Calculated phase diagrams, iron tolerance limits, and corrosion of Mg-Al alloys

JOM

Volumn 60, Issue 12, 2008, Pages 39-44

  Liu, Ming ^a,b   Uggowitzer, Peter J ^c   Schmutz, Patrik ^b   Atrens, Andrej ^a,b  

^a UNIVERSITY OF QUEENSLAND   (Australia)

^b SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^c ETH ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

HIGH-PURITY; IRON IMPURITIES; MG-AL ALLOYS; TOLERANCE LIMITS;

CERIUM ALLOYS; CORROSION; GRAPHIC METHODS; MAGNESIUM; MAGNESIUM ALLOYS; MAGNESIUM PRINTING PLATES; PHASE DIAGRAMS;

MAGNESIUM CASTINGS;

EID: 67349250776     PISSN: 10474838     EISSN: 15431851     Source Type: Journal    
DOI: 10.1007/s11837-008-0164-2     Document Type: Review

References (72)

1. G. Song and A. Atrens, Advanced Engineering Materials, 1 (1999), p. 11.
2. G.L. Song and A. Atrens, Advanced Engineering Materials, 5 (2003), p. 837.
3. G. Song and A. Atrens, Advanced Engineering Materials, 9 (2007), pp. 177-183.
4. G.L. Makar and J. Kruger, International Materials Reviews, 38 (1993), p. 138.
5. J.D. Hanawalt, C.E. Nelson, and J.A. Peloubet, Trans. AIME, 147 (1942), p. 273.
6. K.N. Reichek, K.L. Clark, and J.E. Hillis, SAE Technical Paper 850417 (Warrendale, PA: SAE, 1985).
7. A. Froats et al., Metal Handbook, 9th ed., Vol. 13 (Materials Park, OH: ASM International, 1987), pp. 740-754.
8. O. Lunder, T.K. Aune, and K. Nisancioglu, Corrosion, 43 (1987), p. 291.
9. J.E. Hillis, SAE Technical Paper 830523 (Warrendale, PA: SAE, 1983).
10. J.E. Hillis and S.O. Shook, SAE Technical Paper 890205 (Warrendale, PA: SAE, 1989).
11. J.E. Hillis and R.W. Murray (Presentation at the SDCE 14th International Die Casting Congress and Exposition, Toronto, Canada, 1987), Paper No. G-T87-003.
12. J.E. Hillis and K.N. Reichek, SAE Technical Paper 860288 (Warrendale, PA: SAE, 1986).
13. W.E. Mercer II and J.E. Hillis, SAE Technical Paper 920073 (Warrendale, PA: SAE, 1992).
14. O. Lunder et al., Corrosion, 45 (1989), p. 741.
15. G. Song, A.L. Bowles, and D.H. St. John, Materials Science and Engineering A, 366 (2004), p. 74.
16. R. Ambat, N.N. Aung, and Z. Zhou, Corrosion Science, 42 (2000), p. 1433.
17. G. Song, A. Atrens, and M. Dargusch, Corrosion Science, 41 (1998), p. 249.
18. Z. Shi, G. Song, and A. Atrens, Corrosion Science, 47 (2005), p. 2760.
19. A. Pardo et al., Corrosion Science, 50 (2008), p. 823.
20. A. Prado et al., Electrochimica Acta, 53 (2008), p. 7890.
21. M.C. Zhao et al., Advanced Engineering Materials, 10 (2008), p. 104.
22. Z. Shi, G. Song, and A. Atrens, Surface and Coatings Technology, 201 (2006), p. 492.
23. G. Song and D. StJohn, Journal of Light Metals, 2 (2002), p. 1.
24. G. Ballerini et al., Corrosion Science, 47 (2005), pp. 2173-2184.
25. Z. Xuehua et al., Corrosion Science, 48 (2006), p. 4223.
26. O. Lunder, K. Nisanccioglu, and R.S. Hansen (Presentation at Corrosion of Die Cast Magnesium-Aluminum Alloys, Detroit, MI, February/March 1993).
27. A. Srinivasan et al., Intermetallics, 15 (2007), pp. 1511-1517.
28. J. Zhang et al., Journal of Alloys and Compounds, (2008), doi:10.1016/ j.jallcom.2008.03.089.
29. M.B. Haroush et al., Corrosion Science, 50 (2008), p. 1766.
30. C. Scharf et al., Advanced Engineering Materials, 7 (2005), p. 1134.
31. C. Hoog, N. Birbilis, and Y. Estrin, Advanced Engineering Materials, 10 (2008), p. 579.
32. A. Atrens and W. Dietzel, Advanced Engineering Materials, 9 (2007), pp. 292-297.
33. S. Bender, J. Goellner, and A. Atrens, Advanced Engineering Materials, 10 (2008), p. 583.
34. M.C. Zhao et al., Advanced Engineering Materials, 10 (2008), p. 93.
35. M.C. Zhao et al., Corrosion Science, 50 (2008), p. 1939.
36. Ming-Chun Zhao et al., Corrosion Science, (2008), doi: 10.1016/ j.corsci.2008.08.023.
37. G.L. Song et al., Corrosion Science, 39 (1997), pp. 855-875.
38. G.L. Song et al., Corrosion Science, 39 (1997), pp. 1981-2004.
39. M. Liu et al., Scripta Materialia, 58 (2008), pp. 421-424.
40. J.X. Jia et al., Materials and Corrosion, 56 (2005), pp. 468-474.
41. J.X. Jia, G.L. Song, and A. Atrens, Corrosion Science, 48 (2006), pp. 2133-2153.
42. J.X. Jia, G. Song, and A. Atrens, Advanced Engineering Materials, 9 (2007), pp. 65-74.
43. Y. Wan et al., Materials & Design, 29 (2008), pp. 2034-2037.
44. Y. Wang et al., Materials Letters, 62 (2008), pp. 2181-2184.
45. M.B. Kannan and R.K. Singh Raman, Biomaterials, 29 (2008), pp. 2306-2314.
46. M. Jönsson, D. Persson, and C. Leygraf, Corrosion Science, 50 (2008), pp. 1406-1413.
47. T. Zhang et al., Electrochimica Acta, 53 (2007), pp. 561-568.
48. G. Ben-Hamu et al., Materials Science and Engineering: A, 452-453 (2007), pp. 210-218.
49. G. Song, Corrosion Science, 49 (2007), pp. 1696-1701.
50. M. Jönsson, D. Persson, and D. Thierry, Corrosion Science, 49 (2007), pp. 1540-1558.
51. J. Chen et al., Electrochimica Acta, 52 (2007), pp. 3299-3309.
52. N. Hara et al., Corrosion Science, 49 (2007), pp. 166-175.
53. X. Zhou et al., Corrosion Science, 48 (2006), pp. 4223-4233.
54. T. Zhang, Y. Li, and F. Wang, Corrosion Science, 48 (2006), pp. 1249-1264.
55. M.P. Staiger et al., Biomaterials, 27 (2006), pp. 1728-1734.
56. F. Witte et al., Biomaterials, 27 (2006), pp. 1013-1018.
57. A.-M. Lafront et al., Electrochimica Acta, 51 (2005), pp. 489-501.
58. G. Wu et al., Journal of Applied Electrochemistry, 38 (2008), pp. 251-257.
59. J.W. Chang et al., Journal of Applied Electrochemistry, 38 (2008), p. 207.
60. A.D. Südholz et al., Journal of Alloys and Compounds, (2008), doi:10.1016/j.allcom.2008.03.128.
61. N. Winzer et al., Advanced Engineering Materials, 7 (2005), pp. 659-693.
62. N. Winzer et al., Materials Science and Engineering A, 472 (2008), p. 97.
63. N. Winzer et al., Metallurgical and Materials Transactions A, 39 (2008), p. 1157.
64. M. Bobby Kannan et al., Materials Science and Engineering A, 480 (2008), pp. 529-539.
65. N. Winzer et al., Materials Science and Engineering A, 488 (2008), p. 339.
66. N. Winzer et al., Advanced Engineering Materials, 10 (2008), p. 453.
67. J. Chen et al., Materials Science and Engineering A, 488 (2008), pp. 428-434.
68. J. Chen et al., Electrochemistry Communications, 10 (2008), pp. 577-581.
69. H. Uchida et al., Environment-Induced Cracking of Materials, ed. S. Shipilov et al. (St. Louis, MO: Elsevier, 2008), pp. 323-332.
70. M. Bobby Kannan et al., Scripta Materialia, 57 (2007), pp. 579-581.
71. G. Song, A. Atrens, and D.H. StJohn, Magnesium Technology 2001, ed. J. Hryn (Warrendale, PA: TMS, 2001), p. 255.
72. Pandat software (CompuTherm, Madison, WI), www.computherm.com/ pandat.html.