A discussion on minimum spout velocity and jet penetration length

Canadian Journal of Chemical Engineering

Volumn 82, Issue 1, 2004, Pages 4-10

  Bi, Hsiaotao T ^a  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

Author keywords

Jet penetration length; Minimum spout velocity; Spouted bed

Indexed keywords

CYLINDERS (SHAPES); FLUIDIZED BEDS; GEOMETRY; JETS;

JET VELOCITY; SPOUT VELOCITY;

CHEMICAL ENGINEERING;

FLUIDIZED BED; JET; MECHANICAL PROPERTY; SPOUTED BED; VELOCITY;

CHEMICAL ENGINEERING; CONE BOTTOM CYLINDRICAL SPOUTED BED; CONFERENCE PAPER; CONICAL SPOUTED BED; FLAT BOTTOM SPOUTED BED; FLUIDIZED BED; GEOMETRY; INSTRUMENTATION; MATHEMATICAL ANALYSIS; MATHEMATICAL COMPUTING; MEDICAL INSTRUMENTATION; MINIMUM SPOUT VELOCITY; SPOUTED BED; VELOCITY; VERTICAL UPWARD JET;

EID: 3343005430     PISSN: 00084034     EISSN: None     Source Type: Journal    
DOI: 10.1002/cjce.5450820102     Document Type: Conference Paper

References (30)

1. Bi, H.T., A. Macchi, J. Chaouki and R. Legros, "Minimum Spouting Velocity of Conical Spouted Beds", Can. J. Chem. Eng. 75, 46CM65 (1997)
2. Blake, T.R., "Gas Jets in Fluidized Media, Turbulent Diffusion Flames, and Condensing Vapor Jets in Liquids", Powder Technol. 89, 187-195 (1996).
3. Chen, J.J.J. and Y.W. Lam, "An Analogy Between the Spouted Bed Phenomena and the Bubbling-to-Spray Transition", Can. J. Chem. Eng. 61, 759-762 (1983).
4. Choi, M. and A. Meisen, "Hydrodynamics of Shallow, Conical Spouted Beds", Can. J. Chem. Eng. 70, 916-924 (1992).
5. Fane, A.G. and R.A. Mitchell, "Minimum Spouting Velocity of Scaled-Up Beds", Can. J. Chem. Eng. 62, 437-439 (1984).
6. Filla, M., L. Massimilla and S. Vaccaro, "Gas Jets in Fluidized Beds and Spouts: A Comparison of Experimental Behaviour and Models", Can. J. Chem. Eng. 61, 370-376 (1983).
7. Ghosh, B., "A Study of the Spouted Bed. Part I. A Theoretical Analysis", Indian Chem. Eng. 1, 16-19 (1965).
8. Goltsiker, A.D., PhD dissertation, Lensovet Technology Institute, Leningrad, Russia (1967).
9. Gorshtein, A.E. and I.P. Mukhlenov, "Hydraulic Resistance of a Fluidized Bed in a Cyclone Without a Grate. Critical Gas Rate Corresponding to the Beginning of Jet Formation", Zh. Prikl. Khim. 37, 1887-1893 (1964).
10. Grbavcic, Z.B., D.V. Vukovic, F.K. Zdanski and H. Littman, "Fluid Flow Patter, Minimum Spouting Velocity and Pressure Drop in Spouted Beds", Can. J. Chem. Eng. 54, 33-42 (1976).
11. He, Y.-L., C.J. Lim and J.R. Grace, "Spouted Bed and Spout-Fluid Bed Behaviour in a Column of Diameter 0.91 m", Can. J. Chem. Eng. 70, 848-857 (1992).
12. Jing, S., Q.Y. Hu, J.F. Wang and Y. Jin, "Fluidization of Coarse Particles in Gas-Solid Conical Beds", Chem. Eng. & Processing 39, 379-387 (2000).
13. Kmiec, A. "The Minimum Spouting Velocity in Conical Beds", Can. J. Chem. Eng. 61, 274-280 (1983).
14. Knowlton, T.M., I. Hirsan and C. Sishtla, "The Effect of Bed and Jet Parameters on Vertical Jet Penetration Length in Gas Fluidized Beds", Paper presented at 73rd AIChE Annual Meeting, Chicago, III November 16-20 (1980).
15. Lefroy, G.A. and J.F. Davidson, "The Mechanics of Spouted Beds", Trans. Inst. Chem. Eng. 47, T120-128 (1969).
16. Lim, C.J. and J.R. Grace, "Spouted Bed Hydrodynamics in a 0.91 m Diameter Vessel", Can. J. Chem. Eng. 65, 366-372 (1987).
17. Madonna, L.A. and R.F. Lama, "The Derivation of an Equation for Predicting Minimum Spouting Velocity", AIChE J. 4, 497-498 (1958).
18. Markowski, A. and W. Kaminski, "Hydrodynamic Characteristics of Jet-Spouted Beds", Can. J. Chem. Eng. 61, 377-381 (1983).
19. Mathur, K.B. and P.E. Gishler "A Technique for Contacting Gases with Solid Particles", AIChE J. 1, 157-164 (1955).
20. Mathur, K.B. and N. Epstein, "Spouted Beds", Academic Press, New York, NY (1974).
21. Mukhlenov, I.P. and A.E. Gorshtein, "Investigation of a Spouted Bed", Khim. Prom. 41(6), 443-446 (1965).
22. Nikolaev, A.M. and L.G. Golubev, "Basic Hydrodynamic Characteristics of the Spouting Bed", Izv. Vyssh. Ucheb. Zaved. Khim. Khim. Tekhnol. 7, 855-867 (1964).
23. Olazar, M., M.J. San Jose, A.T. Aguayo, J.M. Arandes and J. Bilbao, "Stable Operation Conditions for Gas-Solid Contact Regimes in Conical Spouted Beds", Ind. Eng. Chem. Res. 31, 1784-1792 (1992).
24. Olazar, M., M.J. San Jose, A.T. Aguayo, J.M. Arandes and J. Bilbao, "Hydrodynamics of Nearly Flat Base Spouted Beds", Chem. Eng. J. 55, 27-37 (1994).
25. Peng, V.M. and L.T. Fan, "Hydrodynamic Characteristics of Fluidization in Liquid-Solid Tapered Beds", Chem. Eng. Sci. 52, 2277-2290 (1995).
26. Pham, Q.T. "Behaviour of a Conical Spouted-Bed Dryer for Animal Blood", Can. J. Chem. Eng. 61, 426-434 (1983).
27. Shi, Y., Y.S. Yu and L.T. Fan, "Incipient Fluidization Condition for a Tapered Fluidized Bed", Ind. & Eng. Chem. Fund. 23, 484-489 (1984).
28. Tsvik, M.Z., M.N. Nabiev, N.U. Rizaev, K.V. Merenkov and V.S. Vyzgo, "The Velocity for External Spouting in the Combined Process for Production of Granulated Fertilizer", Uzb. Khim. Zh. 11(2), 50-59 (1967).
29. Wan-Fyong, F., P.G. Romankov and N.B. Rashkovskaya, "Research on the Hydrodynamics of the Spouting Bed", Zh. Prikl. Khim. (Leningrad) 42, 609-617 (1969).
30. Yang, W.C. and D.L. Keairns, "Design and Operating Parameters for a Fluidized Bed Agglomerating Combustor/Gasifier", Fluidization, J.F. Davidson and D.L. Keairns Eds., Cambridge University Press, Cambridge, England, (1978), pp.208-214.