Simulation of phase-change heat transfer during cooling stage of gas-assisted injection molding of high-density polyethylene via enthalpy transformation approach

Polymer Engineering and Science

Volumn 49, Issue 6, 2009, Pages 1234-1242

  Yang, Bin ^a   Fu, Xiao Rong ^b   Yang, Wei ^a   Liang, Shui Po ^a   Hu, Shen ^a   Yang, Ming Bo ^a  

^a Sichuan University ^*  (China)

^b SICHUAN UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

COOLING; ENTHALPY; HIGH DENSITY POLYETHYLENES; INJECTION MOLDING; NUMERICAL METHODS; PLASTIC PRODUCTS;

COOLING RATES; COOLING STAGE; CRYSTALLINE STRUCTURE; ENTHALPY TRANSFORMATIONS; GAS-ASSISTED INJECTION MOLDING; HIGH-DENSITY POLYETHYLENES; LIGHT WEIGHT; MOLDING CYCLES; PHASE CHANGE HEAT TRANSFER; STRUCTURAL RIGIDITY;

CRYSTALLINE MATERIALS;

EID: 67049125749     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.21291     Document Type: Article

References (46)

1. L.S. Turng, Adv. Polym. Tech., 14, 1 (1995).
2. W. Michaeli and E. Haberstroh, Kunststoffe Plast. Eur., 90,52 (2000).
3. R.E. Khayat, A. Derdouri, and L.P. Hebert, J. Non-Newtonian Fluid Mech., 22, 253 (1995).
4. S.C. Chen, K.F. Hsu, and J.S. Huang, J. Appl. Polym. Sci.,58, 793 (1995).
5. S.C. Chen, N.T. Cheng, and K.S. Hsu, Int. Commun. Heat Mass Transfer, 22, 319 (1995).
6. G.Q. Zheng, W. Yang, L. Huang, Z.M. Li, M.B. Yang, B.Yin, Q. Li, C.T. Liu, and C.Y. Shen, J. Mater. Sci., 42,7275 (2007).
7. D.M. Gao, K.T. Nguyen, A. GarciaRejon, and G. Salloum,Int. Polym. Proc., 12, 267 (1997).
8. H.M. Zhou and D.Q. Li, J. Appl. Polym. Sci., 90, 2364 (2003).
9. A. Marcilla, A. Odjo Omoniyi, R. Ruiz Femenia, and J.C. Garcia Quesada, J. Mater. Process. Tech., 178, 350 (2006).
10. L. Johnson, P. Olley, and P.D. Coates, Plast. Rubber Compos.,29, 31 (2000).
11. C.T. Li, J.W. Shin, A.I. Isayev, and H.S. Lee, Polym. Eng.Sci., 44, 992 (2004).
12. S.C. Chen, S.Y. Hu, S.M. Chao, and R.D. Chien, Polym. Eng. Sci., 40, 595 (2000).
13. Y.P. Chang, S.Y. Hu, and S.C. Chen, Int. Commun. Heat Mass Transfer, 25, 989 (1998).
14. S.Y. Yang, F.Z. Huang, and W.N. Liau, Polym. Eng. Sci.,36, 2824 (1996).
15. R.D. Chien, S.C. Chen, M.C. Lin, P.H. Lee, and C.S. Chen, J. Appl. Polym. Sci., 90, 2979 (2003).
16. S.J. Liu and I.H. Lin, Plast. Rubber Compos., 31, 28 (2002).
17. X. Lu, H.H. Chiang, L. Fong, J. Zhao, and S.C.S. Chen, Polym. Eng. Sci., 39, 62 (1999).
18. H. Potente, E. Moritzer, and C. Obermann, Polym. Eng. Sci., 36, 2163 (1996).
19. M. Chen, D.G. Yao, and B. Kim, Polym. Plast. Technol. Eng., 40, 479 (2001).
20. S.J. Liu and K.H. Chang, Adv. Polym. Tech., 22, 1 (2003).
21. S.J. Liu and C.Y. Chang, J. Reinf. Plast. Compos., 22, 711 (2003).
22. V. La Carrubba, W. Gabriëlse, and S. Piccarolo, Macromol. Mater. Eng. 290, 1056 (2005).
23. M.R. Kamal and P.G. Lafleur, Polym. Eng. Sci., 24, 692 (1984).
24. G.Q. Zheng, W. Yang, M.B. Yang, J.B. Chen, Q. Li, and C.Y. Shen, Polym. Eng. Sci., 48, 976 (2008).
25. G.Q. Zheng, L. Huang, W. Yang, B. Yang, M.B. Yang, C.T. Liu, and C.Y. Shen, Polymer, 48, 5486 (2007).
26. L. Huang, G.Q. Zheng, W. Yang, B. Yang, M.B. Yang, Q. Li, and C.Y. Shen, Polym. Mater. Sci. Eng., 23, 198 (2007).
27. G.Q. Zheng, W. Yang, B. Yin, M.B. Yang, C.T. Liu, and C.Y. Shen, J. Appl. Polym. Sci., 102, 3069 (2006).
28. G.Q. Zheng, W. Yang, C.T. Liu, C.Y. Shen, and M.B. Yang, Mater. Lett., 61, 3436 (2007).
29. A.B. Crowley, Int. J. Heat Mass Transfer, 21, 215 (1978).
30. J.A. Luoma and V.R. Voller, Appl. Math. Model., 24, 575 (2000).
31. J. Caldwell and A.W. Date, Commun. Numer. Methods Eng., 19, 865 (2003).
32. Y. Cao and A. Faghri, Int. J. Heat Mass Transfer, 32, 1289 (1989).
33. B. Yang, X.R. Fu, W. Yang, L. Huang, M.B. Yang, and J.M. Feng, Polym. Eng. Sci., 48, 1707 (2008).
34. S.P. Tao, X.R. Fu, M.B. Yng, and R.Z. Yu, Acta Polym.Sin., 1, 8 (2005).
35. Y. Bai, B. Yin, X.R. Fu, and M.B. Yang, J. Appl. Polym. Sci., 102, 2249 (2006).
36. G. Titomanlio, S. Piccarolo, and G. Levati, J. Appl. Polym. Sci., 35, 1483 (1988).
37. Y.G. Zhou, B.B. Dong, J.B. Chen, and C. Y. Shen, Polym. Mater. Sci. Eng., 22, 28 (2006).
38. M.N. Özisik, Heat Conduction, Wiley, New York (1980).
39. S.V. Patankar, Numerical Heat Transfer and Fluid Flow, McGraw-Hill, New York (1980).
40. Z. Tadmor, J. Appl. Polym. Sci., 18, 1753 (1974).
41. G.D. Smith, Numerical Solution of Partial Differential Equations, Oxford University Press, London (1965).
42. H.H. Chiang, C.A. Hieber, and K.K. Wang, Polym. Eng. Sci., 31, 125 (1991).
43. P. Supaphol and J.E. Spruiell, J. Polym. Sci. Part B: Polym. Phys., 36, 681 (1998).
44. V. Brucato, S. Piccarolo, and V. La Carrubbab, Chem. Eng. Sci., 57, 4129 (2002).
45. A.I. Isayev, T.W. Chan, M. Gmerek, and K. Shimojo, J. Appl. Polym. Sci., 55, 821 (1995).
46. R.Y. Chang and B.D. Tsaur, Polym. Eng. Sci., 35, 1222 (1995).