Analysis of the effects of conical indentation variables on the indentation response of elastic-plastic materiais through factorial design of experiment

Journal of Materials Research

Volumn 24, Issue 3, 2009, Pages 1222-1234

  Rodríguez Pulecio, Sara Aida ^a   Moré Fatias, María Cristina ^a   Souza, Roberto Martins ^a  

^a UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

CONICAL INDENTATIONS; DIMENSIONAL ANALYSIS; DIMENSIONLESS VARIABLES; ELASTIC PLASTICS; FACTORIAL DESIGNS; FINITE-ELEMENT MODELING; INDENTATION CURVES; INDENTER; INPUT VARIABLES; UNLOADING CURVES; UNLOADING SLOPES;

MECHANICAL PROPERTIES; PLASMA THEORY; UNLOADING;

VICKERS HARDNESS TESTING;

EID: 63149119160     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2009.0124     Document Type: Article

References (44)

1. Instrumented Indentation Testing, 10th ed., ASM Handbook, Vol. 8, edited by J.L. Hay and G.M. Pharr (ASM, Materials Park, OH, 1990), pp. 232-243.
2. X. Li and B. Bhushan: A review of nanoindentation continuous stiffness measurement technique and its applications. Mater. Charact. 48, 11 (2002).
3. A.C. Fischer-Cripps: A review of analysis methods for sub-micron indentation testing. Vacuum 58, 569 (2000).
4. Y.T. Cheng and C.M. Cheng: Further analysis of indentation loading curves: Effects of tip rounding on mechanical property measurements. J. Mater. Res. 13, 1059 (1998).
5. J.M. Meza, F. Abbes, and M. Troyon: Penetration depth and tip radius dependence on the correction factor in nanoindentation measurements. J. Mater. Res. 23, 725 (2008).
6. Y.T. Cheng and C.M. Cheng: Effects of "sinking in" and "piling up" on estimating the contact area under load in indentation. Philos. Mag. Lett. 78, 115 (1998).
7. Y.T. Cheng and C.M. Cheng: Relationships between hardness, elastic modulus, and the work of indentation. Appl. Phys. Lett. 73, 614 (1998).
8. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh, and S. Suresh: Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater. 49, 3899 (2001).
9. J.L. Bucaille, S. Stauss, E. Felder, and J. Michler: Determination of plastic properties of metals by instrumented indentation using different sharp indenters. Acta Mater. 51, 1663 (2003).
10. Y.T. Cheng and C.M. Cheng: Scaling, dimensional analysis, and indentation measurements Mater. Mater. Sci. Eng., R 44, 91 (2004).
11. Y.T. Cheng and C.M. Cheng: Scaling approach to conical indentation in elastic-plastic solids with work hardening. J. Appl. Phys. 84, 1284 (1998).
12. G.E.P. Box, W.G. Hunter, and J.S. Hunter: Statistics for Experimenters. An Introduction to Design, Data Analysis, and Model Building. 1st ed. (John Wiley, New York, 1978), pp. 117-134.
13. C. Bisch, M. Nadal, F. Teyssandier, M. Bancel, and B. Vallon: Chemical vapor deposition of titanium carbide on WC-Co cemented carbides. Mater. Sci. Eng., A 202, 238 (1995).
14. J.R. Correa, D. Canetti, R. Castillo, J.C Llópiz, and J. Dufour: Influence of the precipitation pH of magnetite in the oxidation process to maghemite. Mater. Res. Bull. 41, 703 (2006).
15. R.L. Perrier, A. Safari, and R.E. Riman: Experimental design applied to a low-temperature synthetic route to crystalline, submicron barium titanate zirconate powder. Mater. Res. Bull. 26, 1067 (1991).
16. M.C.M. Farias, R.M. Souza, A. Sinatora, and D.K. Tanaka: The influence of applied load, sliding velocity and martensitic transformation on the unlubricated sliding wear of austenitic stainless steels. Wear 263, 773 (2007).
17. L.M. Moore, M.D. McKay, and K.S. Campbell: Combined array experiment design. Reliab. Eng. Sys. Safety 91, 1281 (2006).
18. M. Calì, M.G.L. Santarelli, and P. Leone: Computer experimental analysis of the CHP performance of a 100 kWe SOFC field unit by a factorial design. J. Power Sources 156, 400 (2006).
19. N. Jakobsson, D. Karlsson, J.P. Axelsson, G. Zacchi, and B. Nilsson: Using computer simulation to assist in the robustness analysis of an ion-exchange chromatography step. J. Chromatogr., A 1063, 99 (2005).
20. X. Wang and G.A. Dumas: Evaluation of effects of selected factors on inter-vertebral fusion - A simulation study. Med. Eng. Phys. 27, 197 (2005).
21. O. Casals and J. Alcalá: Analytical and experimental resolutions in the duality of mechanical property extractions from instrumented indentation experiments: Comments on "On determination of material parameters from loading and unloading responses in nanoindentation with a single sharp indenter" by L. Wang and S.I. Rokhlin. i J. Mater. Res. 21, 995 (2006)]. J. Mater. Res. 22, 1138 (2007).
22. S.A. Rodriguez, M.C.M. Farias, and R.M. Souza: Analysis of the tip roundness effects on the micro and macroindentation response of elastic-plastic materials. J. Mater. Res. 24, (2009, DOI: 10.1557/JMR.2009.0078).
23. I.N. Sneddon: The relationship between load and penetration in the axisimetric Boussinesq problem for a punch of arbitrary profile. Int. J. Eng. Sci. 3, 47 (1965).
24. H. Hertz and J.R. Angew: On the contact of elastic solids. Math. 92, 156 (1881) (Translated and reprinted in English in Hertz's Miscellaneous Papers, Macmillan, London, 1896).
25. W.C. Oliver and G.M. Pharr: An improved technique for determining hardness and elastic modulus using load and sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).
26. M. Martin and M. Troyon: Fundamental relations used in nanoindentation: Critical examination based on experimental measurements. J. Mater. Res. 17, 2227 (2002).
27. R.B. King: Elastic analysis of some punch problems for a layered medium. Int. J. Solids Struct. 23, 1657 (1987).
28. J.C. Hay, A. Bolshakov, and G.M. Pharr: A critical examination of the fundamental relations used in the analysis of nanoindentation data. J. Mater. Res. 14, 2296 (1999).
29. J.L. Hay and P.J. Wolff: Small correction required when applying the Hertzian contact model to instrumented indentation data. J. Mater. Res. 16, 1280 (2001).
30. J.M. Meza and J. Cruz: Tip roundness effect in mechanical properties measured by instrumented indentation. Sci. Teach. 36, 613 (2007).
31. J.M. Antunes, L.F. Menezes, and J.V. Fernandes: Three-dimensional numerical simulation of Vickers indentation tests. Int. J. Solids Struct. 43, 784 (2006).
32. M. Troyon and L. Huang: Correction factor for contact area in nanoindentation measurements. J. Mater. Res. 20, 610 (2005).
33. M. Troyon and S. Lafaye: About the importance of introducing a correction factor in the Sneddon relationship for nanoindentation measurements. Philos. Mag. 86, 5299 (2006).
34. Y.P. Cao, M. Dao, and J. Lu: A precise correcting method for the study of the superhard material using nanoindentation tests. J. Mater. Res. 22, 1255 (2007).
35. M. Mata and J. Alcalá: The role of friction on sharp indentation. J. Mech. Phys. Solids 52, 145 (2004).
36. S. Suresh and A.E. Giannakopoulos: A new method for estimating residual stresses by instrumented sharp indentation. Acta Mater. 46, 5755 (1998).
37. A.C. Fischer-Cripps: Use of combined elastic modulus in depth-sensing indentation with a conical indenter. J. Mater. Res. 18, 1943 (2003).
38. Theory Manual 5.1-1, ABAQUS, version 6.7.
39. 2, on the evaluation of machine stiffness and area function of blunt indenters on depth-sensing indentation equipment. Mater. Res. 10, 437 (2007).
40. J. Sacks, S.B. Schiller, and W.J. Welch: Designs for computer experiments. Technometrics 31, 41 (1989).
41. K.D. Bouzakis, N. Michailidis, S. Hadjiyiannis, G. Skordaris, and G. Erkens: The effect of specimen roughness and indenter tip geometry on the determination accuracy of thin hard coatings stress-strain laws by nanoindentation. Mater. Char. 49, 149 (2003).
42. O. Casals and J. Alcalá: The duality in mechanical property extractions from Vickers and Berkovich instrumented indentation experiments. Acta Mater. 53, 3545 (2005).
43. Y.T. Cheng and Z. Li: Hardness obtained from conical indentations with various cone angles. J. Mater. Res. 15, 2830 (2000).
44. A. Bolshakov and G.M. Pharr: Influences of pileup on the measurement of mechanical properties by load and depth-sensing indentation techniques. J. Mater. Res. 13, 1049 (1998).