Evaporating solvents with a warm air-stream: Effects on adhesive layer properties and resin-dentin bond strengths

Journal of Dentistry

Volumn 36, Issue 8, 2008, Pages 618-625

  Klein Júnior, Celso Afonso ^a   Zander Grande, Christiana ^b   Amaral, Roberto ^b   Stanislawczuk, Rodrigo ^b   Garcia, Eugênio José ^b   Baumhardt Neto, Ricardo ^c   Meier, Márcia Margarete ^d   Loguercio, Alessandro Dourado ^b   Reis, Alessandra ^b  

^a UNIVERSIDADE LUTERANA DO BRASIL   (Brazil)

^b STATE UNIVERSITY OF PONTA GROSSA   (Brazil)

^c FEDERAL UNIVERSITY OF RIO GRANDE DO SUL   (Brazil)

^d FGM Dental Products   (Brazil)

Author keywords

Adhesive systems; Bond strength; Degree of conversion; Dentin; Evaporation; Solvent

Indexed keywords

ACETONE; ALCOHOL; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; DENTIN BONDING AGENT; POLYMETHACRYLIC ACID DERIVATIVE; PRIME AND BOND 2.1; SINGLE BOND; SOLVENT; WATER;

AIR; ARTICLE; CHEMISTRY; CLASSIFICATION; COLD; DENTAL BONDING; DENTIN; DESICCATION; HEAT; HUMAN; INFRARED SPECTROSCOPY; MATERIALS TESTING; SCANNING ELECTRON MICROSCOPY; SILVER STAINING; SURFACE PROPERTY; TEMPERATURE; TENSILE STRENGTH; TOOTH DISEASE; ULTRASTRUCTURE;

ACETONE; AIR; BISPHENOL A-GLYCIDYL METHACRYLATE; COLD; DENTAL BONDING; DENTAL LEAKAGE; DENTIN; DENTIN-BONDING AGENTS; DESICCATION; ETHANOL; HEAT; HUMANS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; POLYMETHACRYLIC ACIDS; SILVER STAINING; SOLVENTS; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; SURFACE PROPERTIES; TEMPERATURE; TENSILE STRENGTH; WATER;

EID: 46649105460     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2008.04.014     Document Type: Article

References (37)

1. Van Meerbeek B., De Munck J., Yoshida Y., Inoue S., Vargas M., and Vijay P. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Operative Dentistry 28 (2003) 215-235
2. Tay F.R., and Pashley D.H. Dentin adhesives: have they become too hydrophilic?. Journal of Canadian Dental Association 69 (2003) 724-731
3. Tay F.R., and Pashley D.H. Water treeing-a potential mechanism for degradation of dentin adhesives. American Journal of Dentistry 16 (2003) 6-12
4. Tay F.R., Frankenberger R., Krejci I., Bouillaguet S., Pashley D.H., Carvalho R.M., et al. Single-bottle adhesives behave as permeable membranes after polymerization. I. In vivo evidence. Journal of Dentistry 32 (2004) 611-621
5. Tay F.R., Suh B.I., Pashley D.H., Prati C., Chuang S.F., and Li F. Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part II. Single-bottle, total-etch adhesive. Journal of Adhesive Dentistry 5 (2003) 91-105
6. Suh B.I., Feng L., Pashley D.H., and Tay F.R. Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers. Journal of Adhesive Dentistry 5 (2003) 267-282
7. Tay F.R., Pashley D.H., Suh B.I., Hiraishi N., and Yiu C.H.Y. Water treeing in simplified dentin adhesives-déjã vu?. Operative Dentistry 30 (2005) 561-579
8. De Munck J., Van Meerbeek B., Yoshida Y., Inoue S., Vargas M., Suzuki K., et al. Four-year water degradation of total-etch adhesives bonded to dentin. Journal of Dental Research 82 (2003) 136-140
9. Frankenberger R., Strobel W.O., Lohbauer U., Kramer N., and Petschelt A. The effect of six years of water storage on resin composite bonding to human dentin. Journal of Biomedical Materials Research B: Applied Biomaterials 69 (2004) 25-32
10. Gamborgi G.P., Loguercio A.D., and Reis A. Influence of enamel border and regional variability on durability of resin-dentin bonds. Journal of Dentistry 35 (2007) 371-376
11. Peumans M., Kanumilli P., De Munck J., Van Landuyt K., Lambrechts P., and Van Meerbeek B. Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dental Materials 21 (2005) 864-881
12. De Munck J., Van Landuyt K., Peumans M., Poitevin A., Lambrechts P., Braem M., et al. A critical review of the durability of adhesion to tooth tissue: methods and results. Journal of Dental Research 84 (2005) 118-132
13. El-Din A.K.N., and Abd El-Mohsen M. Effect of changing application times on adhesive systems bond strengths. American Journal of Dentistry 15 (2002) 321-324
14. Hashimoto M., De Munck J., Ito S., Sano H., Kaga M., Oguchi H., et al. In vitro effect of nanoleakage expression on resin-dentin bond strengths analyzed by microtensile bond test, SEM/EDX and TEM. Biomaterials 25 (2004) 5565-5574
15. Cardoso P.C., Loguercio A.D., Vieira L.C., Baratieri L.N., and Reis A. Effect of prolonged application times on resin-dentin bond strengths. Journal of Adhesive Dentistry 7 (2005) 143-149
16. Reis A., Pellizzaro A., Dal-Bianco K., Gomes O.M., Patzlaff R., and Loguercio A.D. Impact of adhesive application on wet and dry long-term resin-dentin bond strengths. Operative Dentistry 32 (2007) 380-387
17. Dal-Bianco K., Pellizzaro A., Patzlaft R., de Oliveira Bauer J.R., Loguercio A.D., and Reis A. Effects of moisture degree and rubbing action on the immediate resin-dentin bond strength. Dental Materials 22 (2006) 1150-1156
18. Reis A., Cardoso P.C., Vieira L.C., Baratieri L.N., Grande R.H., and Loguercio A.D. Effect of prolonged application times on the durability of resin-dentin bonds. Dental Materials 24 (2008) 639-644
19. Cadenaro M., Antoniolli F., Sauro S., Tay F.R., Di Lenarda R., Prati C., et al. Degree of conversion and permeability of dental adhesives. European Journal of Oral Sciences 113 (2005) 525-530
20. Reis A., Loguercio A.D., Azevedo C.L.N., Carvalho R.M., Singer J.M., and Grande R.H.M. Moisture spectrum of demineralized dentin for different solvent-based adhesive system. Journal of Adhesive Dentistry 5 (2003) 183-192
21. Tay F.R., King N.M., Chan K.M., and Pashley D.H. How can nanoleakage occur in self-etching adhesive systems that demineralize and infiltrate simultaneously?. Journal of Adhesive Dentistry 4 (2002) 255-269
22. Van Landuyt K.L., Snauwaert J., De Munck J., Peumans M., Yoshida Y., Poitevin A., et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials 28 (2007) 3757-3785
23. Wang Y., Spencer P., Yao X., and Brenda B. Effect of solvent content on resin hybridization in wet dentin bonding. Journal of Biomedical Materials Research A 82 (2007) 975-983
24. Holmes R.G., Rueggeberg F.A., Callan R.S., Caughman F., Chan D.C.N., Pashley D.H., et al. Effect of solvent type and content on monomer conversion of a model resin system as a thin film. Dental Materials 23 (2007) 1506-1512
25. Paul S.J., Leach M., Rueggeberg F.A., and Pashley D.H. Effect of water content on the physical properties of model dentine primer and bonding resins. Journal of Dentistry 27 (1999) 209-214
26. Cho B.-H., and Dickens S.H. Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength. Dental Materials 20 (2004) 107-115
27. Dickens S.H., and Cho B.H. Interpretation of bond failure through conversion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strength of bonding agents. Dental Materials 21 (2005) 354-364
28. Bae J.H., Cho B.H., Kim J.S., Kim M.S., Lee I.B., Son H.H., et al. Adhesive layer properties as a determinant of dentin bond strength. Journal of Biomedical Materials Research Part B-Applied Biomaterials 74 (2005) 822-828
29. Pashley E.L., Zhang Y., Lockwood P.E., Rueggeberg F.A., and Pashley D.H. Effects of HEMA on water evaporation from water-HEMA mixtures. Dental Materials 14 (1998) 6-10
30. Yiu C.K.Y., Pashley E.L., Hiraishi N., King N.M., Goracci C., Ferrari M., et al. Solvent and water retention in dental adhesives blends after evaporation. Biomaterials 26 (2005) 6863-6872
31. Reis A.F., Oliveira M.T., Giannini M., De Goes M.F., and Rueggeberg F.A. The effect of organic solvents on one-bottle adhesives' bond strength to enamel and dentin. Operative Dentistry 28 (2003) 700-706
32. Nunes T.G., Garcia F.C., Osorio R., Carvalho R., and Toledano M. Polymerization efficacy of simplified adhesive systems studied by NMR and MRI techniques. Dental Materials 22 (2006) 963-972
33. Callister W.D. Materials science and engineering. An introduction. 4th ed. (2000), Wiley Interscience, New York
34. Takahashi A., Sato Y., Uno S., Pereira P.N.R., and Sano H. Effects of mechanical properties of adhesives on bond strength to dentin. Dental Materials 18 (2002) 263-268
35. Reis A., Grandi V., Carlotto L., Bortoli G., Patzlaff R., Accorinte M.L., et al. Effect of smear layer thickness and acidity of self-etching solution on early and long-term bond strength to dentin. Journal of Dentistry 33 (2005) 549-559
36. Tay F.R., Pashley D.H., and Yoshiyama M. Two modes of nanoleakage expression in single-step adhesives. Journal of Dental Research 81 (2002) 472-476
37. Brännström M. A hydrodynamic mechanism in the transmission of the pain producing stimuli through the dentin. In: Anderson D.J. (Ed). Sensory mechanisms in dentine (1963), Pergamon Press, Oxford 73-79