Minimum spouting velocity in a spout-fluid bed with a draft tube

Canadian Journal of Chemical Engineering

Volumn 87, Issue 2, 2009, Pages 274-278

  Xu, Jian ^a   Tang, Junli ^a   Wei, Sheng ^a   Bao, Xiaojun ^a  

^a CHINA UNIVERSITY OF PETROLEUM   (China)

Author keywords

Draft tube; Minimum spouting velocity; Spout fluid bed

Indexed keywords

DRAFT TUBE; EXPERIMENTAL DATUM; FLUIDIZING GAS FLOW RATES; MINIMUM SPOUTING VELOCITY; SPOUT NOZZLE DIAMETERS; SPOUT-FLUID BED; VITESSE;

FLUIDIZATION; FLUIDS; HYDRAULIC STRUCTURES; TUBES (COMPONENTS); VELOCITY;

FLUIDIZED BEDS;

EID: 65349190016     PISSN: 00084034     EISSN: None     Source Type: Journal    
DOI: 10.1002/cjce.20145     Document Type: Article

References (23)

1. Arsenijevic, Z. L., Z. B. Grbavcic and R. V. Garic-Grulovic, "Drying of Suspensions in the Draft Tube Spouted Bed," Can. J. Chem. Eng. 82, 450-464 (2004).
2. Berrati, E, J. R. Muir and L. A. Behie, "Solids Circulation in a Spout-Fluid Bed with Draft Tube," Can. J. Chem. Eng. 66, 919-923 (1988).
3. Bi, H. T. T., "A Discussion on Minimum Spout Velocity and Jet Penetration Length," Can. J. Chem. Eng. 82, 4-10 (2004).
4. Epstein, N. and J. R. Grace, "Spouting of Particulate Solids," Chapter 10. In: "Handbook of Powder Science and Technology," 2nd ed., M. E. Fayed and L. Otten, Eds., Van Nostrand Reinhold Co., New York, NY (1997).
5. Follansbee, D. M., J. D. Paccione and L. L. Martin, "Globally Optimal Design and Operation of a Continuous Photocatalytic Advanced Oxidation Process Featuring Moving Bed Adsorption and Draft-Tube Transport," Ind. Eng. Chem. Res. 47, 3591-3600 (2008).
6. Grbavcic, Z. B., D. V. Vukovic, S. D. Jovanovic, R. V. Garic, D. E. Hadzismajlovic, H. Littman and M. H. Morgan, "Fluid Flow Pattern and Solids Circulation Rate in a Liquid Phase Spout-Fluid Bed with Draft Tube," Can. J. Chem. Eng. 70, 895-904 (1992).
7. Ishikura, T., H. Nagashima and M. Ide, "Hydrodynamics of a Spouted Bed with a Porous Draft Tube Containing a Small Amount of Finer Particles," Powder Technol. 131, 56-65 (2003).
8. Littman, H., D. Vukovic, F. Zdanski and Z. Grbavcic, "Pressure Drop and Flowrate Characteristics of a Liquid Phase Spout-Fluid Bed at the Minimum Spout-Fluid Flowrate," Can. J. Chem. Eng. 52, 174-179 (1974).
9. Marmo, L., "Low Temperature Drying of Pomace in Spout and Spout-Fluid Beds," J. Food Eng. 79, 1179-1190 (2007).
10. Mathur, K. B. and N. Epstein, "Spouted Beds," Academic Press, New York, NY (1974).
11. Mathur, K. B. and P. E. Gishler, "A Technique for Contracting Gases with Coarse Solid Particles," AIChE J. 1, 157-164 (1955).
12. Muir, J. R., F. Berrati and L. A. Behie, "Solids Circulation in Spouted and Spout-Fluid Beds with Draft-Tubes," Chem. Eng. Comm. 88, 153-171 (1990).
13. Osorio-Revilla, G., R. Elas-Serrano and T. Gallardo-Veláquez, "Drying of Liquid Feedstocks in a Spout-Fluid-Bed with Draft-Tube Submerged in Inert Solids: Hydrodynamics and Drying Performance," Can. J. Chem. Eng. 82, 142-147 (2004).
14. Park, K. B., J. L. Plawsky, H. Littman and J. D. Paccione, "Mortar Properties Obtained by Dry Premising of Cementitious Materials and Sand In a Spout-Fluid Bed Mixer," Cem. Concr. Res. 36, 728-734 (2006).
15. Saadevandi, B. and R. Turton, "Particle Velocity and Voidage Profiles in a Draft Tube Equipped Spouted-Fluidized Bed Coating Device," Chem. Eng. Comm. 191, 1379-1400 (2004).
16. San Jose, M. J., S. Alvarez, A. Ortiz de Salazar, M. Olazar and J. Bilbao, "Operating Conditions of Conical Spouted Beds with a Draft Tube. Effect of the Diameter of the Draft Tube and of the Height of Entrainment Zone," Ind. Eng. Chem. Res. 46, 2877-2884 (2007).
17. Wang, G., W. Guo, H. Wang, H. Zhang and Z. Zhang, "Hydrodynamics of Draft Tube Spouted Bed with Aeration," J. Chem. Ind. Eng. (China) 50, 637-643 (1999).
18. Wei, W., X. Bao, H. T. T. Bi and C. J. Lim, "Prediction of Minimum Spouting Velocity at Elevated Pressures and Temperatures," Pet. Sci. 3, 82-84 (2006).
19. Xiao, R., M. Zhang, B. Jin and X. Liu, "Solids Circulation Flux and Gas Bypassing in Pressurized Spout-Fluid Bed with a Draft Tube Gasifier," Can. J. Chem. Eng. 80, 800-808 (2002).
20. Yang, W. C. and D. L. Keairns, "Study on the Solid Circulation Rate and Gas Bypassing in Spouted Fluid-Bed with a Draft Tube," Can. J. Chem. Eng. 66, 840-847 (1983).
21. Zhang, M., "Study on the Hydrodynamic Behavior of Spout-Fluid Bed with a Draft Tube," Master's Thesis, Tianjin University, China (2005)".
22. Zhong, W., X. Chen and M. Zhang, "Hydrodynamic Characteristics of Spout-Fluid Bed: Pressure Drop and Minimum Spouting/Spout-Fluidizing Velocity," Chem. Eng. J. 118, 37-46 (2006).
23. Zhong, W., Q. Li, M. Zhang, B. Jin, R. Xiao, Y. Huang and A. Shi, "Spout Characteristics of a Cylindrical Spout-Fluid Bed with Elevated Pressure," Chem. Eng. J. 139, 42-47 (2008).