Wheat flour thermoplastic matrix reinforced by waste cotton fibre: Agro-green-composites

Composites Part A: Applied Science and Manufacturing

Volumn 40, Issue 4, 2009, Pages 329-334

  Dobircau, L ^a,b   Sreekumar, P A ^a,b   Saiah, R ^a,b   Leblanc, N ^b   Terrie C ^b   Gattin, R ^b   Saiter, J M ^a  

^a Normandie Université   (France)

^b Laboratoire de Génie des Matériaux LGMA   (France)

Author keywords

A. Cotton fibre; A. Wheat flour; B. Mechanical properties; B. Thermal conductivity; D. TGA; D. XRD

Indexed keywords

CARBON FIBER REINFORCED PLASTICS; COTTON; COTTON FIBERS; FIBERS; GRAIN (AGRICULTURAL PRODUCT); MECHANICAL PROPERTIES; METALLIC MATRIX COMPOSITES; REINFORCED PLASTICS; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; THERMAL CONDUCTIVITY; THERMAL INSULATING MATERIALS; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS; X RAY DIFFRACTION ANALYSIS;

A. COTTON FIBRE; A. WHEAT FLOUR; B. MECHANICAL PROPERTIES; B. THERMAL CONDUCTIVITY; D. TGA; D. XRD;

POLYMER MATRIX COMPOSITES;

EID: 62949118219     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2008.11.004     Document Type: Article

References (46)

1. Yilmaz G., Jongboom R.O.J., Van Soest J.G., and Feil H. Effect of glycerol on the morphology of starch-sunflower oil composites. Carbohydr Polym 38 1 (1999) 33-39
2. Kosikova B., Osvald A., and Krajcovicova J. Role of lignin filler in stabilization of natural rubber-based composites. J Appl Polym Sci 103 (2007) 1226-1231
3. Singh B., Gupta M., and Verma A. Influence of fiber surface treatment on the properties of sisal-polyester composites. Polym Composite 17 (1996) 910-917
4. Tserki V., Matzinos P., and Panayiotou C. Cellulosic fibre-reinforced green composite. Composites A 37 (2006) 1231-1238
5. George J., Sreekala M.S., and Thomas S. A review on interface modification and characterization of natural fiber reinforced plastic composites. Polym Eng Sci 41 (2001) 1471-1485
6. Varghese S., Kuriakose B., and Thomas S. Stress relaxation in short sisal-fiber-reinforced natural rubber composite. J Appl Polym Sci 53 (1994) 1051
7. Tserki V., Matzinos P., Zafeiropoulos N.E., and Panayiotou C. Development of biodegradable composites with treated and compatibilized lignocellulosic fibers. J Appl Polym Sci 100 6 (2006) 4703-4710
8. Geethamma V.G., Reethamma J., and Thomas S. Short coir fiber-reinforced natural rubber composites: effects of fiber length, orientation, and alkali treatment. J Appl Polym Sci 55 (1995) 583-594
9. Mathew A.P., Oksman K., and Sain M. Cellulosic fibre-reinforced green composites. J Appl Polym Sci 101 (2006) 300-310
10. Mi Y., Chen X., and Guo Q. Bamboo fiber-reinforced polypropylene composites: crystallization and interfacial morphology. J Appl Polym Sci 64 7 (1998) 1267-1273
11. Coutinho F.M.B., Costa T.H.S., and Carvalho D.L. Polypropylene-wood fiber composites: effect of treatment and mixing conditions on mechanical properties. J Appl Polym Sci 65 6 (1997) 1227-1235
12. Oksman K., Lindberg H., and Holmgren A. The nature and location of SEBS-MA compatibilizer in polyethylene-wood flour composites. J Appl Polym Sci 69 (1998) 201-209
13. Vilaseca F., Mendez J.A., Pèlach A., Llop M., Cañigueral N., Gironès J., et al. Composite materials derived from biodegradable starch polymer and jute strands. Process Biochem 42 3 (2007) 329-334
14. Follain N., Joly C., Dole P., Roge B., and Mathlouthi M. Quaternary starch based blends: influence of a fourth component addition to the starch/water/glycerol system. Carbohydr Polym 63 (2006) 400-407
15. Poutanen K., and Forssell P. Modification of starch properties with plasticizers. Trends Polym Sci 4 (1996) 128-132
16. Rindlav-Westling A., Stading M., Hermansson A.M., and Gatenholm P. Structure, mechanical and barrier properties of amylose and amylopectin films. Carbohydr Polym 36 (1998) 217-224
17. Shogren R.L., Swanson C.L., and Thompson A.R. Extrudates of cornstarch with urea and glycols: structure/mechanical property relations. Starch/Starke 44 (1992) 335-338
18. Smits A.L.M., Kruiskamp P.H., Van Soest J.J.T., and Vliegenthart J.F.G. Interaction between dry starch and plasticisers glycerol or ethylene glycol, measured by differential scanning calorimetry and solid-state NMR spectroscopy. Carbohydr Polym 53 (2003) 409-416
19. Stepto R.F.T., Cail J.I., and Taylor D.J.R. Predicting the modulus of end-linked networks from formation conditions. Macromol Symp (2003) 255-264
20. Saiah R., Sreekumar P.A., Leblanc N., Castandet M., and Saiter J.M. Cereal Chem 84 (2007) 276
21. Bastioli C. Starch polymer composites in degradable polymers. Degrad Polym (1995) 112-137
22. Pierre N.S., Favis B.D., Ramsay B.A., Ramsay J.A., and Verhoogt H. Processing and characterization of thermoplastic starch/polyethylene blends. Polymer 38 (1997) 647-655
23. Koenig M.F., and Huang S.J. Biodegradable blends and composites of polycaprolactone and starch derivatives. Polymer 36 (1995) 1877
24. Matzinos P., Tserki V., Kontoyiannis A., and Panayiotou C. Processing and characterization of starch/polycaprolactone products. Polym Degrad Stabil 77 (2002) 17-24
25. Wang H., Sun X.Z., and Seib P. Mechanical properties of poly(lactic acid) and wheat starch blends with methylenediphenyl diisocyanate. J Appl Polym Sci 84 (2002) 1257-1262
26. Wollerdorfer M., and Bader H. Influence of natural fibres on the mechanical properties of biodegradable polymers. Indus Crops Prod 8 (1998) 105-112
27. Funke U., Bergthaller W., and Lindhauer L.G. Processing and characterization of biodegradable products based on starch. Polym Degrad Stabil 59 (1998) 293-296
28. Angles M.N., and Dufresne A. Plasticized/tunicin whiskers nanocomposites materials. Mech Behav Macromol 34 (2001) 2921-2931
29. Dufresne A., Dupeyre D., and Vignon M.R. Cellulose microfibrils from potato tuber cells: processing and characterization of starch-cellulose microfibril composites. J Appl Polym Sci 76 (2000) 2080-2092
30. De Carvalho A.J.F., Curvelo A.A.S., and Agnelli J.A.M. Wood pulp reinforced thermoplastic starch composites. Int J Polym Mater 51 (2002) 647-660
31. Curvelo A.A.S., De Carvalho A.J.F., and Agnelli J.A.M. Thermoplastic starch-cellulosic fibers composites: preliminary results. Carbohydr Polym 45 (2001) 183-188
32. Dufresne A., and Vignon M.R. Improvement of starch film performances using cellulose microfibrils. Macromolecules 31 (1998) 2693-2696
33. Mathew A.P., and Dufresne A. Morphological Investigations of nanocomposites from sorbitol elasticised starch and tunicin whiskers. Biomacromolecules 3 (2002) 609-617
34. Leblanc N., Saiah R., Beucher E., Gattin R., Castandet M., and Saiter J.M. Structural investigation and thermal stability of new extruded wheat flour based polymeric materials. Carbohydr Polym 73 (2008) 548-557
35. Limare A., Duvant T., and Bachmann J.M. Photopyroelectrical measurement of the thermal properties of knitted textile samples. Influence of composition, structural parameters and water content. Int J Therm Sci 42 (2003) 963-972
36. Elesini U.S., Cuden A.P., and Richards A.F. Study of green cotton fibres. Acta Chem Slov 49 (2002) 815-833
37. Vijay K., and Sanjeev H.K. Effect of compressional force on the crystallinity of directly compressible cellulose excipients. Int J Pharm 177 (1999) 173-182
38. Ma X., Yu J., and Kennedy J.H. Studies on the properties of natural fibers-reinforced thermoplastic starch composites. Carbohydr Polym 62 (2005) 19-24
39. Ko J.J., Shimizu Y., Ikeda K., Kim S.Q., Park S.H., and Matsui S. Biodegradation of high molecular weight lignin under sulfate reducing conditions: lignin degradability and degradation by-products. Bioresour Technol. 100 4 (2009) 1622-1627
40. Lin JH, Chang YH, Hsu YH. Degradation food hydrocolloids of cotton cellulose treated with hydrochloric acid either in water or in ethanol. Available online 22 October 2008, in press.
41. Roman H., Madikane M., Pletschke B.I., and Rose P.D. The degradation of lignocellulose in a chemically and biologically generated sulphidic environment. Bioresour Technol 99 7 (2008) 2333-2339
42. Devallencourt C., Saiter J.M., and Capitaine D. Characterization of recycled celluloses: thermogravimetry/Fourier transform infra-red coupling and thermogravimetry investigations. Polym Degrad Stabil 52 3 (1996) 327-334
43. Wollerdorfer M., and Bader H. Influence of natural fibres on the mechanical properties of biodegradable polymers. Indus Crops Prod 8 2 (1998) 105-112
44. Sreekumar P.A., Joseph K., Unnikrishnan G., and Thomas S. A comparative study on mechanical properties of sisal-leaf fibre-reinforced polyester composites prepared by resin transfer and compression moulding techniques. Compos Sci Technol 67 (2007) 453-461
45. Gopalakrishnan P., Saiah R., Gattin R., and Saiter J.M. Effect of mercerization of flax fibers on wheat flour/flax fiber composite with respect to thermal and tensile properties. Compos Interface 15 7-9 (2008) 759-770
46. Obata Y., Takeuchi K., Furuta Y., and Kanayama K. Research on better use of wood for sustainable development: quantitative evaluation of good tactile warmth of wood. Energy 30 8 (2005) 1317-1328