Drying of suspensions in the draft tube spouted bed

Canadian Journal of Chemical Engineering

Volumn 82, Issue 3, 2004, Pages 450-464

  Arsenijević, Zorana Lj ^a   Grbavcić, Zeljko B ^b   Garić Grulović, Radmila V ^a  

^a Institute for Chemistry   (Serbia)

^b UNIVERSITY OF BELGRADE   (Serbia)

Author keywords

Draft tube; Drying; Inert particles; Model; Spouted bed; Suspension

Indexed keywords

CALCIUM COMPOUNDS; DRYERS (EQUIPMENT); DRYING; FUNGICIDES; LINEAR EQUATIONS; POLYETHYLENES; QUALITY CONTROL; TUBES (COMPONENTS); TURBULENT FLOW;

CALCIUM CARBONATE; DRAFT TUBE SPOUTED BED; POLYETHYLENE PARTICLES;

SUSPENSIONS (COMPONENTS);

CALCIUM CARBONATE; POLYETHYLENE; ZINEB;

DRYER; DRYING; LIQUID-SOLID SEPARATION; SUSPENSION;

ARTICLE; DESICCATION; FLOW RATE; FRICTION; MATHEMATICAL MODEL; PROCESS MODEL; TURBULENT FLOW;

EID: 11244325780     PISSN: 00084034     EISSN: None     Source Type: Journal    
DOI: 10.1002/cjce.5450820305     Document Type: Article

References (37)

1. Benali, M. and M. Amazouz, "Effect of Drying-Aid Agents on Processing of Sticky Materials", Dev. Chem. Eng. Mineral Process 10 (3/4), 1-14 (2002).
2. Bird, R.B., W.E. Stewart and E.N. Lightfoot, "Transport Phenomena", J. Wiley, New York, NY (1960).
3. Clift, R., J.R. Grace and M.E. Weber, "Bubbles, Drop and Particles", Academic Press, New York, NY (1978).
4. Eckert, E.R.G. and R.M. Drake, Jr., "Analysis of Heat and Mass Transfer", McGraw Hill, New York, NY (1972).
5. Epstein, N. and J.R. Grace, "Spouting of Particulate Solids", in "Handbook of Powder Science and Technology", M.E. Fayed and L. Otten, Eds., Van Nostrand Reinhold Co., New York, NY (1984), pp. 507-536.
6. Ergun, S., "Fluid Flow through Packed Columns", Chem. Eng. Prog. 48, 89-94 (1952).
7. Garic, R.V., Z.B. Grbavcic and S.Dj. Jovanovic, "Hydrodynamic Modeling of Vertical Non-Accelerating Gas-Solids Flow", Powder Technol. 84, 65-74 (1995).
8. Grbavcic, Z.B., D.V. Vukovic, R.V. Garic, Dz.E. Hadzismajlovic, S.Dj. Jovanovic, H. Littman and H. Morgan, "A Variational Model for Prediction Fluid-Particle Interphase Drag Coefficient and Particulate Expansion of Fluidized and Sedimenting Beds", Powder Technol. 68, 199-211 (1991).
9. Grbavcic, Z.B., D.V. Vukovic, S.Dj. Jovanovic, R.V. Garic, Dz.E. Hadzismajlovic, H. Littman and M.H. Morgan III, "Fluid Flow Pattern and Solids Circulation Rate in a Liquid Phase Spout-Fluid Bed with Draft Tube", Can. J. Chem. Eng. 70, 895-904 (1992).
10. Grbavcic, Z.B., R.V. Garic, S.Dj. Jovanovic and Lj.S. Rozic, "Hydrodynamic Modeling of Vertical Accelerating Gas-Solids Flow", Powder Technol. 92, 155-161 (1997).
11. Grbavcic, Z.B., Z.Lj. Arsenijevic and F.K. Zdanski, "Drying of Suspensions in Fluidized Bed of Inert Particles", 11th International Drying Symposium Drying'98, Thessaloniki-Halkidiki, Greece, (1998), Proc. Volume C, pp. 2090-2097.
12. Hadzismajlovic, Dz.E., D.S. Povrenovic, Z.B. Grbavcic, D.V. Vukovic and H. Littman, "A Spout-Fluid Bed Drier for Dilute Solutions Containing Solids", in FLUIDIZATION VI, J.R. Grace, L.W. Shemilt and M.A. Bergougnou, Eds., Engineering Foundation, New York, NY pp. 277-283, (1989).
13. Kudra, T., E. Pallai, Z. Bartczak and M. Peter, "Drying of Paste-Like Materials in Screw-Type Spouted-Bed and Spin-Flash Dryers", Drying Technology 7(3), 583-597 (1989).
14. Kudra, T. and A.S. Mujumdar, "Advanced Drying Technologies", Marcel Dekker, New York, NY (2002).
15. Kunii, D. and O. Levenspiel, "Fluidization Engineering", J. Wiley, New York, NY (1969).
16. Lefroy, G.A. and J.F. Davidson, "The Mechanics of Spouted Beds", Trans. Instn. Chem. Eng. 47, T120-T128 (1969).
17. Leung, L.S., "The Ups and Down of Gas-Solids Flow-A Review", in Fluidization, J.R. Grace and J.M. Matsen (eds.), Plenum Press, New York, NY (1980), pp. 25-68.
18. Littman, H., J.Y. Day and M.H. Morgan.III, "A Model for the Evaporation of Water from Large Glass Particles in Pneumatic Transport", Can. J. Chem. Eng. 78, 124-131 (2000).
19. Markowski, A.S., "Drying Characteristics in a Jet-Spouted Bed Dryer", Can. J. Chem. Eng. 70, 938-944 (1992).
20. Masters, K., "Spray Drying Handbook", Halsted Press, New York, NY (1985).
21. Mathur, K.B. and N. Epstein, "Spouted Beds", Academic Press, New York, NY (1974).
22. Mujumdar, A.S., "Drying Technologies of the Future", 10th Int. Congress of Chemical Engineering, Chemical Equipment Design and Automation-CHISA'90, Praha, fmr. Czechoslovakia, (1990), Proc., paper P1.3.
23. Mujumdar, A.S. "Handbook of Industrial Drying", 2nd Edition, A.S. Mujumdar (ed.) Marcel Dekker, New York, NY (1995).
24. Nakamura, K. and C.E. Capes, "Vertical Pneumatic Conveying: A Theoretical Study of Uniform and Annular Flow Models", Can. J. Chem. Eng. 51, 39-46 (1973).
25. Oliveira, I.M. and M.L. Passos, "Simulation of Drying Suspension in a Conical Spouted Bed", Drying Technol. 15(2), 593-604 (1997).
26. Pham, Q.T., "Behavior of a Conical Spouted-Bed Dryer for Animal Blood", Can. J. Chem. Eng. 61, 426-434 (1983).
27. Povrenovic, D.S., "Application of Spout-Fluid Bed Drier in Industrial Production", 11th International Drying Symposium DRYING'98, Thessaloniki-Halkidiki, Greece, (1998), Proc. Volume C, pp. 2065-2071.
28. Povrenovic, D.S., "Drying of High Nutritive Materials in the Spout-Fluid Bed with the Draft Tube", 4th International Symposium for South-East European Countries (SEEC) on Fluidized Beds in Energy Production, Chemical and Process Engineering and Ecology, Thessaloniki, Greece (2003), Proc., 59-64.
29. Ranz, W.E., "Friction and Transfer Coefficients for Single Particles and Packed Beds", Chem. Eng. Prog. 48, 247-253 (1952).
30. Reger, E.O., P.G. Romankov and N.B. Rashkovskaya, "Drying of Paste-like Materials in Spouted Beds with Inert Bodies", Zhurn.Prikl.Khim. 40 (10) 2276 (1967) (in Russian).
31. Schneider, T. and J. Bridgwater, "Drying of Solutions and Suspensions in Spouted Beds", 6th International Drying Symposium IDS'88, Versailles, Paris, France (1988), Proc. pp. OP113-OP117.
32. Schneider, T. and J. Bridgwater, "The Stability of Wet Spouted Beds", Drying Technol. 11(2), 277-302 (1993).
33. Spitzner, P.I. and J.T. Freire, "Analysis of the Effect of Paste on the Behavior of a Spouted Bed with Inerts", Proc. 11th International Drying Symposium DRYING'98, Thessaloniki-Halkidiki, Greece, (1998 a), Proc. Volume C, pp. 1936-1943.
34. Spitzner, P.I. and J.T. Freire, "Evaluation of Models on the Drying of Pastes in Spouted Beds with Inerts", 11th International Drying Symposium DRYING'98, Thessaloniki-Halkidiki, Greece, (1998 b), Proc. Volume C, pp. 2009-2016.
35. Szentmarjay, T. and E. Pallai, "Drying of Suspensions in a Modified Spouted Bed Drier with an Inert Packing", Drying Technol. 7(3), 523-536 (1989).
36. Thorley, B., J.B. Saunby, K.B. Mathur and B.L. Osberg, "An Analysis of Air and Solids Flow in a Spouted Beds", Can. J. Chem. Eng. 37, 184-192 (1959).
37. Tia, S., C. Tangsatitkulchai and P. Dumronglaohapun, "Continuous Drying of Slurry in a Jet Spouted Bed", Drying Tech. 13(8,9), 1825-1840 (1995).