Modelling the relationship between product quality and process characteristics in process industry: An application

International Journal of Productivity and Quality Management

Volumn 4, Issue 4, 2009, Pages 461-475

  Kuruüzüm, Orhan ^a   Akyüz, Gokhan ^a  

^a AKDENIZ UNIVERSITY   (Turkey)

Author keywords

Goal programming; GP; Process analysis; Process industry; Product quality

Indexed keywords

EID: 65449130478     PISSN: 17466474     EISSN: 17466482     Source Type: Journal    
DOI: 10.1504/IJPQM.2009.024222     Document Type: Article

References (54)

1. Aizenchtadt, E., Ingman, D. and Friedler, E. (2008) 'Quality control of wastewater treatment: A new approach', European Journal of Operational Research, Vol. 189, No. 2, pp.445-458.
2. Akyüz, G. (2006) 'A modeling approach for performance measurement and improvement in process manufacturing: An application', PhD thesis, Akdeniz University, Antalya, Türkiye.
3. Aquilano, N.J., Chase, R.B. and Davis, M.M. (1995) Fundamentals of Operations Management, Irwin Inc., Chicago.
4. Ashayeri, J., Teelen, A. and Selen, W. (1996) 'Computer-integrated manufacturing in the chemical industry', Production and Inventory Management Journal, First Quarter, Vol. 37, No. 1, pp.52-57.
5. Ballestero, E. (2005) 'Using stochastic goal programming: Some applications to management and a case of industrial production', Infor., Vol. 43, No. 2, pp.63-77.
6. Biagiola, S. and Figueroa, J.L. (2004) 'Application of state estimation based NMPC to an unstable nonlinear process', Chemical Engineering Science, Vol. 59, No. 21, pp.4601-4612.
7. Bravi, E., Perretti, G., Montonari, L., Favati, F. and Fantozzi, P. (2007) 'Supercritical fluid extraction for quality control in beer industry', The Journal of Supercritical Fluids, Vol. 42, No. 3, pp.342-346.
8. Chase, R.B., Jacobs, F.R. and Aquilano, N.J. (2004) Operations Management for Competitive Advantage, McGraw-Hill, New York.
9. Dennis, D. and Meredith, J. (2000) 'An empirical analysis of process industry transformation systems', Management Science, Vol. 46, No. 8, pp.1085-1099.
10. Dyson, R.G. (Ed.) (1990) Strategic Planning: Models and Analytical Techniques, Wiley, New York.
11. Fiet, D.J. (2006) 'Best of the batch', IET Manufacturing Engineer, Vol. 85, No. 4, pp.32-37.
12. Fine, C.H., Golany, B. and Naseraldin, H. (2005) 'Modeling tradeoffs in three dimensional concurrent engineering: A goal programming approach', Journal of Operations Management, Vol. 23, Nos. 3-4, pp.389-403.
13. Govindaluri, S.M. and Cho, R. (2007) 'Robust design modeling with correlated quality characteristics using a multicriteria decision framework', International Journal of Advanced Manufacturing Technology, Vol. 32, Nos. 5-6, pp.423-433.
14. Güntzer, U., Müller, R., Müller, S. and Schimkat, R-D. (2007) 'Retrieval for decision support resources by structured models', Decision Support Systems, Vol. 43, No. 4, pp.1117-1132.
15. Hahn, J. and Edgar, T.F. (2002) 'An improved method for nonlinear model reduction using balancing of empirical gramians', Computers and Chemical Engineering, Vol. 26, No. 10, pp.1379-1397.
16. Hawkins, D.M. (1993) 'Regression adjustment for variables in multivariate quality control', Journal of Quality Technology, Vol. 25, No. 3, pp.170-182.
17. Ignizio, J.P. (1979) Goal Programming and Extensions, Lexington Books, Massachusetts.
18. Ignizio, J.P. (1980) Advances and Applications in Goal Programming The Pennsylvania State University, Pennsylvania.
19. Jämsä-Jounela, S-L. (2007) 'Future trends in process automation', Annual Reviews in Control, Vol. 31, No. 2, pp.211-220.
20. Jones, D.F., Mirrazavi, S.K. and Tamiz, M. (2002) 'Multi-objective meta-heuristics: An overview of the current state-of-the-art', European Journal of Operational Research, Vol. 137, No. 1, pp.1-9.
21. Kano, M. and Nakagawa, Y. (2008) 'Data-based process monitoring, process control, and quality improvement: Recent development and applications in steel industry', Computers and Chemical Engineering, Vol. 32, Nos. 1-2, pp.12-24.
22. Kano, M., Hasebe, S., Hashimoto, I. and Ohno, H. (2004) 'Evolution of multivariate statistical process control: Application of independent component analysis and external analysis', Computers and Chemical Engineering, Vol. 28, Nos. 6-7, pp.1157-1166.
23. Kazemzadeh, R.B., Bashiri, M., Atkinson, A.C. and Noorossana, R. (2008) 'A general framework for multiresponse optimization problems based on goal programming', European Journal of Operational Research, Vol. 189, No. 2, pp.421-429.
24. Ketokivi, M. and Jokinen, M. (2006) 'Strategy, uncertainty and the focused factory in international process manufacturing', Journal of Operations Management, Vol. 24, No. 3, pp.250-270.
25. Kim, C.N., Yang, K.H. and Kim, J. (2008) 'Human decision-making behavior and modeling effects', Decision Support Systems, Vol. 45, No. 3, pp.517-527.
26. Kim, D., Kim, J. and Moon, I. (2006) 'Integrated of accident scenario generation and multiobjective optimization for safety-cost decision making in chemical process', Journal of Loss Prevention in the Process Industries, Vol. 19, No. 6, pp.705-713.
27. Kobayashi, N., Kaneda, H., Kuroda, H., Watari, J., Kurihara, T. and Shinotsuka, K. (2000) 'Behavior of mono-, di-, and trihydroxyoctadecenoic acids during mashing and methods of controlling their production', Journal of Bioscience and Bioengineering, Vol. 90, No. 1, pp.69-73.
28. Koroneos, C., Roumbas, G., Gabari, Z., Papgiannidou, E. and Moussiopoulos, N. (2005) 'Life cycle assessment of beer production in Greece', Journal of Cleaner Production, Vol. 13, No. 4, pp.433-439.
29. Krajewski, L.J. and Ritzman, L.P. (1996) Operations Management, Addison-Wesley Pub. Co., New York.
30. Kuruüzüm, O. (1986) 'An approach to process control problem and its an application', PhD thesis, Istanbul Technical University, Istanbul, Türkiye.
31. Kwak, N.K. and Lee, C. (1998) 'A multicriteria decision-making approach to university resource allocations and information infrastructure planning', European Journal of Operational Research, Vol. 110, No. 2, pp.234-242.
32. Lamghabbar, A., Yacout, S. and Ouali, S. (2004) 'Concurrent optimization of design and manufacturing stages of product development', International Journal of Production Research, Vol. 42, No. 1, pp.4495-4512.
33. Landryová, L. and Irgens, C. (2006) 'Process knowledge generation and knowledge management to support product quality in the process industry by supervisory control and data acquisition (SCADA) open systems', Production Planning & Control, Vol. 17, No. 2, pp.94-98.
34. Lane, S., Martin, E.B., Morris, A.J. and Gower, P. (2003) 'Application of exponentially weighted principal component analysis for the monitoring of a polymer film manufacturing process', Transactions of the Institute of Measurement and Control, Vol. 25, No. 1, pp.17-35.
35. Lee, J.H., Natarajan, S. and Lee, K.S. (2001) 'A model-based predictive control approach to repetitive control of continuous process with periodic operations', Journal of Process Control, Vol. 11, No. 2, pp.195-207.
36. Leung, S.C.H., Wu, Y. and Lai, K.K. (2003) 'Multi-site aggregate production planning with multiple objectives: A goal programming approach', Production Planning & Control, Vol. 14, No. 5, pp.425-436.
37. Levi, K. (1989) 'Expert systems should be more accurate than human experts: Evaluation procedures from human judgement and decision making', IEEE Transactions on Systems, Man and Cybernetics, Vol. 9, No. 3, pp.647-657.
38. Martin, E.B., Morris, A.J. and Kiparissides, C. (1999) 'Manufacturing performance enhancement through multivariate statistical process control', Annual Reviews in Control, Vol. 23, pp.35-44.
39. Meredith, J.R. (1992) The Management of Operations, John Wiley, New York.
40. Nagarur, N., Vrat, P. and Duongsuwan, W. (1997) 'Production planning and scheduling for injection moulding of pipe fittings: A case study', International Journal of Production Economics, Vol. 53, No. 2, pp.157-170.
41. Nepal, B., Monplaisir, L. and Singh, N. (2006) 'A methodology for integrating design for quality in modular product design', Journal of Engineering Design, Vol. 17, No. 5, pp.387-409.
42. Nolf, R. (1984) Technical Advices for Beer Manufacturing, The Institution of TEKEL, Istanbul, Turkey.
43. Papendreou, V. and Shang, Z. (2008) 'A multi-criteria optimization approach for design of sustainable utility systems', Computers and Chemical Engineering, Vol. 32, No. 7, pp.1589-1602.
44. Pati, R.K., Vrat, P. and Kumar, P. (2008) 'A goal programming model for paper recycling systems', Omega, Vol. 36, No. 3, pp.405-417.
45. Power, D.J. and Kaparthi, S. (2002) 'Building web-based decision support systems', Studies in Informatics and Control, Vol. 11, No. 4, pp.291-302.
46. Russell, R.S. and Taylor, B.V., III (1998) Operations Management, Prentice Hall Inc., NJ.
47. Sandrock, C., Vaal, P. and Weightman, D. (2006) 'Performance comparison of controllers acting on a batch pulp digester using Monte Carlo modelling', Control Engineering Practice, Vol. 14, No. 8, pp.949-958.
48. Sengupta, S. (1981) 'Goal programming approach to a type of quality control problem', Journal of Operational Research Society, Vol. 32, pp.321-323.
49. Singh, R. and Gilbreath, G. (2002) 'A real-time information system for multivariate statistical process control', International Journal of Production Economics, Vol. 75, Nos. 1-2, pp.161-172.
50. Taylor, S.G., Seward, S.M., Bolander, S.F. and Heard, R.C. (1981) 'Process industry production and inventory planning framework', The Journal of Production and Inventory Management, First Quarter, pp.15-33.
51. Turban, E. and Aronson, J.E. (1998) Decision Support Systems and Intelligent Systems, 5th ed., Prentice Hall, New York.
52. Ulusoy, A. (1974) Methods of Beer Manufacturing, The Institution of TEKEL, Istanbul, Turkey.
53. Ulusoy, A. (1976) Physical and Chemical Durability of Beer, The Institution of TEKEL, Istanbul, Turkey.
54. Wang, G., Huang, S.H. and Dismukes, J.P. (2005) 'Manufacturing supply chain design and evaluation', International Journal of Advanced Manufacturing Technology, Vol. 25, Nos. 1-2, pp.93-100.