Relationships between microstructure, mechanical and dielectric properties of different alumina materials

Journal of the European Ceramic Society

Volumn 29, Issue 13, 2009, Pages 2747-2756

  Haddour, L ^a   Mesrati, N ^a   Goeuriot, D ^b   Treheux D ^c  

^a ECOLE NATIONALE POLYTECHNIQUE   (Algeria)

^b LCG   (France)

^c LABORATOIRE DE TRIBOLOGIE ET DYNAMIQUE DES SYSTÈMES   (France)

Author keywords

Al2O3; Breakdown; Microstructure final; Reinforcement; Toughness and toughening; Wear resistance

Indexed keywords

AL2O3; ALUMINA MATERIALS; BREAKDOWN; BREAKDOWN STRENGTHS; DIELECTRIC BREAKDOWNS; DIELECTRIC CHARACTERISTICS; FRICTION AND WEAR; GRAIN SIZE; HIGH BREAKDOWN; MECHANICAL AND DIELECTRIC PROPERTIES; MECHANICAL POINTS; MICROSTRUCTURAL PARAMETERS; MICROSTRUCTURE FINAL; NON-CONDUCTIVE MATERIALS; SECONDARY PHASIS; THIRD BODY; TOUGHNESS AND TOUGHENING; WEAR DEBRIS;

ALUMINUM; CERAMIC MATERIALS; CONDUCTIVE MATERIALS; DEBRIS; DIELECTRIC MATERIALS; DIELECTRIC PROPERTIES; ELECTRIC BREAKDOWN; GRAIN SIZE AND SHAPE; MICROSTRUCTURE; REINFORCEMENT;

WEAR RESISTANCE;

EID: 67349129675     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2009.03.022     Document Type: Article

References (34)

1. Virkar A.V., and Gordon R.S. Fracture properties of polycrystalline lithia-stabilized alumina. J. Am. Ceram Soc. 60 1-2 (1977) 58-61
2. Rice R.W., Freiman S.W., and Becher P.F. Grain size dependence of fracture energy in ceramics. J. Am. Ceram. Soc. 64 (1981) 345-350
3. 3. J. Am. Ceram. Soc. 58 11-12 (1975) 537-538
4. Noone M.J., and Mehan R.L. In: Bradt R.C., Hasselman D.P.H., and Lange F.F. (Eds). Fracture Mechanics of Ceramics vol. 1 (1973), Plenum, New York
5. 3. J. Am. Ceram. Soc. 56 1 (1973) 7-11
6. 3. Ceram. Int. 12 (1986) 33-37
7. Page T.F., and Sargent P.M. Proc. Br. Ceram. Soc. 26 (1978) 209-224
8. Knudsen F.P. Dependence of the mechanical properties of brittle polycrystalline specimens on porosity and grain size. J. Am. Ceram. Soc. 42 8 (1959) 376-387
9. Passmore E.M., Spriggs R.M., and Vasilos T. Strength-grain size-porosity relations in alumina. J. Am. Ceram. Soc. 48 1 (1973) 1-7
10. 2 particles. J. Am. Ceram. Soc. 61 1-2 (1978) 85-86
11. Evans A.G., and Heuer A.H. Transformation toughening in ceramics: martensitic transformation in crack-tip stress. J. Am. Ceram. Soc. 63 5-6 (1980) 241-248
12. Liebault, J., Comportement d'alumines face à l'injection des charges. Relation microstructure-claquage diélectrique-mesure de charge d'espace. Thèse Ecole Nationale Supérieure des Mines de St Etienne, N°206 TD, 1999.
13. Liebault J., Vallayer J., Goeuriot D., Tréheux D., and Thevenot F. How the trapping of charges can explain the dielectric breakdown performance of alumina ceramics. J. Eur. Ceram. Soc. 21 (2001) 389-397
14. Morse C.T., and Hill G.J. The electric strength of alumina: the effect of porosity. Proc. Br. Ceram. Soc. 18 (1970) 23
15. Beaudet S., Bernier J.C., and Autissier D. Doping elements influence on microstructural and dielectric properties of alpha alumina. Key Eng. Mater. 132-136 (1997) 1179
16. Trabelsi R., Tréheux D., Orange G., Fantozzi G., Homerin P., and Thévenot F. Relationships between mechanical properties and wear resistance of alumina-zirconia ceramic composite. J. Am. Soc. Lubrication Eng. Tribol. Trans. 32 (1989) 77-84
17. 3-AION ceramic composite. J. Eur. Ceram. Soc. 20 (2003) 1829-1836
18. Kim S., Kato K., Hokkirigawa K., and Abe H. Wear mechanism of ceramic materials in dry rolling friction. J. Tribol. 108 (1986) 522
19. ZumGahr K.H., and Bundshuh W. Effect of grain size and sliding wear of oxide ceramics. Wear (1993) 162-164
20. Mukhopadhyay A.K., and Yiu-Wing M. Grain size effect on abrasive wear mechanisms in alumina ceramics. Wear 162-164 (1993) 258-268
21. 4C. Ceram. Eng. Sci. Proc. 6 7-8 (1985) 977-994
22. Hockey B.J. Plastic deformation of aluminium oxide by indentation and abrasion. J. Am. Ceram. Soc. 54 5 (1971) 223
23. 3 crystals. Phys. Rev. B 54 1 (1996) 139-143
24. Le Gressus C., and Blaise G. Breakdown phenomena related to trapping/detrapping processes in wide band-gap insulators. IEEE Trans. Electr. Insul. 27 (1992) 472-481
25. Touzin M., Goeuriot D., Fitting H.J., Guerret-Piécourt C., Juvé D., and Tréheux D. Relationships between dielectric breakdown resistance and charge transport in alumina materials-Effects of the microstructure. J. Eur. Ceram. Soc. 27 (2007) 1193-1197
26. Fayeulle S., Berroug H., Hamazaoui B., Tréheux D., and Le Gressus C. Role of dielectric properties in the tribological behaviour of insulators. Wear 162-164 (1993) 906-912
27. Tréheux D., Bigarré J., and Fayeulle S. Dielectric aspects of the ceramic tribology. In: Vincenzini P. (Ed). 9th Cimtec World Ceramics Congress. Ceramics getting into 2000s. Part A. Techna Srl (1999) 563-574
28. Guerret-Piécourt C., Vallayer J., and Tréheux D. Limitation induced by electrical charges effects on micromechanisms. Wear 254 (2003) 950-958
29. Barceinas-Sanchez J.D.O., and Rainforth W.M. On the role of plastic deformation during the mild wear of alumina. Acta Mater. 46 18 (1998) 6474-6483
30. Liang K.M., Orange G., and Fantozzi G. Evaluation by indentation of fracture toughness of ceramic materials. J. Mater. Sci. 25 (1990) 207-214
31. Simpson L.A., Ritchie I.G., and Lloyd D.J. J. Am. Ceram. Soc. 58 11-12 (1975) 537-538
32. Evans A.G. The science of ceramic machining and surface finishing. In: Hockey B.J., and Rice R.W. (Eds). National Bureau of Standards Special Publication 562 (1979), US.Government Printing office, Washington D.C. P1
33. Touzin, M. and Goeuriot D., Alumina based ceramics for high-voltage insulation-part I: influence of elaboration parameters on dielectric breakdown resistance, J. Eur. Ceram. Soc., 2009, submitted for publication.
34. Fothergill J.C. Filamentary electromechanical breakdown. IEEE Trans. Electr. Insul. 26 6 (1991) 1124-1129