Hydrodesulfurization of dibenzothiophene using CoMo/Al-HMS nanocatalyst synthesized by supercritical deposition

Journal of Supercritical Fluids

Volumn 49, Issue 2, 2009, Pages 239-248

  Alibouri, M ^a,b   Ghoreishi, S M ^b   Aghabozorg, H R ^a  

^a RESEARCH INSTITUTE OF PETROLEUM INDUSTRY RIPI   (Iran)

^b ISFAHAN UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Al HMS support; CoMo nanocatalyst; Hexagonal mesoporous structure; Hydrodesulfurization; Low sulfur fuel; Supercritical deposition

Indexed keywords

AL-HMS SUPPORT; COMO NANOCATALYST; HEXAGONAL MESOPOROUS STRUCTURE; LOW-SULFUR FUEL; SUPERCRITICAL DEPOSITION;

ALUMINUM; CARBON DIOXIDE; CATALYSIS; CATALYST ACTIVITY; CHEMISORPTION; DESORPTION; GAS ADSORPTION; HYDRODESULFURIZATION; METHANOL; MOLYBDENUM; OXYGEN; RATE CONSTANTS; SODIUM COMPOUNDS; SULFUR; SUPERCRITICAL FLUID EXTRACTION;

CATALYST SELECTIVITY;

EID: 65549095144     PISSN: 08968446     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.supflu.2009.01.002     Document Type: Article

References (59)

1. Choi K.-H., Kunisada N., Korai Y., Mochida I., and Nakano K. Facile ultra-deep desulfurization of gas oil through two-stage or -layer catalyst bed. Catal. Today 86 (2003) 277-286
2. Murali Dhar G., Muthu Kumaran G., Kumar M., Rawat K.S., Sharma L.D., David Raju B., and Rama Rao K.S. Physico-chemical characterization and catalysis on SBA-15 supported molybdenum hydrotreating catalysts. Catal. Today 99 (2005) 309-314
3. Song C., and Reddy K.M. Mesoporous molecular sieve MCM-41 supported Co-Mo catalyst for hydrodesulfurization of dibenzothiophene in distillate fuels. Appl. Catal. A 176 (1999) 1-10
4. Reddy K.M., Wei B., and Song C. Mesoporous molecular sieve MCM-41 supported Co-Mo catalyst for hydrodesulfurization of petroleum resids. Catal. Today 43 (1998) 261-272
5. Wang A., Wang Y., Kabe T., Chen Y., Ishihara A., and Qian W. Hydrodesulfurization of dibenzothiophene over siliceous MCM-41-supported catalysts I. Sulfided Co-Mo catalysts. J. Catal. 199 (2001) 19-29
6. 3 extruded supports. Appl. Catal. A 183 (1999) 199-208
7. Corma A., Martínez A., Martínez-Soria V., and Montón J.B. Hydrocracking of vacuum gasoil on the novel mesoporous MCM-41 aluminosilicate catalyst. J. Catal. 153 (1995) 25-31
8. Ramirez J., Contreras R., Castillo P., Klimova T., Źrate R., and Luna R. Characterization and catalytic activity of CoMo HDS catalysts supported on alumina-MCM-41. Appl. Catal. A 197 (2000) 69-78
9. Williams C.C., Ekerdt J.G., Jehng J.M., Hardcastle F.D., and Wachs I.E. A Raman and ultraviolet diffuse reflectance spectroscopic investigation of alumina-supported molybdenum oxide. J. Phys. Chem. 95 (1991) 8791-8797
10. Chakraborty B., and Viswanathan B. Surface acidity of MCM-41 by in situ IR studies of pyridine adsorption. Catal. Today 49 (1999) 253-260
11. Mokaya R., Jones W., Luan Z., Alba M.D., and Klinowski J. Acidity and catalytic activity of the mesoporous aluminosilicate molecular sieve. Catal. Lett. 37 (1996) 113-120
12. Jentys A., Pham N.H., and Vinek H. Nature of hydroxy groups in MCM-41. J. Chem. Soc., Faraday Trans. 92 (1996) 3287-3291
13. Li X., Wang A., Wang Y., Chen Y., Liu Y., and Hu Y. Hydrodesulfurization of dibenzothiophene over Ni-Mo sulfides supported by proton-exchanged siliceous MCM-41. Catal. Lett. 84 (2002) 107-113
14. Stakheev A.Y., and Kustov L.M. Effects of the support on the morphology and electronic properties of supported metal clusters: modern concepts and progress in 1990s. Appl. Catal. A 188 (1999) 3-35
15. Mariño F., Descorme C., and Duprez D. Supported base metal catalysts for the preferential oxidation of carbon monoxide in the presence of excess hydrogen (PROX). Appl. Catal. B: Environ. 58 (2005) 175-183
16. Carmo M., Paganin V.A., Rosolen J.M., and Gonzalez E.R. Alternative supports for the preparation of catalysts for low-temperature fuel cells: the use of carbon nanotubes. J. Power Sources 142 (2005) 169-176
17. Yu K.M.K., Yeung C.M.Y., Thompsett D., and Tsang S.C. Aerogel-coated metal nanoparticle volloids as novel entities for the synthesis of defined supported metal catalysts. J. Phys. Chem. B 107 (2003) 4515-4526
18. Claus P., Br̈uckner A., Mohr C., and Hofmeister H. Supported gold nanoparticles from quantum dot to mesoscopic size scale: effect of electronic and structural properties on catalytic hydrogenation of conjugated functional groups. J. Am. Chem. Soc. 122 (2000) 11430-11439
19. Okitsu K., Nagaoka S., Tanabe S., Matsumoto H., Mizukoshi Y., and Nagata Y. Sonochemical preparation of size-controlled palladium nanoparticles on alumina surface. Chem. Lett. 3 (1999) 271-272
20. Miller J.M., Dunn B., Tran T.D., and Pekala R.W. Deposition of ruthenium nanoparticles on carbon aerogels for high energy density supercapacitor electrodes. J. Electrochem. Soc. 144 (1997) L309-L311
21. Maldonado-Hodar F.J., Moreno-Castilla C., Rivera-Utrilla J., and Ferro Garcia M.A. Metal-carbon aerogels as catalysts and catalyst supports. Stud. Surf. Sci. Catal. 130 (2000) 1007-1013
22. Bekyarova E., and Kaneko K. Structure and physical properties of tailor-made Ce,Zr-doped carbon aerogels. Adv. Mater. 12 (2000) 1625-1628
23. Maldonado-Hodar F.J., Ferro-Garcia M.A., Rivera-Utrilla J., and Moreno-Castilla C. Synthesis and textural characteristics of organic aerogels, transition-metal-containing organic aerogels and their carbonized derivatives. Carbon 37 (1999) 1199-1205
24. Cushing B.L., Kolesnichenko V.L., and O'Connor C.J. Recent advances in the liquid-phase synthesis of inorganic nanoparticles. Chem. Rev. 104 (2004) 3893-3946
25. Cabãnas A., Long D.P., and Watkins J.J. Deposition of gold films and nanostructures from supercritical carbon dioxide. Chem. Mater. 16 (2004) 2028-2033
26. Hunde E.T., and Watkins J.J. Reactive deposition of cobalt and nickel films from their metallocenes in supercritical carbon dioxide solution. Chem. Mater. 16 (2004) 498-503
27. Blackburn J.M., Long D.P., Cabãnas A., and Watkins J.J. Deposition of conformal copper and nickel films from supercritical carbon dioxide. Science 294 (2001) 141-145
28. Cabãnas A., Blackburn J.M., and Watkins J.J. Deposition of Cu films from supercritical fluids using Cu(I) β-diketonate precursors. Microelectron. Eng. 64 (2002) 53
29. Ghoreishi S.M., and Sharifi S. Modeling of supercritical extraction of Mannitol from plane tree leaf. J. Pharma. Biomed. 24 (2001) 1037-1048
30. Saquing C.D., Cheng T.T., Aindow M., and Erkey C. Preparation of platinum/carbon aerogel nanocomposites using a supercritical deposition method. J. Phys. Chem. B 108 (2004) 7716-7722
31. Zhang Y., Kang D., Saquing C., Aindow M., and Erkey C. Supported platinum nanoparticles by supercritical deposition. Ind. Eng. Chem. Res. 44 (2005) 4161-4164
32. Zhang Y., and Erkey C. Preparation of platinum-nafion-carbon black nanocomposites via a supercritical fluid route as electrocatalysts for proton exchange membrane fuel cells. Ind. Eng. Chem. Res. 44 (2005) 5312-5317
33. Zhang Y., Kang D., Aindow M., and Erkey C. Preparation and characterization of ruthenium/carbon aerogel nanocomposites via a supercritical fluid route. J. Phys. Chem. B 109 (2005) 2617-2624
34. 3 catalysts prepared by supercritical deposition. Catal. Today 99 (2005) 365-373
35. Tavana A., Chang J., Randolph A.D., and Rodriguez N. Scanning of cosolvents for supercritical fluids solubilization of organics. AIChE J. 35 (1989) 645-648
36. Sun Z., Liu Z., Han B., Miao S., Miao Z., and An G. Decoration carbon nanotubes with Pd and Ru nanocrystals via an inorganic reaction route in supercritical carbon dioxide-methanol solution. J. Coll. Int. Sci. 304 (2006) 323-328
37. Ryoo R., and Jun S. Improvement of hydrothermal stability of MCM-41 using salt effects during the crystallization process. J. Phys. Chem. B 101 (1997) 317
38. Warzinski R.P. Supercritical-fluid solubilization of catalyst precursors: the solubility and phase behavior of molybdenum hexacarbonyl in supercritical carbon dioxide and application to the direct liquefaction of coal. J. Supercrit. Fluids 5 (1992) 60-71
39. 3. J. Catal. 61 (1980) 523-527
40. Lanure-Meille V., Schulz E., Lemaire M., and Vrinat M. Effect of experimental parameters on the relative reactivity of dibenzothiophene and 4-methyldibenzothiophene. Appl. Catal. A 131 (1995) 143-157
41. Sie S.T. Miniaturization of hydroprocessing catalyst testing systems: theory and practice. AIChE J. 42 (1996) 3498-3507
42. Bej S.K., Dabral R.P., Gupta P.C., Mittal K.K., Sen G.S., Kapoor V.K., and Dalai A.K. Studies on the performance of a microscale trickle bed reactor using different sizes of diluent. Energy Fuel 1 (2000) 701-705
43. Zepeda T.A., Pawelec B., Fierro J.L.G., and Halachev T. Effect of Ti on the catalytic properties of CoMo/Ti(x)-HMS catalysts in the reaction of hydrodesulfurization of 4-ethyl-6-methyl dibenzothiophene. J. Catal. 242 (2006) 254-269
44. Zepeda T.A., Halachev T., Pawelec B., Nava R., Klimova T., Fuentes G.A., and Fierro J.L.G. Hydrodesulfurization of dibenzothiophene over CoMo/HMS and CoMo/Ti-HMS catalysts. Catal. Commun. 7 (2006) 33-41
45. Franke O., Rathousky J., Schultz-Ekloff G., and Zukal A. Synthesis of MCM-41 mesoporous molecular sieves. Stud. Surf. Sci. Catal. 91 (1995) 309-318
46. Zepeda T.A., Fierro J.L.G., Pawelec B., Klimova T., Fuentes G.A., and Halachev T. Synthesis and characterization of Ti-HMS and CoMo/Ti-HMS oxide materials with varying Ti content. Chem. Mater. 17 (2005) 4062-4473
47. Noronha F.B., Baldanza M.A.S., and Schmal M. CO and NO adsorption on alumina-Pd-Mo catalysts: effect of the precursor salts. J. Catal. 188 (1999) 270-280
48. 3 catalysts for the oxidative dehydrogenation of propane: effect of Mo loading. Appl. Catal. A-GEN. 207 (2001) 421-431
49. 2 catalysts. Appl. Catal. A-GEN. 223 (2002) 195-203
50. Chary K.V.R., Reddy K.R., and Kumar C.P. Dispersion and reactivity of molybdenum oxide catalysts supported on titania. Catal. Commun. 2 (2001) 277-284
51. Herrera J.E., Balzano L., Borgna A., Alvarez W.E., and Resasco D.E. Relationship between the structure/composition of Co-Mo catalysts and their ability to produce single-walled carbon nanotubes by CO disproportionation. J. Catal. 204 (2001) 129-145
52. Li X., Wang A., Sun Z., Li C., Ren J., Zhao B., Wang Y., Chen Y., and Hu Y. Effect of surface proton exchange on hydrodesulfurization performance of MCM-41-supported catalysts. Appl. Catal. A-GEN. 254 (2003) 319-326
53. Wang A., Wang Y., Kabe T., Chen Y., Ishihara A., Qian W., and Yao P. Hydrodesulfurization of dibenzothiophene over siliceous MCM-41-supported catalysts: II. Sulfided Ni-Mo catalysts. J. Catal. 210 (2002) 319-327
54. 3 catalysts and relation to gas-phase basicity. J. Catal. 97 (1986) 52-58
55. Robinson W.R.A.M., van Veen J.A.R., de Beer V.H.J., and van Santen R.A. Development of deep hydrodesulfurization catalysts: II. NiW, Pt and Pd catalysts tested with (substituted) dibenzothiophene. Fuel Process Technol. 61 (1999) 103-116
56. Kanda Y., Kobayashi T., Uemichi Y., Namba S., and Sugioka M. Effect of aluminum modification on catalytic performance of Pt supported on MCM-41 for thiophene hydrodesulfurization. Appl. Catal. A-GEN. 308 (2006) 111-118
57. Landau M.V., Berger D., and Herskowitz M. Hydrodesulfurization of methyl-substituted dibenzothiophenes: fundamental study of routes to deep desulfurization. J. Catal. 159 (1996) 236-245
58. Ho T.C., and Sobel J.E. Kinetics of dibenzothiophene hydrodesulfurization. J. Catal. 128 (1991) 581-584
59. Jongpatiwut S., Li Z., Resasco D.E., Alvarez W.E., Sughrue E.L., and Dodwell G.W. Competitive hydrogenation of poly-aromatic hydrocarbons on sulfur-resistant bimetallic Pt-Pd catalysts. Appl. Catal. A 262 (2004) 241-253