids Struct 7 (1971) 993-1005
69. Theocaris P.S. The order of singularity at a multi-wedge corner of a composite plate. Int J Engng Sci 12 (1974) 107-120
70. Pageau S.S., Joseph P.F., and Biggers Jr. S.B. The order of stress singularities for bonded and disbonded three-material junctions. ASME J Appl Mech 31 (1994) 2979-2997
71. Carpinteri A., and Paggi M. Influence of the intermediate material on the singular stress field in tri-material junctions. Mater Sci 42 (2006) 95-101
72. Carpinteri A., and Paggi M. Analytical study of the singularities arising at multi-material interfaces in 2D linear elastic problems. Engng Fract Mech 74 (2007) 1041-1053
73. Pageau S.S., Gadi K.S., Biggers Jr. S.B., and Joseph P.F. Standardized complex and logarithmic eigensolutions for n-material wedges and junctions. Int J Fract 77 (1996) 51-76
74. Gradin P.A. A fracture criterion for edge-bonded bimaterial bodies. J Compos Mater 16 (1982) 448-456
75. Hattori T., Sakata S., and Murakami G. A stress singularity parameter approach for evaluating the interfacial reliability of plastic incapsulated LSI devices. ASME J Electron Packaging 111 (1989) 243-248
76. Reedy Jr. J.E. Asymptotic interface solutions for butt tensile joints. Int J Solids Struct 30 (1993) 767-777
77. Reedy Jr. J.E., and Guess T.R. Comparison of butt tensile strength data with interface corner stress intensity factor prediction. Int J Solids Struct 30 (1993) 2929-2936
78. Delale F., and Erdogan F. The crack problem for a nonhomogeneous plane. ASME J Appl Mech 50 (1983) 609-614
79. Jin Z.-H., and Batra R.C. Some basic fracture mechanics concepts in functionally graded materials. J Mech Phys Solids 44 (1996) 1221-1235
80. Paulino GH, editor. Special issue on fracture of functionally graded materials. Engng Fract Mech 2002;69.
81. Carpinteri A., Paggi M., and Pugno N. An analytical approach for fracture and fatigue in functionally graded materials. Int J Fract 141 (2006) 535-547
82. Carpinteri A, Paggi M. Thermo-elastic mismatch in nonhomogeneous beams. J Engng Math [in press]. doi: 10.1007/s10665-008-9212-8.
83. Erdogan F. Stress intensity factors. ASME J Appl Mech 50 (1983) 992-1002
84. Eischen J.W. Fracture of nonhomogeneous materials. Int J Fract 34 (1987) 3-22
85. Carpinteri A., and Paggi M. On the asymptotic stress field in angularly nonhomogeneous materials. Int J Fract 135 (2005) 267-283
86. Theotokoglou E.E., and Stampouloglou I.H. The plane wedge problem loaded at its apex - the self-similarity property and the characteristic vector. J Elasticity 76 (2004) 21-43