Thermally sprayed coatings as interlayers for DLC-based thin films

Journal of Thermal Spray Technology

Volumn 18, Issue 2, 2009, Pages 231-242

  Bolelli, Giovanni ^a   Gualtieri, E ^a   Lusvarghi, L ^a   Pighetti Mantini, F ^a   Pitacco, F ^b   Valeri, S ^a   Volz, H ^b  

^a UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

^b Protec Surface Technologies Srl   (Italy)

Author keywords

Coating substrate interaction; Corrosion and electrochemical behavior; Friction and wear; Scratch testing

Indexed keywords

A CARBONS; BALL ON DISKS; CERAMIC INTERLAYERS; COATING-SUBSTRATE INTERACTION; CONTACT LOADS; CORROSION CURRENT DENSITIES; DIAMOND-LIKE CARBONS; ELECTROCHEMICAL POLARIZATION TESTS; FRICTION AND WEAR; HIGH VELOCITIES; ROOM TEMPERATURES; SCRATCH TESTING; SCRATCH TESTS; THERMALLY SPRAYED COATINGS; TRIBOLOGICAL PERFORMANCE;

ALUMINUM; BRITTLE FRACTURE; CARBON STEEL; CHROMIUM; COBALT; COMPOSITE FILMS; CORROSION; CORROSION RESISTANCE; DIAMOND FILMS; FRICTION; OXYGEN; PLASMAS; SODIUM COMPOUNDS; SPALLING; SUBSTRATES; THIN FILM DEVICES; THIN FILMS; WEAR RESISTANCE;

SPRAYED COATINGS;

EID: 67349211740     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-008-9286-x     Document Type: Conference Paper

References (40)

1. D.W. Wheeler, Chemical Vapour Deposition Methods for Protection against Wear, Surface Coatings for Protection against Wear, B.G. Mellor, Ed., Woodhead Publishing Limited, Abington Hall, Cambridge, England, 2006, p 129.
2. F.E. Kennedy, D. Lidhagen, A. Erdemir, J.B. Woodford, T. Kato, Tribological Behavior of Hard Carbon Coatings on Steel Substrates, Wear, 2003, 255, p 854-858.
3. G.A. Jones, On the Tribological Behaviour of Mechanical Seal Face Materials in Dry Line Contact: Part II. Bulk Ceramics, Diamond and Diamond-Like Carbon Films, Wear, 2004, 256, p 433-455.
4. A. Leyland, A. Matthews, On the Significance of the H/E Ratio in Wear Control: A Nanocomposite Coating Approach to Optimised Tribological Behaviour, Wear, 2000, 246, p 1-11.
5. K. Holmberg, A. Laukkanen, H. Ronkainen, K. Wallin, S. Varjus, J. Koskinen, Tribological Contact Analysis of a Rigid Ball Sliding on a Hard Coated Surface: Part II: Material Deformations, Influence of Coating Thickness and Young's Modulus, Surf. Coat. Technol., 2006, 200, p 3810-3823.
6. S.A.G. Oliveira, A.F. Bower, An Analysis of Fracture and Delamination in Thin Coatings Subjected to Contact Loading, Wear, 1996, 198, p 15-32.
7. J. Jiang, R.D. Arnell, J. Tong, Some Special Tribological Features of DLC Coatings Deposited on Soft Substrates, Wear, 1997, 211, p 254-264.
8. B. Podgornik, J. Vižintin, Influence of Substrate Treatment on the Tribological Properties of DLC Coatings, Diamond Relat. Mater., 2001, 10, p 2232-2237.
9. Y. Liu, E.I. Meletis, Tribological Behavior of DLC Coatings with Functionally Gradient Interfaces, Surf. Coat. Technol., 2002, 153, p 178-183.
10. R. Gadow, D. Scherer, Composite Coatings with Dry Lubrication Ability on Light Metal Substrates, Surf. Coat. Technol., 2000, 151-152, p 471-477.
11. F. Casadei, R. Pileggi, R. Valle, A. Matthews, Studies on a Combined Reactive Plasma Sprayed/Arc Deposited Duplex Coating for Titanium Alloys, Surf. Coat. Technol., 2006, 201, p 1200-1206.
12. E. Bemporad, M. Sebastiani, F. Casadei, F. Carassiti, Modelling, Production and Characterisation of Duplex Coatings (HVOF and PVD) on Ti-6Al-4 V Substrate for Specific Mechanical Applications, Surf. Coat. Technol., 2007, 201, p 7652-7662.
13. 3/DLC Coatings on Al Alloys for Tribological Applications Using a Combined Micro-Arc Oxidation and Plasma-Immersion Ion Implantation Technique, Surf. Coat. Technol., 2000, 131, p 506-513.
14. 3/ TiN Coatings on Aluminum Alloys for Tribological Applications Using a Combined Microplasma Oxidation (MPO) and Arc Ion Plating (AIP), Wear, 2006, 260, p 215-222.
15. G. Bolelli, L. Lusvarghi, F. Pighetti Mantini, F. Pitacco, H. Volz, Enhanced Tribological Properties of PECVD DLC Coated Thermally Sprayed Coatings, Surf. Coat. Technol., 2008, 202, p 4382-4386.
16. J.M. Guilemany, J. Nin, Thermal Spraying Methods for Protection against Wear, Surface Coatings for Protection against Wear, B.G. Mellor, Ed., Woodhead Publishing Limited, Abington Hall, Cambridge, England, 2006, p. 249.
17. H. Herman, S. Sampath, R. McCune, Thermal Spray: Current Status and Future Trends, MRS Bulletin, 2000, 25(7), p 17-25.
18. J.R. Davis, Handbook of Thermal Spray Technology, ASM International, Materials Park, OH, USA, 2004, p. 169.
19. G. Bolelli, V. Cannillo, L. Lusvarghi, T. Manfredini, Wear Behaviour of Thermally Sprayed Ceramic Oxide Coatings, Wear, 2006, 261, p 1298-1315.
20. G. Bolelli, V. Cannillo, L. Lusvarghi, S. Riccò, Mechanical and Tribological Properties of Electrolytic Hard Chrome and HVOF-Sprayed Coatings, Surf. Coat. Technol., 2006, 200, p 2995-3009.
21. J. Jiang, R.D. Arnell, The Effect of Substrate Surface Roughness on the Wear of DLC Coatings, Wear, 2000, 239, p 1-9.
22. 3 Ratio in Amorphous Carbon Structure by XPS and XAES, Appl. Surf. Sci., 1991, 47, p 17-21.
23. W.C. Oliver, G.M. Pharr, An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments, J. Mater. Res., 1992, 7, p 1564-1583.
24. S.J. Bull, Failure Modes in Scratch Adhesion Testing, Surf. Coat. Technol., 1991, 50, p 25-32.
25. P.J. Burnett, D.S. Rickerby, The Mechanical Properties of Wear-Resistant Coatings: I: Modelling of Hardness Behaviour, Thin Solid Films, 1987, 148, p 41-50.
26. J. Lesage, A. Pertuz, E.S. Puchi-Cabrera, D. Chicot, A Model to Determine the Surface Hardness of Thin Films from Standard Micro-Indentation Tests, Thin Solid Films, 2006, 497, p 232-238.
27. G. Antou, G. Montavon, F. Hlawka, A. Cornet, C. Coddet, Exploring Thermal Spray Gray Alumina Coating Pore Network Architecture by Combining Stereological Protocols and Impedance Electrochemical Spectroscopy, J. Therm. Spray Technol., 2006, 15, p 765-772.
28. G. Antou, G. Montavon, F. Hlawka, A. Cornet, C. Coddet, Characterizations of the Pore-Crack Network Architecture of Thermal-Sprayed Coatings, Mater. Charact., 2004, 53, p 361-372.
29. K.H. Lau, K.Y. Li, Y-W. Mai, Influence of Hardness Ratio on Scratch Failure of Coatings, Int. J. Surf. Sci. Eng., 2007, 1, p 3-21.
30. J. Jiang, R.D. Arnell, J. Tong, The Effect of Substrate Properties on Tribological Behaviour of Composite DLC Coatings, Tribol. Int., 1997, 30, p 613-625.
31. D-H. Kim, H-E. Kim, K-R. Lee, C-N. Whang, I-S. Lee, Characterization of Diamond-Like Carbon Films Deposited on Commercially Pure Ti and Ti-6Al-4 V, Mater. Sci. Eng. C, 2002, 22, p 9-14.
32. E. Sánchez-González, P. Miranda, J.J. Meléndez-Martínez, F. Guiberteau, A. Pajares, Temperature Dependence of Mechanical Properties of Alumina up to the Onset of Creep, J. Eur. Ceram. Soc., 2007, 27, p 3345-3349.
33. 3, Surf. Coat. Technol., 1989, 39-40, p 701-709.
34. M. Fukumoto, Y. Wada, M. Umemoto, I. Okane, Effect of Connected Pores on the Corrosion Behavior of Plasma Sprayed Alumina Coatings, Surf. Coat. Technol., 1989, 39-40, p 711-720.
35. G. Bolelli, V. Cannillo, R. Giovanardi, L. Lusvarghi, Electrochemical Comparison between Corrosion Resistance of some Thermally Sprayed Coatings, Int. J. Surf. Sci. Eng., 2008, 2(3-4), p 222-239.
36. T.E. Lister, R.N. Wright, P.J. Pinhero, W.D. Swank, Corrosion of Thermal Spray Hastelloy C-22 Coatings in Dilute HCl, J. Therm. Spray Technol., 2002, 11, p 530-535.
37. D. Zhang, S.J. Harris, D.G. McCartney, Microstructure Formation and Corrosion Behaviour in HVOF-Sprayed Inconel 625 Coatings, Mater. Sci. Eng. A, 2003, 344, p 45-56.
38. G. Bolelli, R. Giovanardi, L. Lusvarghi, T. Manfredini, Corrosion Resistance of HVOF-Sprayed Coatings for Hard Chrome Replacement, Corros. Sci., 2006, 48, p 3375-3397.
39. C. Monticelli, A. Frignani, F. Zucchi, Investigation on the Corrosion Process of Carbon Steel Coated by HVOF WC/Co Cermets in Neutral Solution, Corros. Sci., 2004, 46, p 1225-1237.
40. A. Neville, T. Hodgkiess, Corrosion Behaviour and Microstructure of two Thermal Spray Coatings, Surf. Eng., 1996, 12, p 303-312.