A brief history of the filling simulation of injection moulding

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

Volumn 223, Issue 3, 2009, Pages 711-722

  Cardozo, D ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

2.5d models; Filling simulation; Injection moulding; One dimensional models; Three dimensional models

Indexed keywords

2.5D MODELS; DESIGN APPROACHES; FLOW FRONTS; INJECTION MOULDING; KEY TECHNIQUES; MANUFACTURING PROCESS; MASS PRODUCTIONS; MOULDED PARTS; NUMERICAL MODELLING; ONE-DIMENSIONAL MODELS; PART DESIGNS; PRIOR EXPERIENCES; RESEARCH AND DEVELOPMENT; SIMULATION TECHNIQUES; THREE-DIMENSIONAL MODELS;

ONE DIMENSIONAL; PLASTIC PARTS; PRODUCTION ENGINEERING; THREE DIMENSIONAL;

INJECTION MOLDING;

EID: 63449140086     PISSN: 09544062     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544062JMES986     Document Type: Article

References (136)

1. Middleman, S. Fundamentals of polymer processing, 1977 (McGraw-Hill, NewYork).
2. Tadmor, Z. G. C. Principles of polymer processing, 1979 (Wiley, NewYork).
3. Pearson, J. R. A. Mechanics of polymer processing, 1975 (Elsevier, London).
4. Gilmore, G. D. and Spencer, R. S. Role of pressure, temperature, and time in injection molding process. Mod. Plast., 1950, 37(8), 143-151.
5. Spencer, R. S. and Gilmore, G. D. Residual strains in injection molded polystyrene. Mod. Plast., 1950, 28(4), 97-105.
6. Spencer, R. S. and Gilmore, G. D. Equation of state for high polymers. J. Appl. Phys., 1950, 21(9), 523-526.
7. Gilmore, G. D. and Spencer, R. S. Photographic study of polymer cycle in injection molding. Mod. Plast., 1951, 28(8), 117-124.
8. Ballman, R. L. and Toor, H. L. Injection molding: Theological interpretation. Mod. Plast., 1959, 37(1-2), 105-111.
9. Ballman, R. L. and Toor, H. L. Orientation in injection molding. Mod. Plast., 1960, 38(2), 113-122.
10. Ballman, R. L. and Toor, H. L. Predicting mold flow by electronic computer. Mod. Plast., 1960, 38(4), 117-120.
11. Jackson, G. B. and Ballman, R. L. Effect of orientation on physical properties of injection moldings. Soc. Plast. Eng. J., 1960, 16(10), 1147-1152.
12. Pearson, J. R. A. Mechanical principles of polymer melt processing, 1966 (Pergamon, Oxford).
13. Kamal, M. R. and Kenig, S. Injection molding of thermoplastics. 1. Theoretical model. Polym. Eng. Sci., 1972, 12(4), 294-301.
14. Kamal, M. R. and Kenig, S. Injection molding of thermoplastics. 2. Experimental test of model. Polym. Eng. Sci., 1972, 12(4), 302-310.
15. Berger, J. L. and Gogos, C. G. Numerical simulation of cavity filling process with PVC in injection molding. Polym. Eng. Sci., 1973, 13(2), 102-112.
16. Wu, P. C., Huang, C. F., and Gogos, C. G. Simulation of mold-filling process. Polym. Eng. Sci., 1974, 14(3), 223-230.
17. Williams, G. and Lord, H. A. Mold-filling studies for injection molding of thermoplastic materials. 1. Flow of plastic materials in hot-walled and cold-walled circular channels. Polym. Eng. Sci., 1975, 15(8), 553-568.
18. Lord, H. A. and Williams, G. Mold-filling studies for injection molding of thermoplastic materials. 2. Transient flow of plastic materials in cavities of injection-molding dies. Polym. Eng. Sci., 1975, 15(8), 569-582.
19. Harry, D. H. and Parrott, R. G. Numerical simulation of injection mold filling. Polym. Eng. Sci., 1970, 10(4), 209-214.
20. Thienel, P. and Menges, G. Mathematical and experimental-determination of temperature, velocity, and pressure fields in flat molds during filling process in injection-molding of thermoplastics. Polym. Eng. Sci., 1978, 18(4), 314-320.
21. Isayev, A. I. and Hieber, C. A. Toward a viscoelastic modeling of the injection-molding of polymers. Rheol. Acta, 1980, 19(2), 168-182.
22. Mavridis, H., Hrymak, A. N., and Vlachopoulos, J. Mathematical modeling of injection mold filling: a review. Adv. Polym. Technol., 1986, 6(4), 457-466.
23. Mok, S. L., Kwong, C. K., and Lau, W. S. Review of research in the determination of process parameters for plastic injection molding. Adv. Polym. Technol., 1999, 18(3), 225-236.
24. Chen, Z. B. and Turng, L. S. A review of current developments in process and quality control for injection molding. Adv. Polym. Technol., 2005, 24(3), 165-182.
25. Hieber, C. A. Coupled-flow-path method for simulating the injection-molding filling stage. In SPE Annual Technical Conference - ANTEC, 1982, pp. 356-358.
26. Bernhardt, E. C. CAE-computer aided engineering for injection molding, 1983 (Hanser, NewYork).
27. Kim, S.-W. Three-dimensional simulations for the filling stage of the polymer injection molding process using the finite element method, 2005, p. 132 (University of Wisconsin-Madison, Madison).
28. Richards, S. Hele shaw flows with a free boundary produced by injection of fluid into a narrow channel. J. Fluid Mech., 1972, 56(DEC28), 609-618.
29. White, J. L. Fluid mechanical analysis of injection mold filling. Polym. Eng. Sci., 1975, 15(1), 44-50.
30. Kamal, M. R., Kuo, Y., and Doan, P. H. Injection molding behavior of thermoplastics in thin rectangular cavities. Polym. Eng. Sci., 1975, 15(12), 863-868.
31. Kuo, Y. and Kamal, M. R. Fluid-mechanics and heat-transfer of injection mold filling of thermoplastic materials. Aiche J., 1976, 22(4), 661-669.
32. Broyer, E., Gutfinger, C., and Tadmor, Z. Theoretical model for cavity filling process in injection molding. Trans. Soc. Rheol., 1975, 19(3), 423-444.
33. Broyer, E.,Tadmor, Z., and Gutfinge. C. Filling of a rectangular channel with a Newtonian fluid. Isr. J. Technol., 1973, 11(4), 189-193.
34. Krueger, W. L. and Tadmor, Z. Injection-molding into a rectangular cavity with inserts. Polym. Eng. Sci., 1980, 20(9), 426-431.
35. Tadmor, Z., Broyer, E., and Gutfinge. C. Flow analysis network (FAN) - method for solving flow problems in polymer processing. Polym. Eng. Sci., 1974, 14(11), 660-665.
36. Hieber, C. A. and Shen, S. F. Flow analysis of the non-isothermal 2-dimensional filling process in injection-molding. Isr. J. Technol., 1978, 16(5-6), 248-254.
37. Hieber, C. A. and Shen, S. F. A finite-element-finite- difference simulation of the injection-molding filling process. J. Non-Newton. Fluid Mech., 1980, 7(1), 1-32.
38. Zhou, H. M., Zhang, Y. S., and Li, D. Q. An improved approach to filling simulation for 3-D surface models. Mod. Plast., 2001, 78(7), 71-73.
39. Shen, S. F. Simulation of polymeric flows in the injection-molding process. Int. J. Numer. Methods Fluids, 1984, 4(2), 171-183.
40. Wang, V. W., Hieber, C. A., and Wang, K. K. Dynamic simulation and graphics for the injection-molding of 3-dimensional thin parts. J. Polym. Eng., 1986, 7(1), 21-45.
41. Isayev, A. I. Injection and compression molding fundamentals, 1987 (Marcel Dekker, NewYork).
42. Bernhardt, E. C. Computer aided engineering for polymer processing, 1987 (Hanser, NewYork).
43. Kennedy, P. Flow analysis of injection molds, 1995 (Hanser, NewYork).
44. Tucker, C. L. Computer modeling for polymer processing, 1995 (Hanser, NewYork).
45. Chiang, H. H., Hieber, C. A., and Wang, K. K. A unified simulation of the filling and postfilling stages in injection-molding. 1: Formulation. Polym. Eng. Sci., 1991, 31(2), 116-124.
46. Chiang, H. H., Hieber, C. A., and Wang, K. K. A unified simulation of the filling and postfilling stages in injection-molding. 2: Experimental-verification. Polym. Eng. Sci., 1991, 31(2), 125-139.
47. Himasekhar, K., Lottey, J., and Wang, K. K. CAE of mold cooling in injection-molding using a 3-dimensional numerical-simulation. Trans. ASME, J. Eng. Ind., 1992, 114(2), 213-221.
48. Chung, S. T. and Kwon, T. H. Numerical-simulation of fiber orientation in injection-molding of short-fiber-reinforced thermoplastics. Polym. Eng. Sci., 1995, 35(7), 604-618.
49. Baaijens, F. P. T. Calculation of residual-stresses in injection molded products. Rheol. Acta, 1991, 30(3), 284-299.
50. Zoetelief, W. F., Douven, L. F. A., and Housz, A. J. I. Residual thermal stresses in injection molded products. Polym. Eng. Sci., 1996, 36(14), 1886-1896.
51. Chiang, H. H., Himasekhar, K., Santhanam, N., and Wang, K. K. Integrated simulation of fluid-flow and heat-transfer in injection-molding for the prediction of shrinkage and warpage. Trans. ASME, J. Eng. Mater. Technol., 1993, 115(1), 37-47.
52. Kabanemi, K. K., Vaillancourt, H., Wang, H., and Salloum, G. Residual stresses, shrinkage, and warpage of complex injection molded products: numerical simulation and experimental validation. Polym. Eng. Sci., 1998, 38(1), 21-37.
53. Turng, L. S., Wang, V. W., and Wang, K. K. Numerical-simulation of the coinjection molding process. Trans. ASME, J. Eng. Mater. Technol., 1993, 115(1), 48-53.
54. Turng, L. S. Development and application of CAE technology for the gas-assisted injection-molding process. Adv. Polym. Technol., 1995, 14(1), 1-13.
55. Han, S., Wang, K. K., and Crouthamel, D. L. Wire-sweep study using an industrial semiconductor-chip-encapsulation operation. J. Electron. Packag., 1997, 119(4), 247-254.
56. Smith, D. E., Tortorelli, D. A., and Tucker, C. L. Analysis and sensitivity analysis for polymer injection and compression molding. Comput Methods Appl. Mech. Eng., 1998, 167(3-4), 325-344.
57. Phelan, F. R. Simulation of the injection process in resin transfer molding. Polym. Compos., 1997, 18(4), 460-476.
58. Rezayat, M. Midsurface abstraction from 3D solid models: general theory and applications. Comput.-Aided Des., 1996, 28(11), 905-915.
59. Fischer, A., Smolin, A., and Elber, G. Mid-surfaces of profile-based freeforms for mold design. Trans. ASME, J. Manuf. Sci. Eng., 1999, 121(2), 202-207.
60. Lockett, H. L. and Guenov, M. D. Graph-based feature recognition for injection moulding based on a midsurface approach. Comput.-Aided Des., 2005, 37(2), 251-262.
61. Zhou, H. M. and Li, D. Q. A numerical simulation of the filling stage in injection molding based on a surface model. Adv. Polym. Technol., 2001, 20(2), 125-131.
62. Zhou, H., Zhang, Y., and Li, D. Injection moulding simulation of filling and post-filling stages based on a three-dimensional surface model. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2001, 215(10), 1459-1463. DOI: 10.1243/0954405011519088.
63. Zhou, H. M. and Li, D. Q. Computer filling simulation of injection molding based on 3D surface model. Polym.-Plast. Technol. Eng., 2002, 41(1), 91-102.
64. Yu, H., Kietzmann, C., Cook, P., Xu, S., Costa, F., and Kennedy, P. A new method for simulation of injection molding. In SPE Annual Technical Conference-ANTEC, 2004, pp. 641-644.
65. Cao, W., Wang, R., and Shen, C.Y. A dual domain method for 3-D flow simulation. Polym.-Plast. Technol. Eng., 2004, 43(5), 1471-1486.
66. Cao, W. and Shen, C. Two solutions for three-dimensional flow simulation of injection molding. In SPE Annual Technical Conference - ANTEC, 2005, pp. 69-73.
67. Jaworski, M. J. Theoretical and experimental comparison of mesh types used in CAE injection molding simulation software, 2003, p. 110 (University of Massachusetts Lowell, Lowell).
68. Osswald,T. A.,Turng, L.-S., and Gramann, P. J. Injection molding handbook, 2002 (Hanser, NewYork).
69. Beaumont, J. P., Nagel, R., and R. S. Successful injection molding: process, design, and simulation, 2002 (Hanser, NewYork).
70. Zhou, H. M., Xi, G. D., and Liu, F. Residual stress simulation of injection molding. J. Mater. Eng. Perform., 2008, 17(3), 422-427.
71. Available from http://www.moldflow.com/.
72. Zhou, H. M. and Li, D. Q. Computer simulation of the filling process in gas-assisted injection molding based on gas-penetration modeling. J. Appl. Polym. Sci., 2003, 90(9), 2377-2384.
73. Cao, W., Shen, C. Y., and Li, H. M. Coupled part and mold temperature simulation for injection molding based on solid geometry. Polym.-Plast. Technol. Eng., 2006, 45(6), 741-749.
74. Li, D. and Zhou, H. Modelling and simulation of residual stress and warpage in injection moulding. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 2004, 218(C5), 521-530. DOI: 10.1243/095440604323052319.
75. Jaworski, M. J. and Yuan, Z. Theoretical and experimental comparison of the four major types of mesh currently used in CAE injection molding simulation software. In SPE Annual Technical Conference-ANTEC, 2003, pp. 642-646.
76. Zhou, H. M. and Li, D. Q. Modelling and prediction of weld line location and properties based on injection moulding simulation. Int. J. Mater. Prod. Technol., 2004, 21(6), 526-538.
77. Zhou, H. M. and Li, D. Q. Computer evaluation of weld lines in injection-molded parts. J. Reinf. Plast. Compos., 2005, 24(3), 315-322.
78. Zhou, H. M. and Li, D. Q. Integrated simulation of the injection molding process with stereolithography molds. Int. J. Adv. Manuf. Technol., 2006, 28(1-2), 53-60.
79. Gao, D. M., Nguyen, K. T., Hetu, J. F., Laroche, D., and Garcia-Rejon, A. Modeling of industrial polymer processes: injection molding and blow molding. Adv. Perform. Mater., 1998, 5(1-2), 43-64.
80. Haagh, G. and Van De Vosse, F. N. Simulation of three-dimensional polymer mould filling processes using a pseudo-concentration method. Int. J. Numer. Methods Fluids, 1998, 28(9), 1355-1369.
81. Hetu, J. F., Gao, D. M., Garcia-Rejon, A., and Salloum, G. 3D finite element method for the simulation of the filling stage in injection molding. Polym. Eng. Sci., 1998, 38(2), 223-236.
82. Pichelin, E. and Coupez, T. Finite element solution of the 3D mold filling problem for viscous incompressible fluid. Comput Methods Appl. Mech. Eng., 1998, 163(1-4), 359-371.
83. Han, R. H., Shi, L. H., and Gupta, M. Three-dimensional simulation of microchip encapsulation process. Polym. Eng. Sci., 2000, 40(3), 776-785.
84. Haagh, G., Peters, G. W. M., Van de Vosse, F. N., and Meijer, H. E. H. A 3-D finite element model for gas-assisted injection molding: simulations and experiments. Polym. Eng. Sci., 2001, 41(3), 449-465.
85. Rajupalem, V., Talwar, K., and Friedl, C. Three-dimensional simulation of the injection molding process. In SPE Annual Technical Conference - ANTEC, 1997, pp. 670-673.
86. Talwar, K., Costa, F., Rajupalem, V., Antanovski, L., and Friedl, C. Three-dimensional simulation of plastic injection molding. In SPE Annual Technical Conference - ANTEC, 1998, pp. 562-566.
87. Choi, K.-I. and Koo, B.-H. Analysis of the three dimensional mold-filling process in injection molding. In SPE Annual Technical Conference - ANTEC, 2004, pp. 501-505.
88. Kim, S. W. and Turng, L. S. Three-dimensional numerical simulation of injection molding filling of optical lens and multiscale geometry using finite element method. Polym. Eng. Sci., 2006, 46(9), 1263-1274.
89. Kim, S.-W. and Turng, L.-S. A 3-D numerical study on injection molding filling. In SPE Annual Technical Conference - ANTEC, 2006, pp. 1128-1132.
90. Zhou, H. M., Geng, T., and Li, D. Q. Numerical filling simulation of injection molding based on 3D finite element model. J. Reinf. Plast. Compos., 2005, 24(8), 823-830.
91. Tezduyar, T. E. Stabilized finite-element formulations for incompressible-flow computations. In Advances in applied mechanics, vol. 28, 1992, pp. 1-44 (Academic Press Inc, San Diego).
92. Argyris, J., Laxander, A., and Szimmat, J. Petrov-Galerkin finite-element approach to coupled heat and fluid-flow. Comput. Methods Appl. Mech. Eng., 1992, 94(2), 181-200.
93. Berger, R. C. and Stockstill, R. L. Finite-element model for high-velocity channels. J. Hydraul. Eng. ASCE, 1995, 121(10), 710-716.
94. Ervin, V. J. and Miles, W. W. Approximation of time-dependent viscoelastic fluid flow: SUPG approximation. SIAM J. Numer. Anal., 2003, 41(2), 457-486.
95. Gong, Z. X. and Mujumdar, A. S. Flow and heat transfer in convection-dominated melting in a rectangular cavity heated from below. Int. J. Heat Mass Transf., 1998, 41(17), 2573-2580.
96. Wu, Y. H., Wiwatanapataphee, B., and Yu, J. An enthalpy control volume method for transient mass and heat transport with solidification. Int. J. Comput. Fluid Dyn., 2004, 18(7), 577-584.
97. Hinca, F. and Hetu, J. F. Three-dimensional simulation of multi-material injection molding: application to gas-assisted and co-injection molding. Polym. Eng. Sci., 2003, 43(7), 1415-1427.
98. Yan, B., Zhou, H., and Li, D. Numerical simulation of the filling stage for plastic injection moulding based on the Petrov-Galerkin methods. Proc. IMechE, Part B: J. Engineering Manufacture, 2007, 221(B10), 1573-1577. DOI: 10.1243/09544054JEM823SC.
99. Chang, R. Y. and Yang, W. H. Numerical simulation of mold filling in injection molding using a three-dimensional finite volume approach. Int. J. Numer. Methods Fluids, 2001, 37(2), 125-148.
100. Yang, W.-H., Peng, A., Liu, L., and Hsu, D. C. Parallel true 3D CAE with hybrid meshing flexibity for injection molding. In SPE Annual Technical Conference-ANTEC, 2005, pp. 56-60.
101. Yang, W.-H., Peng, A., Liu, L., Hsu, D. C., and Chang, R.-Y. Integrated numerical simulation of injection molding using true 3D approach. In SPE Annual Technical Conference - ANTEC, 2004, pp. 486-490.
102. Zhou, J. and Turng, L. S. Three-dimensional numerical simulation of injection mold filling with a finite-volume method and parallel computing. Adv. Polym. Technol., 2006, 25(4), 247-258.
103. Chau, S. W. and Lin, Y.W. Three-dimensional simulation of melt filling and gas penetration in gas-assisted injection molding process using a finite volume formulation. J. Polym. Eng., 2006, 26(5), 431-450.
104. Seo, D. and Youn, J. R. Numerical analysis on reaction injection molding of polyurethane foam by using a finite volume method. Polymer, 2005, 46(17), 6482-6493.
105. Seo, D. J., Youn, J. R., and Tucker, C. L. Numerical simulation of mold filling in foam reaction injection molding. Int. J. Numer. Methods Fluids, 2003, 42(10), 1105-1134.
106. Benitez-Rangel, J. P., Dominguez-Gonzalez, A., Herrera-Ruiz, G., and Delgado-Rosas, M. Filling process in injection mold: a review. Polym.-Plast. Technol. Eng, 2007, 46(7), 721-727.
107. Naterer, G. F. Eulerian three-phase formulation with coupled droplet flow and multimode heat transfer. Numer. Heat Transf. B, Fundam., 2003, 43(4), 331-352.
108. Silva, J. B. C. and de Moura, L. F. M. A control-volume finite-element method (CVFEM) for unsteady, incompressible, viscous fluid flows. Numer. Heat Transf. B, Fundam., 2001, 40(1), 61-82.
109. Estacio, K. C. and Mangiavacchi, N. Simplified model for mould filling simulations using CVFEM and unstructured meshes. Commun. Numer. Methods Eng., 2007, 23(5), 345-361.
110. Jiang, S. L., Wang, Z. G., Zhou, G. F., and Yang, W. M. An implicit control-volume finite element method and its time step strategies for injection molding simulation. Comput. Chem. Eng., 2007, 31(11), 1407-1418.
111. Koo, B.-H. and Choi, K.-I. Computer simulation of 3D filling and packing process in injection molding. In SPE Annual Technical Conference-ANTEC, 2005, pp. 61-65.
112. Khayat, R. E., Derdouri, A., and Hebert, L. P. A 3-dimensional boundary-element approach to gas-assisted injection-molding. J. Non-Newton. Fluid Mech., 1995, 57(2-3), 253-270.
113. Khayat, R. E., Elsin, W., and Kim, K. An adaptive boundary element approach to transient free surface flow as applied to injection molding. Int. J. Numer. Methods Fluids, 2000, 33(6), 847-868.
114. Khayat, R. E., Plaskos, C., and Genouvrier, D. An adaptive boundary-element approach for 3D transient free surface cavity flow, as applied to polymer processing. Int. J. Numer. Methods Eng., 2001, 50(6), 1347-1368.
115. Feng, Y. T. and Peric, D. A time-adaptive space-time finite element method for incompressible Lagrangian flows with free surfaces: computational issues. Comput. Methods Appl. Mech. Eng., 2000, 190(5-7), 499-518.
116. Muttin, F., Coupez, T., Bellet, M., and Chenot, J. L. Lagrangian finite-element analysis of time-dependent viscous free-surface flow using an automatic remeshing technique - application to metal casting flow. Int. J. Numer. Methods Eng., 1993, 36(12), 2001-2015.
117. Idelsohn, S. R., Onate, E., and Del Pin, F. A Lagrangian meshless finite element method applied to fluid-structure interaction problems. Comput Struct., 2003, 81(8-11), 655-671.
118. Floryan, J. M. and Rasmussen, H. Numerical methods for viscous flows with moving boundaries. Appl. Mech. Rev., 1989, 42(12), 323-340.
119. Ubbink, O. and Issa, R. I. A method for capturing sharp fluid interfaces on arbitrary meshes. J. Comput Phys., 1999, 153(1), 26-50.
120. Hyman, J. M. Numerical-methods for tracking interfaces. Physica D, 1984, 12(1-3), 396-407.
121. Osher, S. and Sethian, J. A. Fronts propagating with curvature-dependent speed - algorithms based on Hamilton-Jacobi formulations. J. Comput. Phys., 1988, 79(1), 12-49.
122. Holm, E. J. and Langtangen, H. P. A unified finite element model for the injection molding process. Comput. Methods Appl. Mech. Eng., 1999, 178(3-4), 413-429.
123. Luoma, J. A. and Voller, V. R. An explicit scheme for tracking the filling front during polymer mold filling. Appl. Math. Model., 2000, 24(8-9), 575-590.
124. Soukane, S. and Trochu, F. Application of the level set method to the simulation of resin transfer molding. Compos. Sci. Technol., 2006, 66(7-8), 1067-1080.
125. Harlow, F. H. and Welch, J. E. Numerical study of large-amplitude free-surface motions. Phys. Fluids, 1966, 9(5), 842-851.
126. Ayad, R. and Rigolot, A. The VOF-G/FEV model for tracking a polymer-air interface in the injection moulding process. J. Mech. Des., 2002, 124(4), 813-821.
127. Geng, T., Li, D. Q., and Zhou, H. M. Three-dimensional finite element method for the filling simulation of injection molding. Eng. Comput., 2006, 21(4), 289-295.
128. Hirt, C. W. and Nichols, B. D. Volume of fluid (VOF) method for the dynamics of free boundaries. J. Comput. Phys., 1981, 39(1), 201-225.
129. Kim, M. S., Park, J. S., and Lee, W. I. A new VOF-based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems. Int. J. Numer. Methods Fluids, 2003, 42(7), 791-812.
130. Zhou, H. M., Yan, B., and Zhang, Y. 3D filling simulation of injection molding based on the PG method. J. Mater. Process. Technol., 2008, 204(1-3), 475-480.
131. Rider, W. J. and Kothe, D. B. Reconstructing volume tracking. J. Comput. Phys., 1998, 141(2), 112-152.
132. Ashgriz, N. and Poo, J. Y. Flair - flux line-segment model for advection and interface reconstruction. J. Comput. Phys., 1991, 93(2), 449-468.
133. Thompson, E. Use of pseudo-concentrations to follow creeping viscous flows during transient analysis. Int. J. Numer. Methods Fluids, 1986, 6(10), 749-761.
134. Bajaj, M., Bhat, P. P., Prakash, J. R., and Pasquali, M. Multiscale simulation of viscoelastic free surface flows. J. Non-Newton. Fluid Mech., 2006, 140(1-3), 87-107.
135. Gaston, L., Kamara, A., and Bellet, M. An arbitrary Lagrangian-Eulerian finite element approach to non-steady state turbulent fluid flow with application to mould filling in casting. Int. J. Numer. Methods Fluids, 2000, 34(4), 341-369.
136. Lewis, R. W., Navti, S. E., and Taylor, C. A mixed Lagrangian-Eulerian approach to modelling fluid flow during mould filling. Int. J. Numer. Methods Fluids, 1997, 25(8), 931-952.