Polycarbonate surface cell's adhesion examination after Nd:YAG laser irradiation

Materials Science and Engineering C

Volumn 29, Issue 4, 2009, Pages 1491-1497

  Ramazani S A , Ahmad ^a   Mousavi, Seyyed Abbas ^a   Seyedjafari, Ehsan ^b   Poursalehi, Reza ^c   Sareh, Shohreh ^d   Silakhori, Kaveh ^e   Poorfatollah, Ali Akbar ^d   Shamkhali, Amir Nasser ^a  

^a SHARIF UNIVERSITY OF TECHNOLOGY   (Iran)

^b UNIVERSITY OF TEHRAN   (Iran)

^c SHAHED UNIVERSITY   (Iran)

^d IRANIAN BLOOD TRANSFUSION ORGANIZATION   (Iran)

^e ATOMIC ENERGY ORGANIZATION OF IRAN   (Iran)

Author keywords

Cell culture; Laser; Polycarbonate; Surface; Treatment

Indexed keywords

ADHESION PROPERTIES; ATR FT-IR; BEAM DIAMETERS; BEFORE AND AFTER; CELL ATTACHMENTS; CONTACT-ANGLE MEASUREMENTS; EFFECT OF PULSE; IRRADIATED FILMS; LASER IRRADIATIONS; LASER TREATMENTS; MELT PROCESS; ND : YAG LASERS; ND: YAG LASER IRRADIATIONS; PHYSICAL CHANGES; POLYCARBONATE FILMS; POLYMER SURFACES; PULSE NUMBERS; SEM; SURFACE CELLS; SURFACE WETTABILITIES; TREATMENT; UV SPECTRUM;

ADHESION; ANGLE MEASUREMENT; CELL ADHESION; CELL CULTURE; CELLS; CONTACT ANGLE; FOURIER TRANSFORM INFRARED SPECTROSCOPY; IRRADIATION; LASER BEAMS; LASERS; NEODYMIUM; PULSED LASER APPLICATIONS; SCANNING ELECTRON MICROSCOPY; SURFACE CHEMISTRY; SURFACE PROPERTIES; SURFACE TREATMENT; TRACE ANALYSIS; ULTRAVIOLET SPECTROSCOPY;

NEODYMIUM LASERS;

EID: 64849106458     PISSN: 09284931     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msec.2008.11.019     Document Type: Article

References (42)

1. Ratner B.D., Hoffman A.S., Schoen F.J., and Lemons J.E. Biomaterials Science: An introduction to Materials in Medicine (1996), Academic Press, San Diego
2. Mittal K.I. Physiochemical Aspects of Polymer Surfaces vol. 2 (1983), Plenum Press, New York
3. Suzuki M., Kishida A., Iwata H., and Ikada Y. Macromolecules 19 (1986) 1804
4. Mirzadeh H., Dadsetan M., and Sharifi-Sanjani N. Journal of Applied Polymer Science 86 (2002) 3191
5. Teoh S.H., Tang Z.G., and Hastings G.W. In: Black J., and Hastings G. (Eds). Handbook of Biomaterial Properties (1998), Chapman & Hall, London
6. Anselem K. Biomaterials 21 (2000) 667
7. Kurella A., and Dahotre N.B. Journal of Biomaterial Application 20 (2005) 5
8. Chu P.K., Chen J.Y., Wang L.P., and Huang N. Materials Science and Engineering: R-Reports 36 (2002) 143
9. van der Wel H., van Vroonhoven F.C.B.M., and Lub J. Polymer 34 (1993) 2065
10. Guzman L., Celva R., Miotello A., Voltolini E., Ferrari F., and Adami M. Surface and Coatings Technology 103-104 (1998) 375
11. Guzman L., Miotello A., Voltolini E., and Adami M. Thin Solid Films 377-378 (2000) 760
12. Seidel C., Kopf H., Gotsmann B., Vieth T., Fuchs H., and Reihs K. Applied Surface Science 150 (1999) 19
13. Adams M.R., and Garton A. Polymer Degradation and Stability 42 (1993) 145
14. Adams M.R., and Garton A. Polymer Degradation and Stability 41 (1993) 265
15. Kemmer H., Grafström S., Neitzert M., Wörtge M., Neumann R., Trautmann C., Vette J., and Angert N. Ultramicroscopy 42-44 (1992) 1345
16. Lub J., van Vroonhoven F.C.B.M., Bruninx E., and Benninghoven A. Polymer 30 (1989) 40
17. Frerichs H., Stricker J., Wesner D.A., and Kreutz E.W. Applied Surface Science 86 (1995) 405
18. Charbonnier M., and Romand M. International Journal of Adhesion & Adhesives 23 (2003) 277
19. Laurens P., Ould Bouali M., Meducin F., and Sadras B. Applied Surface Science 154-155 (2000) 211
20. Baudach S., Bonse J., Kruger J., and Kautek W. Applied Surface Science 154-155 (2000) 555
21. Kruger J., Niino H., and Yabe A. Applied Surface Science 197-198 (2002) 211
22. Viville P., Beauvois S., Lambin G., Lazzaroni R., Brédas J.L., Kolev K., and Laude L. Applied Surface Science 96-98 (1996) 558
23. Zhao F., Cui X., Wang B., and Hou J.G. Applied Surface Science 253 (2006) 2785
24. Bogarets A., Chen Z., Gijbels R., and Vertes A. Spectrochemica Acta Part B 58 (2003) 1867
25. Bubb D.M., Sezer A.O., Harris D., Rezae F., and Kelty S.P. Applied Surface Science 253 (2006) 2386
26. Dadsetan M., Mirzadeh H., Sharifi-Sanjani N., and Daliri M. Journal of Biomedical Materials Research 57 (2001) 183
27. Dadsetan M., Mirzadeh H., and Sharifi-Sanjani N. Journal of Applied Polymer Science 79 (2000) 401
28. Mirzadeh H., and Dadsetan M. Radiation Physics and Chemistry 67 (2003) 381
29. Jang B.N., and Wilkie C.A. Thermochimica Acta 426 (2005) 73
30. Getetovszky Z., Hopp B., Bertoti I., and Boyd I.W. Applied surface science 186 (2002) 85
31. Jang B.N., and Wilkie C.A. Polymer Degradation and Stability 86 (2004) 419
32. Jang B.N., and Wilkie C.A. Thermochimica Acta 433 (2005) 1
33. Katajisto J., Pakkanen T.T., Pakkanen T.A., and Hirva P. Journal of Molecular Structure (Theochem) 634 (2003) 305
34. Tjandraatmadja G.F., Burn L.S., and Jollands M.C. Polymer 78 (2002) 435
35. Nagai N., Matsunobe T., and Imai T. Polymer Degradation and Stability 88 (2005) 224
36. Claude B., Gonon L., Duchet J., Verney V., and Gardette J.L. Polymer Degradation and Stability 83 (2004) 237
37. Orlov A.Y., and Feldman V.I. Polymer 42 (2001) 1987
38. Rivaton A., and Gardette J.-L. Die Angewandte Makromolekulare Chemie 261/262 (1998) 173
39. Hollas J.M. Modern Spectroscopy (2004), Wiley, New York
40. Lee J.H., Jung H.W., Kang I.K., and Lee H.B. Biomaterials 15 (1994) 705
41. Ramani R., and Ranganathaiah C. Polymer Degradation and Stability 69 (2000) 347
42. Ma Z., Mao Z., and Gao C. Colloids and surfaces. B 60 (2007) 137