메뉴 건너뛰기




Volumn , Issue , 2007, Pages 342-

Primer on Flat Rolling

Author keywords

[No Author keywords available]

Indexed keywords


EID: 67349193374     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-08-045319-4.X5000-1     Document Type: Book
Times cited : (104)

References (362)
  • 2
    • 84882166049 scopus 로고    scopus 로고
    • AISI website, "Tailor-Welded Blanks Expected to Soar Through 2000".
    • AISI website, "Tailor-Welded Blanks Expected to Soar Through 2000".
  • 3
    • 0000562448 scopus 로고
    • On the Theory of Rolling
    • Alexander J.M. On the Theory of Rolling. R Soc. London 1972, 326:535-563.
    • (1972) R Soc. London , vol.326 , pp. 535-563
    • Alexander, J.M.1
  • 5
    • 0015667921 scopus 로고
    • An Experimental Determination of the Roll Pressure Distribution in Cold Rolling
    • Al-Salehi F.A.K., Firbank T.C., Lancaster P.G. An Experimental Determination of the Roll Pressure Distribution in Cold Rolling. Int J. Mech. Sci. 1973, 15:693-710.
    • (1973) Int J. Mech. Sci. , vol.15 , pp. 693-710
    • Al-Salehi, F.A.K.1    Firbank, T.C.2    Lancaster, P.G.3
  • 6
    • 85069396455 scopus 로고
    • Flow Stress of Metals and its Application in Metal Forming Analysis
    • Altan T., Boulger F.W. Flow Stress of Metals and its Application in Metal Forming Analysis. ASME, J Eng. Ind. 1973, 95:1009-1019.
    • (1973) ASME, J Eng. Ind. , vol.95 , pp. 1009-1019
    • Altan, T.1    Boulger, F.W.2
  • 8
    • 0004258899 scopus 로고
    • American Society of Metals
    • ASM Handbook 1985, American Society of Metals.
    • (1985) ASM Handbook
  • 11
    • 0003131426 scopus 로고
    • Limits to Adhesive Friction
    • J.L. Chenot, R.D. Wood, O.C. Zienkiewicz (Eds.)
    • Azarkhin A., Richmond O. Limits to Adhesive Friction. Num. Meth. Ind. Form. Proc. 1992, 143-148. J.L. Chenot, R.D. Wood, O.C. Zienkiewicz (Eds.).
    • (1992) Num. Meth. Ind. Form. Proc. , pp. 143-148
    • Azarkhin, A.1    Richmond, O.2
  • 12
    • 0018017663 scopus 로고
    • Determination of Oil Film Thickness in Rolling from the Relationship between Surface Roughness of Strip and Roll
    • Azushima A. Determination of Oil Film Thickness in Rolling from the Relationship between Surface Roughness of Strip and Roll. Bulletin of the JSME 1978, 21:1402-1407.
    • (1978) Bulletin of the JSME , vol.21 , pp. 1402-1407
    • Azushima, A.1
  • 13
    • 0034287364 scopus 로고    scopus 로고
    • FEM Analysis of Hydrostatic Pressure Generated Within Lubricant Entrapped into Pocket on Workpiece Surface in Upsetting Pro-cess
    • Azushima A. FEM Analysis of Hydrostatic Pressure Generated Within Lubricant Entrapped into Pocket on Workpiece Surface in Upsetting Pro-cess. ASME, JTrib 2000, 122:822-827.
    • (2000) ASME, JTrib , vol.122 , pp. 822-827
    • Azushima, A.1
  • 14
  • 15
    • 0015491106 scopus 로고
    • Experimental Determination of Normal Pressure and Friction Stress in the Rolling Gap During Cold Rolling
    • Banerji A., Rice W.B. Experimental Determination of Normal Pressure and Friction Stress in the Rolling Gap During Cold Rolling. Annalsof the CIRP 1972, 21:53-54.
    • (1972) Annalsof the CIRP , vol.21 , pp. 53-54
    • Banerji, A.1    Rice, W.B.2
  • 16
    • 0005015153 scopus 로고
    • Frictional Effect s on Flow Stress Determination at High Temperatures and Strain Rates
    • Baragar D.L., Crawley A.F. Frictional Effect s on Flow Stress Determination at High Temperatures and Strain Rates. J. Mech. Working Techn. 1984, 9:291-299.
    • (1984) J. Mech. Working Techn. , vol.9 , pp. 291-299
    • Baragar, D.L.1    Crawley, A.F.2
  • 20
    • 0018471231 scopus 로고
    • Cold Pressure Welding - The Mechanisms Governing Bonding
    • Bay N. Cold Pressure Welding - The Mechanisms Governing Bonding. ASME, J. Eng. Ind. 1979, 101:121-127.
    • (1979) ASME, J. Eng. Ind. , vol.101 , pp. 121-127
    • Bay, N.1
  • 21
    • 0022737412 scopus 로고
    • Cold Welding Part 1: Characteristics, Bonding Mechanisms,Bond Strength
    • Bay N. Cold Welding Part 1: Characteristics, Bonding Mechanisms,Bond Strength. Metal Construction 1986, 18:369-372.
    • (1986) Metal Construction , vol.18 , pp. 369-372
    • Bay, N.1
  • 22
    • 62449191416 scopus 로고    scopus 로고
    • Metallography and Microstructures of Low-Carbon and Coated Steels
    • ASM International, ASM Handbook
    • Benscoter A.O., Bramfitt B.L. Metallography and Microstructures of Low-Carbon and Coated Steels. Metallography and Microstructures 2004, Vol 9:588-607. ASM International.
    • (2004) Metallography and Microstructures , vol.9 , pp. 588-607
    • Benscoter, A.O.1    Bramfitt, B.L.2
  • 24
    • 0026453933 scopus 로고
    • Modeling Microstructure and Its Effects During Multipass Hot Rolling
    • Beynon J.H., Sellars C.M. Modeling Microstructure and Its Effects During Multipass Hot Rolling. ISIJ Int. 1992, 32:339-367.
    • (1992) ISIJ Int. , vol.32 , pp. 339-367
    • Beynon, J.H.1    Sellars, C.M.2
  • 25
    • 0013431652 scopus 로고
    • Measuring, Modelling and Understanding Friction in the Hot Rolling of Steel
    • M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, I. Pillinger (Eds.)
    • Beynon J.H., Li Y.H., Krzyzanowski M., Sellars C.M. Measuring, Modelling and Understanding Friction in the Hot Rolling of Steel. Metal Forming 2000, Kraków, Poland 1900, 3-10. M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, I. Pillinger (Eds.).
    • (1900) Metal Forming 2000, Krako acute;w, Poland , pp. 3-10
    • Beynon, J.H.1    Li, Y.H.2    Krzyzanowski, M.3    Sellars, C.M.4
  • 26
    • 0019676105 scopus 로고
    • Tapering of Aluminium Rings During Ring Compression Test
    • Bhattacharyya D. Tapering of Aluminium Rings During Ring Compression Test. Proc. 9th NAMRC 1981, 133-139.
    • (1981) Proc. 9th NAMRC , pp. 133-139
    • Bhattacharyya, D.1
  • 29
    • 0001103472 scopus 로고
    • The Calculation of Roll Force and Torque in Cold Strip Rolling with Tensions
    • 144-133
    • Bland D.R., Ford H. The Calculation of Roll Force and Torque in Cold Strip Rolling with Tensions. Proc. I. Mech. E. 1948, 139. 144-133.
    • (1948) Proc. I. Mech. E. , vol.139
    • Bland, D.R.1    Ford, H.2
  • 33
    • 85017565177 scopus 로고    scopus 로고
    • Tertiary Rolled in Scale - the Hot Strip Mill Problem of the 1990's
    • 37th MWSP Conf.
    • Blazevic D.T. Tertiary Rolled in Scale - the Hot Strip Mill Problem of the 1990's. ISS-AIME 1996, XXXII:33-38.
    • (1996) ISS-AIME , vol.XXXII , pp. 33-38
    • Blazevic, D.T.1
  • 34
    • 84882049817 scopus 로고    scopus 로고
    • Rolling of Ultra-Thin Gauges in the Finishing Line of a Minimill
    • Bobig P., Stella F. Rolling of Ultra-Thin Gauges in the Finishing Line of a Minimill. Steel Grips 2004, 5:346-348.
    • (2004) Steel Grips , vol.5 , pp. 346-348
    • Bobig, P.1    Stella, F.2
  • 35
  • 36
    • 0000735377 scopus 로고
    • Effect of Chemical Composition on the Critical Temperatures of Microalloyed Steels
    • Tokyo. I. Tamura (Ed.)
    • Boratto F., Barbosa R., Yue S., Jonas J.J. Effect of Chemical Composition on the Critical Temperatures of Microalloyed Steels. Proc. THERMEC'88 1988, Tokyo. I. Tamura (Ed.).
    • (1988) Proc. THERMEC'88
    • Boratto, F.1    Barbosa, R.2    Yue, S.3    Jonas, J.J.4
  • 40
    • 0024912860 scopus 로고
    • The Influence of Strain Hardening on Cumulative Plastic Deformation in Rolling and Sliding Contact
    • Bower A.F., Johnson K.L. The Influence of Strain Hardening on Cumulative Plastic Deformation in Rolling and Sliding Contact. J Mech. Phys. Solids. 1989, 37:471-493.
    • (1989) J Mech. Phys. Solids. , vol.37 , pp. 471-493
    • Bower, A.F.1    Johnson, K.L.2
  • 41
    • 0001826355 scopus 로고    scopus 로고
    • Inverse Analysis for Identification of Parameters During Thermo-Mechanical Tests
    • Balkema, Rotterdam, K.A.A. Mori (Ed.)
    • Boyer B., Massoni E. Inverse Analysis for Identification of Parameters During Thermo-Mechanical Tests. Proceedings of NUMIFORM 2001 2001, 281-284. Balkema, Rotterdam. K.A.A. Mori (Ed.).
    • (2001) Proceedings of NUMIFORM 2001 , pp. 281-284
    • Boyer, B.1    Massoni, E.2
  • 44
    • 0020267494 scopus 로고
    • Simplified Roll-Temperature Model: Convective Cooling
    • Bryant G.F., Chiu T.S.L. Simplified Roll-Temperature Model: Convective Cooling. Metals Techn. 1982, 9:478-484.
    • (1982) Metals Techn. , vol.9 , pp. 478-484
    • Bryant, G.F.1    Chiu, T.S.L.2
  • 48
    • 0028282269 scopus 로고
    • A Model for Friction in Metal Forming
    • Carter W.T. A Model for Friction in Metal Forming. ASME J. Eng. Mat. Techn. 1994, 116:8-13.
    • (1994) ASME J. Eng. Mat. Techn. , vol.116 , pp. 8-13
    • Carter, W.T.1
  • 49
    • 0037427646 scopus 로고    scopus 로고
    • Tailor-Welded Blanks of Different Thickness Ratios Effects on Forming Limit Diagrams
    • Chan S.M., Chan L.C., Lee T.C. Tailor-Welded Blanks of Different Thickness Ratios Effects on Forming Limit Diagrams. J. Mat. Proc. Techn. 2003, 132:95-101.
    • (2003) J. Mat. Proc. Techn. , vol.132 , pp. 95-101
    • Chan, S.M.1    Chan, L.C.2    Lee, T.C.3
  • 50
    • 4344632270 scopus 로고    scopus 로고
    • A Rigid-Plastic Finite Element Analysis of Temper Rolling Process
    • Chandra S., Dixit U.S. A Rigid-Plastic Finite Element Analysis of Temper Rolling Process. J. Mat. Proc. Techn. 2004, 152:9-16.
    • (2004) J. Mat. Proc. Techn. , vol.152 , pp. 9-16
    • Chandra, S.1    Dixit, U.S.2
  • 51
    • 51249170138 scopus 로고
    • Fundamental Phenomena Governing Heat Transfer During Rolling
    • Chen W.C., Samarasekera I.V., Hawbolt E.B. Fundamental Phenomena Governing Heat Transfer During Rolling. Met. Trans. A 1993, 24:1307-1320.
    • (1993) Met. Trans. A , vol.24 , pp. 1307-1320
    • Chen, W.C.1    Samarasekera, I.V.2    Hawbolt, E.B.3
  • 53
    • 0033078679 scopus 로고    scopus 로고
    • Using Neural Networks to Predict Parameters in Hot Working of Aluminium Alloys
    • Chun M.S., Biglou J., Lenard J.G., Kim G. Using Neural Networks to Predict Parameters in Hot Working of Aluminium Alloys. J. Mat. Proc. Techn. 1999, 86:245-251.
    • (1999) J. Mat. Proc. Techn. , vol.86 , pp. 245-251
    • Chun, M.S.1    Biglou, J.2    Lenard, J.G.3    Kim, G.4
  • 54
    • 0022790320 scopus 로고
    • Cold Welding Part 3: Influence of Surface Preparation on Bond Strength
    • Clemenson C., Juelstorp O., Bay N. Cold Welding Part 3: Influence of Surface Preparation on Bond Strength. Metal Construction 1986, vol. 18:625-629.
    • (1986) Metal Construction , vol.18 , pp. 625-629
    • Clemenson, C.1    Juelstorp, O.2    Bay, N.3
  • 55
    • 0020970741 scopus 로고
    • Absolute Stability of Global Pattern Formation and Parallel Memory Storage by Competitive Neural Networks
    • Coben M., Grossberg S. Absolute Stability of Global Pattern Formation and Parallel Memory Storage by Competitive Neural Networks. IEEE Trans. on Systems, Man and Cybernetics 1983, SMC-13:815-825.
    • (1983) IEEE Trans. on Systems, Man and Cybernetics , vol.SMC-13 , pp. 815-825
    • Coben, M.1    Grossberg, S.2
  • 56
    • 0020258413 scopus 로고
    • Microstructural Changes during Thermomechanical Processing of X80 Pipeline Steels
    • The Met. Soc. of AIME, Pittsburgh, A.J. DeArdo, G.A. Ratz, P.J. Wray (Eds.)
    • Coldren A.P., Biss V., Oakwood T.G. Microstructural Changes during Thermomechanical Processing of X80 Pipeline Steels. Thermomechanical Processing of Microalloyed Austenite 1981, 591-611. The Met. Soc. of AIME, Pittsburgh. A.J. DeArdo, G.A. Ratz, P.J. Wray (Eds.).
    • (1981) Thermomechanical Processing of Microalloyed Austenite , pp. 591-611
    • Coldren, A.P.1    Biss, V.2    Oakwood, T.G.3
  • 57
    • 0043199599 scopus 로고
    • A Review of the Application of Pin Load-Cell Pressure Measurement Techniques to Metal Deformation Processes
    • Cole I.M., Sansome D.H. A Review of the Application of Pin Load-Cell Pressure Measurement Techniques to Metal Deformation Processes. Int. Machine Design Conf. 1968, 271-286.
    • (1968) Int. Machine Design Conf. , pp. 271-286
    • Cole, I.M.1    Sansome, D.H.2
  • 60
    • 0020302392 scopus 로고
    • The Effect of Microalloy Concentration on the Recrystallization of Austenite During Hot Deformation
    • A.J. DeArdo, G.A. Ratz, P.J. Wray (Eds.)
    • Cuddy L.J. The Effect of Microalloy Concentration on the Recrystallization of Austenite During Hot Deformation. Proc. Conf. Thermomechanical Processing of Microalloyed Austenite 1981, 129-140. A.J. DeArdo, G.A. Ratz, P.J. Wray (Eds.).
    • (1981) Proc. Conf. Thermomechanical Processing of Microalloyed Austenite , pp. 129-140
    • Cuddy, L.J.1
  • 66
    • 17544394814 scopus 로고
    • A Method for Determination of Constant and Varying Friction Factors During Ring Compression Tests
    • DePierre V., Gurney F. A Method for Determination of Constant and Varying Friction Factors During Ring Compression Tests. ASME, J. Lubr. Techn. 1974, 96:482-488.
    • (1974) ASME, J. Lubr. Techn. , vol.96 , pp. 482-488
    • DePierre, V.1    Gurney, F.2
  • 67
    • 0026102382 scopus 로고
    • The Thermal and Metallurgical State of Steel Strip During Hot Rolling: Part III. Microstructural Evolution
    • Devadas C., Samarasekera I.V., Hawbolt E.B. The Thermal and Metallurgical State of Steel Strip During Hot Rolling: Part III. Microstructural Evolution. Metall. Trans. 1991, 22A:335-349.
    • (1991) Metall. Trans. , vol.22 A , pp. 335-349
    • Devadas, C.1    Samarasekera, I.V.2    Hawbolt, E.B.3
  • 68
    • 23944468999 scopus 로고    scopus 로고
    • The Effect of Roll Roughness and Lubricant Viscosity on the Loads on the Mill During Cold Rolling of Steel Strips
    • Dick K., Lenard J.G. The Effect of Roll Roughness and Lubricant Viscosity on the Loads on the Mill During Cold Rolling of Steel Strips. J. Mat. Proc. Techn. 2005, 168:16-24.
    • (2005) J. Mat. Proc. Techn. , vol.168 , pp. 16-24
    • Dick, K.1    Lenard, J.G.2
  • 71
    • 23844554670 scopus 로고    scopus 로고
    • A Study of Lubrication Mechanism of Oil-in-Water (O/W) Emulsions in Steel Cold Rolling
    • Dubey S.P., Sharma G.K., Shishodia K.S., Sekhon G.S. A Study of Lubrication Mechanism of Oil-in-Water (O/W) Emulsions in Steel Cold Rolling. Ind. Lubr. Techn. 2005, 57:208-212.
    • (2005) Ind. Lubr. Techn. , vol.57 , pp. 208-212
    • Dubey, S.P.1    Sharma, G.K.2    Shishodia, K.S.3    Sekhon, G.S.4
  • 72
    • 0032021602 scopus 로고    scopus 로고
    • Applicability of Indentation Tests Assess Ductility in Hot Rolling of Aluminium Alloys
    • Duly D., Lenard J.G., Schey J.A. Applicability of Indentation Tests Assess Ductility in Hot Rolling of Aluminium Alloys. J. Mat. Proc. Techn. 1998, 75:143-151.
    • (1998) J. Mat. Proc. Techn. , vol.75 , pp. 143-151
    • Duly, D.1    Lenard, J.G.2    Schey, J.A.3
  • 73
    • 33749572168 scopus 로고    scopus 로고
    • Effect of Bending Process on Hydroformability of Steel
    • University of Waterloo, Canada
    • Dyment J. Effect of Bending Process on Hydroformability of Steel. thesis for the MASc degree 2004, University of Waterloo, Canada.
    • (2004) thesis for the MASc degree
    • Dyment, J.1
  • 74
    • 33644647994 scopus 로고    scopus 로고
    • Property Related Design of Advanced Cold Rolled Steels With Induced Plasticity
    • Ehrhardt B., Gerber T., Hofmann H., Schauman T.W. Property Related Design of Advanced Cold Rolled Steels With Induced Plasticity. Steel Grips 2004, 4:247-255.
    • (2004) Steel Grips , vol.4 , pp. 247-255
    • Ehrhardt, B.1    Gerber, T.2    Hofmann, H.3    Schauman, T.W.4
  • 75
    • 0348196195 scopus 로고
    • Analysis of Factors Influencing Rolling and Power Consumption in the Hot Rolling of Steel
    • Ekelund S. Analysis of Factors Influencing Rolling and Power Consumption in the Hot Rolling of Steel. Steel 1933, 93:27-29.
    • (1933) Steel , vol.93 , pp. 27-29
    • Ekelund, S.1
  • 76
    • 0008176890 scopus 로고
    • Factors Affecting Friction and Their Effect upon Load, Torque, and Spread in Hot Flat Rolling
    • El-Kalay A.K.E.H.A., Sparling L.G.M. Factors Affecting Friction and Their Effect upon Load, Torque, and Spread in Hot Flat Rolling. J. Iron Steel Inst. 1968, 43:152-168.
    • (1968) J. Iron Steel Inst. , vol.43 , pp. 152-168
    • El-Kalay, A.K.E.H.A.1    Sparling, L.G.M.2
  • 78
    • 0036510644 scopus 로고    scopus 로고
    • Effect of Temper Rolling on Tensile Properties of C-Mn Steels
    • Fang X., Fan Z., Ralph B., Evans P., Underhill R. Effect of Temper Rolling on Tensile Properties of C-Mn Steels. Mat. Sci. Techno. 2002, 18:285-288.
    • (2002) Mat. Sci. Techno. , vol.18 , pp. 285-288
    • Fang, X.1    Fan, Z.2    Ralph, B.3    Evans, P.4    Underhill, R.5
  • 79
    • 84882096671 scopus 로고
    • Platzer Planetary Mill for Hot High Reduction of Metal Strip
    • The Metals Society
    • Fink P., Buch E. Platzer Planetary Mill for Hot High Reduction of Metal Strip. Flat Rolling: A Comparison of Mill Types 1979, 73-81. The Metals Society.
    • (1979) Flat Rolling: A Comparison of Mill Types , pp. 73-81
    • Fink, P.1    Buch, E.2
  • 80
    • 0035322512 scopus 로고    scopus 로고
    • The Wear of Tool Steel Rolls During Hot Rolling of Low Carbon Steels
    • Fitzpatrick J.J., Lenard J.G. The Wear of Tool Steel Rolls During Hot Rolling of Low Carbon Steels. ASM 2001, 45-49.
    • (2001) ASM , pp. 45-49
    • Fitzpatrick, J.J.1    Lenard, J.G.2
  • 81
    • 31144435756 scopus 로고    scopus 로고
    • Material Applications in ULSAB-AVC
    • Flaxa V., Shaw J. Material Applications in ULSAB-AVC. Steel Grips 2003, (4).
    • (2003) Steel Grips , Issue.4
    • Flaxa, V.1    Shaw, J.2
  • 82
    • 0023118692 scopus 로고
    • Towards a New Theory of Cold Rolling Thin Foil
    • Fleck N.A., Johnson K.L. Towards a New Theory of Cold Rolling Thin Foil. Int. J. Mech. Sci. 1987, 29:507-524.
    • (1987) Int. J. Mech. Sci. , vol.29 , pp. 507-524
    • Fleck, N.A.1    Johnson, K.L.2
  • 85
    • 84882208270 scopus 로고    scopus 로고
    • Mathematical Modelling of a Temper Rolling Mill
    • Kraków, A.A. Balkema, Rotterdam
    • Fuchshumer S., Schlacher K. Mathematical Modelling of a Temper Rolling Mill. Metal Forming 2000 2000, 303-310. Kraków, A.A. Balkema, Rotterdam.
    • (2000) Metal Forming 2000 , pp. 303-310
    • Fuchshumer, S.1    Schlacher, K.2
  • 86
    • 0017958993 scopus 로고
    • Einfluss unterschiedlicher Warmwalz-bedingungen beim Bandwalzen auf die Walzoberfla die;che und deren Auswirking auf das Walzgut
    • Funke P., Holland J., Kulbrok R. Einfluss unterschiedlicher Warmwalz-bedingungen beim Bandwalzen auf die Walzoberfläche und deren Auswirking auf das Walzgut. Stahl und Eisen 1978, 98:403-409.
    • (1978) Stahl und Eisen , vol.98 , pp. 403-409
    • Funke, P.1    Holland, J.2    Kulbrok, R.3
  • 89
    • 0030165192 scopus 로고
    • An Inverse Analysis Using a Finite Element Model for Identification of Rheological Parameters
    • M. Pietrzyk, J. Kusiak, P. Hartley, I. Pillinger (Eds.) Proc. Metal Forming'96
    • Gavrus A., Massoni E., Chenot J.L. An Inverse Analysis Using a Finite Element Model for Identification of Rheological Parameters. J. Mat. Proc. Techn. 1995, 60:447-454. M. Pietrzyk, J. Kusiak, P. Hartley, I. Pillinger (Eds.).
    • (1995) J. Mat. Proc. Techn. , vol.60 , pp. 447-454
    • Gavrus, A.1    Massoni, E.2    Chenot, J.L.3
  • 90
    • 43949156006 scopus 로고
    • The Inverse Method for Determining Viscoplastic Properties of Aluminium Alloys
    • P. Hartley, I. Pillinger, C.E.N. Sturgess, R. Hall, M. Pietrzyk, J. Kusiak (Eds.) Proc. Metal Forming'94
    • Gelin J.C., Ghouati O. The Inverse Method for Determining Viscoplastic Properties of Aluminium Alloys. J. Mat. Proc. Techn. 1994, 34:435-440. P. Hartley, I. Pillinger, C.E.N. Sturgess, R. Hall, M. Pietrzyk, J. Kusiak (Eds.).
    • (1994) J. Mat. Proc. Techn. , vol.34 , pp. 435-440
    • Gelin, J.C.1    Ghouati, O.2
  • 92
    • 84882108431 scopus 로고    scopus 로고
    • High Temperature Properties and the Crack Susceptibility of New Steel Grades for Automotive Purposes
    • Gigacher G., Pierer R., Benhard C. High Temperature Properties and the Crack Susceptibility of New Steel Grades for Automotive Purposes. WIT Trans. 2005, 51:163-168.
    • (2005) WIT Trans. , vol.51 , pp. 163-168
    • Gigacher, G.1    Pierer, R.2    Benhard, C.3
  • 93
    • 0012193246 scopus 로고
    • Definition and Evaluation of Parameters which Influence the Adhesion of Metals
    • American Society of Testing of Materials
    • Gilbreath P. Definition and Evaluation of Parameters which Influence the Adhesion of Metals. ASTM STP 431 1967, 128-148. American Society of Testing of Materials.
    • (1967) ASTM STP 431 , pp. 128-148
    • Gilbreath, P.1
  • 96
  • 97
    • 0026838721 scopus 로고
    • A Plane-Strain Model Elastoplastic Finite-Element Model for Cold Rolling of Thin Strip
    • Gratacos P., Montmitonnet P., Fromholz C., Chenot J.L. A Plane-Strain Model Elastoplastic Finite-Element Model for Cold Rolling of Thin Strip. Int. J. Mech. Sci. 1992, 34:195-210.
    • (1992) Int. J. Mech. Sci. , vol.34 , pp. 195-210
    • Gratacos, P.1    Montmitonnet, P.2    Fromholz, C.3    Chenot, J.L.4
  • 99
    • 0017151438 scopus 로고
    • A Roll Force Model for Tinplate Rolling
    • Grimble M.J. A Roll Force Model for Tinplate Rolling. GECJ of Science and Techn. 1976, 43:3-12.
    • (1976) GECJ of Science and Techn. , vol.43 , pp. 3-12
    • Grimble, M.J.1
  • 102
    • 0038620619 scopus 로고
    • Temperature and Structural Changes in Hot Rolling
    • University of Sheffield, Sheffield
    • Harding R.A. Temperature and Structural Changes in Hot Rolling. PhD Dissertation 1976, University of Sheffield, Sheffield.
    • (1976) PhD Dissertation
    • Harding, R.A.1
  • 104
    • 0037955037 scopus 로고
    • Modelling on Flow Stress of Plain Carbon Steel at Elevated Temperature
    • Hatta N., Kokado J., Kikuchi S., Takuda H. Modelling on Flow Stress of Plain Carbon Steel at Elevated Temperature. Steel Research 1985, 56:575-582.
    • (1985) Steel Research , vol.56 , pp. 575-582
    • Hatta, N.1    Kokado, J.2    Kikuchi, S.3    Takuda, H.4
  • 105
    • 0029328769 scopus 로고
    • On the Role and Mechanism of Dry Triboparticulate Lubrication
    • Heshmat H., Godet M., Berthier Y. On the Role and Mechanism of Dry Triboparticulate Lubrication. Lubr. Eng. 1995, 51:557-564.
    • (1995) Lubr. Eng. , vol.51 , pp. 557-564
    • Heshmat, H.1    Godet, M.2    Berthier, Y.3
  • 113
    • 84886248205 scopus 로고
    • A Mathematical Model to Predict the Mechanical Properties of Hot Rolled C-Mn and Microalloyed Steels
    • Hodgson P.D., Gibbs R.K. A Mathematical Model to Predict the Mechanical Properties of Hot Rolled C-Mn and Microalloyed Steels. ISIJInt. 1992, 32:1329-1338.
    • (1992) ISIJInt. , vol.32 , pp. 1329-1338
    • Hodgson, P.D.1    Gibbs, R.K.2
  • 115
    • 0002775501 scopus 로고    scopus 로고
    • The Production and Mechanical Properties of Ultrafine Ferrite
    • Hodgson P.D., Hickson M.R., Gibbs R.K. The Production and Mechanical Properties of Ultrafine Ferrite. Mat. Sci. Forum 1998, 35:63.
    • (1998) Mat. Sci. Forum , vol.35 , pp. 63
    • Hodgson, P.D.1    Hickson, M.R.2    Gibbs, R.K.3
  • 117
    • 0035519022 scopus 로고    scopus 로고
    • The Potential for Scaling ECAP: Effect of Sample Size on Grain Refinement and Mechanical Properties
    • Horita Z., Fujinami T., Langdon T.G. The Potential for Scaling ECAP: Effect of Sample Size on Grain Refinement and Mechanical Properties. Materials Science and Engineering 2001, 318:34-41.
    • (2001) Materials Science and Engineering , vol.318 , pp. 34-41
    • Horita, Z.1    Fujinami, T.2    Langdon, T.G.3
  • 119
    • 0030172692 scopus 로고    scopus 로고
    • Measurements of Friction During Hot Rolling of Aluminum Strips
    • Hum B, Colquhoun H.W., Lenard J.G. Measurements of Friction During Hot Rolling of Aluminum Strips. J. Mat. Proc. Techn. 1996, 60:331-338.
    • (1996) J. Mat. Proc. Techn. , vol.60 , pp. 331-338
    • Hum, B.1    Colquhoun, H.W.2    Lenard, J.G.3
  • 120
    • 60649112410 scopus 로고
    • Inhomogeneous Deformation During the Temper Rolling of Annealed Mild Steel
    • Hundy B.B. Inhomogeneous Deformation During the Temper Rolling of Annealed Mild Steel. J. Iron and Steel Inst. 1955, 181:313-315.
    • (1955) J. Iron and Steel Inst. , vol.181 , pp. 313-315
    • Hundy, B.B.1
  • 121
  • 122
    • 0034559515 scopus 로고    scopus 로고
    • Analytical and Experimental Study on Bonding Behaviour at the Roll Gap During Complex Rolling of Sandwich Sheets
    • Hwang Y.M., Hsu H.H., Hwang Y.L. Analytical and Experimental Study on Bonding Behaviour at the Roll Gap During Complex Rolling of Sandwich Sheets. Int. J. Mech. Sci. 2000, 42:2417-2437.
    • (2000) Int. J. Mech. Sci. , vol.42 , pp. 2417-2437
    • Hwang, Y.M.1    Hsu, H.H.2    Hwang, Y.L.3
  • 123
    • 0031647303 scopus 로고    scopus 로고
    • Phase Transformation Temperature of an Extra-Low Carbon Steel
    • Hwu Y.J., Lenard J.G. Phase Transformation Temperature of an Extra-Low Carbon Steel. ASME, J. Eng. Mat. Techn. 1998, 120:19-25.
    • (1998) ASME, J. Eng. Mat. Techn. , vol.120 , pp. 19-25
    • Hwu, Y.J.1    Lenard, J.G.2
  • 125
    • 84871398503 scopus 로고
    • The Coefficient of Friction in Cold Rolling
    • Inhaber H. The Coefficient of Friction in Cold Rolling. ASME, J. Eng. Ind. 1966, 88:421-429.
    • (1966) ASME, J. Eng. Ind. , vol.88 , pp. 421-429
    • Inhaber, H.1
  • 126
    • 0041693983 scopus 로고
    • The Influence of Rolling Variables on the Strengthening Mechanisms Operating in Niobium Steels
    • Irvine J., Baker T.N. The Influence of Rolling Variables on the Strengthening Mechanisms Operating in Niobium Steels. Mat. Sci. Eng. 1984, 64:123-134.
    • (1984) Mat. Sci. Eng. , vol.64 , pp. 123-134
    • Irvine, J.1    Baker, T.N.2
  • 128
    • 0023799104 scopus 로고
    • Effects of the Thiopenic Contamination of the Hot Rolling Lubricant in Breakdown Mill Rolling
    • Januszkiewicz K.R., Sulek H.H. Effects of the Thiopenic Contamination of the Hot Rolling Lubricant in Breakdown Mill Rolling. Lubr. Eng. 1988, 44:454-458.
    • (1988) Lubr. Eng. , vol.44 , pp. 454-458
    • Januszkiewicz, K.R.1    Sulek, H.H.2
  • 129
    • 0025748248 scopus 로고
    • A Friction Sensor for Sheet Metal Rolling
    • Jeswiet J. A Friction Sensor for Sheet Metal Rolling. Annals of the CIRP 1991, 40:231-234.
    • (1991) Annals of the CIRP , vol.40 , pp. 231-234
    • Jeswiet, J.1
  • 130
    • 84882106792 scopus 로고    scopus 로고
    • A Study of the Coefficient of Friction During Hot Rolling of a Ferritic Stainless Steel
    • Jin W., Piereder D., Lenard J.G. A Study of the Coefficient of Friction During Hot Rolling of a Ferritic Stainless Steel. Trib. Trans. 2002, 13-21.
    • (2002) Trib. Trans. , pp. 13-21
    • Jin, W.1    Piereder, D.2    Lenard, J.G.3
  • 131
    • 0014563508 scopus 로고
    • The Onset of Yield in the Cold Rolling of Thin Strip
    • Johnson K.L., Bentall R.H. The Onset of Yield in the Cold Rolling of Thin Strip. J. Mech. Phys. Solids 1969, 17:253-264.
    • (1969) J. Mech. Phys. Solids , vol.17 , pp. 253-264
    • Johnson, K.L.1    Bentall, R.H.2
  • 136
    • 0037309752 scopus 로고    scopus 로고
    • Deep Drawing of Tailored Blanks Without a Blankholder
    • Kampuš Z., Balic J. Deep Drawing of Tailored Blanks Without a Blankholder. J. Mat. Proc. Techn. 2003, 133:128-133.
    • (2003) J. Mat. Proc. Techn. , vol.133 , pp. 128-133
    • Kampuš, Z.1    Balic, J.2
  • 137
    • 6644220031 scopus 로고
    • Experimental Determination of the Strip Temperature Distribution
    • University of New Brunswick, Fredericton
    • Karagiozis A.N. Experimental Determination of the Strip Temperature Distribution. MASC. Thesis 1986, University of New Brunswick, Fredericton.
    • (1986) MASC. Thesis
    • Karagiozis, A.N.1
  • 138
    • 0006084440 scopus 로고
    • The Effect of Material Properties on the Coefficient of Friction in Cold Rolling
    • Karagiozis A.N., Lenard J.G. The Effect of Material Properties on the Coefficient of Friction in Cold Rolling. Proc. Eurotrib'95 1985, 1-7.
    • (1985) Proc. Eurotrib'95 , pp. 1-7
    • Karagiozis, A.N.1    Lenard, J.G.2
  • 139
    • 0023379218 scopus 로고
    • On Constitutive Relations for High Temperature Behaviour of Steels
    • Karagiozis A.N., Lenard J.G. On Constitutive Relations for High Temperature Behaviour of Steels. Int. J. Mech. Eng. Ed. 1987, 15:141-149.
    • (1987) Int. J. Mech. Eng. Ed. , vol.15 , pp. 141-149
    • Karagiozis, A.N.1    Lenard, J.G.2
  • 140
    • 0030083909 scopus 로고    scopus 로고
    • Numerical Results Achieved with an Inverse Computational Method for Determining the Con-stitutive Parameters using the Hot Torsion Test Results
    • Khoddam S., Lam Y.C., Thomson P.F. Numerical Results Achieved with an Inverse Computational Method for Determining the Con-stitutive Parameters using the Hot Torsion Test Results. Steel Research 1996, 67:39-43.
    • (1996) Steel Research , vol.67 , pp. 39-43
    • Khoddam, S.1    Lam, Y.C.2    Thomson, P.F.3
  • 141
    • 0024748409 scopus 로고
    • Lubricating Properties of Oil-in-Water Emulsions
    • Kimura Y., Okada K. Lubricating Properties of Oil-in-Water Emulsions. Trib. Trans. 1989, 32:524-532.
    • (1989) Trib. Trans. , vol.32 , pp. 524-532
    • Kimura, Y.1    Okada, K.2
  • 142
    • 84882177024 scopus 로고
    • Experimental Determination of the Length of the Arc of Contact in Cold Rolling
    • Kobasa D., Schultz R.A. Experimental Determination of the Length of the Arc of Contact in Cold Rolling. Iron and Steel Eng. 1968, 1-6.
    • (1968) Iron and Steel Eng. , pp. 1-6
    • Kobasa, D.1    Schultz, R.A.2
  • 143
    • 0032028356 scopus 로고    scopus 로고
    • On Metal Joining and the Prediction of the Strength of Solid-Phase Joints
    • Kolmogorov V.L., Zalazinsky A.G. On Metal Joining and the Prediction of the Strength of Solid-Phase Joints. J. Mat. Proc. Techn. 1998, 75:157-164.
    • (1998) J. Mat. Proc. Techn. , vol.75 , pp. 157-164
    • Kolmogorov, V.L.1    Zalazinsky, A.G.2
  • 144
    • 0030165188 scopus 로고    scopus 로고
    • Some Current Development Trends in Metal-Forming Technology
    • Kopp R. Some Current Development Trends in Metal-Forming Technology. J. Mat. Proc. Techn. 1996, 60:1-9.
    • (1996) J. Mat. Proc. Techn. , vol.60 , pp. 1-9
    • Kopp, R.1
  • 146
    • 33745144623 scopus 로고    scopus 로고
    • Flexibly Rolled Sheet Metal and its Use in Sheet Metal Forming
    • Kopp R., Wiedner C., Meyer A. Flexibly Rolled Sheet Metal and its Use in Sheet Metal Forming. Advanced Materials Research 2005, 6-8:81-92.
    • (2005) Advanced Materials Research , vol.6-8 , pp. 81-92
    • Kopp, R.1    Wiedner, C.2    Meyer, A.3
  • 148
    • 33745241887 scopus 로고    scopus 로고
    • The Effect of Lubricant Additives on the Coefficient of Friction in the Flat-Die Test
    • Kosanov J., Lenard J.G., Uhrig J., Wallfarth B. The Effect of Lubricant Additives on the Coefficient of Friction in the Flat-Die Test. Mat.Sci. Eng., A 2006, 427:274-281.
    • (2006) Mat.Sci. Eng., A , vol.427 , pp. 274-281
    • Kosanov, J.1    Lenard, J.G.2    Uhrig, J.3    Wallfarth, B.4
  • 149
  • 152
    • 12344337540 scopus 로고    scopus 로고
    • Influence of ECAP routes on Mechanical Properties of a Nanocrystalline Aluminium Alloy
    • Krallics G., Horváth M., Fodor Á. Influence of ECAP routes on Mechanical Properties of a Nanocrystalline Aluminium Alloy. Periodica Polytechnica Ser. Mech. Eng. 2004, 48:145-150.
    • (2004) Periodica Polytechnica Ser. Mech. Eng. , vol.48 , pp. 145-150
    • Krallics, G.1    Horváth, M.2    Fodor, A.3
  • 155
    • 0000011587 scopus 로고
    • Some Analytical and Experimental Studies of Axi-symmetric Cold Forging and Extrusion, Part I
    • Kudo H. Some Analytical and Experimental Studies of Axi-symmetric Cold Forging and Extrusion, Part I. Int. J. Mech. Sci. 1960, 2:102-127.
    • (1960) Int. J. Mech. Sci. , vol.2 , pp. 102-127
    • Kudo, H.1
  • 156
    • 0031128630 scopus 로고    scopus 로고
    • Particle Behavior in Two-Phased Lubrication
    • Kumar A., Schmid S., Wilson W.R.D. Particle Behavior in Two-Phased Lubrication. Wear 1997, 206:130-135.
    • (1997) Wear , vol.206 , pp. 130-135
    • Kumar, A.1    Schmid, S.2    Wilson, W.R.D.3
  • 157
    • 0002119870 scopus 로고
    • On Plastic Deformation of Hollow Cylinders under Axial Compressive Loading
    • (in Japanese).
    • Kunogi M. On Plastic Deformation of Hollow Cylinders under Axial Compressive Loading. J. Sci. Res. Inst. 1954, 2:63. (in Japanese).
    • (1954) J. Sci. Res. Inst. , vol.2 , pp. 63
    • Kunogi, M.1
  • 158
    • 0002391144 scopus 로고
    • Application of FE Simulation of the Compression Test to the Evaluation of Constitutive Equations for Steels at Elevated Temperatures
    • Ithaca, S.F. Shen, P.R. Dawson (Eds.)
    • Kusiak J., Pietrzyk M., Lenard J.G. Application of FE Simulation of the Compression Test to the Evaluation of Constitutive Equations for Steels at Elevated Temperatures. Proc. NUMIFORM'95 1995, 277-282. Ithaca. S.F. Shen, P.R. Dawson (Eds.).
    • (1995) Proc. NUMIFORM'95 , pp. 277-282
    • Kusiak, J.1    Pietrzyk, M.2    Lenard, J.G.3
  • 159
    • 0010538061 scopus 로고    scopus 로고
    • Modeling of the Microstructure and Mechanical Properties of Steels during Thermomechanical Processing
    • Boulder
    • Kuziak R., Cheng Y.-W., Glowacki M., Pietrzyk M. Modeling of the Microstructure and Mechanical Properties of Steels during Thermomechanical Processing. NIST Technical Note 1393 1997, Boulder.
    • (1997) NIST Technical Note 1393
    • Kuziak, R.1    Cheng, Y.-W.2    Glowacki, M.3    Pietrzyk, M.4
  • 160
    • 0025752153 scopus 로고
    • Prediction of Temperature Distribution, Flow Stress and Microstructure During the Multipass Hot Rolling of Steel Plate and Strip
    • Laasraoui A., Jonas J.J. Prediction of Temperature Distribution, Flow Stress and Microstructure During the Multipass Hot Rolling of Steel Plate and Strip. ISIJ Int. 1991, 31:93-103.
    • (1991) ISIJ Int. , vol.31 , pp. 93-103
    • Laasraoui, A.1    Jonas, J.J.2
  • 161
    • 0025926747 scopus 로고
    • Recrystallization of Austenite after Deformation at High Temperature and Strain Rates - Analysis and Modeling
    • Laasraoui A., Jonas J.J. Recrystallization of Austenite after Deformation at High Temperature and Strain Rates - Analysis and Modeling. Metall. Trans. A 1991, 22A:131-160.
    • (1991) Metall. Trans. A , vol.22 A , pp. 131-160
    • Laasraoui, A.1    Jonas, J.J.2
  • 163
    • 0038738445 scopus 로고
    • Using Laboratory Simulation to Improve Rolling Schedules
    • Union Carbide Corp., New York
    • Le Bon A.B., Saint Martin de^L.N. Using Laboratory Simulation to Improve Rolling Schedules. Microalloying'75 1976, 90-99. Union Carbide Corp., New York.
    • (1976) Microalloying'75 , pp. 90-99
    • Le Bon, A.B.1    Saint, M.D.2
  • 164
    • 0036470073 scopus 로고    scopus 로고
    • Role of Shear Strain in Ultragrain Refinement by Accumulative Roll-Bonding (ARB) Process
    • Lee S.H., Saito Y., Tsuji N., Utsunomiya H., Sakai T. Role of Shear Strain in Ultragrain Refinement by Accumulative Roll-Bonding (ARB) Process. Scripta Materialia 2002, 46:281-285.
    • (2002) Scripta Materialia , vol.46 , pp. 281-285
    • Lee, S.H.1    Saito, Y.2    Tsuji, N.3    Utsunomiya, H.4    Sakai, T.5
  • 165
    • 0037186653 scopus 로고    scopus 로고
    • Microstructures and Mechanical Properties of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding
    • Lee S.H., Saito Y., Sakai T., Utsunomiya H. Microstructures and Mechanical Properties of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding. Mat. Sci. Eng. 2002, A325:228-235.
    • (2002) Mat. Sci. Eng. , vol.A325 , pp. 228-235
    • Lee, S.H.1    Saito, Y.2    Sakai, T.3    Utsunomiya, H.4
  • 166
    • 0012267835 scopus 로고
    • An Experimental Study of Boundary Conditions in Hot and Cold Flat Rolling
    • Lenard J.G. An Experimental Study of Boundary Conditions in Hot and Cold Flat Rolling. Annals of the CIRP 1990, 39:279-282.
    • (1990) Annals of the CIRP , vol.39 , pp. 279-282
    • Lenard, J.G.1
  • 167
    • 0025846379 scopus 로고
    • Measurements of Friction in Cold Flat Rolling
    • Lenard J.G. Measurements of Friction in Cold Flat Rolling. J. Mat. Shaping Techn. 1991, 9:171-180.
    • (1991) J. Mat. Shaping Techn. , vol.9 , pp. 171-180
    • Lenard, J.G.1
  • 168
    • 0000768510 scopus 로고
    • Friction and Forward Slip in Cold Strip Rolling
    • Lenard J.G. Friction and Forward Slip in Cold Strip Rolling. Trib.Trans. 1992, 35:423-428.
    • (1992) Trib.Trans. , vol.35 , pp. 423-428
    • Lenard, J.G.1
  • 169
    • 0034498963 scopus 로고    scopus 로고
    • Tribology of Metal Rolling
    • Lenard J.G. Tribology of Metal Rolling. CIRP ANNALS 49/2 2000, 567-590.
    • (2000) CIRP ANNALS 49/2 , pp. 567-590
    • Lenard, J.G.1
  • 170
    • 84882183458 scopus 로고    scopus 로고
    • Friction During Flat Rolling of Metals
    • P. Boisse, T. Altan, K. van Luttervelt (Eds.) Friction and Flow Stress in Forming and Cutting
    • Lenard J.G. Friction During Flat Rolling of Metals. Int. J. Forming Processes 2001, 4:23-42. P. Boisse, T. Altan, K. van Luttervelt (Eds.).
    • (2001) Int. J. Forming Processes , vol.4 , pp. 23-42
    • Lenard, J.G.1
  • 171
    • 84882086335 scopus 로고    scopus 로고
    • Workability and Process Design in Rolling
    • Chapter 18 of, ASM International, G.E. Dieter, H.A. Kuhn, S.L. Semiatin (Eds.)
    • Lenard J.G. Workability and Process Design in Rolling. Handbook of Workability and Process Design 2003, 258-277. Chapter 18 of, ASM International. G.E. Dieter, H.A. Kuhn, S.L. Semiatin (Eds.).
    • (2003) Handbook of Workability and Process Design , pp. 258-277
    • Lenard, J.G.1
  • 172
    • 4344654898 scopus 로고    scopus 로고
    • The Effect of Roll Roughness on the Rolling Parameters During Cold Rolling of an Aluminum Alloy
    • Lenard J.G. The Effect of Roll Roughness on the Rolling Parameters During Cold Rolling of an Aluminum Alloy. J. Mat. Proc. Techn. 2004, 132:133-144.
    • (2004) J. Mat. Proc. Techn. , vol.132 , pp. 133-144
    • Lenard, J.G.1
  • 173
    • 0036771581 scopus 로고    scopus 로고
    • The Coefficient of Friction During Hot Rolling of Low Carbon Steel Strips
    • Lenard J.G., Barbulovic-Nad L. The Coefficient of Friction During Hot Rolling of Low Carbon Steel Strips. ASME, J. Trib. 2002, 124:840-845.
    • (2002) ASME, J. Trib. , vol.124 , pp. 840-845
    • Lenard, J.G.1    Barbulovic-Nad, L.2
  • 174
    • 0027698892 scopus 로고
    • Measurements of Friction During Warm Rolling of Aluminium
    • Lenard J.G., Malinowski Z. Measurements of Friction During Warm Rolling of Aluminium. J. Mat. Proc. Techn. 1993, 39:357-371.
    • (1993) J. Mat. Proc. Techn. , vol.39 , pp. 357-371
    • Lenard, J.G.1    Malinowski, Z.2
  • 175
    • 0001055691 scopus 로고
    • Tribology of Hot Forming: Its Effect on Grain Development
    • J.J. Jonas, T.R. Bieler, K.J. Bowman, T.M.S. Pittsburgh (Eds.)
    • Lenard J.G., Pietrzyk M. Tribology of Hot Forming: Its Effect on Grain Development. Proc. Int. Symposium "Advances in Hot Deformation Textures 1993, 107-120. J.J. Jonas, T.R. Bieler, K.J. Bowman, T.M.S. Pittsburgh (Eds.).
    • (1993) Proc. Int. Symposium quot;Advances in Hot Deformation Textures , pp. 107-120
    • Lenard, J.G.1    Pietrzyk, M.2
  • 176
    • 0031558879 scopus 로고    scopus 로고
    • A Study of Friction During Lubricated Cold Rolling of an Aluminum Alloy
    • Lenard J.G., Zhang S. A Study of Friction During Lubricated Cold Rolling of an Aluminum Alloy. J. Mat. Proc. Techn. 1997, 72:293-301.
    • (1997) J. Mat. Proc. Techn. , vol.72 , pp. 293-301
    • Lenard, J.G.1    Zhang, S.2
  • 177
    • 0023436763 scopus 로고
    • The Role of Constitutive Formulation in the Analysis of Hot Rolling
    • Lenard J.G., Wang F., Nadkarni G. The Role of Constitutive Formulation in the Analysis of Hot Rolling. ASME, J. Eng. Mat. Techn. 1987, 109:343-349.
    • (1987) ASME, J. Eng. Mat. Techn. , vol.109 , pp. 343-349
    • Lenard, J.G.1    Wang, F.2    Nadkarni, G.3
  • 179
    • 0013026332 scopus 로고    scopus 로고
    • Forward Slip Measurements in Cold Rolling by Laser Doppler Velocimetry: Uncertainty Analysis and Accuracy Improvement
    • Li E.B., Tieu A.K., Yuen W.Y.D. Forward Slip Measurements in Cold Rolling by Laser Doppler Velocimetry: Uncertainty Analysis and Accuracy Improvement. J. Mat. Proc. Techn. 2003, 133:348-352.
    • (2003) J. Mat. Proc. Techn. , vol.133 , pp. 348-352
    • Li, E.B.1    Tieu, A.K.2    Yuen, W.Y.D.3
  • 180
    • 0020091282 scopus 로고
    • Rigid-Plastic Finite-Element Analysis of Plane Strain Rolling
    • Li G., Kobayashi S. Rigid-Plastic Finite-Element Analysis of Plane Strain Rolling. ASME, J. Eng. Ind. 1982, 104:33-64.
    • (1982) ASME, J. Eng. Ind. , vol.104 , pp. 33-64
    • Li, G.1    Kobayashi, S.2
  • 181
    • 0342390641 scopus 로고    scopus 로고
    • Analytical Equations for On-line Modelling of Friction in Cold Rolling
    • IOM Communications, London, J.T. Beynon, M.T. Clark, P. Ingham, P. Kern, K. Waterson (Eds.)
    • Li G-Y. Analytical Equations for On-line Modelling of Friction in Cold Rolling. Proceedings of the Conference Modelling of Metal Rolling Processes 3 1999, 370-379. IOM Communications, London. J.T. Beynon, M.T. Clark, P. Ingham, P. Kern, K. Waterson (Eds.).
    • (1999) Proceedings of the Conference Modelling of Metal Rolling Processes 3 , pp. 370-379
    • Li, G.-Y.1
  • 182
    • 85197781063 scopus 로고    scopus 로고
    • Evaluation of Interfacial Heat Transfer and Friction Conditions and Their Effects on Hot Forming Processes
    • Li Y.H., Sellars C.M. Evaluation of Interfacial Heat Transfer and Friction Conditions and Their Effects on Hot Forming Processes. Proc. 37th MWSP Conf. 1996, 385-394.
    • (1996) Proc. 37th MWSP Conf. , pp. 385-394
    • Li, Y.H.1    Sellars, C.M.2
  • 183
    • 0000013993 scopus 로고    scopus 로고
    • Comparative Investigations of Interfacial Heat Transfer Behaviour During Hot Forging and Rolling of Steel with Oxide Scale Formation
    • Li Y.H., Sellars C.M. Comparative Investigations of Interfacial Heat Transfer Behaviour During Hot Forging and Rolling of Steel with Oxide Scale Formation. Proc. 7th Int. Metal Forming 98 1998, 282-286.
    • (1998) Proc. 7th Int. Metal Forming 98 , pp. 282-286
    • Li, Y.H.1    Sellars, C.M.2
  • 185
    • 0021407471 scopus 로고
    • Study of Friction in Cold Strip Rolling
    • Lim L.S., Lenard J.G. Study of Friction in Cold Strip Rolling. ASME J. Eng. Mat. Techn. 1984, 106:139-146.
    • (1984) ASME J. Eng. Mat. Techn. , vol.106 , pp. 139-146
    • Lim, L.S.1    Lenard, J.G.2
  • 186
    • 0026416902 scopus 로고
    • Evaluation of Lubricants in Cold Strip Rolling
    • Lin J.F., Huang T.K., Hsu C.T. Evaluation of Lubricants in Cold Strip Rolling. Wear 1991, 147:79-91.
    • (1991) Wear , vol.147 , pp. 79-91
    • Lin, J.F.1    Huang, T.K.2    Hsu, C.T.3
  • 187
    • 0035255993 scopus 로고    scopus 로고
    • Application of the Preliminary Displacement Principle to the Temper Rolling Model
    • Liu Y., Lee W-H. Application of the Preliminary Displacement Principle to the Temper Rolling Model. KSME International Journal 2001, 15:225-231.
    • (2001) KSME International Journal , vol.15 , pp. 225-231
    • Liu, Y.1    Lee, W.-H.2
  • 188
    • 0034744404 scopus 로고    scopus 로고
    • Determining the Pressure Dependence of Lubricant Viscosity by Roughness Measurements of Rolled Strip
    • Lo S-W, Yang T-S. Determining the Pressure Dependence of Lubricant Viscosity by Roughness Measurements of Rolled Strip. Trib.Trans. 2001, 44:118-124.
    • (2001) Trib.Trans. , vol.44 , pp. 118-124
    • Lo, S.-W.1    Yang, T.-S.2
  • 189
    • 0019608790 scopus 로고
    • The Influence of Scale on Friction in Hot Metalworking
    • Loung L.H.S., Heijkoop T. The Influence of Scale on Friction in Hot Metalworking. Wear 1981, 71:93-102.
    • (1981) Wear , vol.71 , pp. 93-102
    • Loung, L.H.S.1    Heijkoop, T.2
  • 192
    • 0027719352 scopus 로고
    • Roll Force, Torque, Lever Arm Coefficient and Strain Distribution in Edge Rolling
    • Lundberg S-E., Gustaffson T. Roll Force, Torque, Lever Arm Coefficient and Strain Distribution in Edge Rolling. J. Mat. Eng. Performance 1993, 26:873-879.
    • (1993) J. Mat. Eng. Performance , vol.26 , pp. 873-879
    • Lundberg, S.-E.1    Gustaffson, T.2
  • 193
    • 0037174214 scopus 로고    scopus 로고
    • Cold Roll Bonding of 5754-Aluminum Strips
    • Madaah-Hosseini H.R., Kokabi A.H. Cold Roll Bonding of 5754-Aluminum Strips. Mat. Sci. Eng. 2002, A335:186-190.
    • (2002) Mat. Sci. Eng. , vol.A335 , pp. 186-190
    • Madaah-Hosseini, H.R.1    Kokabi, A.H.2
  • 194
    • 0030123475 scopus 로고    scopus 로고
    • A Study of the Effect of Thermomechanical History on the Mechanical Properties of a High Niobium Steel
    • Majta J., Lenard J.G., Pietrzyk M. A Study of the Effect of Thermomechanical History on the Mechanical Properties of a High Niobium Steel. Mat. Sci. Eng. 1996, A208:249-259.
    • (1996) Mat. Sci. Eng. , vol.A208 , pp. 249-259
    • Majta, J.1    Lenard, J.G.2    Pietrzyk, M.3
  • 195
    • 84977885573 scopus 로고
    • Fractal Model of Elastic-Plastic Contact between Rough Surfaces
    • Majumdar A., Bhushan B. Fractal Model of Elastic-Plastic Contact between Rough Surfaces. ASME, J. Trib. 1991, 113:1-11.
    • (1991) ASME, J. Trib. , vol.113 , pp. 1-11
    • Majumdar, A.1    Bhushan, B.2
  • 196
  • 197
    • 0002125566 scopus 로고
    • A Method for Determination of the Coefficient of Friction of Metals Under Conditions of Bulk Plastic Deformation
    • Male A.T., Cockroft M.G. A Method for Determination of the Coefficient of Friction of Metals Under Conditions of Bulk Plastic Deformation. J. Inst. Met. 1964, 93:38-46.
    • (1964) J. Inst. Met. , vol.93 , pp. 38-46
    • Male, A.T.1    Cockroft, M.G.2
  • 198
    • 0014813456 scopus 로고
    • The Validity of Mathematical Solutions for Determining Friction from the Ring Compression Test
    • Male A.T., DePierre V. The Validity of Mathematical Solutions for Determining Friction from the Ring Compression Test. ASME, J. Lubr. Techn. 1970, 92:389-397.
    • (1970) ASME, J. Lubr. Techn. , vol.92 , pp. 389-397
    • Male, A.T.1    DePierre, V.2
  • 200
    • 0027700684 scopus 로고
    • Analysis of the Flat Rolling Process: One-Dimensional and Finite Element Models
    • Malinowski Z., Pietrzyk M., Lenard J.G. Analysis of the Flat Rolling Process: One-Dimensional and Finite Element Models. J Mat. Proc. Techn. 1993, 39:373-387.
    • (1993) J Mat. Proc. Techn. , vol.39 , pp. 373-387
    • Malinowski, Z.1    Pietrzyk, M.2    Lenard, J.G.3
  • 201
    • 12344282909 scopus 로고    scopus 로고
    • An Investigation of Deformation Behavior and Bonding Strength of Bimetal Strip During Rolling
    • Manesh D.H., Taheri A.K. An Investigation of Deformation Behavior and Bonding Strength of Bimetal Strip During Rolling. Mechanics of Materials 2005, 37:531-542.
    • (2005) Mechanics of Materials , vol.37 , pp. 531-542
    • Manesh, D.H.1    Taheri, A.K.2
  • 203
    • 0033881529 scopus 로고    scopus 로고
    • Friction in Cold Rolling of a Low Carbon Steel with Lubricants
    • McConnell C., Lenard J.G. Friction in Cold Rolling of a Low Carbon Steel with Lubricants. J. Mat. Proc. Techn. 2000, 99:86-93.
    • (2000) J. Mat. Proc. Techn. , vol.99 , pp. 86-93
    • McConnell, C.1    Lenard, J.G.2
  • 205
    • 0037047934 scopus 로고    scopus 로고
    • New Materials and Production Technologies for Innovative Lightweight Construction
    • Merklein M., Geiger M. New Materials and Production Technologies for Innovative Lightweight Construction. J. Mat. Proc. Techn. 2002, 125-126:532-536.
    • (2002) J. Mat. Proc. Techn. , vol.125-126 , pp. 532-536
    • Merklein, M.1    Geiger, M.2
  • 206
    • 84960595485 scopus 로고
    • Some Elementary Distribution of Stress in Three Dimensions
    • Michell J.H. Some Elementary Distribution of Stress in Three Dimensions. Proc. London Math. Soc. 1900, 32:23-35.
    • (1900) Proc. London Math. Soc. , vol.32 , pp. 23-35
    • Michell, J.H.1
  • 208
    • 0033747817 scopus 로고    scopus 로고
    • A Study on Resistance Welding in Steel Sheets for Tailor-Welded Blank; Evolution of Flash Weldability and Formability (2nd Report)
    • Min K.B., Kang S.S. A Study on Resistance Welding in Steel Sheets for Tailor-Welded Blank; Evolution of Flash Weldability and Formability (2nd Report). J. Mat. Proc. Techn. 2000, 103:218-224.
    • (2000) J. Mat. Proc. Techn. , vol.103 , pp. 218-224
    • Min, K.B.1    Kang, S.S.2
  • 209
    • 0034287559 scopus 로고    scopus 로고
    • Transfer Layer and Friction in Cold Metal Strip Rolling Processes
    • Montmitonnet P., Delamare F., Rizouliers B. Transfer Layer and Friction in Cold Metal Strip Rolling Processes. Wear 2000, 245:125-135.
    • (2000) Wear , vol.245 , pp. 125-135
    • Montmitonnet, P.1    Delamare, F.2    Rizouliers, B.3
  • 210
    • 0027803595 scopus 로고
    • The Influence of Precipitation Mode and Dislocation Substructure on the Properties of Vanadium-Treated Steels
    • Morrison W.B., Cochrane R.C., Mitchell P.S. The Influence of Precipitation Mode and Dislocation Substructure on the Properties of Vanadium-Treated Steels. ISIJ Int. 1993, 33:1095-1107.
    • (1993) ISIJ Int. , vol.33 , pp. 1095-1107
    • Morrison, W.B.1    Cochrane, R.C.2    Mitchell, P.S.3
  • 211
    • 0031995855 scopus 로고    scopus 로고
    • Constitutive Model of Adhesive and Ploughing Friction in Metal-Forming Processes
    • Mubea.com.
    • Mróz Z., Stupkiewicz S. Constitutive Model of Adhesive and Ploughing Friction in Metal-Forming Processes. Int. J. Mech. Sci. 1998, 40:281-303. Mubea.com.
    • (1998) Int. J. Mech. Sci. , vol.40 , pp. 281-303
    • Mróz, Z.1    Stupkiewicz, S.2
  • 212
    • 0003489274 scopus 로고    scopus 로고
    • The Effect of Material and Process Parameters on the Frictional Conditions in Hot Flat Rolling of Steels
    • University Waterloo, Waterloo, Canada
    • Munther P.A. The Effect of Material and Process Parameters on the Frictional Conditions in Hot Flat Rolling of Steels. PhD Thesis 1997, University Waterloo, Waterloo, Canada.
    • (1997) PhD Thesis
    • Munther, P.A.1
  • 213
    • 0032663857 scopus 로고    scopus 로고
    • The Effect of Scaling on Interfacial Friction in Hot Rolling of Steels
    • Munther P.A., Lenard J.G. The Effect of Scaling on Interfacial Friction in Hot Rolling of Steels. J. Mat. Proc. Techn. 1999, 105-113.
    • (1999) J. Mat. Proc. Techn. , pp. 105-113
    • Munther, P.A.1    Lenard, J.G.2
  • 214
    • 0019912497 scopus 로고
    • Statistical Evaluation of Some Hot Rolling Theories
    • Murthy A., Lenard J.G. Statistical Evaluation of Some Hot Rolling Theories. ASME, J. Eng. Mat. Techn. 1982, 104:47-52.
    • (1982) ASME, J. Eng. Mat. Techn. , vol.104 , pp. 47-52
    • Murthy, A.1    Lenard, J.G.2
  • 215
    • 4244201943 scopus 로고
    • The Forces Required for Rolling Steel Strip Under Tension
    • Nadai A. The Forces Required for Rolling Steel Strip Under Tension. ASME 1939, A54-A62.
    • (1939) ASME
    • Nadai, A.1
  • 216
    • 0023994473 scopus 로고
    • Observations of Liquid Droplet Behaviour and Oil Film Formation in O/W Type Emulsion Lubrication
    • Nakahara T., Makino T., Kyogoku K. Observations of Liquid Droplet Behaviour and Oil Film Formation in O/W Type Emulsion Lubrication. ASME, J. Trib. 1988, 110:348-353.
    • (1988) ASME, J. Trib. , vol.110 , pp. 348-353
    • Nakahara, T.1    Makino, T.2    Kyogoku, K.3
  • 217
    • 0026491322 scopus 로고
    • Prediction of Microstructure Distribution in the Through-Thickness Direction During and after Hot Rolling in Carbon Steels
    • Nanba S., Kitamura M., Shimada M., Katsumata M., Inoue T., Imamura H., Maeanda Y., Hattori S. Prediction of Microstructure Distribution in the Through-Thickness Direction During and after Hot Rolling in Carbon Steels. ISIJ Int. 1992, 377-386.
    • (1992) ISIJ Int. , pp. 377-386
    • Nanba, S.1    Kitamura, M.2    Shimada, M.3    Katsumata, M.4    Inoue, T.5    Imamura, H.6    Maeanda, Y.7    Hattori, S.8
  • 220
    • 17644434828 scopus 로고
    • The Contact of Surfaces Having a Random Structure
    • Onions R.A., Archard J.F. The Contact of Surfaces Having a Random Structure. J. Phys. D 1973, 6:289-304.
    • (1973) J. Phys. D , vol.6 , pp. 289-304
    • Onions, R.A.1    Archard, J.F.2
  • 221
    • 0001289142 scopus 로고
    • The Calculation of Roll Pressure in Hot and Cold Flat Rolling
    • Orowan E. The Calculation of Roll Pressure in Hot and Cold Flat Rolling. Proc. I. Mech. E. 1943, 150:140-167.
    • (1943) Proc. I. Mech. E. , vol.150 , pp. 140-167
    • Orowan, E.1
  • 222
    • 0035888164 scopus 로고    scopus 로고
    • Microstructural Characteristics and Thermal Stability of Ultrafine Grained 6061 Al Alloy Fabricated by Accumulative Roll Bonding Process
    • Park K-T., Kwon H-J., Kim W-J., Kim Y-S. Microstructural Characteristics and Thermal Stability of Ultrafine Grained 6061 Al Alloy Fabricated by Accumulative Roll Bonding Process. Mat. Sci. Eng. 2001, A316:145-152.
    • (2001) Mat. Sci. Eng. , vol.A316 , pp. 145-152
    • Park, K.-T.1    Kwon, H.-J.2    Kim, W.-J.3    Kim, Y.-S.4
  • 224
    • 0023602770 scopus 로고
    • Optimal Algorithms for Adaptive Networks: Second Order Back Propagation, Second Order Direct Propagation, and Second Order Hebbin Learning
    • Parker D.B. Optimal Algorithms for Adaptive Networks: Second Order Back Propagation, Second Order Direct Propagation, and Second Order Hebbin Learning. Proceedings of the IEEE Int. Conf. on Neural Net-works 1987, 2:593-600.
    • (1987) Proceedings of the IEEE Int. Conf. on Neural Net-works , vol.2 , pp. 593-600
    • Parker, D.B.1
  • 225
    • 0021645409 scopus 로고
    • Adhesion and Micromechanical Properties of Metal Surfaces
    • Pashley M.D., Pethica J.B., Tabor D. Adhesion and Micromechanical Properties of Metal Surfaces. Wear 1984, 100:7-31.
    • (1984) Wear , vol.100 , pp. 7-31
    • Pashley, M.D.1    Pethica, J.B.2    Tabor, D.3
  • 226
    • 84882110471 scopus 로고    scopus 로고
    • Modelling of Temper Rolling Considering Surface Change of Strip
    • A.A. Balkema, Rotterdam, M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, I. Pillinger (Eds.)
    • Pawelski H. Modelling of Temper Rolling Considering Surface Change of Strip. Metal Forming 2000 2000, 285-301. A.A. Balkema, Rotterdam. M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, I. Pillinger (Eds.).
    • (2000) Metal Forming 2000 , pp. 285-301
    • Pawelski, H.1
  • 227
    • 0032636524 scopus 로고    scopus 로고
    • Effect of Rolling Temperature on Interface and Bond Development of Roll Bonded Copper/Aluminium Laminates
    • Peng X.K., Heness G., Yeung W.Y. Effect of Rolling Temperature on Interface and Bond Development of Roll Bonded Copper/Aluminium Laminates. J. Mat. Sci. 1999, 34:277-281.
    • (1999) J. Mat. Sci. , vol.34 , pp. 277-281
    • Peng, X.K.1    Heness, G.2    Yeung, W.Y.3
  • 228
    • 0020204991 scopus 로고
    • Analiza Metodl Elemento acute;w Skolczonych Procesu Walcowania Blach i Tasm
    • (in Polish).
    • Pietrzyk M. Analiza Metodl Elementów Skolczonych Procesu Walcowania Blach i Tasm. Hutnik 1982, 49:213-217. (in Polish).
    • (1982) Hutnik , vol.49 , pp. 213-217
    • Pietrzyk, M.1
  • 229
    • 0001056764 scopus 로고
    • Numerical Aspects of the Simulation of Hot Metal Forming Using Internal Variable Method
    • Pietrzyk M. Numerical Aspects of the Simulation of Hot Metal Forming Using Internal Variable Method. Metall. Foundry Eng. 1994, 20:429-439.
    • (1994) Metall. Foundry Eng. , vol.20 , pp. 429-439
    • Pietrzyk, M.1
  • 230
    • 0034964060 scopus 로고    scopus 로고
    • Identification of Parameters in the History Dependent Constitutive Model for Steels
    • Pietrzyk M. Identification of Parameters in the History Dependent Constitutive Model for Steels. Annals of the CIRP 2001, 50:161-164.
    • (2001) Annals of the CIRP , vol.50 , pp. 161-164
    • Pietrzyk, M.1
  • 231
    • 0024136566 scopus 로고
    • Experimental Substantiation of Modelling Heat Transfer in Hot Flat Rolling
    • H.R. Jacobs (Ed.) Proc. 25th Nat. Heat Transfer Conf.
    • Pietrzyk M., Lenard J.G. Experimental Substantiation of Modelling Heat Transfer in Hot Flat Rolling. HTD-96 1988, 3:47-53. H.R. Jacobs (Ed.).
    • (1988) HTD-96 , vol.3 , pp. 47-53
    • Pietrzyk, M.1    Lenard, J.G.2
  • 232
    • 0003722012 scopus 로고
    • Thermal-Mechanical Modelling of the Flat Rolling
    • Springer-Verlag, Berlin
    • Pietrzyk M., Lenard J.G. Thermal-Mechanical Modelling of the Flat Rolling. Process 1991, Springer-Verlag, Berlin.
    • (1991) Process
    • Pietrzyk, M.1    Lenard, J.G.2
  • 233
    • 0343444708 scopus 로고
    • Application of the Finite Element Technique to the Interpretation of the Plane Strain Compression Test for Aluminum
    • Pineridge Press, Barcelona, D.R.J. Owen, E. Onate, E. Hinton (Eds.)
    • Pietrzyk M., Tibbals J.E. Application of the Finite Element Technique to the Interpretation of the Plane Strain Compression Test for Aluminum. Proc. COMPLAS 4 1995, 889-900. Pineridge Press, Barcelona. D.R.J. Owen, E. Onate, E. Hinton (Eds.).
    • (1995) Proc. COMPLAS 4 , pp. 889-900
    • Pietrzyk, M.1    Tibbals, J.E.2
  • 235
    • 0003017817 scopus 로고
    • Heat Exchange between the Workpiece and the Tool in Metal Forming Processes
    • Ostrava, J. Bartecek (Ed.)
    • Pietrzyk M., Kusiak H., Lenard J.G., Malinowski Z. Heat Exchange between the Workpiece and the Tool in Metal Forming Processes. Conf. FORMABILITY'94 1994, 329-338. Ostrava. J. Bartecek (Ed.).
    • (1994) Conf. FORMABILITY'94 , pp. 329-338
    • Pietrzyk, M.1    Kusiak, H.2    Lenard, J.G.3    Malinowski, Z.4
  • 237
    • 0035298046 scopus 로고    scopus 로고
    • Modeling Cold-Rolling Processes of Commercial Twin Roll Cast Aluminum Alloys
    • Puchi-Cabrera E.S. Modeling Cold-Rolling Processes of Commercial Twin Roll Cast Aluminum Alloys. ASME, J. Eng. Mat. Techn. 2001, 123:149-154.
    • (2001) ASME, J. Eng. Mat. Techn. , vol.123 , pp. 149-154
    • Puchi-Cabrera, E.S.1
  • 240
    • 0000964913 scopus 로고
    • New Method of Homogeneous Compression of Specimens for the Determination of Flow Stress and the Coefficient of Internal Friction
    • (in Russian).
    • Rastegaev M.V. New Method of Homogeneous Compression of Specimens for the Determination of Flow Stress and the Coefficient of Internal Friction. Zavod Lab 1940, 354. (in Russian).
    • (1940) Zavod Lab , pp. 354
    • Rastegaev, M.V.1
  • 241
    • 0035297649 scopus 로고    scopus 로고
    • The Effects of Lubricant Starvation in the Cold Rolling of Aluminum Metal Using an Oil-in-Water Emulsion
    • Reich R., Panseri N., Bohaychick J. The Effects of Lubricant Starvation in the Cold Rolling of Aluminum Metal Using an Oil-in-Water Emulsion. Lubr. Eng. 2001, 57:15-18.
    • (2001) Lubr. Eng. , vol.57 , pp. 15-18
    • Reich, R.1    Panseri, N.2    Bohaychick, J.3
  • 243
    • 0013728016 scopus 로고
    • Full Fluid Film Lubrication in Aluminum Strip Rolling
    • Reid J.V., Schey J.A. Full Fluid Film Lubrication in Aluminum Strip Rolling. ASLE Trans. 1977, 21:191-200.
    • (1977) ASLE Trans. , vol.21 , pp. 191-200
    • Reid, J.V.1    Schey, J.A.2
  • 246
    • 0037649576 scopus 로고
    • Computing the Coefficient of Friction in the Roll Bite from Mill Data
    • Roberts W.L. Computing the Coefficient of Friction in the Roll Bite from Mill Data. Blast Furnace and Steel Plant 1967, 55:499-508.
    • (1967) Blast Furnace and Steel Plant , vol.55 , pp. 499-508
    • Roberts, W.L.1
  • 247
    • 6644229052 scopus 로고    scopus 로고
    • Mechanical Principles of Rolling
    • Roberts C.D. Mechanical Principles of Rolling. Iron and Steelmaker 1997, 24:113-114.
    • (1997) Iron and Steelmaker , vol.24 , pp. 113-114
    • Roberts, C.D.1
  • 248
    • 0017555226 scopus 로고
    • Tribological Considerations in the Hot-Rolling of Low-Carbon Steels
    • Roberts W.L. Tribological Considerations in the Hot-Rolling of Low-Carbon Steels. Lubr. Eng. 1977, 575-580.
    • (1977) Lubr. Eng. , pp. 575-580
    • Roberts, W.L.1
  • 256
    • 0028461415 scopus 로고
    • Full Film Lubrication of Strip Rolling
    • Sa C-Y., Wilson W.R.D. Full Film Lubrication of Strip Rolling. ASME, J. Trib. 1994, 116:569-576.
    • (1994) ASME, J. Trib. , vol.116 , pp. 569-576
    • Sa, C.-Y.1    Wilson, W.R.D.2
  • 258
    • 0032487150 scopus 로고    scopus 로고
    • Ultra-fine Grained Bulk Alumium Produced by Accumulative Roll-Bonding Process
    • Saito Y., Tsuji N., Utsunomiya H., Sakai T., Hong R.G. Ultra-fine Grained Bulk Alumium Produced by Accumulative Roll-Bonding Process. Scripta Materialia 1998, 39:1221-1227.
    • (1998) Scripta Materialia , vol.39 , pp. 1221-1227
    • Saito, Y.1    Tsuji, N.2    Utsunomiya, H.3    Sakai, T.4    Hong, R.G.5
  • 259
    • 0032760650 scopus 로고    scopus 로고
    • Novel Ultra-High Straining Process for Bulk Materials - Development of the Accumulative Roll-Bonding (ARB) Process
    • Saito Y., Utsunomiya H., Tsuji N., Sakai T. Novel Ultra-High Straining Process for Bulk Materials - Development of the Accumulative Roll-Bonding (ARB) Process. Acta Materialia 1999, 47:579-583.
    • (1999) Acta Materialia , vol.47 , pp. 579-583
    • Saito, Y.1    Utsunomiya, H.2    Tsuji, N.3    Sakai, T.4
  • 260
    • 0029359763 scopus 로고
    • Dynamic Recrystallization Microstructures under Hot Working Conditions
    • Sakai T. Dynamic Recrystallization Microstructures under Hot Working Conditions. J. Mat. Proc. Techn. 1995, 33:349-361.
    • (1995) J. Mat. Proc. Techn. , vol.33 , pp. 349-361
    • Sakai, T.1
  • 262
    • 0020642378 scopus 로고
    • Pressure-Viscosity Coefficients of Liquid Lubricants
    • Sargent L.B. Pressure-Viscosity Coefficients of Liquid Lubricants. ASLE Transactions 1983, 26:1-10.
    • (1983) ASLE Transactions , vol.26 , pp. 1-10
    • Sargent, L.B.1
  • 264
    • 70349194258 scopus 로고
    • Workability in Rolling
    • ASM, G.E. Dieter (Ed.)
    • Schey J.A. Workability in Rolling. Workability Testing Techniques 1984, 269-314. ASM. G.E. Dieter (Ed.).
    • (1984) Workability Testing Techniques , pp. 269-314
    • Schey, J.A.1
  • 266
    • 0030788032 scopus 로고    scopus 로고
    • Hydrodynamic Segregation, Entrainment and Rejection of Oil in Emulsion Lubrication Problems
    • Schmid S.R. Hydrodynamic Segregation, Entrainment and Rejection of Oil in Emulsion Lubrication Problems. ASME, J. Trib. 1997, 119:342-348.
    • (1997) ASME, J. Trib. , vol.119 , pp. 342-348
    • Schmid, S.R.1
  • 267
    • 0029102610 scopus 로고
    • Lubrication of Aluminum Rolling by Oil-in-Water Emulsion
    • Schmid S.R., Wilson W.R.D. Lubrication of Aluminum Rolling by Oil-in-Water Emulsion. Trib. Trans. 1995, 38:452-458.
    • (1995) Trib. Trans. , vol.38 , pp. 452-458
    • Schmid, S.R.1    Wilson, W.R.D.2
  • 268
    • 0030072145 scopus 로고    scopus 로고
    • Lubrication Mechanisms for Oil-in-Water Emulsions
    • Schmid S.R., Wilson W.R.D. Lubrication Mechanisms for Oil-in-Water Emulsions. Lubr. Eng. 1996, 52:168-175.
    • (1996) Lubr. Eng. , vol.52 , pp. 168-175
    • Schmid, S.R.1    Wilson, W.R.D.2
  • 269
    • 0024061903 scopus 로고
    • Effects of Oxygen in Influencing Friction Characteristics of Metals
    • Schunke J.N., Sudarshan T.S., Srivatsan T.S. Effects of Oxygen in Influencing Friction Characteristics of Metals. Wear 1988, 128:211-221.
    • (1988) Wear , vol.128 , pp. 211-221
    • Schunke, J.N.1    Sudarshan, T.S.2    Srivatsan, T.S.3
  • 272
    • 0002311228 scopus 로고
    • Physical Metallurgy of Hot Working
    • The Metals Soc., London, C.M. Sellars, G.J. Davies (Eds.)
    • Sellars C.M. Physical Metallurgy of Hot Working. Hot Working and Forming Processes 1979, 3-15. The Metals Soc., London. C.M. Sellars, G.J. Davies (Eds.).
    • (1979) Hot Working and Forming Processes , pp. 3-15
    • Sellars, C.M.1
  • 273
    • 84935612807 scopus 로고
    • Modelling Microstructural Development During Hot Rolling
    • Sellars C.M. Modelling Microstructural Development During Hot Rolling. Mat. Sci. Techn. 1990, 6:1072-1081.
    • (1990) Mat. Sci. Techn. , vol.6 , pp. 1072-1081
    • Sellars, C.M.1
  • 274
    • 0022299269 scopus 로고
    • University of Wollongong, Wollongong, NSW, D.P. Dunne, T. Chandra (Eds.)
    • Sellars C.M., Beynon J.H. High Strength Low Alloy Steels 1984, 142-150. University of Wollongong, Wollongong, NSW. D.P. Dunne, T. Chandra (Eds.).
    • (1984) High Strength Low Alloy Steels , pp. 142-150
    • Sellars, C.M.1    Beynon, J.H.2
  • 275
    • 0015600494 scopus 로고
    • Prediction of Plate Cooling During Rolling Mill Operation
    • Seredynski T. Prediction of Plate Cooling During Rolling Mill Operation. J. Iron and Steel Inst. 1973, 211:197-203.
    • (1973) J. Iron and Steel Inst. , vol.211 , pp. 197-203
    • Seredynski, T.1
  • 276
    • 0000093982 scopus 로고
    • Microstructure and Mechanical Properties of Metal/Oxide and Metal/Silicide Interfaces
    • Shaw L., Miracle D., Abbaschian R. Microstructure and Mechanical Properties of Metal/Oxide and Metal/Silicide Interfaces. Acta Metall. Mater 1995, 43:4267-4279.
    • (1995) Acta Metall. Mater , vol.43 , pp. 4267-4279
    • Shaw, L.1    Miracle, D.2    Abbaschian, R.3
  • 277
    • 0036851749 scopus 로고    scopus 로고
    • A New Spread Formula for Hot Flat Rolling of Aluminium Alloys
    • Sheppard T., Duan X. A New Spread Formula for Hot Flat Rolling of Aluminium Alloys. Mod. Sim. Mat. Sci. Eng 2002, 10(6):597-610.
    • (2002) Mod. Sim. Mat. Sci. Eng , vol.10 , Issue.6 , pp. 597-610
    • Sheppard, T.1    Duan, X.2
  • 278
    • 0000212450 scopus 로고
    • Empirical Formula of Flow-Stress of Carbon Steels - Resistance to Deformation of Carbon Steels at Elevated Temperatures
    • Shida S. Empirical Formula of Flow-Stress of Carbon Steels - Resistance to Deformation of Carbon Steels at Elevated Temperatures. J. Jpn. Soc. Techn. Plasticity 1969, 10:610-617.
    • (1969) J. Jpn. Soc. Techn. Plasticity , vol.10 , pp. 610-617
    • Shida, S.1
  • 280
    • 0034217048 scopus 로고    scopus 로고
    • Emulsions Versus Neat Oils in the Cold Rolling of Carbon Steel Strips
    • Shirizly A., Lenard J.G. Emulsions Versus Neat Oils in the Cold Rolling of Carbon Steel Strips. ASME J. Trib. 2000, 122:550-556.
    • (2000) ASME J. Trib. , vol.122 , pp. 550-556
    • Shirizly, A.1    Lenard, J.G.2
  • 282
    • 0007612416 scopus 로고
    • Investigation into the Distribution of Pressure at the Surface of the Material in Contact with the Rolls
    • Siebel E., Lueg W. Investigation into the Distribution of Pressure at the Surface of the Material in Contact with the Rolls. Mitt. K.W. Inst. Eisenf. 1933, 13:1-14.
    • (1933) Mitt. K.W. Inst. Eisenf. , vol.13 , pp. 1-14
    • Siebel, E.1    Lueg, W.2
  • 283
    • 6644220028 scopus 로고    scopus 로고
    • Development of a Portable Sensor for the Three-Dimensional Measurement of Sheet and Tool Surfaces
    • Siegert K., Wagner S., Dogan N. Development of a Portable Sensor for the Three-Dimensional Measurement of Sheet and Tool Surfaces. Proc. Advances in Sheet Metal Stamping (SP-1435) 1999, 1-10.
    • (1999) Proc. Advances in Sheet Metal Stamping (SP-1435) , pp. 1-10
    • Siegert, K.1    Wagner, S.2    Dogan, N.3
  • 285
    • 0023211843 scopus 로고
    • A Finite Element Study of Plane Strain Hot Rolling
    • Silvonen A., Malinen A., Korhonen A.S. A Finite Element Study of Plane Strain Hot Rolling. Scand. J. Metal. 1987, 16:103-108.
    • (1987) Scand. J. Metal. , vol.16 , pp. 103-108
    • Silvonen, A.1    Malinen, A.2    Korhonen, A.S.3
  • 287
    • 84871396055 scopus 로고
    • The Forward Slip in Cold Strip Rolling
    • Sims R.B. The Forward Slip in Cold Strip Rolling. Sheet Metal Industries 1952, 29:869-877.
    • (1952) Sheet Metal Industries , vol.29 , pp. 869-877
    • Sims, R.B.1
  • 288
    • 0000346451 scopus 로고
    • The Calculation of Roll Force and Torque in Hot Rolling Mills
    • Sims R.B. The Calculation of Roll Force and Torque in Hot Rolling Mills. Proc. I. Mech. E. 1954, 168:191-200.
    • (1954) Proc. I. Mech. E. , vol.168 , pp. 191-200
    • Sims, R.B.1
  • 289
    • 0346735093 scopus 로고
    • Speed Dependent Variables in Cold Rolling
    • Sims R.B., Arthur D.F. Speed Dependent Variables in Cold Rolling. JISI, B.I.S.R.A. 1952, 285-295.
    • (1952) JISI, B.I.S.R.A. , pp. 285-295
    • Sims, R.B.1    Arthur, D.F.2
  • 290
    • 0019071021 scopus 로고
    • Viscosity-Pressure Correlation of Liquids
    • So B.Y.C., Klaus E.E. Viscosity-Pressure Correlation of Liquids. ASLE Transactions 1980, 23:409-421.
    • (1980) ASLE Transactions , vol.23 , pp. 409-421
    • So, B.Y.C.1    Klaus, E.E.2
  • 292
    • 6644226778 scopus 로고
    • A New Method for Investigating the Relation Between Real Contact Area and Friction in Bulk Metal Forming Processes
    • Stancu-Niederkorn S., Engel U., Geiger M. A New Method for Investigating the Relation Between Real Contact Area and Friction in Bulk Metal Forming Processes. Wear 1993, 43:381-386.
    • (1993) Wear , vol.43 , pp. 381-386
    • Stancu-Niederkorn, S.1    Engel, U.2    Geiger, M.3
  • 294
    • 0015000678 scopus 로고
    • Increasing Work Roll Life by Improved Roll Cooling Practice
    • Stevens P.G., Ivens K.P., Harper P.J. Increasing Work Roll Life by Improved Roll Cooling Practice. J. Iron and Steel Inst. 1971, 209:1-11.
    • (1971) J. Iron and Steel Inst. , vol.209 , pp. 1-11
    • Stevens, P.G.1    Ivens, K.P.2    Harper, P.J.3
  • 296
    • 84964174278 scopus 로고
    • Experimental Measurements of Lubricant Film Thick-ness in Cold Strip Rolling
    • Sutcliffe M.P.F. Experimental Measurements of Lubricant Film Thick-ness in Cold Strip Rolling. Proc. Inst. Mech. Eng 1990, 204:263-273.
    • (1990) Proc. Inst. Mech. Eng , vol.204 , pp. 263-273
    • Sutcliffe, M.P.F.1
  • 297
    • 0033380359 scopus 로고    scopus 로고
    • Flattening of Random Rough Surfaces in Metal-Forming Processes
    • Sutcliffe M.P.F. Flattening of Random Rough Surfaces in Metal-Forming Processes. ASME, J. Trib. 2000, 121:433-440.
    • (2000) ASME, J. Trib. , vol.121 , pp. 433-440
    • Sutcliffe, M.P.F.1
  • 298
    • 4344640442 scopus 로고    scopus 로고
    • Surface Finish and Friction in Cold Metal Rolling
    • Chapter 4, Elsevier, Oxford, J.G. Lenard (Ed.)
    • Sutcliffe M.P.F. Surface Finish and Friction in Cold Metal Rolling. Metal Forming Science and Practice 2002, 19-59. Chapter 4, Elsevier, Oxford. J.G. Lenard (Ed.).
    • (2002) Metal Forming Science and Practice , pp. 19-59
    • Sutcliffe, M.P.F.1
  • 300
    • 0032165594 scopus 로고    scopus 로고
    • Experimental Measurements of Load and Strip Profile in Thin Strip Rolling
    • Sutcliffe M.P.F., Rayner P.J. Experimental Measurements of Load and Strip Profile in Thin Strip Rolling. Int. J. Mech. Sci. 1998, 40:887-899.
    • (1998) Int. J. Mech. Sci. , vol.40 , pp. 887-899
    • Sutcliffe, M.P.F.1    Rayner, P.J.2
  • 303
  • 304
    • 0002369643 scopus 로고    scopus 로고
    • Inverse Analysis Applied to the Evaluation of Friction and Rheological Parameters in Hot Forming of Steels
    • Szyndler D., Lenard J.G., Fyke S.H., Pietrzyk M. Inverse Analysis Applied to the Evaluation of Friction and Rheological Parameters in Hot Forming of Steels. Metal Forming 2000, Kraków 2000, 101-106.
    • (2000) Metal Forming 2000, Krako acute;w , pp. 101-106
    • Szyndler, D.1    Lenard, J.G.2    Fyke, S.H.3    Pietrzyk, M.4
  • 306
    • 0017955245 scopus 로고
    • Theory of Rolling for the Range of Mixed Friction
    • Tamano T., Yanagimoto S. Theory of Rolling for the Range of Mixed Friction. Bulletin of the JSME 1978, 21:592-599.
    • (1978) Bulletin of the JSME , vol.21 , pp. 592-599
    • Tamano, T.1    Yanagimoto, S.2
  • 308
    • 4244082929 scopus 로고    scopus 로고
    • Friction Studies at Different Normal Pressures with Alternative Ring-Compression Tests
    • Tan X., Martins P.A.F., Bay N., Zhang W. Friction Studies at Different Normal Pressures with Alternative Ring-Compression Tests. 7th Int. Conf. on Metal Forming 1998, 292-297.
    • (1998) 7th Int. Conf. on Metal Forming , pp. 292-297
    • Tan, X.1    Martins, P.A.F.2    Bay, N.3    Zhang, W.4
  • 310
    • 17444392881 scopus 로고    scopus 로고
    • VAI Steckel Mill Technology: Economical and Flexible Production of Hot-Rolled Strip and Plates
    • Thaller G., Djumlija G., Gruber W., Champion N., Marples A. VAI Steckel Mill Technology: Economical and Flexible Production of Hot-Rolled Strip and Plates. Rev. Met. Paris 2005, 3:251-261.
    • (2005) Rev. Met. Paris , vol.3 , pp. 251-261
    • Thaller, G.1    Djumlija, G.2    Gruber, W.3    Champion, N.4    Marples, A.5
  • 311
    • 84882144671 scopus 로고    scopus 로고
    • A Study of the Temperature at the Interface of the Work Roll and the Thin Scale Layer on a Low Carbon Steel During Hot Rolling
    • Tiley J.B., Lenard J.G. A Study of the Temperature at the Interface of the Work Roll and the Thin Scale Layer on a Low Carbon Steel During Hot Rolling. The ISS 45th Mechanical Working and Steel Processing Conference 2003, 103-113.
    • (2003) The ISS 45th Mechanical Working and Steel Processing Conference , pp. 103-113
    • Tiley, J.B.1    Lenard, J.G.2
  • 312
    • 0022078251 scopus 로고
    • The Mechanics of High-Speed Rolling of Viscoplastic Materials
    • Tirosh J., Iddan D., Pawelski O. The Mechanics of High-Speed Rolling of Viscoplastic Materials. ASME, J. Applied Mechanics 1985, 52:309-318.
    • (1985) ASME, J. Applied Mechanics , vol.52 , pp. 309-318
    • Tirosh, J.1    Iddan, D.2    Pawelski, O.3
  • 313
    • 49749179409 scopus 로고
    • Roll Separating Force and Minimum Thickness of Cold-Rolled Strips
    • Tong K., Sachs G. Roll Separating Force and Minimum Thickness of Cold-Rolled Strips. J. Mech. Phys. Solids 1957, 6:35-46.
    • (1957) J. Mech. Phys. Solids , vol.6 , pp. 35-46
    • Tong, K.1    Sachs, G.2
  • 314
    • 0003432018 scopus 로고
    • Specific Heat - Metallic Elements and Alloys, IFI Plenum, New York - Washington
    • Touloukian Y.S., Buyco E.H. Thermomechanical Properties of Matter 1970, vol. 4. Specific Heat - Metallic Elements and Alloys, IFI Plenum, New York - Washington.
    • (1970) Thermomechanical Properties of Matter , vol.4
    • Touloukian, Y.S.1    Buyco, E.H.2
  • 315
    • 8344243574 scopus 로고    scopus 로고
    • Doctoral Dissertation, Technische Universiteit Delft, The Netherlands
    • Trijssenaar M. Emulsion Lubrication in Cold Rolling 2002, Doctoral Dissertation, Technische Universiteit Delft, The Netherlands.
    • (2002) Emulsion Lubrication in Cold Rolling
    • Trijssenaar, M.1
  • 317
    • 0002690576 scopus 로고    scopus 로고
    • Low Temperature Superplasticity of Ultra-Fine Grained 5083 Aluminum Alloy Produced by Accumulative Roll-Bonding
    • Tsuji N., Shiotsuki K., Utsunomiya H., Saito Y. Low Temperature Superplasticity of Ultra-Fine Grained 5083 Aluminum Alloy Produced by Accumulative Roll-Bonding. Materials Science Forum 1999, 304-306:73-78.
    • (1999) Materials Science Forum , vol.304-306 , pp. 73-78
    • Tsuji, N.1    Shiotsuki, K.2    Utsunomiya, H.3    Saito, Y.4
  • 318
    • 0032638093 scopus 로고    scopus 로고
    • Ultra-fine Grained Bulk Steel Produced by Accumulative Roll-Bonding (ARB) Process
    • Tsuji N., Saito Y., Utsunomiya H., Tanigawa S. Ultra-fine Grained Bulk Steel Produced by Accumulative Roll-Bonding (ARB) Process. Scripta Materialia 1999, 40:795-800.
    • (1999) Scripta Materialia , vol.40 , pp. 795-800
    • Tsuji, N.1    Saito, Y.2    Utsunomiya, H.3    Tanigawa, S.4
  • 320
    • 0037047807 scopus 로고    scopus 로고
    • Analytical Approach to the Cold-and-Hot Bond Rolling of Sandwich Sheet with Outer Hard and Inner Soft Layers
    • Tzou G.Y., Tieu A.K., Huang M.N., Lin C.Y., Wu E.Y. Analytical Approach to the Cold-and-Hot Bond Rolling of Sandwich Sheet with Outer Hard and Inner Soft Layers. J. Mat. Proc. Techn. 2002, 125-126:664-669.
    • (2002) J. Mat. Proc. Techn. , vol.125-126 , pp. 664-669
    • Tzou, G.Y.1    Tieu, A.K.2    Huang, M.N.3    Lin, C.Y.4    Wu, E.Y.5
  • 325
    • 0002165826 scopus 로고
    • A Study of Interface Friction in Plastic Compression
    • van Rooyen G.T., Backofen W.A. A Study of Interface Friction in Plastic Compression. Int. J. Mech. Sci. 1960, 1-27.
    • (1960) Int. J. Mech. Sci. , pp. 1-27
    • van Rooyen, G.T.1    Backofen, W.A.2
  • 327
    • 0018923411 scopus 로고
    • Modelling of the Rolling Process - I Inhomogeneous Deformation Model
    • Venter R., Abd-Rabbo A. Modelling of the Rolling Process - I Inhomogeneous Deformation Model. Int. J. Mech. Sci. 1980, 22:83-92.
    • (1980) Int. J. Mech. Sci. , vol.22 , pp. 83-92
    • Venter, R.1    Abd-Rabbo, A.2
  • 329
    • 84882109810 scopus 로고
    • Simulation of Hot Strip Rolling by Compression Testing
    • The University of New Brunswick, Fredericton
    • Wang F. Simulation of Hot Strip Rolling by Compression Testing. PhD Thesis 1989, The University of New Brunswick, Fredericton.
    • (1989) PhD Thesis
    • Wang, F.1
  • 330
    • 0025792065 scopus 로고
    • The Constitutive Behaviour of a Nb-V HSLA Steel in the Temperature Range of 900 to 975 deg;C
    • Wang F., Lenard J.G. The Constitutive Behaviour of a Nb-V HSLA Steel in the Temperature Range of 900 to 975°C. Steel Research 1991, 2:66-71.
    • (1991) Steel Research , vol.2 , pp. 66-71
    • Wang, F.1    Lenard, J.G.2
  • 331
    • 0026747489 scopus 로고
    • An Experimental Study of Interfacial Friction - Hot Ring Compression
    • Wang F., Lenard J.G. An Experimental Study of Interfacial Friction - Hot Ring Compression. ASME, J. Eng. Mat. Techn. 1992, 114:13-18.
    • (1992) ASME, J. Eng. Mat. Techn. , vol.114 , pp. 13-18
    • Wang, F.1    Lenard, J.G.2
  • 332
    • 17144438746 scopus 로고
    • Friction at High Normal Pressures
    • Wanheim T. Friction at High Normal Pressures. Wear 1973, 25:225-244.
    • (1973) Wear , vol.25 , pp. 225-244
    • Wanheim, T.1
  • 333
    • 0018151832 scopus 로고
    • A Model for Friction in Metal Forming Processes
    • Wanheim T., Bay N. A Model for Friction in Metal Forming Processes. Annals of the CIRP 1978, 27:189-194.
    • (1978) Annals of the CIRP , vol.27 , pp. 189-194
    • Wanheim, T.1    Bay, N.2
  • 334
    • 0016059693 scopus 로고
    • A Theoretically Determined Model for Friction in Metal Working Processes
    • Wanheim T., Bay N., Petersen A.S. A Theoretically Determined Model for Friction in Metal Working Processes. Wear 1974, 28:251-258.
    • (1974) Wear , vol.28 , pp. 251-258
    • Wanheim, T.1    Bay, N.2    Petersen, A.S.3
  • 335
    • 0343803675 scopus 로고    scopus 로고
    • Thermal Behavior of High Speed Steel Work Rolls in the Finishing Stands of a Hot Strip Mill
    • Wankhede U., Samarasekera I.V. Thermal Behavior of High Speed Steel Work Rolls in the Finishing Stands of a Hot Strip Mill. Iron and Steelmaker 1997, 24:55-60.
    • (1997) Iron and Steelmaker , vol.24 , pp. 55-60
    • Wankhede, U.1    Samarasekera, I.V.2
  • 336
    • 0010229425 scopus 로고
    • New Tools for Prediction and Analysis in the Behaviour Science
    • Harvard University, Cambridge, MA
    • Werbos P. New Tools for Prediction and Analysis in the Behaviour Science. Ph D Thesis 1974, Harvard University, Cambridge, MA.
    • (1974) Ph D Thesis
    • Werbos, P.1
  • 338
    • 0002675201 scopus 로고
    • Neural-Networks
    • White H. Neural-Networks. AI Expert 1989, 48-52.
    • (1989) AI Expert , pp. 48-52
    • White, H.1
  • 339
    • 0002037432 scopus 로고
    • The Properties of Random Surfaces of Significance in Their Contact
    • Whitehouse D.J., Archard J.F. The Properties of Random Surfaces of Significance in Their Contact. Proc. Roy. Soc. London, Series A 1970, 316:97-121.
    • (1970) Proc. Roy. Soc. London, Series A , vol.316 , pp. 97-121
    • Whitehouse, D.J.1    Archard, J.F.2
  • 340
    • 84882059210 scopus 로고    scopus 로고
    • Spolecnost OCELOVE PASY, Opava, Czech Republic, J. Boruta, A. Kisa, T. Kure, B. Pasternak, G. Zamarsky, P. Zela (Eds.)
    • Wiklund O. Proceedings of 5th International Conference "Steel Strip '96 1996, 136. Spolecnost OCELOVE PASY, Opava, Czech Republic. J. Boruta, A. Kisa, T. Kure, B. Pasternak, G. Zamarsky, P. Zela (Eds.).
    • (1996) Proceedings of 5th International Conference quot;Steel Strip '96 , pp. 136
    • Wiklund, O.1
  • 342
    • 0012469117 scopus 로고    scopus 로고
    • Improved Modelling of Temper Rolling Using Finite Elements to Fit Fast 'Empirical' Models Combined with Artificial Neural Networks
    • The Institute of Materials, London, J.H. Beynon, M.T. Clark, P. Kern, P. Ingham, K. Waterson (Eds.)
    • Wiklund O. Improved Modelling of Temper Rolling Using Finite Elements to Fit Fast 'Empirical' Models Combined with Artificial Neural Networks. Proceedings of International Conference "Modelling of metal rolling processes 3 1999, 72. The Institute of Materials, London. J.H. Beynon, M.T. Clark, P. Kern, P. Ingham, K. Waterson (Eds.).
    • (1999) Proceedings of International Conference quot;Modelling of metal rolling processes 3 , pp. 72
    • Wiklund, O.1
  • 343
    • 79951676822 scopus 로고    scopus 로고
    • Modelling and Control of Temper Rolling and Skin Pass Rolling
    • Chapter 15, in, Elsevier, Oxford, J.G. Lenard (Ed.)
    • Wiklund O., Sandberg F. Modelling and Control of Temper Rolling and Skin Pass Rolling. Metal Forming Science and Practice 2002, Chapter 15, in, Elsevier, Oxford. J.G. Lenard (Ed.).
    • (2002) Metal Forming Science and Practice
    • Wiklund, O.1    Sandberg, F.2
  • 344
    • 0028734645 scopus 로고
    • Low Speed Mixed Lubrication of Bulk Metal Forming Processes
    • ASME, K. Dohda, S. Jahanmir, W.R.D. Wilson (Eds.)
    • Wilson W.R.D., Chang D-F. Low Speed Mixed Lubrication of Bulk Metal Forming Processes. Tribology in Manufacturing 1994, 159-168. ASME. K. Dohda, S. Jahanmir, W.R.D. Wilson (Eds.).
    • (1994) Tribology in Manufacturing , pp. 159-168
    • Wilson, W.R.D.1    Chang, D.-F.2
  • 345
    • 0003049444 scopus 로고
    • An Isothermal Hydrodynamic Lubrication Theory for Strip Rolling with Front and Back Tension
    • London, E. Mech (Ed.)
    • Wilson W.R.D., Walowit J.A. An Isothermal Hydrodynamic Lubrication Theory for Strip Rolling with Front and Back Tension. Proc. 1971 Tribology Convention, I 1972, 164-172. London. E. Mech (Ed.).
    • (1972) Proc. 1971 Tribology Convention, I , pp. 164-172
    • Wilson, W.R.D.1    Walowit, J.A.2
  • 346
    • 0028468861 scopus 로고
    • A Mixed Flow Model for Lubrication with Emulsions
    • Wilson W.R.D., Sakaguchi Y., Schmid S.R. A Mixed Flow Model for Lubrication with Emulsions. Trib. Trans. 1994, 37:543-551.
    • (1994) Trib. Trans. , vol.37 , pp. 543-551
    • Wilson, W.R.D.1    Sakaguchi, Y.2    Schmid, S.R.3
  • 347
    • 4344598008 scopus 로고    scopus 로고
    • Numerical Simulation of Sheet Metal Forming
    • Elsevier, Oxford, J.G. Lenard (Ed.)
    • Worswick M.J. Numerical Simulation of Sheet Metal Forming. Metal Forming Science and Practice 2002, Elsevier, Oxford. J.G. Lenard (Ed.).
    • (2002) Metal Forming Science and Practice
    • Worswick, M.J.1
  • 348
    • 0024304550 scopus 로고
    • Development of a Method for the Prediction of Pressure-Viscosity Coefficients of Lubricating Oils Based on free-Volume Theory
    • Wu C.S., Klaus E.E., Duda J.L Development of a Method for the Prediction of Pressure-Viscosity Coefficients of Lubricating Oils Based on free-Volume Theory. ASME, J. Trib. 1989, 111:121-128.
    • (1989) ASME, J. Trib. , vol.111 , pp. 121-128
    • Wu, C.S.1    Klaus, E.E.2    Duda, J.L.3
  • 349
    • 0032028226 scopus 로고    scopus 로고
    • Solid-state Bonding of Iron-Based Alloys, Steel, C Brass and Aluminium alloys
    • Wu H-Y., Lee S., Wang J-Y. Solid-state Bonding of Iron-Based Alloys, Steel, C Brass and Aluminium alloys. J. Mat. Proc. Techn. 1998, 75:173-179.
    • (1998) J. Mat. Proc. Techn. , vol.75 , pp. 173-179
    • Wu, H.-Y.1    Lee, S.2    Wang, J.-Y.3
  • 351
    • 0037083927 scopus 로고    scopus 로고
    • Structure and Properties of AA3003 Alloy Produced by Accumulative Roll Bonding Process
    • Xing Z.P., Kang S.B., Kim H.W. Structure and Properties of AA3003 Alloy Produced by Accumulative Roll Bonding Process. J. Mat. Sci. 2002, 37:717-722.
    • (2002) J. Mat. Sci. , vol.37 , pp. 717-722
    • Xing, Z.P.1    Kang, S.B.2    Kim, H.W.3
  • 352
    • 0343628555 scopus 로고
    • Prediction of Microstructural Changes and Mechanical Properties in Hot Strip Rolling
    • Pergamon Press, Winnipeg, G.E. Ruddle, A.F. Crawley (Eds.)
    • Yada H. Prediction of Microstructural Changes and Mechanical Properties in Hot Strip Rolling. Proc. Symp. Accelerated Cooling of Rolled Steel 1987, 103-119. Pergamon Press, Winnipeg. G.E. Ruddle, A.F. Crawley (Eds.).
    • (1987) Proc. Symp. Accelerated Cooling of Rolled Steel , pp. 103-119
    • Yada, H.1
  • 353
    • 0031148287 scopus 로고    scopus 로고
    • Lubrication with Emulsion: First Report, the Extended Reynolds Equation
    • Yan S., Kuroda S. Lubrication with Emulsion: First Report, the Extended Reynolds Equation. Wear 1997, 206:230-237.
    • (1997) Wear , vol.206 , pp. 230-237
    • Yan, S.1    Kuroda, S.2
  • 354
    • 0031148056 scopus 로고    scopus 로고
    • Lubrication with Emulsion II. The Viscosity Coefficients of Emulsions
    • Yan S., Kuroda S. Lubrication with Emulsion II. The Viscosity Coefficients of Emulsions. Wear 1997, 206:238-243.
    • (1997) Wear , vol.206 , pp. 238-243
    • Yan, S.1    Kuroda, S.2
  • 355
    • 7244220144 scopus 로고    scopus 로고
    • A Study of Warm and Cold Roll-Bonding of an Aluminium Alloy
    • Yan H., Lenard J.G. A Study of Warm and Cold Roll-Bonding of an Aluminium Alloy. Mat. Sci. Eng., A 2004, 385:419-428.
    • (2004) Mat. Sci. Eng., A , vol.385 , pp. 419-428
    • Yan, H.1    Lenard, J.G.2
  • 356
  • 357
    • 0037380549 scopus 로고    scopus 로고
    • On-line and Off-line Models for the Rolling Process
    • Yuen W.Y.D. On-line and Off-line Models for the Rolling Process. Scan. J. Metall. 2003, 32:86-93.
    • (2003) Scan. J. Metall. , vol.32 , pp. 86-93
    • Yuen, W.Y.D.1
  • 358
    • 0028461243 scopus 로고
    • Use of Lubricants During Cold Rolling of Aluminium
    • Zhang S., Lenard J.G. Use of Lubricants During Cold Rolling of Aluminium. Synthetic Lubrication 1994, 11:99-109.
    • (1994) Synthetic Lubrication , vol.11 , pp. 99-109
    • Zhang, S.1    Lenard, J.G.2
  • 359
    • 3643136433 scopus 로고    scopus 로고
    • Cold Welding - Theoretical Modeling of the Weld Formation
    • Zhang W., Bay N. Cold Welding - Theoretical Modeling of the Weld Formation. Welding Research Supplement 1997, 76:417-420.
    • (1997) Welding Research Supplement , vol.76 , pp. 417-420
    • Zhang, W.1    Bay, N.2
  • 360
    • 84882113137 scopus 로고
    • Numerical Modelling of Cold Rolling of Metal Plate Adopting a General Friction Model
    • A.A. Balkema, Rotterdam, P. Dawson, H. Shen (Eds.)
    • Zhang W., Peeters M.J.P.A., Bay N. Numerical Modelling of Cold Rolling of Metal Plate Adopting a General Friction Model. Simulation of Materials Processing 1995, A.A. Balkema, Rotterdam. P. Dawson, H. Shen (Eds.).
    • (1995) Simulation of Materials Processing
    • Zhang, W.1    Peeters, M.J.P.A.2    Bay, N.3
  • 361
    • 23844440857 scopus 로고    scopus 로고
    • How Does Dry Contact Occur in Elastohydrodynamic Lubrication?
    • Zhang Y. How Does Dry Contact Occur in Elastohydrodynamic Lubrication?. Ind. Lubr. Trib. 2005, 57:176-180.
    • (2005) Ind. Lubr. Trib. , vol.57 , pp. 176-180
    • Zhang, Y.1
  • 362
    • 0028119813 scopus 로고
    • Elastohydrodynamic Lubrication with O/W Emulsions
    • Zhu D., Biresaw G., Clark S.J., Kasun T.J. Elastohydrodynamic Lubrication with O/W Emulsions. ASME, J. Trib. 1994, 116:310-320.
    • (1994) ASME, J. Trib. , vol.116 , pp. 310-320
    • Zhu, D.1    Biresaw, G.2    Clark, S.J.3    Kasun, T.J.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.