Tensile bond strength of single-step self-etch adhesives to Er:YAG laser-irradiated dentin

Photomedicine and Laser Surgery

Volumn 27, Issue 1, 2009, Pages 3-10

  Kameyama, Atsushi ^a   Aizawa, Koya ^a   Kato, Junji ^a   Hirai, Yoshito ^a  

^a TOKYO DENTAL COLLEGE   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

BOND STRENGTHS; BOVINE INCISORS; ER: YAG; ER:YAG LASERS; FAILURE PATTERNS; LOW VISCOSITIES; RESIN COMPOSITES; SELF-ETCH ADHESIVES; SINGLE STEPS; SUB-SURFACE DAMAGES; TENSILE BOND STRENGTHS; TENSILE BONDS;

ADHESIVES; ERBIUM; IRRADIATION; LASERS; RESINS; SCANNING ELECTRON MICROSCOPY; SILICON CARBIDE; TENSILE TESTING;

BOND STRENGTH (MATERIALS);

ANIMALS; CATTLE; DENTAL BONDING; DENTIN; DENTIN-BONDING AGENTS; LASERS, SOLID-STATE; RESIN CEMENTS; TENSILE STRENGTH;

EID: 61649099650     PISSN: 15495418     EISSN: None     Source Type: Journal    
DOI: 10.1089/pho.2007.2170     Document Type: Article

References (37)

1. De Munck, J., Van Landuyt, K., Peumans, M., et al. (2005). A critical review of the durability of adhesion to tooth tissue: methods and results. J. Dent. Res. 84, 118-132.
2. Van Meerbeek, B., Van Landuyt, K., De Munck, J., et al. (2005). Technique-sensitivity of contemporary adhesives. Dent. Mater. J. 24, 1-13.
3. Koshiro, K., Sidhu, S.K., Inoue, S., Ikeda, T., and Sano, H. (2006). New concept of resin-dentin interfacial adhesion: the nanointeraction zone. J. Biomed. Mater. Res. Part B Appl. Biomater. 77B, 401-408.
4. Visuri, S.R., Gilbert, J.L., Wright, D.D., Wigdor, H.A., and Walsh, J.T., Jr. (1996). Shear strength of composite bonded to Er:YAG laser-prepared dentin. J. Dent. Res. 75, 599-605.
5. Kameyama, A., Kawada, E., Takizawa, M., Oda, Y., and Hirai, Y. (2001). Influence of different acid conditioners on the tensile bond strength of 4-META/MMA-TBB resin to Er:YAG laser-irradiated bovine dentin. J. Adhes. Dent. 2, 297-304.
6. De Munck, J., Van Meerbeek, B., Yudhira, R., Lambrechts, P., and Vanherle, G. (2002). Micro-tensile bond strength of two adhesives to erbium:YAG-lased vs. bur-cut enamel and dentin. Eur. J. Oral Sci. 110, 322-329.
7. Ceballos, L., Toledano, M., Osorio, R., Tay, F.R., and Marshall, G.W. (2002). Adhesion of Er-YAG-laser-treated dentin. J. Dent. Res. 81, 119-122.
8. Çelik, E.U., Ergücü, Z., Türkün, L.S., and Türkün, M. (2006). Shear bond strength of different adhesives to Er:YAG laser-prepared dentin. J. Adhes. Dent. 8, 319-325.
9. Kameyama, A., Kawada, E., Takizawa, M., et al. (2000). Influence of acid treatment on Er:YAG laser-irradiated bovine dentin: morphological changes of lased surface. Adhes. Dent. 18, 126-132 (in Japanese).
10. Ishizaka, Y., Eguro, T., Maeda, T., and Tanaka, H. (2002). Effects of Er:YAG laser irradiation on human dentin: polarizing microscopic, light microscopic and microradiographic observations, and FT-IR analysis. Lasers Surg. Med. 31, 171-176.
11. Aizawa, K., Kameyama, A., Kato, J., Oda, Y., and Hirai, Y. (2008). Influence of free hand vs. uniform irradiation on tensile bond strength in Er:YAG-lased dentin. J. Adhes. Dent. 10, 295-299.
12. Mine, A. (2003). Effect of Er:YAG laser irradiation on bonding, structural and mechanical properties of dental hard tissues. J. Okayama Dent. Assoc. 22, 123-137 (in Japanese).
13. Monghini, E.M., Wanderley, R.L., Pecora, J.D., Palma Dibb, R.G., Corona, S.A.M., and Borsatto, M.C. (2004). Bond strength to dentin of primary teeth irradiated with varying Er:YAG laser energies and SEM examination of the surface morphology. Lasers Surg. Med. 34, 254-259.
14. Aizawa, K., Kameyama, A., Kato, J., et al. (2006). Resin bonding to dentin irradiated by high repetition rate Er:YAG laser. Photomed. Laser Surg. 24, 397-401.
15. Gonçalves, M., Corona, S.A.M., Borsatto, M.C., Pecora, J.D., and Palma Dibb, R.G. (2005). Influence of pulse frequency of Er:YAG laser on the tensile bond strength of a composite to dentin. Am. J. Dent. 18, 165-167.
16. de Souza-Gabriel, A.E., Chinelatti, M.A., Borsatto, M.C., Pecora, J.D., Palma-Dibb, R.G., and Corona, S.A.M. (2006). Effect of Er:YAG laser irradiation distance on superficial dentin morphology. Am. J. Dent. 19, 217-221.
17. Ramos, R.P., Chimello, D.T., Chinelatti, M.A., Nonaka, T., Pecora, J.D., and Palma-Dibb, R.G. (2002). Effect of Er:YAG laser on bond strength to dentin of a self-etching primer and two single-bottle adhesive systems. Lasers Surg. Med. 31, 164-170.
18. Kataumi, M., Nakajima, M., Yamada, T., and Tagami, J. (1998). Tensile bond strength and SEM evaluation of Er:YAG laser irradiated dentin using dentin adhesive. Dent. Mater. J. 17, 125-138.
19. Kameyama, A., Kawada, E., Amagai, T., Takizawa, M., Oda, Y., and Hirai, Y. (2002). Effect of HEMA on bonding of Er:YAG laser-irradiated bovine dentine and 4-META/MMA-TBB resin. J. Oral Rehabil. 29, 749-755.
20. Omae, M., Inoue, M., Itota, T., et al. (2007). Effect of a desensitizing agent containing glutaraldehyde and HEMA on bond strength to Er:YAG laser-irradiated dentine. J. Dent. 35, 398-402.
21. Peumans, M., Kanumilli, P., De Munck, J., Van Landuyt, K., Lambrechts, P., and Van Meerbeek, B. (2005). Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent. Mater. 21, 864-881.
22. Takahashi, A., Sato, Y., Uno, S., Pereira, P.N.R., and Sano, H. (2002). Effect of mechanical properties of adhesive resins on bond strength to dentin. Dent. Mater. 18, 263-268.
23. Schulze, K.A., Oliveira, S.A., Wilson, R.S., Gansky, S.A., Marshall, G.W., and Marshall, S.J. (2005). Effect of hydration variability on hybrid layer properties of a self-etching versus an acid-etching system. Biomaterials 26, 1011-1018.
24. Inoue, S., Koshiro, K., Yoshida, Y., et al. (2005). Hydrolytic stability of self-etch adhesives bonded to dentin. J. Dent. Res. 84, 1160-1164.
25. Toledano, M., Osorio, R., de Leonardi, G., Rosales-Leal, J.I., Ceballos, L., and Cabrerizo-Vilchez, M.A. (2001). Influence of self-etching primer on the resin adhesion to enamel and dentin. Am. J. Dent. 14, 205-210.
26. Ishikawa, A., Shimada, Y., Foxton, R.M., and Tagami, J. (2007). Micro-tensile and micro-shear bond strengths of current self-etch adhesives to enamel and dentin. Am. J. Dent. 20, 161-166.
27. Yoshida, Y., Nagakane, K., Fukuda, R., et al. (2004). Comparative study on adhesive performance of functional monomers. J. Dent. Res. 83, 454-458.
28. Takahashi, A., Sato, Y., Uno, S., Pereira, P.N.R., and Sano, H. (2002). Effects of mechanical properties of adhesive resins on bond strength to dentin. Dent. Mater. 18, 263-268.
29. Kanehira, M., Finger, W.J., Hoffmann, M., Endo, T., and Komatsu, M. (2006). Relationship between degree of polymerization and enamel bond strength with self-etching adhesives. J. Adhes. Dent. 8, 211-216.
30. Tay, F.R., Pashley, D.H., Suh, B.I., Carvalho, R.M., and Itthagarun, A. (2002). Single-step adhesives are permeable membranes. J. Dent. Res. 30, 371-382.
31. Tay, F.R., and Pashley, D.H. (2003). Water treeing - a potential mechanism for degradation of dentin adhesives. Am. J. Dent. 16, 6-12.
32. Yoshida, E., and Uno, S. (2004). Void formation along the bonding interface between a smeared dentin surface and all-in-one adhesives. Dent. Mater. J. 23, 643-649.
33. Van Landuyt, K.L., De Munck, J., Snauwaert, J., et al. (2005). Monomer-solvent phase separation in one-step self-etch adhesives. J. Dent. Res. 84, 183-188.
34. Hiraishi, N., Breschi, L., Prati, C., Ferrari, M., Tagami, J., and King, N.M. (2007). Technique sensitivity associated with air-drying of HEMA-free, single-bottle, one-step self-etch adhesives. Dent. Mater. 23, 498-505.
35. Sasakawa, W., Nakaoki, Y., Nagano, F., et al. (2005). Microshear bond strength of five single-step adhesives to dentin. Dent. Mater. J. 24, 617-627.
36. Aizawa, K., Kameyama, A., Kato, J., and Hirai, Y. (2008). Nano-hardness of adhesive interface between Er:YAG laser-irradiated dentin and 4-META/MMA-TBB resin. Photomed. Laser Surg. 26, 107-111.
37. Kameyama, A., Kato, J., Aizawa, K., Suemori, T., and Hirai, Y. (2008). Tensile bond strength of one-step self-etch adhesives to Er:YAG laser-irradiated and non-irradiated enamel. Dent. Mater. J. 27, 386-391.