Effects of residual ethanol on the rate and degree of conversion of five experimental resins

Dental Materials

Volumn 25, Issue 5, 2009, Pages 621-628

  Cadenaro, Milena ^a   Breschi, Lorenzo ^a   Rueggeberg, Frederick A ^b   Suchko, Michael ^c   Grodin, Evan ^c   Agee, Kelli ^c   Di Lenarda, Roberto ^a   Tay, Franklin R ^c   Pashley, David H ^c  

^a UNIVERSITY OF TRIESTE   (Italy)

^b AUGUSTA UNIVERSITY   (United States)

^c MEDICAL COLLEGE OF GEORGIA   (United States)

Author keywords

DC; Ethanol; Methacrylate resins; Vapor pressure

Indexed keywords

ADHESIVES; CONCENTRATION (PROCESS); DENTAL MATERIALS; ETHANOL; EVAPORATION; HYDROSTATIC PRESSURE; MIXTURES; POLYMERS; RESINS; VAPOR PRESSURE; VAPORS;

ADHESIVE RESINS; BEFORE AND AFTER; CO MONOMERS; CONCENTRATION OF; DC; DEGREE OF CONVERSIONS; DENTAL ADHESIVES; ETHANOL BLENDS; ETHANOL CONCENTRATIONS; ETHANOL MIXTURES; FRACTIONAL LOSS; LIGHT EXPOSURES; METHACRYLATE RESINS; MOLAR CONCENTRATIONS; NULL HYPOTHESIS; RATE OF POLYMERIZATIONS; RESIN SYSTEMS; SOLVENT EVAPORATIONS;

ORGANIC SOLVENTS;

4 AMINOBENZOIC ACID; ACRYLIC ACID RESIN; ALCOHOL; CAMPHOROQUINONE; RESIN CEMENT; SOLVENT; TERPENE;

ARTICLE; CHEMISTRY; DENTAL BONDING; HARDNESS; PHASE TRANSITION; VOLATILIZATION; WETTABILITY;

4-AMINOBENZOIC ACID; ACRYLIC RESINS; DENTAL BONDING, LIGHT-CURED; ETHANOL; HARDNESS; PHASE TRANSITION; RESIN CEMENTS; SOLVENTS; TERPENES; VOLATILIZATION; WETTABILITY;

EID: 63349085435     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2008.11.005     Document Type: Article

References (36)

1. Cho B., and Dickens S. Effects of acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength. Dent Mater 20 (2004) 107-115
2. Cadenaro M., Breschi L., Antoniolli F., Tay F.R., Di Lenarda R., and Pashley D. Degree of conversion of resin blends in relation to ethanol content and hydrophilicity. Dent Mater 24 (2008) 1194-1200
3. Hashimoto M., Tay F.R., Ito S., Sano H., Kaga M., and Pashley D.H. Permeability of adhesive resin films. J Biomed Mater Res B: Appl Biomater 74B (2005) 699-705
4. Ikeda T., De Munck J., Shirai K., Hikita K., Inoue S., Sano H., et al. Effect of evaporation of primer components on ultimate tensile strengths of primer-adhesive mixture. Dent Mater 21 (2005) 1051-1058
5. Klein-Júnior C.A., Zander-Grande C., Amaral R., Stanislawczuk R., Garcia E.J., Baumhardt-Neto R., et al. Evaporating solvents with warm air-stream: effects on adhesive layer properties and resin-dentin bond strengths. J Dent 36 (2008) 618-625
6. Dickens S.H., and Cho B.-H. Interpretation of bond failure through conversion and residual solvent measurements and Weibull analysis of flexural and microtensile bond strengths of bonding agents. Dent Mater 21 (2005) 354-364
7. Jacobsen T., and Söderholm F.J. Some effects of water on dentin bonding. Dent Mater 11 (1995) 132-136
8. Paul S.J., Leach M., Rueggeberg F.A., and Pashley D.H. Effect of water content on the physical properties of model dentin primer and bonding resins. J Dent 27 (1999) 209-214
9. Ito S., Hashimoto M., Wadgaonkar B., Svizero N., Carvalho R.M., Yiu C., et al. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials 26 (2005) 6449-6459
10. Hosaka K., Tagami J., Nishitani Y., Yoshiyama M., Carrilho M., Tay F.R., et al. Effect of wet versus dry testing on the mechanical properties of hydrophilic primer polymers. Eur J Oral Sci 115 (2007) 1-7
11. Perdigão J., Swift E.J., and Lopes G. Effects of repeated use on bond strength of one-bottle adhesives. Quintessence Int 30 (1999) 19-23
12. Craig R., and Powers J. Restorative dental materials. 11th ed. (2002), St. Louis, Mosby p. 126-53
13. Craig R., and Powers J. Restorative dental materials. 11th ed. (2002), St. Louis, Mosby p. 260-85
14. Ye Q., Wang Y., Williams K., and Spencer P. Characterization of photopolymerization of dental adhesives as a function of light source and irradiance. J Biomed Mater Res B: Appl Biomater 80B (2007) 440-446
15. Pashley E.L., Zhang Y., Lockwood P., Rueggeberg F., and Pashley D.H. Effects of HEMA on water evaporation from water-HEMA mixtures. Dent Mater 14 (1998) 6-10
16. Ruyter I.E., and Svendsen S.A. Remaining methacrylate groups in composite restorative materials. Acta Odontol Scand 36 (1978) 75-82
17. Eliades C.C., Vongiouklakis C.J., and Caputo A.A. Degree of double bond conversion in light-cured composites. Dent Mater 3 (1987) 19-25
18. Rueggeberg F.A., and Craig R. Correlation of parameters used to estimate monomer conversion in a light-cured composite. J Dent Res 67 (1988) 932-937
19. Rueggeberg F.A., Hashinger D.T., and Fairhurst C.W. Calibration of FTIR conversion analysis of contemporary dental resin composites. Dent Mater 6 (1990) 241-249
20. Ye Q., Spencer P., Wang Y., and Misra A. Relationship of solvent to the photopolymerization process, properties, and structure in model dentin adhesives. J Biomed Mater Res 80A (2007) 342-350
21. Sadr A., Shimada Y., and Tagami J. Effects of solvent drying time on microshear bond strength and mechanical properties of two self-etching adhesive systems. Dent Mater 23 (2007) 1114-1119
22. Yiu C.K.Y., Pashley E.L., Hiraishi N., King N.M., Goracci C., Ferrari M., et al. Solvent and water retention in dental adhesive blends after evaporation. Biomaterials 26 (2005) 6863-6872
23. Holmes R.G., Rueggeberg F.A., Callan R.S., Caughman F., Chan D.C.N., Pashley D.H., et al. Effect of solvent type and content on monomer conversion of a model resin system as a thin film. Dent Mater 23 (2007) 1506-1512
24. Fujibayashi K., Ishimaru K., Takahashi N., and Kohno A. Newly developed curing unit using blue light-emitting diodes. Dent Jpn 34 (1998) 49-53
25. Asmussen E., and Peutzfeldt A. Temperature rise induced by some light emitting diode and quartz-tungsten-halogen curing units. Eur J Oral Sci 113 (2005) 96-98
26. Mills R.W., Jandt K.D., and Ashworth S.H. Dental composite depth of cure with halogen and blue light emitting diode technology. Br Dent J 186 (1999) 388-391
27. Nomoto R. Effect of light wavelength on polymerization of light-cured resins. Dent Mater 16 (1997) 60-73
28. Tsai P.C., Meyers I.A., and Walsh L.J. Depth of cure and surface microhardness of composite resin cured with blue LED curing lights. Dental Mater 20 (2004) 364-369
29. Haitz R.H., Craford M.G., and Weissman RH. Light emitting diodes. In: Bass M. (Ed). Handbook of optics. 2nd ed. (1995) 121-129
30. Clinical Research Associates. Resin curing lights, LED. CRA Newslett (2001) 1-2
31. Bala O., Olmez A., and Kalayci S. Effect of LED and halogen light curing on polymerization of resin-based composites. J Oral Rehabil 32 (2005) 134-140
32. Soh M.S., Yap A.U., Yu T., and Shen Z.X. Analysis of the degree of conversion of LED and halogen lights using micro-Raman spectroscopy. Oper Dent 29 September-October (5) (2004) 571-577
33. Wiggins K.M., Hartung M., Althoff O., Wastian C., and Mitra S.B. Curing performance of a new-generation light-emitting diode dental curing unit. J Am Dent Assoc 135 (2004) 1471-1479
34. Nakfoor B., Yaman P., Dennison J., and Herrero A. Effect of a light-emitting diode on composite polymerization shrinkage and hardness. J Esthet Restor Dent 17 (2005) 110-116
35. Breschi L., Cadenaro M., Antoniolli F., Sauro S., Biasotto M., Prati C., et al. Polymerization kinetics of dental adhesives cured with LED: correlation between extent of conversion and permeability. Dent Mater 23 (2007) 1066-1072
36. Cadenaro M., Antoniolli F., Sauro S., Tay F.R., Di Lenarda R., Prati C., et al. Degree of conversion and permeability of dental adhesives. Eur J Oral Sci 113 (2005) 525-530