Biomechanical evaluation of two types of short-stemmed hip prostheses compared to the trust plate prosthesis by three-dimensional measurement of micromotions

Clinical Biomechanics

Volumn 24, Issue 5, 2009, Pages 429-434

  Fottner, Andreas ^a   Schmid, Markus ^a   Birkenmaier, Christof ^a   Mazoochian, Farhad ^a   Plitz, Wolfgang ^a   Volkmar, Jansson ^a  

^a LUDWIG MAXIMILIANS UNIVERSITY   (Germany)

Author keywords

Micromotion; Short stemmed; Stemless; Three dimensional; Total hip replacement

Indexed keywords

BIOMECHANICAL EVALUATIONS; BONE SURFACES; BONE-PROSTHESIS INTERFACES; CRITICAL VALUES; IN-VITRO; LOAD TRANSMISSIONS; MICRO MOTIONS; MICROMOTION; OSSEOUS INTEGRATIONS; OSTEOINTEGRATION; PHYSIOLOGICAL LOADS; SHORT-STEMMED; STEMLESS; STRAIN DISTRIBUTIONS; STRESS-SHIELDING; THREE-DIMENSIONAL DEFORMATIONS; THREE-DIMENSIONAL MEASUREMENTS; THRUST PLATE PROSTHESIS; TOTAL HIP REPLACEMENT;

BIOMECHANICS; BONE; DEFORMATION; HIP PROSTHESES; IMPLANTS (SURGICAL); THREE DIMENSIONAL;

PROSTHETICS;

ARTICLE; BIOMECHANICS; BONE DEFORMATION; COMPARATIVE STUDY; COMPOSITE GRAFT; IMPLANTATION; KINEMATICS; PRIORITY JOURNAL; THREE DIMENSIONAL IMAGING; TOTAL HIP PROSTHESIS;

ARTHROPLASTY, REPLACEMENT, HIP; BIOMECHANICS; BONE PLATES; BONE SUBSTITUTES; FEMUR; HUMANS; MATERIALS TESTING; PROSTHESIS DESIGN; PROSTHESIS FAILURE; PROSTHESIS IMPLANTATION; STRESS, MECHANICAL; WEIGHT-BEARING;

EID: 64949196585     PISSN: 02680033     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.clinbiomech.2009.02.007     Document Type: Article

References (31)

1. Bergmann G., Graichen F., and Rohlmann A. Hip joint loading during walking and running, measured in two patients. J. Biomech. 26 8 (1993) 969-990
2. Braun A., Lazovic D., and Zigan R. Modular short-stem prosthesis in total hip arthroplasty: implant positioning and the influence of navigation. Orthopedics 30 Suppl. 10 (2007) S148-S152
3. Britton J.R., Walsh L.A., and Prendergast P.J. Mechanical simulation of muscle loading on the proximal femur: analysis of cemented femoral component migration with and without muscle loading. Clin. Biomech. 18 7 (2003) 637-646
4. Chareancholvanich K., Bourgeault C.A., Schmidt A.H., Gustilo R.B., and Lew W.D. In vitro stability of cemented and cementless femoral stems with compaction. Clin. Orthop. Relat. Res. 394 January (2002) 290-302
5. Cristofolini L., Viceconti M., Cappello A., and Toni A. Mechanical validation of whole bone composite femur models. J. Biomech. 29 4 (1996) 525-535
6. Decking R., Puhl W., Simon U., and Claes L.E. Changes in strain distribution of loaded proximal femora caused by different types of cementless femoral stems. Clin. Biomech. 21 5 (2006) 495-501
7. Fink B., Schneider T., Conrad S., Jaeger M., Protzen M., and Rüther W. The thrust plate prosthesis in patients with aseptic osteonecrosis of the femoral head. Arch. Orthop. Trauma Surg. 122 9-10 (2002) 499-505
8. Fink B., Wessel S., Deuretzbacher G., Protzen M., and Ruther W. Midterm results of "thrust plate" prosthesis. J. Arthroplasty 22 5 (2007) 703-710
9. Gheduzzi S., and Miles A.W. A review of pre-clinical testing of femoral stem subsidence and comparison with clinical data. Proc. Inst. Mech. Eng. H 221 1 (2007) 39-46
10. Görtz W., Nägerl U.V., Nägerl H., and Thomsen M. Spatial micromovements of uncemented femoral components after torsional loads. J. Biomech. Eng. 124 6 (2002) 706-713
11. Goto T., Yasunaga Y., Takahashi K., and Ochi M. Biomechanical analysis and quantitative analysis of bone scintigraphy on thrust plate hip prosthesis. Arch. Orthop. Trauma Surg. 124 6 (2004) 357-362
12. Götze C., Steens W., Vieht V., Poremba C., Claes L., and Sterinbeck J. Primary stability in cementless femoral stems: custom-made versus conventional femoral prosthesis. Clin. Biomech. 17 (2002) 267-273
13. Gulow J., Scholz R., and Freiherr von Salis-Soglio G. Short-stemmed endoprostheses in total hip arthroplasty. Orthopade 36 4 (2007) 353-359
14. Haboush E.J. A new operation for arthroplasty of the hip based on biomechanics, photoelasticity, fast-setting dental acrylic, and other considerations. Bull. Hosp. Jt. Dis. 55 2 (1996) 95-111
15. Heiner A.D., and Brown T.D. Structural properties of a new design of composite replicate femurs and tibias. J. Biomech. 34 6 (2001) 773-781
16. Heller M.O., Bergmann G., Deuretzbacher G., Dürselen L., Pohl M., Claes L., Haas N.P., and Duda G.N. Musculo-skeletal loading conditions at the hip during walking and stair climbing. J. Biomech. 34 7 (2001) 883-893
17. Huggler A.H., and Jacob H.A. A new approach towards hip-prosthesis design. Arch. Orthop. Trauma Surg. 97 2 (1980) 141-144
18. Ishaque B.A., Wienbeck S., and Stürz H. Midterm results and revisions of the thrust plate prosthesis (TPP). Z. Orthop. Ihre Grenzgeb. 142 1 (2004) 25-32
19. Jacob H.A., Bereiter H.H., and Buergi M.L. Design aspects and clinical performance of the thrust plate hip prosthesis. Proc. Inst. Mech. Eng. H 221 1 (2007) 29-37
20. Judet J., and Judet R. The use of an artificial femoral head for arthroplasty of the hip joint. J. Bone Joint Surg. Br. 32 B (1950) 166-173
21. Kärrholm J., Borssen B., Löwenhielm G., and Snorrason F. Does early micromotion of femoral stem prosthesis matter? 4-7-year stereoradio-graphic follow-up of 84 cemented prostheses. J. Bone Joint Surg. Br. 76 6 (1994) 912-917
22. Kassi J.P., Heller M.O., Stoeckle U., Perka C., and Duda G.N. Stair climbing is more critical than walking in pre-clinical assessment of primary stability in cementless THA in vitro. J. Biomech. 38 5 (2005) 1143-1154
23. Learmonth I.D. Conservative hip implants. Curr. Orthop. 19 (2005) 255-262
24. Morrey B.F. Short-stemmed uncemented femoral component for primary hip arthroplasty. Clin. Orthop. Relat. Res. 249 (1989) 169-175
25. Morrey B.F., Adams R.A., and Kessler M. A conservative femoral replacement for total hip arthroplasty. A prospective study. J. Bone Joint Surg. Br. 82 7 (2000) 952-958
26. Pillar R.M., Lee J.M., and Maniatopoulos C. Observations on the effect of movement on bone ingrowth into porous-surface implants. Clin. Orthop. 208 (1986) 108-113
27. Speirs A.D., Slomczykowski M.A., Orr T.E., Siebenrock K., and Nolte L.P. Three-dimensional measurement of cemented femoral stem stability: an in vitro cadaver study. Clin. Biomech. 15 (2000) 248-255
28. Speirs A.D., Heller M.O., Taylor W.R., Duda G.N., and Perka C. Influence of changes in stem positioning on femoral loading after THR using a short-stemmed hip implant. Clin. Biomech. 22 4 (2007) 431-439
29. Steinhauser E., Ellenrieder M., Gruber G., Busch R., Gradinger R., and Mittelmeier W. Influence on load transfer of different femoral neck endoprostheses. Z. Orthop. Ihre Grenzgeb. 144 4 (2006) 386-393
30. Thomsen M.N., Breusch S.J., Aldinger P.R., Görtz W., Lahmer A., Honl M., Birke A., and Nägerl H. Robotically-milled bone cavities: a comparison with hand-broaching in different types of cementless hip stems. Acta Orthop. Scand. 73 4 (2002) 379-385
31. Westphal F.M., Bishop N., Honl M., Hille E., Püschel K., and Morlock M.M. Migration and cyclic motion of a new short-stemmed hip prosthesis - a biomechanical in vitro study. Clin. Biomech. 21 8 (2006) 834-840