Stress singularities in classical elasticity - II: Asymptotic identification

Applied Mechanics Reviews

Volumn 57, Issue 1-6, 2004, Pages 385-439

  Sinclair, Glenn B ^a  

^a LOUISIANA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTIC WEDGES; POLAR COORDINATES; POWER SINGULARITY; STRESS SINGULARITIES;

BOUNDARY CONDITIONS; ELASTIC MODULI; ELASTICITY; NUMERICAL ANALYSIS; PARAMETER ESTIMATION; STRAIN; STRUCTURAL ANALYSIS;

STRESS ANALYSIS;

EID: 19944417291     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1767846     Document Type: Article

References (229)

1. Sinclair GB (2004), Stress singularities in classical elasticity - I: Removal, interpretation, and analysis, Appl. Mech. Rev. 57, 251-298.
2. Williams ML (1952), Stress singularities resulting from various boundary conditions in angular corners of plates in extension, ASME J. Appl. Mech. 19, 526-528.
3. Dempsey JP, and Sinclair GB (1979), On the stress singularities in the plane elasticity of the composite wedge, J. Elast. 9, 373-391.
4. Rao AK (1958), A study into the problem of diffusion of loads, Doctoral Dissertation, Univ of London, London, UK.
5. Johnson KL (1985), Contact Mechanics, Cambridge Univ Press, Cambridge, UK.
6. Winkler E (1867), Theory of Elasticity and Strength, (German), H Dominicus Press, Prague, Austria.
7. Gravas GA (1964), Review Number 4988, Appl. Mech. Rev. 17, 684.
8. Euler L (1774), The pressure in planes from weights that settle (Latin), Novi Commun Acad Petropolit 18, 283-329.
9. Nuller BM (1974), Deformation of an elastic wedge reinforced by a beam, J. Appl. Math. Mech. 38, 823-829.
10. Ting TCT (1985), Asymptotic solution near the apex of an elastic wedge with curved boundaries, Q. Appl. Math. 42, 467-476.
11. Gregory RD (1979), Green's functions, bi-linear forms, and completeness of the eigenfunctions for the elastostatic strip and wedge, J. Elast. 9, 283-309.
12. Knowles JK, and Pucik TA (1973), Uniqueness for plane crack problems in linear elastostatics, J. Elast. 3, 155-160.
13. Lighthill MJ (1975), Introduction to Fourier Analysis and Generalized Functions, Cambridge Univ Press, Cambridge, UK.
14. Kolossoff G (1910), On an application of the theory of complex variables to the two-dimensional problem of elasticity theory, Doctoral Dissertation, St Petersburg, Russia.
15. Kolossoff G (1914), On some properties of the plane problem of elasticity theory (German), Z. Math. Phys. 62, 384-409.
16. Inglis CE (1913), Stresses in a plate due to the presence of cracks and sharp corners, Soc. Nav. Archil. Mar. Eng., Trans. 55, 219-241.
17. Neuber H 1946, Theory of Notch Stresses, JW Edwards Co, Ann Arbor MI.
18. Kitover KA (1952), On the use of special systems of biharmonic functions for the solution of some problems in the theory of elasticity (Russian), Prikl. Mat. Mekh. 16, 739-748.
19. Kalandiia AI (1969), Remarks on the singularity of elastic solutions near corners, J. Appl. Math. Mech. 33, 127-131.
20. Seweryn A, and Molski K (1996), Elastic stress singularities and corresponding generalized stress intensity factors for angular corners under various boundary conditions, Eng. Fract. Mech. 55, 529-556.
21. Dempsey JP (1978), On the stress singularities in the plane elasticity of the composite wedge, Doctoral Dissertation, Univ of Auckland, Auckland, New Zealand.
22. Gdoutos EE, and Theocaris PS (1975), Stress concentrations at the apex of a plane indentor acting on an elastic half plane, ASME J. Appl. Mech. 42, 688-692.
23. Sinclair GB (1996), On the influence of cohesive stress-separation laws on elastic stress singularities, J. Elast. 44, 203-221.
24. Rössle A (2000), Corner singularities and regularity of weak solutions for the two-dimensional Lamé equations on domains with angular corners, J. Elast. 60, 57-75.
25. Rösel R (1987), On the wedge/notch eigenvalues. Int. J. Fract. 33, 61-71.
26. Karp SN, and Karal FC (1962), The elastic-field behavior in the neighborhood of a crack of arbitrary angle, Commun. Pure Appl. Math. 15, 413-421.
27. Sinclair GB, Khatod HN, and Rummel CW (2003), On the removal of stress singularities from sharp corners, Proc of the 19 Canadian Congress of Applied Mechanics, Vol. 1, Calgary, Alberta, 1, 94-95.
28. Williams ML (1953), Discussion of 'Stress singularities resulting from various boundary conditions in angular corners of plates in extension,' ASME J. Appl. Mech. 20, 590.
29. Ricci L (1951), Table of Minimum Roots of an Equation of Interest in Solid Mechanics (Italian), Pubblicazioni No 296, Istituto per le Applicazioni del Calcolo, Rome, Italy.
30. Klingbeil NW (1996), private communication.
31. England AH (1971), On stress singularities in linear elasticity, Int. J. Eng. Sci. 9, 571-585.
32. Smallwood BS (1996), private communication.
33. Dempsey JP (1995), Power-logarithmic stress singularities at bimaterial corners and interface cracks, J. Adhes. Sci. Technol. 9, 253-265.
34. Sinclair GB (1999), Logarithmic stress singularities resulting from various boundary conditions in angular corners of plates in extension, ASME J. Appl. Mech. 66, 556-560.
35. Browning RV, and Ju FD (1977), Stress singularities at an elastic crack with arbitrary surface loads, including possible fracture mechanics applications, J. Math. Anal. Appl. 58, 482-496.
36. ANSYS personnel (1995), ANSYS User's Manual, Revision 5.2, Vol I, ANSYS Ine, Canonsburg, PA.
37. ABAQUS personnel (1997), ABAQUS Standard User's Manual, Revision 5.7, Vol I, Hibbitt, Karlsson and Sorensen, Inc, Pawtucket, RI.
38. Sinclair GB, and Epps BE (2002), On the logarithmic stress singularities induced by the use of displacement shape functions in bound ary conditions in submodelling, Commun. Numer. Methods Eng. 18, 121-130.
39. Dempsey JP (1981), The wedge subjected to tractions: A paradox resolved, J. Elast. 11, 1-10.
40. Sinclair GB (1998), Further paradoxes in generalized Levy problems, J. Elast. 50, 253-259.
41. Levy M (1898), On the elastic equilibrium of a masonry dam of triangular cross section (French), Acad. Sci., Paris, C. R. 127, 10-15.
42. Timoshenko SP, and Goodier JN (1970), Theory of Elasticity, 3rd Edition, McGraw-Hill, New York, NY.
43. Fillunger P (1912), Three important plane states of stress for wedge-shaped bodies (German), Z. Angew. Math. Mech. 60, 275-285.
44. Ting TCT (1984), The wedge subjected to tractions: A paradox reexamined, J. Elast. 14, 235-247.
45. Sternberg E, and Koiter WT (1959), Discussion of "The wedge under a concentrated couple: A paradox in the two-dimensional theory of elasticity," ASME J. Appl. Mech. 26, 472-474.
46. Sneddon IN (1951), Fourier Transforms, McGraw-Hill, New York, NY.
47. Brock LM (1979), Frictionless indentation by a rigid wedge: The effect of tangential displacements in the contact zone, Int. J. Eng. Sci. 17, 365-372.
48. Rao AK (1971), Stress concentrations and singularities at interface corners, Z. Angew. Math. Mech. 51, 395-406.
49. Erdogan F, and Gupta GD (1972), Stresses near a flat inclusion in bonded dissimilar materials, Int. J. Solids Struct. 8, 533-547.
50. Jones JP, and Whittier JS (1967), Waves at a flexibly bonded interface, ASME J. Appl. Mech. 34, 905-909.
51. Lene F, and Leguillon D (1982), Homogenized constitutive law for a partially cohesive composite material, Int. J. Solids Struct. 18, 443-458.
52. Ying X, and Katz IN (1987), A uniform formulation for the calculation of stress singularities in the plane elasticity of a wedge composed of multiple Isotropic materials, Comput. Math. Appl. 14, 437-458.
53. Dundurs J (1969), Discussion of "Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading," ASME J. Appl. Mech. 36, 650-652.
54. Bogy DB (1968), Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading, ASME J. Appl. Mech. 35, 460-466.
55. Zak AR, and Williams ML (1963), Crack point stress singularities at a bi-material interface, ASME J. Appl. Mech. 30, 142-143.
56. Dundurs J (1967), Effect of elastic constants on stress in a composite under plane deformation, J. Compos. Mater. 1, 310-322.
57. Koguchi H, Inoue T, and Yada T (1996), Stress singularity in three-phase bonded structure, ASME J. Appl. Mech. 63, 252-258.
58. Williams MI (1959), The stresses around a fault or crack in dissimilar media, Bull. Seismol. Soc. Am. 49, 199-204.
59. Bogy DB (1971), Two edge-bonded elastic wedges of different materials and wedge angles under surface tractions, ASME J. Appl. Mech. 38, 377-386.
60. Theocaris PS, and Gdoutos EE (1977), Stress singularities in cracked composite full-planes, Int. J. Fract. 13, 763-773.
61. Ting TCT (1986), Explicit solution and invariance of the singularities at an interface crack in anisotropic composites, Int. J. Solids Struct. 22, 965-983.
62. Ballarini R (1990), A rigid line inclusion at a bimaterial interface, Eng. Fract. Mech. 37, 1-5.
63. Comninou M (1977), Interface crack with friction in the contact zone, ASME J . Appl. Mech. 44, 780-781.
64. Dempsey JP, and Sinclair GB (1981), On the singular behavior at the vertex of a bi-material wedge, J. Elast. 11, 317-327.
65. Comninou M (1977), The interface crack, ASME J. Appl. Mech. 44, 631-636.
66. Comninou M (1976), Stress singularity at a sharp edge in contact problems with friction, Z. Angew. Math. Phys. 27, 493-499.
67. Dundurs J, and Lee M-S (1972), Stress concentration at a sharp edge in contact problems, J. Elast. 2, 109-112.
68. Wu K-C (1990), Line inclusions at anisotropic bimaterial interface, Mech. Mater. 10, 173-182.
69. Chen YZ, and Hasebe N (1993), Singularity eigenvalue analysis of a crack along a wedge-shaped interface, ASME J. Appl. Mech. 60, 781-783.
70. Van Vroonhoven JCW (1992), Stress singularities in bi-material wedges with adhesion and delamination, Fatigue Fract. Eng. Mater. Struct. 15, 159-171.
71. Bogy DB, and Wang KC (1971), Stress singularities at interface corners in bonded dissimilar Isotropic elastic materials, Int. J. Solids Struct. 7, 993-1005.
72. Chen D-H, and Nisitani H (1993), Singular stress field near the corner of jointed dissimilar materials, ASME J. Appl. Mech. 60, 607-613.
73. Pageau SS, Joseph PF, and Biggers Jr SB (1994), The order of stress singularities for bonded and disbonded three-material junctions, Int. J. Solids Struct. 31, 2979-2997.
74. Chaudhuri RA, Xie M, and Garala HJ (1996), Stress singularity due to kink band weakening a unidirectional composite under compression, J. Compos. Mater. 30, 672-691.
75. Khrapkov AA (1968), First fundamental problem for a piecewise-homogeneous plane with a slit perpendicular to the line of separation, J. Appl. Math. Mech. 32, 666-678.
76. Bogy DB (1971), On the plane elastostatic problem of a loaded crack terminating at a material interface, ASME J. Appl. Mech. 38, 911-918.
77. Comninou M, and Dundurs J (1979), A closed crack tip terminating at an interface, ASME J. Appl. Mech. 46, 97-100.
78. Wijeyewickrema AC, Dundurs J, and Keer LM (1995), The singular stress field of a crack terminating at a frictional interface between two materials, ASME J. Appl. Mech. 62, 289-293.
79. Gharpuray VM, Dundurs J, and Keer LM (1991), A crack terminating at a slipping interface between two materials, ASME J. Appl. Mech. 58, 960-963.
80. Fenner DN (1976), Stress singularities in composite materials with an arbitrarily oriented crack meeting an interface, Int. J. Fract. 12, 705-721.
81. Yong-Li W (1992), Crack tip stress singularities in a bimaterial with an inclined interface, Int. J. Fract. 54, R65-R72.
82. Wang W-C, and Chen J-T (1994), Singularities of an arbitrarily inclined semi-infinite crack meeting a bimaterial interface, Eng. Fract. Mech. 49, 671-680.
83. Tan MA, and Meguid SA (1997), Stress singularities of a sharp notch terminating at a bimaterial interface, Proc of 16th Canadian Congress of Applied Mechanics Vol 1, Laval Univ, Quebec, Canada, 17-18.
84. Pinsan C, and Zhuping D (1991), Singular behavior and asymptotic stress field of a crack terminating at a bimaterial interface, Acta Mech. Sin. 7, 344-350.
85. Bogy DB (1970), On the problem of edge-bonded quarter-planes loaded at the boundary, Int. J. Solids Struct. 6, 1287-1313.
86. Hein VL, and Erdogan F (1971), Stress singularities in a two-material wedge, Int. J. Fract. Mech. 7, 317-330.
87. Kubo S, Ohji K, and Nakai Y (1991), Free-edge singularities in edge-bonded elastic dissimilar wedges-geometrical conditions for appearance and disappearance of stress singularities, Report of the 61st Meeting of the Committee on Fracture Mechanics, Vol 39, Soc of Materials Science, Japan, 13-17 (this work is summarized in Murakami [95]).
88. Theocaris PS, and Gdoutos EE (1976), Stress singularities at equal angle biwedges and two-material composite half planes with rough interfaces, ASME J. Appl. Mech. 43, 64-68.
89. Theocaris PS, and Gdoutos EE (1976), Stress singularities at vertices of composite plates with smooth or rough interfaces, Arch. Mech. Stosow. 28, 693-704.
90. Aksentian OK (1967), Singularities of the stress-strain state of a plate in the neighborhood of an edge, J. Appl. Math. Mech. 31, 193-202.
91. Avetisian AG, and Chobanian KS (1972), On the nature of stresses in the fixed vicinity of the junction surface brink of a composite elastic body loaded in conditions of a plane problem of the elasticity theory (Russian), Dokl. Akad. Nauk Arm. SSR 25, 13-25.
92. Picu CR, and Gupta V (1996), Stress singularities at triple junctions with freely sliding grains, Int. J. Solids Struct. 33, 1535-1541.
93. Inoue T, and Koguchi H (1996), Influence of the intermediate material on the order of stress singularity in three-phase bonded structure, Int. J. Solids Struct. 33, 399-417.
94. Pageau SS, Gadi KS, Biggers Jr SB, and Joseph PF (1996), Standardized complex and logarithmic eigensolutions for n-material wedges and junctions, Int. J. Fract. 77, 51-76
95. Pageau SS, Gadi KS, Biggers Jr SB, and Joseph PF (1996), Standardized complex and logarithmic eigensolutions for n-material wedges and junctions, Int. J. Fract. ibid., 80, 97.
96. Murakami Y (1992), Stress singularity for notch at bimaterial interface, Stress Intensity Factors Handbook Vol 3, Y Murakami et al (eds), Pergamon Press, Oxford, UK, 963-1062.
97. Chen D-H (1996), Logarithmic singular stress field in a semi-infinite plate consisting of two edge-bonded wedges subjected to surface tractions, Int. J. Fract. 75, 352-378.
98. Courant R and Hilbert D (1953), Methods of Mathematical Physics, 1st English Edition, Vol I, Interscience Publ, New York, NY.
99. de Saint-Venant B (1878), On the torsion of prisms with bases made of circular arcs and radial lines, and on a singularity which can be found in certain uses of the logarithmic cylindrical coordinate system of Lamé (French), Acad. Sci., Paris, C. R. 87, 849-854.
100. Sinclair GB (1980), On the singular eigenfunctions for plane harmonic problems in composite regions, ASME J. Appl. Mech. 47, 87-92.
101. Thomson W, and Tait PG (1867), A Treatise on Natural Philosophy, Cambridge Univ Press, Cambridge, UK (This book is also available in two parts as Principles of Mechanics and Dynamics, Dover Publ, New York, NY).
102. de Saint-Venant B (1878), Sample calculations for the torsion of prisms with bases made of circular arcs and radial lines (French), Acad. Sci., Paris, C. R. 87, 893-899.
103. Irwin GR, and Kies JA (1957), Fracture, Proc of ONR Symp, Washington DC, 563-571.
104. Wasow W (1957), Asymptotic development of the solution of Dirichlet's Problem at analytic corners, Duke Math. J. 24, 47-56.
105. Ting TCT (1985), Elastic wedge subjected to antiplane shear tractions - A paradox explained, Q. J. Mech. Appl. Math. 38, 245-255.
106. Sinclair GB (1999), A note on the removal of further breakdowns in classical solutions of Laplace's equation on sectorial regions, J. Elast. 56, 247-252.
107. Ma C-C, and Hour B-L (1989), Analysis of dissimilar anisotropic wedges subjected to antiplane shear deformation, Int. J. Solids Struct. 25, 1295-1309.
108. Sinclair GB (2000), Logarithmic stress singularities in two-dimensional and three-dimensional elasticity, Proc of 20th Southeastern Conf of Theoretical and Applied Mechanics, Callaway Gardens, GA, SM94.1-8.
109. Barnett DM (1967), The effect of shear modulus on the stress distribution produced by a planar array of screw dislocations near a bimetallic interface, Acta Metall. 15, 589-594.
110. Sendeckyj GP (1973), Analysis of cracks in heterogeneous solids, Fracture Mechanics of Ceramics, Vol 1, RC Bradt, DPH Hasselman, and FF Lang (eds), Plenum Press, New York, NY, 269-282.
111. Pageau SS, Joseph PF, and Biggers Jr SB (1995), Singular antiplane stress fields for bonded and disbonded three-material junctions, Eng. Fract. Mech. 52, 821-832.
112. Keer LM, and Freeman NJ (1970), Load transfer problem for an embedded shaft in torsion, ASME J. Appl. Mech. 37, 959-964.
113. Love AEH (1944), A Treatise on the Mathematical Theory of Elasticity, 4th Edition, Dover Publ, New York, NY.
114. Kirchhoff G (1850), On the equilibrium and deflection of an elastic plate (German), J. Reine Angew. Math. 40, 51-88.
115. Timoshenko SP, and Woinowsky-Krieger S (1959), Theory of Plates and Shells, 2nd Edition, McGraw-Hill, New York, NY.
116. Williams ML (1951), Surface stress singularities resulting from various boundary conditions in angular corners of plates under bending, Proc of 1st US Nat Congress of Applied Mechanics, Illinois Inst of Tech, Chicago, IL, 325-329.
117. Southwell RV (1950), On the analogues relating flexure and extension of flat plates, Q. J. Mech. Appl. Math. 3, 257-271.
118. Dixon AC (1934), The problem of the rectangular plate, J. Lond. Math. Soc. 9, 61-74.
119. Carrier GF and Shaw FS (1949), Some problems in the bending of thin plates, Proc of 3rd Symp in Applied Mathematics of the Am Mathematical Soc, Vol 3, Univ of Michigan, Ann Arbor, MI, 125-128.
120. Morley LSD (1964), Bending of clamped rectilinear plates, Q. J. Mech. Appl. Math. 17, 293-317.
121. Hrudey TM, and Hrabok MM (1986), Singularity finite elements for plate bending, J. Eng. Mech. 112, 666-681.
122. Leissa AW, McGee OG, and Huang CS (1993), Vibrations of sectorial plates having corner stress singularities, ASME J. Appl. Mech. 60, 134-140.
123. Gregory RD, Chonghua G, and Wan FYM (1996), The cantilever strip under torsion, bending or flexure at infinity, J. Elast. 43, 109-136.
124. Williams ML (1961), The bending stress distribution at the base of a stationary crack, ASME J. Appl. Mech. 28, 78-82.
125. Williams ML (1957), On the stress distribution at the base of a stationary crack, ASME J. Appl. Mech. 24, 109-114.
126. Irwin GR (1957), Analysis of stresses and strains near the end of a crack traversing a plate, ASME J. Appl. Mech. 24, 361-364.
127. Sinclair GB (2000), Logarithmic stress singularities resulting from various boundary conditions in angular corners of plates under bending, ASME J. Appl. Mech. 67, 219-223.
128. Nádai A (1925), The Elastic Plate (German), Julius Springer Publ, Berlin, Germany.
129. Sih GC, and Rice JR (1964), The bending of plates of dissimilar materials with cracks, ASME J. Appl. Mech. 31, 477-482.
130. Huang CS (2002), Corner singularities in bi-material Mindlin plates, Compos. Struct. 56, 315-327.
131. Reissner E (1945), The effect of transverse shear deformation on the bending of elastic plates, ASME J. Appl. Mech. 12, A-69-A-77.
132. Hencky H (1947), On the treatment of shear rotations in flat plates (German), Oesterr. Ing.-Arch. 16, 72-76.
133. Burton WS, and Sinclair GB (1986), On the singularities in Reissner's theory for the bending of elastic plates, ASME J. Appl. Mech. 53, 220-222.
134. Yen DHY, and Zhou M (1989), On the corner singularities in Reissner's theory for the bending of elastic plates, ASME J. Appl. Mech. 56, 726-729.
135. Huang CS, McGee OG, and Leissa AW (1994), Exact analytical solutions for free vibrations of thick sectional plates with simply supported radial edges, Int. J. Solids Struct. 31, 1609-1631.
136. Knowles JK, and Wang N-M (1960), On the bending of an elastic plate containing a crack, Z. Agnew Math. Phys. 39, 223-236.
137. Hartranft RJ, and Sih GC (1968), Effect of plate thickness on the bending stress distribution around through cracks, Z Agnew Math. Phys. 47, 276-291.
138. Wang N-M (1968), Effects of plate thickness on the bending of an elastic plate containing a crack, Z Agnew Math. Phys. 47, 371-390.
139. Hartranft RJ (1966), On some problems involving singularities in Reissner's theory of plate bending, Doctoral dissertation, Lehigh Univ, Bethlehem, PA.
140. Abramowitz M, and Stegun IA (1965), Handbook of Mathematical Functions, Dover Publ, New York, NY.
141. Bažant ZP, and Keer LM (1974), Singularities of elastic stresses and of harmonic functions at conical notches or inclusions, Int. J. Solids Struct. 10, 957-964.
142. Thomson TR, and Little RW (1970), End effects in a truncated semiinfinite cone, Q. J. Mech. Appl. Math. 23, 185-195.
143. Beagles AE, and Sändig A-M (1991), Singularities of rotationally symmetric solutions of boundary value problems for the Lamé equations, Z. Angew. Math. Mech. 71, 423-431.
144. Love AEH (1939), Boussinesq's problem for a rigid cone, Q. J. Math. 10, 161-175.
145. Hanson MT (1993), The elastic field for a sliding conical punch on an isotropic half-space, ASME J. Appl. Mech. 60, 557-559.
146. Keer LM, and Parihar KS (1978), Elastic stress singularity at conical inclusions, Int. J. Solids Struct. 14, 261-263.
147. Reissner E, and Sagoci HF (1944), Forced torsional oscillations of an elastic half-space: I, J. Appl. Phys. 15, 652-654.
148. Tsuji T, Noda N, Shibuya T, and Koizumi T (1990), Stress singularity at the bottom of a V-notch in the inner surface of a circular pipe under torsion, Int. J. Pressure Vessels Piping 42, 135-155.
149. Freeman NJ, and Keer LM (1967), Torsion of a cylindrical rod welded to an elastic half space, ASME J. Appl. Mech. 34, 687-692.
150. Westmann RA (1968), Discussion of "Torsion of a cylindrical rod welded to an elastic half space," ASME J. Appl. Mech. 35, 197-198.
151. Keer LM, and Freeman NJ (1969), Torsion of a finite elastic cylindrical rod partially bonded to an elastic half space, Q. Appl. Math. 26, 567-573.
152. Barton MV (1941), The circular cylinder with a band of uniform pressure on a finite length of the surface, ASME J. Appl. Mech. 8, A-97-A-104.
153. Zate AR (1964), Stresses in the vicinity of boundary discontinuities in bodies of revolution, ASME J. Appl. Mech. 31, 150-152.
154. Sneddon IN (1946), The distribution of stress in the neighborhood of a crack in an elastic solid, Proc. R. Soc. London, Ser. A A187, 229-260.
155. Harding JW, and Sneddon IN (1945), The elastic stresses produced by the indentation of the plane surface of a semi-infinite elastic solid by a rigid punch, Proc. Cambridge Philos. Soc. 41, 16-26.
156. Benthem JP, and Minderhoud P (1972), The problem of the solid cylinder compressed between rough rigid stamps, Int. J. Solids Struct. 8, 1027-1042.
157. Agarwal VK (1978), Axisymmetric solution of the end-problem for semi-infinite elastic circular cylinder and its application to joined dissimilar cylinders under uniform tension, Int. J. Eng. Sci. 16, 985-998.
158. Hartranft RJ, and Sih GC (1977), Stress singularity for a crack with an arbitrarily curved front, Eng. Fract. Mech. 9, 705-718.
159. Sadowsky MA, and Sternberg E (1949), Stress concentration around a triaxial ellipsoidal cavity, ASME J. Appl. Mech. 16, 149-157.
160. Green AE, and Sneddon IN (1950), The distribution of stress in the neighborhood of a flat elliptical crack in an elastic solid, Proc. Cambridge Philos. Soc. 46, 159-164.
161. Kassir MK, and Sih GC (1966), Three-dimensional stress distribution around an elliptical crack under arbitrary loadings, ASME J. Appl. Mech. 33, 601-611.
162. Galin LA (1948), Determination of displacements in three-dimensional contact problems of the theory of elasticity (Russian), Prikl. Mat. Mekh. 12, 241-250.
163. Mindlin RD (1949), Compliance of elastic bodies in contact, ASME J. Appl. Mech. 16, 259-268.
164. Hughes WF, and Gaylord EW (1964), Basic Equations of Engineering Science, Schaum Publ Co, New York, NY.
165. Love AEH (1929), The stress produced in a semi-infinite solid by pressure on part of the boundary, Philos. Trans. R. Soc. London, Ser. A A228, 397-420.
166. Turteltaub MJ, and Wheeler LT (1976), Line integral representations for the traction problem of the elastic halfspace and their application to a study of the singular effects of load jumps, J. Elast. 6, 161-178.
167. Michell JH (1902), The inversion of plane stress, Proc. London Math. Soc. 34, 134-142.
168. Green AE, and Zerna W (1968), Theoretical Elasticity, 2nd Edition, Oxford at Clarendon Press, UK.
169. Smith FW, and Alavi MJ (1971), Stress intensity factors for a penny shaped crack in a half space, Eng. Fract. Mech. 3, 241-254.
170. Shah RC, and Kobayashi AS (1973), Stress intensity factors for an elliptical crack approaching the surface of a semi-infinite solid, Int. J. Fract. 9, 133-146.
171. Liao CY, and Atluri SN (1989), Stress intensity factor variation along a semicircular surface flaw in a finite-thickness plate, Eng. Fract. Mech. 34, 957-976.
172. Galin LA (1947), Pressure of a stamp with a flat base in the form of an infinite wedge on an elastic half-space (Russian), Dokl. Akad. Nauk SSSR 58(2).
173. Rvachev VL (1959), The pressure on an elastic half-space of a stamp with a wedge-shaped planform, J. Appl. Math. Mech. 23, 229-233.
174. Noble B (1959), The potential and charge distribution near the tip of a flat angular sector, Report NYU EM-135, New York Univ, New York, NY.
175. Aleksandrov VM, and Babeshko VA (1972), On the pressure on an elastic half-space of a wedge-shaped stamp, J. Appl. Math. Mech. 36, 78-83.
176. Bažant ZP (1974), Three-dimensional harmonic functions near termination or intersection of gradient intersection lines: A general numerical method, Int. J. Eng. Sci. 12, 221-243.
177. Waiden H (1974), Solution of an eigenvalue problem for the Laplace operator on a spherical surface, Report X-582-74-41, Goddard Space Flight Center, Greenbelt, MD.
178. Morrison JA, and Lewis JA (1976), Charge singularity at the corner of a flat plate, SIAM (Soc. Ind. Appl. Math.) J. Appl. Math. 31, 233-250.
179. Brothers PW (1976), The rigid rectangular punch on the elastic half-space, Masters thesis, Univ of Auckland, Auckland, New Zealand.
180. Keer LM, and Parihar KS (1978), A note on the singularity at the corner of a wedge-shaped punch or crack, SIAM (Soc. Ind. Appl. Math.) J. Appl. Math. 34, 297-302.
181. Ioakimidis NI (1985), Determination of the order of singularity at the apex of a wedge-shaped crack, Eng. Fract. Mech. 22, 369-373.
182. Takakuda K (1985), Stress singularities near crack front edges, Bull. Japan Soc. Mech. Engineers 28, 225-231.
183. Xu L, and Kundu T (1995), Stress singularities at crack corners, J. Elast. 39, 1-16.
184. Glushkov E, Glushkova N, and Lapina O (1999), 3D elastic stress singularity at polyhedral corner points, Int. J. Solids Struct. 36, 1105-1128.
185. Parihar KS, and Keer LM (1978), Stress singularity at the corner of a wedge-shaped crack or inclusion, ASME J. Appl. Mech. 45, 791-796.
186. Parihar KS, and Keer LM (1979), The singularity at the apex of a bonded wedge-shaped stamp, ASME J. Appl. Mech. 46, 577-580.
187. Abramov BM (1937), The problem of contact of an elastic infinite half-plane with an absolutely rigid rough foundation, C. R. (Dokl.) Acad. Sci. URSS 17, 173-178.
188. Abdel-Messieh YS, and Thatcher RW (1990), Estimating the form of some three-dimensional singularities, Commun. Appl. Numer. Methods 6, 333-341.
189. Schmilz H, Volk K, and Wendland W (1993), Three-dimensional singularities of elastic fields near vertices, Numer. Methods Partial Differ. Equ. 9, 323-337.
190. Panasyuk VV, Andrejkiv AE, and Stadnik MM (1980), Basic mechanical concepts and mathematical techniques in application to three-dimensional crack problems: A review, Eng. Fract. Mech. 13, 925-937.
191. Panasyuk VV, Andrejkiv AE, and Stadnik MM (1981), Three-dimensional static crack problems solution (A review), Eng. Fract. Mech. 14, 245-260.
192. Sih GC (1971), A review of the three-dimensional stress problem for a cracked plate, Int. J. Fract. Mech. 7, 39-61.
193. Folias ES (1975), On the three-dimensional theory of cracked plates, ASME J. Appl. Mech. 42, 663-674.
194. Kawai T, Fujitani Y, and Kumagai K (1977), Analysis of singularity at the root of the surface crack problem, Proc of Int Conf on Fracture Mechanics and Technology, Hong Kong, 1157-1163.
195. Benthem JP (1977), State of stress at the vertex of a quarter-infinite crack in a half-space, Int. J. Solids Struct. 13, 479-492.
196. Bažant ZP and Estenssoro LF (1977), General numerical method for three-dimensional singularities in cracked or notched elastic solids, Proc of 4th Int Conf on Fracture, Vol 3, Waterloo, Ontario, 371-383.
197. Bažant ZP, and Estenssoro LF (1977), Stress singularity and propagation of cracks at their intersection with surfaces, Structural Engineering Report 77-12/480, Dept of Civil Eng, Northwestern Univ, Evanston, IL.
198. Bažant ZP, and Estenssoro LF (1979), Surface singularity and crack propagation, Int. J. Solids Struct. 15, 405-426
199. ( See also: Addendum (1980), ibid. 16, 479-481, and Erratum (1983), ibid. 19, 661 ).
200. Sinclair GB (1979), Asymptotic singular eigenfunctions for the three-dimensional crack, Proc of 7th Canadian Congress of Applied Mechanics, Sherbrooke, Quebec, 295-296.
201. Benthem JP (1980), The quarter-infinite crack in a half-space: Alternative and additional solutions, Int. J. Solids Struct. 16, 119-130.
202. Yamada Y, and Okumura H (1981), Analysis of local stress in composite materials by the 3D finite element, Proc of Japan-US Conf on Composite Materials, Tokyo, Japan, 55-84.
203. Burton WS, Sinclair GB, Solecki JS, and Swedlow JL (1984), On the implications for LEFM of the three-dimensional aspects in some crack-surface intersection problems, Int. J. Fract. 25, 3-32.
204. Shaofu W, Xing Z, and Qingzhi H (1988), Functional variable displacement method in analysis of singularity near the corner point in a three-dimensional cracked solid, Eng. Fract. Mech. 31, 191-200.
205. Shivakumar KN, and Raju IS (1990), Treatment of singularities in cracked bodies, Int. J. Fract. 45, 159-178.
206. Zhu WX (1990), Singular stress field of three-dimensional crack, Eng. Fract. Mech. 36, 239-244.
207. Barsoum RS, and Chen T-K (1991), Three-dimensional surface singularity of an interface crack, Int. J. Fract. 50, 221-237.
208. Ghahremani F (1991), A numerical variational method for extracting 3D singularities, Int. J. Solids Struct. 27, 1371-1386.
209. Leung AYT, and Su RKL (1996), Order of the singular stress field of through-thickness cracks, Int. J. Fract. 75, 85-93.
210. Leung AYT, and Su RKL (1996), Analytical solution for mode I crack orthogonal to free surface, Int. J. Fract. 76, 79-85.
211. Su XM, and Sun CT (1996), On singular stress of the crack tip of a thick plate under in-plane loading, Int. J. Fract. 82, 237-252.
212. Lur'e AI (1964), Three-Dimensional Problems of the Theory of Elasticity, Interscience Publ, John Wiley and Sons, New York, NY.
213. Benthem JP, and Koiter WT (1976), Discussion of "On the three-dimensional theory of cracked plates," ASME J. Appl. Mech. 43, 374.
214. Folias ES (1976), Authors closure to discussion of "On the three-dimensional theory of cracked plates," ASME J. Appl. Mech. 43, 374-375.
215. Folias ES (1980), Method of solution of a class of three-dimensional elastostatic problems under mode I loading, Int. J. Fract. 16, 335-348.
216. Meda G, Messner TW, Sinclair GB, and Solecki JS (1998), Pathindependent H integrals for three-dimensional fracture mechanics, Int. J. Fract. 94, 217-234.
217. Ghahremani F, and Shih CF (1992), Corner singularities of three-dimensional planar interface cracks, ASME J. Appl. Mech. 59, 61-68.
218. Sagochi HF (1944), Forced torsional oscillations of an elastic half-space: II, J. Appl. Phys. 15, 655-662.
219. Leissa AW (2001), Singularity considerations in membrane, plate and shell behaviors, Int. J. Solids Struct. 38, 3341-3353.
220. Achenbach JD, and Bažant ZP (1975), Elastodynamic near-tip stress and displacement fields for rapidly propagating cracks in orthotropic materials, ASME J. Appl. Mech. 42, 183-189.
221. Nowacki W (1968), Thermoelasticity, 2nd Edition, Pergamon Press, Oxford, UK.
222. 1/2(ln r) singularities at interface cracks in monoclinic and isotropic bimaterials due to heat flow, ASME J. Appl. Mech. 60, 432-437.
223. Yang YY, and MÜnz D (1995), Stress intensity factor and stress dis tribution in a joint with an interface corner under thermal and mechanical loading, Comput. Struct. 57, 467-476.
224. Lee EH (1955), Stress analysis in visco-elastic bodies, Q. Appl. Math. 13, 183-190.
225. Williams ML (1962), The fracture of viscoelastic materials, Fracture of Solids, Proc of an Int Conf, Maple Valley, WA, 157-188.
226. Ting TCT (1986), Anisotropic Elasticity, Oxford Univ Press, New York, NY.
227. Ting TCT (1998), The remarkable nature of cylindrically uniform anisotropic elastic materials, Proc of 13th US Natl Congress of Applied Mechanics, TA7.
228. Muki R, and Sternberg E (1965), The influence of couple-stresses on singular stress concentrations in elastic solids, Z. Angew. Math. Phys. 16, 611-648.
229. Sternberg E, and Muki R (1967), The effect of couple-stresses on the