Experimental investigation of cyclic and time-dependent deformation of titanium alloy at elevated temperature

International Journal of Plasticity

Volumn 23, Issue 1, 2007, Pages 1-24

  Lissenden, Cliff J ^a   Doraiswamy, Devaraj ^a,b   Arnold, Steven M ^c  

^a The Pennsylvania State University   (United States)

^b Jamestown Engine Plant   (United States)

^c NASA GLENN RESEARCH CENTER   (United States)

Author keywords

A. Stress relaxation; B. Cyclic loading; C. Mechanical testing; Elastic viscoplastic material; Strain ratcheting

Indexed keywords

CYCLIC LOADS; PLASTIC DEFORMATION; STRESS RELAXATION; TENSILE STRESS; TENSILE TESTING; VISCOPLASTICITY;

CYCLIC LOADING; ELASTIC VISCOPLASTIC MATERIALS; STRAIN RATCHETING;

TITANIUM ALLOYS;

EID: 33748900759     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2006.01.006     Document Type: Article

References (54)

1. Anonymous. ASM Alloy Digest Datasheet Timetal 21S. Adv. Mater. Proc. 154 (1998) 38-39
2. Arnold S.M., and Saleeb A.F. On the thermodynamic framework of generalized coupled thermoelastic-viscoplastic-damage modeling. Int. J. Plasticity 10 (1994) 263-278
3. Arnold S.M., Saleeb A.F., Powers L., and Lissenden C.J. High temperature characterization and prediction of Timetal 21S cyclic and cyclic-relaxation deformation behavior using a multimechanism viscoelastoplastic model. In: Khan A.S., and Khoei A.R. (Eds). Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modeling (2005), Neat Press 175-177
4. Atluri S.N. Computational techniques for inelastic stress and fracture analyses. Nucl. Eng. Des. 116 (1989) 329-342
5. Aubin V., Quaegebeur P., and Deallaix S. Cyclic plasticity of a duplex stainless steel under non-proportional loading. Mater. Sci. Eng. A346 (2003) 208-215
6. Bari S., and Hassan T. Kinematic hardening rules in uncoupled modeling for multiaxial ratcheting simulation. Int. J. Plasticity 17 (2001) 885-905
7. Bari S., and Hassan T. An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation. Int. J. Plasticity 18 (2002) 873-894
8. Bodner S.R., and Partom Y. Constitutive equations for elastic-viscoplastic strain-hardening materials. J. Appl. Mech. 42 (1975) 385-389
9. Castelli, M.G., Lerch, B.A., Keller, D.J., 1999. A comparison of deformation behaviors of HIPed foil and sheet titanium alloys. In: HITEMP Review 1999, Advanced High Temperature Engine Materials Technology Project, NASA/CP 1999-208915/VOL2. NASA Glenn Research Center, Cleveland, OH.
10. Chaboche J.L. Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int. J. Plasticity 5 (1989) 247-302
11. Chaboche J.L. On some modifications of kinematic hardening to improve the description of ratcheting effects. Int. J. Plasticity 7 (1991) 661-678
12. Chaboche J.L., and Nouailhas D. Constitutive modeling of ratcheting effects - part I: experimental facts and properties of the classical models. J. Eng. Mater. Technol. 111 (1989) 384-392
13. Chen X., Jiao R., and Kim K.S. Simulation of ratcheting strain to a high number of cycles under biaxial loading. Int. J. Solids Struct. 40 (2003) 7449-7461
14. Chen X., Jiao R., and Kim K.S. On the Ohno-Wang kinematic hardening rules for multiaxial ratcheting modeling of medium carbon steel. Int. J. Plasticity 21 (2005) 161-184
15. Coffin L.F. Thermal stress fatigue. Prod. Eng. June (1957)
16. Dieng L., Abdul-Latif A., Haboussi M., and Cunat C. Cyclic plasticity modeling with distribution of non-linear relaxations approach. Int. J. Plasticity 21 (2005) 353-379
17. Döring R., Hoffmeyer J., Seeger T., and Vormwald M. A plasticity model for calculating stress-strain sequences under multiaxial nonproportional cyclic loading. Comput. Mater. Sci. 28 (2003) 587-596
18. ®21S property data. In: Eylon D., Boyer R.R., and Koss D.A. (Eds). Beta Titanium Alloys in the 1990's (1993), The Mining, Minerals, and Materials Society, Warrendale, USA 397-410
19. Freed A.D., and Walker K.P. Viscoplastic model development with an eye toward characterization. J. Eng. Mater. Technol. 117 (1995) 8-13
20. Grover P.S., and Saxena A. Modelling the effect of creep-fatigue interaction on crack growth. Fatigue Fract. Eng. Mater. Struct. 22 (1999) 111-122
21. Gaudin C., and Feaugas X. Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stress. Acta Mater. 52 (2004) 3097-3110
22. Halford G.R., Lerch B.A., and McGaw M.A. Fatigue, creep fatigue, and thermomechanical fatigue life testing. ASM Handbook. Mechanical Testing and Evaluation vol. 8 (2000), ASM International, Mateials Park, USA 686-716
23. Hassan T., and Kyriakides S. Ratcheting in cyclic plasticity, part I: uniaxial behavior. Int. J. Plasticity 8 (1992) 91-116
24. Hübel H. Basic conditions for material and structural ratcheting. Nucl. Eng. Des. 162 (1996) 55-65
25. Janson J. Damage model of creep-fatigue interaction. Eng. Fract. Mech. 11 (1979) 397-403
26. Jinghong F., Jun H., and Xiangguo Z. Microscopically based constitutive relations for damage mechanics and creep-plasticity interaction. Nucl. Eng. Des. 116 (1989) 307-313
27. Johansson G., Ekh M., and Runesson K. Computational modeling of inelastic large ratcheting strains. Int. J. Plasticity 21 (2005) 955-980
28. Kang G.Z., Ohno N., and Nebu A. Constitutive modeling of strain-range-dependent cyclic hardening. Int. J. Plasticity 19 (2003) 1801-1819
29. Kang G.Z. A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation. Mech. Mater. 36 (2004) 299-312
30. Kang G.Z., Gao Q., and Yang X.J. Uniaxial and multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and visco-plastic constitutive model. Int. J. Non-Linear Mech. 39 (2004) 843-857
31. Kang G., Li Y., and Gao Q. Non-proportionally multiaxial ratcheting of cyclic hardening materials at elevated temperatures: experiments and simulations. Mech. Mater. 37 (2005) 1101-1118
32. Kang G.Z., Li Y.G., Zhang J., Sun Y.F., and Gao Q. Uniaxial ratcheting and failure behaviors of two steels. Theor. Appl. Fract. Mech. 43 (2005) 199-209
33. Kang, G., Kan, Q., Zhang, J., Sun, Y., 2006. Time-dependent ratcheting experiments of SS304. Int. J. Plasticity (published online doi:10.1016/j.ijplas.2005.05.006).
34. Kujawski D., Kallianpur V., and Krempl E. An experimental study of uniaxial creep, cyclic creep and relaxation of AISI 304 stainless steel at room temperature. J. Mech. Phys. Solids 28 (1980) 129-148
35. Kujawski D., and Krempl E. The rate (time)-dependent behavior of Ti-7Al-2Cb-1Ta titanium alloy at room temperature under quasi-static monotonic and cyclic loading. J. Appl. Mech. 48 (1981) 55-63
36. Lemaitre J., and Chaboche J.L. Mechanics of Solid Materials (1990), Cambridge University Press, Cambridge
37. Majors P.S., and Krempl E. A recovery of state formulation for the viscoplasticity theory based on overstress. High Temperature Constitutive Modeling - Theory and Application MD-vol. 26/AMD-vol. 121 (1991), The American Society of Mechanical Engineers, New York 235-250
38. Manomukul A., Dunne F.P.E., Knowles D., and Williams S. Multiaxial creep and cyclic plasticity in nickel-base superalloy C263. Int. J. Plasticity 21 (2005) 1-20
39. Manson, S.S., 1962. Discussion of ASME paper 61-WA-199 by J.F. Tavernelli and L.F. Coffin, J. Basic Eng. (Trans. ASME) 85, 537-541.
40. Manson S.S. Fatigue: a complex subject - some simple approximations. Exp. Mech. 5 (1965) 193-226
41. Mayama T., Sasaki K., and Ishikawa H. Biaxial ratcheting deformation of type 304 stainless steel: effect of memorization of back stress. J. Mech. Eng. Sci. 218C (2004) 901-908
42. Mayama T., and Sasaki K. Investigation of subsequent viscoplastic deformation of austenitic stainless steel subjected to cyclic preloading. Int. J. Plasticity (2006) 10.1016/j.ijplas.2005.03.008
43. Morishita M., and Asada Y. Creep-fatigue interaction: data base analysis and applications. Nucl. Eng. Des. 83 (1984) 367-377
44. Ohno N., and Wang J.-D. Kinematic hardening rules with critical state of dynamic recovery, part I: formulations and basic features for ratcheting behavior. Int. J. Plasticity 9 (1993) 375-390
45. Ruggles M.B., and Krempl E. The influence of test temperature on the ratcheting behavior of type 304 stainless steel. J. Eng. Mater. Technol. 111 (1989) 378-383
46. Saleeb A.F., and Arnold S.M. Specific hardening function definition and characterization of a multimechanism generalized potential-based viscoelastoplasticity model. Int. J. Plasticity 20 (2004) 2111-2142
47. Solimine P.A., and Lissenden C.J. Fatigue of beta titanium alloy at 20, 482, 648 °C. Fatigue Fract. Eng. Mater. Struct. 27 (2004) 943-955
48. Taleb, L., Cailletaud, G., Blaj, L., 2006. Numerical simulation of complex ratcheting tests with a multi-mechanism model type. Int. J. Plasticity (published online doi:10.1016/j.ijplas.2005.05.003).
49. Tong J., Zhan Z.-L., and Vermeulen B. Modelling of cyclic plasticity and viscoplasticity of a nickel-based alloy using Chaboche constitutive equations. Int. J. Fatigue 26 (2004) 829-837
50. Velay V., Bernhart G., and Penazzi L. Cyclic behavior modeling of a tempered martensitic hot work tool steel. Int. J. Plasticity (2006) 10.1016/j.ijplas.2005.03.007
51. Yaguchi M., and Takahashi Y. Ratcheting of viscoplastic material with cyclic softening, part 1: experiments on modified 9Cr-1Mo steel. Int. J. Plasticity 21 (2005) 43-65
52. Yaguchi M., and Takahashi Y. Ratcheting of viscoplastic material with cyclic softening, part 2: application of constitutive models. Int. J. Plasticity 21 (2005) 835-860
53. Zamrik S.Y. Interpretation of axial creep fatigue damage interaction in type 316 stainless steel. J. Pressure Vessel Tech. 112 (1990) 4-19
54. Zhang J., and Jiang Y. An experimental study of inhomogeneous cyclic plastic deformation of 1045 steel under multiaxial cyclic loading. Int. J. Plasticity 21 (2005) 2174-2190