High-temperature stability of lanthanum orthophosphate (monazite) on silicon carbide at low oxygen partial pressures

Journal of the American Ceramic Society

Volumn 91, Issue 7, 2008, Pages 2290-2297

  Cinibulk, Michael K ^a   Fair, Geoff E ^a   Kerans, Ronald J ^a  

^a AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COATED FIBERS; COATING THICKNESS; ENERGY MINIMIZATIONS; GRAIN SIZES; HIGH STRENGTHS; HIGH-TEMPERATURE STABILITIES; LOW OXYGEN PARTIAL PRESSURES; OXIDATION PRODUCTS; OXYGEN PARTIAL PRESSURES; REACTION BARRIERS; SIC FIBERS; SOLID REACTIONS;

COATINGS; LANTHANUM; LANTHANUM ALLOYS; OXYGEN; PHOSPHATE MINERALS; POSITIVE IONS; SILICON CARBIDE; THICKNESS MEASUREMENT;

PARTIAL PRESSURE;

EID: 64549084970     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2008.02409.x     Document Type: Article

References (53)

1. P. E. D. Morgan and D. B. Marshall, "Ceramic Composites of Monazite and Alumina," J. Am. Ceram. Soc., 78 [6] 1553-63 (1995).
2. P. E. D. Morgan, D. B. Marshall, and R. M. Housley, "High- Temperature Stability of Monazite-Alumina Composites," Mater. Sci. Eng., A195, 215-22 (1995).
3. D.-H. Kuo,W.M.Kriven, and T. J.Mackin, "Control of Interfacial Properties Through Fiber Coatings: Monazite Coatings in Oxide-Oxide Composites," J. Am. Ceram. Soc., 80 [12] 2987-96 (1997).
4. T. A. Parthasarathy, E. Boakye, M. K. Cinibulk, and M. D. Petry, "Fabrication and Testing of Oxide/OxideMicrocomposites with Monazite and Hibonite as Interlayers," J. Am. Ceram. Soc., 82 [12] 3575-83 (1999).
5. 4," J. Eur. Ceram. Soc., 19, 2421-6 (1999).
6. T. A. Parthasarathy, E. E. Boakye, K. A. Keller, and R. S. Hay, "Evaluation of Porous Zirconia-Silica and Monazite Coatings Using Nextel 720 Fiber-Reinforced Blackglass Minicomposites," J. Am. Ceram. Soc., 84 [7] 1526-32 (2001).
7. R. J. Kerans, R. S. Hay, T. A. Parthasarathy, and M. K. Cinibulk, "Interface Design for Oxidation Resistant Ceramic Composites," J. Am. Ceram. Soc., 85 [11] 2599-632 (2002).
8. K. A. Keller, T. Mah, T. A. Parthasarathy, E. E. Boakye, P. Mogilevsky, and M. K. Cinibulk, "Effectiveness of Monazite Coatings in Oxide/Oxide Composites in Extending Life after Long-Term Exposure at High-Temperature," J. Am. Ceram. Soc., 86 [2] 325-32 (2003).
9. P. Y. Lee, M. Imai, and T. Yano, "Fracture Behavior of Monazite-Coated Alumina Fiber-Reinforced Alumina-Matrix Composites at Elevated Temperature," J. Ceram. Soc. Jpn., 112 [12] 628-33 (2004).
10. E. Boakye, R. S. Hay, andM. D. Petry, "Continuous Coating of Oxide Fiber Tows Using Liquid Precursors: Monazite Coatings on Nextel 720," J. Am. Ceram. Soc., 82 [9] 2321-31 (1999).
11. R. S. Hay, E. Boakaye, and M. D. Petry, "Effects of Coating Deposition Temperature on Monazite Coated Fiber," J. Eur. Ceram. Soc., 20 [5] 589-97 (2000).
12. R. S. Hay and E. E. Boakye, "Monazite Coatings on Fibers: I, Effect of Temperature and Alumina-Doping on Coated Fiber Tensile Strength," J. Am. Ceram. Soc., 84 [12] 2783-92 (2001).
13. E. E. Boakye, R. S. Hay, P. Mogilevsky, and L. M. Douglas, "Monazite Coatings on Fibers: II, Coating without Strength Degradation," J. Am. Ceram. Soc., 84 [12] 2793-801 (2001).
14. E. E. Boakye and P. Mogilevsky, "Fiber Strength Retention of Lanthanumand Cerium Monazite-Coated Nextelt 720," J. Am. Ceram. Soc., 87 [2] 314-6 (2004).
15. E. E. Boakye, P. Mogilevsky, and R. S. Hay, "Synthesis of Spherical Rhabdophane Particles," J. Am. Ceram. Soc., 88 [10] 2740-6 (2005).
16. 4) Coating of Ceramic Fiber Tows," J .Am. Ceram. Soc., 91 [1] 17-25 (2008).
17. G. E. Fair, R. S. Hay, and E. E. Boayke, "Precipitation Coating of Monazite on Woven Ceramic Fibers - I. Feasibility," J. Am. Ceram. Soc., 90 [2] 448-55 (2007).
18. G. E. Fair, R. S. Hay, and E. E. Boayke, "Precipitation Coating of Monazite on Woven Ceramic Fibers - II. Effect of Processing Conditions on Coating Morphology and Strength Retention of Nextel 610 and 720 Fibers," J. Am. Ceram. Soc. in press (2008).
19. R. J. Kerans, "The Role of Coating Compliance and Fiber/Matrix Interfacial Topography on Debonding in Ceramic Composites," Scripta Metall. Mater., 32 [4] 505-9 (1995).
20. J. B. Davis, R. S. Hay, D. B. Marshall, and P. E. D. Morgan, "Influence of Interfacial Roughness on Fiber Sliding in Oxide Composites with La-Monazite Interphases," J. Am. Ceram. Soc., 86 [2] 305-16 (2003).
21. R. S. Hay and D. B. Marshall, "Deformation Twinning in Monazite," Acta Mater., 51, 5235-54 (2003).
22. 4 in Water Vapor, Vacuum, and CO Environments, unpublished work.
23. 4 at High Temperatures," J. Eur. Ceram. Soc., 21, 751-7 (2001).
24. S. Zhang, X.Ma, G. Tu, C. Ren, C. Zhang, and C. Li, "Study on Behavior of Carbon Reduction of Monazite Concentrate," J. Rare Earths, 18 [3] 178-81 (2000).
25. J. A. DiCarlo and H. M. Yun, "Non-Oxide (Silicon Carbide) Fibers"; pp. 33- 52 in Handbook of Ceramic Composites, Edited by N. P. Bansal. Kluwer Academic, Boston, MA, 2005.
26. D. M. Wilson and L. R. Visser, "High Performance Oxide Fibers for Metal and Ceramic Composites," Composites A, 32, 1143-53 (2001).
27. F. E. Heredia, J. C. McNulty, F. W. Zok, and A. G. Evans, "Oxidation Embrittlement Probe for Ceramic-Matrix Composites," J. Am. Ceram. Soc., 78 [8] 2097-100 (1995).
28. m Minicomposites with Carbon and Boron Nitride Interphases at Elevated Temperatures in Air," J. Am. Ceram. Soc., 80 [8] 2029-42 (1997).
29. G. N. Morscher, J. Hurst, and D. Brewer, "Intermediate-Temperature Stress Rupture of a Woven Hi-Nicalon, BN-Interphase, SiC-Matrix Composite in Air," J. Am. Ceram. Soc., 83 [6] 1441-9 (2000).
30. G. N. Morscher and J. D. Cawley, "Intermediate Temperature Strength Degradation in SiC/SiC Composites," J. Eur. Ceram. Soc., 22, 2777-87 (2002).
31. E. E. Boakye, P. Mogilevsky, J. T. Welter, R. S. Hay, and R. J. Kerans, "Monazite Coatings on SiC Fibers I: Fiber Strength and Thermal Stability," J. Am. Ceram. Soc., 89 [11] 3475-80 (2006).
32. M. K. Cinibulk, J. R. Welch, and R. S. Hay, "Preparation of Thin Sections of Coated Fibers for Characterization by Transmission Electron Microscopy," J. Am. Ceram. Soc., 79 [9] 2481-4 (1996).
33. M. K. Cinibulk, J. R. Welch, and R. S. Hay, "Transmission Electron Microscopy Specimen Preparation of Ceramic Coatings on Ceramic Fibers," Mater. Res. Soc. Symp. Proc., 480, 3-17 (1997).
34. M. D. Petry, T. Mah, and R. J. Kerans, "Validity of Using Average Diameter for Determination of Tensile Strength and Weibull Modulus of Ceramic Filaments," J. Am. Ceram. Soc., 80 [10] 2741-4 (1997).
35. T. A. Parthasarathy, "Extraction of Weibull Parameters of Fiber Strength From Means and Standard Deviations of Failure Loads and Fiber Diameters," J. Am. Ceram. Soc., 84 [3] 588-92 (2001).
36. R. S. Hay, G. E. Fair, P. Mogilevsky, and E. E. Boakye, "Measurement of Fiber Coating Thickness Variation," Ceram. Eng. Sci. Proc., 26 [2] 11-8 (2005).
37. J. Lipowitz, J. A. Rabe, A. Zangvil, and Y. Xu, "Structure and Properties of Sylramic Silicon Carbide Fiber - A Polycrystalline, Stoichiometric b-SiC Composition," Ceram. Eng. Sci. Proc., 18 [3] 147-57 (1997).
38. R. E. Jones, D. Petrak, J. Rabe, and A. Szweda, "Sylramic SiC Fiber for CMC Reinforcement," J. Nucl. Mater., 283-7, 556-9 (2000).
39. 2 Gas Mixtures," J. Mater. Sci., 37, 1793-800 (2002).
40. T. Shimoo, Y.Morisada, and K. Okamura, "Oxidation Behavior of Si-M-C- O Fibers Under Wide Range of Oxygen Partial Pressures," J. Mater. Sci., 37, 4361-8 (2002).
41. T. Shimoo, K. Okamura, and H. Takeuci, "Effect of Reduced Pressure on Oxidation and Thermal Stability of Polycarbosilane-Derived SiC Fibers," J. Mater. Sci., 38, 4973-9 (2003).
42. J. W. Hinze and H. C. Graham, "The Active Oxidation of Si and SiC in the Viscous Gas-Flow Regime," J. Electrochem. Soc., 123 [7] 1066-73 (1976).
43. S. C. Singhal, "Thermodynamic Analysis of the High-Temperature Stability of Silicon Nitride and Silicon Carbide," Ceram. Int., 2, 123-30 (1976).
44. W. L. Vaughn and H. G. Maahs, "Active-to-Passive Transition in the Oxidation of Silicon Carbide and Silicon Nitride," J. Am. Ceram. Soc., 73 [6] 1540-3 (1990).
45. M. Balat, G. Flamant, G. Male, and G. Pichelin, "Active to Passive Transition in the Oxidation of Silicon Carbide at High Temperature and Low Pressure in Molecular and Atomic Oxygen," J. Mater. Sci., 27, 697-703 (1992).
46. Y. Song and F. W. Smith, "Effects of Low-Pressure Oxidation on the Surface Composition of Single Crystal Silicon Carbide," J. Am. Ceram. Soc., 88 [7] 1864-9 (2005).
47. HSC Chemistry Version 5.1, Espoo, Finland, 2005.
48. S. V. Ushakov, K. B. Helean, and A. Navrotsky, "Thermochemistry of Rare- Earth Orthophosphates," J. Mater. Res., 16, 2623-33 (2001).
49. 4 Series," J. Chem. Thermodyn., 37, 131-9 (2005).
50. D. M. Cupid and H. J. Seifert, "Thermodynamic Calculations and Phase Stabilities in the Y-Si-C-O System," J. Phase Equilib. Diffus., 28 [1] 90-100 (2007).
51. C. V. Thompson, "Grain Growth in Thin Films," Ann. Rev. Mater. Sci., 20, 245-68 (1990).
52. K. T. Miller, F. F. Lange, and D. B. Marshall, "The Instability of Polycrystalline Thin Films: Experiment and Theory," J. Mater. Res., 5 [1] 151-60 (1990).
53. M. N. Rahaman, Ceramic Processing and Sintering. Marcel Dekker, New York, NY, 1995.