Residual stresses in orthogonal cutting of metals: The effect of thermomechanical coupling parameters and of friction

Journal of Thermal Stresses

Volumn 32, Issue 3, 2009, Pages 269-289

  Miguelez M H ^a   Zaera, R ^a   Molinari, A ^b   Cheriguene, R ^a   Rusinek, A ^b  

^a UNIVERSIDAD CARLOS III DE MADRID   (Spain)

^b UNIVERSITÉ DE LORRAINE   (France)

Author keywords

Friction; Orthogonal machining; Parametric analysis; Residual stresses; Thermomecha nical coupling parameters

Indexed keywords

MACHINING; RESIDUAL STRESSES; STRENGTH OF MATERIALS; THERMAL EXPANSION; THERMOMECHANICAL TREATMENT; TRIBOLOGY;

ARBITRARY LAGRANGIAN-EULERIAN; COMPLEX EFFECTS; COULOMB FRICTION LAWS; DRY CUTTINGS; FINITE-ELEMENT APPROACHES; FRICTION COEFFICIENTS; FRICTIONAL HEATING; GEOMETRICAL EFFECTS; MACHINED SURFACES; ORTHOGONAL CUTTINGS; ORTHOGONAL MACHINING; PARAMETRIC ANALYSIS; PARAMETRIC STUDIES; TENSILE RESIDUAL STRESS; THERMAL SOFTENING; THERMO-MECHANICAL COUPLINGS; THERMOMECHA-NICAL COUPLING PARAMETERS; TOOL EDGE RADIUS; TOOL RAKE ANGLES;

FRICTION;

EID: 61449099788     PISSN: 01495739     EISSN: 1521074X     Source Type: Journal    
DOI: 10.1080/01495730802637134     Document Type: Article

References (50)

1. K. Okushima and Y. Kakino, A Study on the Residual Stress Produced by Metal Cutting, Memoirs of the Faculty of Engineering, Kuyoto, vol. 34, pp. 234-248, 1972.
2. S. Y. Liang and J.-C. Su, Residual Stress Modeling in Orthogonal Machining, Ann. CIRP, vol. 56, no. 1, pp. 65-68, 2007.
3. M. Vaz, Jr., D. R. J. Owen, V. Kalhori, M. Lundblad, and L.-E. Lindgren, Modelling and Simulation of Machining Processes, Arch. Comput. Meth. Eng., vol. 14, pp. 173-204, 2007.
4. K. F. Ehmann, S. G. Kpoor, R. E. DeVor, and I. Lazoglu, Machining Processes Modelling: A Review, J. Manuf. Sci. Eng. Trans. ASME, vol. 119, pp. 655-663, 2006.
5. J. Mackerle, Finite Element Analysis and Simulation of Machining: An Addendum a Bibliography (1996-2002), Int. J. Tools Manuf., vol. 43, pp. 103-114, 2003.
6. D. Y. Jang, T. R. Watkins, K. J. Kozaczek, C. R. Hubbard, and O. B. Cavin, Surface Residual Stresses in Machined Austenitic Stainless Steel, Wear, vol. 194. pp. 168-173, 1996.
7. L. Chen, T. I. El-Wardany, and W. C. Harris, Modelling the Effects of Flank Wear Land and Chip Formation on Residual Stresses, Ann. CIRP, vol. 53, no. 1, pp. 95-98, 2004.
8. M. Nasr, E. G. Ng, and M. A. Elbestawi, Modelling the Effects of Tool-Edge Radius on Residual Stresses when Orthogonal Cutting AISI316L, Inter. J. Mach. Tools Manuf., vol. 47, pp. 401-411, 2007.
9. D. Umbrello, R. M'Saoubi, and J. C. Outeiro, The Influence of Johnson-Cook Material Constants on Finite Element Simulation of Machining of AISI 316L Steel, Int. J. Mach. Tools Manuf., vol. 47, pp. 462-470, 2007.
10. C. R. Liu and Y. B. Guo, Finite Element Analysis of the Effect of Sequential Cuts and Tool/Chip Friction on Residual Stresses in a Machined Layer, Int. J. Mech. Sci., vol. 42, pp. 1069-1086, 2000.
11. M. Salio, T. Berruti, and G. De Poli, Prediction of Residual Stress Distribution Alter Turning in Turbine Disks, Inter. J. Mech. Sci., vol. 48, pp. 976-984, 2006.
12. J. C. Outeiro, A. M. Dias, J. L. Lebrun, and V. P. Astakhov, Machining Residual Stresses in AISI316L Steel and Their Correlation with the Cutting Parameters, Mach. Sci. Technol., vol. 6, no. 2, pp. 251-270, 2002.
13. J. C. Outeiro and A. M. Dias, Influence of Work Material Properties on Residual Stresses and Work Hardening Induced by Machining, Mater. Sci. Forum, vol. 524-525, pp. 575-580, 2006.
14. R. M'Saoubi, J. C. Outeiro, B. Changeux, J. L. Lebrun, and A. Moräo Dias, Residual Stress Analysis in Orthogonal Machining of Standard and Resulfurized AISI 316L Steels, J. Mater. Proc. Tech., vol. 96, pp. 225-233, 1999.
15. J. C. Outeiro, A. M. Dias, and I. S. Jawahir, On the Effects of Residual Stresses Induced by Coated and Uncoated Cutting Tools with Finite Edge Radii in Turning Operations, Ann. CIRP, vol. 55, no. 1, pp. 111-116, 2006.
16. J. C. Outeiro, D. Umbrello, and R. M'Saoubi, Experimental and FEM Análisis of Cutting Sequence on Residual Stresses in Machined Layers of AISI 316L Steel, Mater. Sci. Forum, vol. 524-525, pp. 179-184, 2006.
17. Z.-C. Lin, Y.-Y. Lin, and C. R. Liu, Effect of Thermal Load and Mechanical Load on the Residual Stress of a Machined Workpiece, Int. J. Mech. Sci., vol. 33, no. 4, pp. 263-278, 1991.
18. M. Bäker, Finite Element Simulation of Chip Formation, Shaker Verlag, Aachen, 2004.
19. M. Barge, H. Hamdi, J. Rech, and J. M. Bergheau, Numerical Modelling of Orthogonal Cutting: Influence of Numerical Parameters, J. Mat. Pro. Tech., vol. 164-165, pp. 1148-1153, 2005.
20. T. H. C. Childs and K. Maekawa, Computer-aided Simulation and Experimental Studies of Chip Flow and Tool Wear in the Turning of Low Alloy Steels by Cemented Carbide Tools, Wear, vol. 139, pp. 235-250, 1990.
21. M. H. Dirikolu, T. H. C. Childs, and K. Maekawa, Finite Element Simulation of Chip Flow in Metal Machining, Inter. J. Mech. Sci., vol. 43, pp. 2699-2713, 2001.
22. T. D. Marusich and M. Ortiz, Modelling and Simulation of High-Speed Machining, Inter. J. Numer. Meth. Eng., vol. 38, pp. 3675-3694, 1995.
23. E. Ceretti, P. Fallböhmer, W. T. Wu, and T. Altan, Application of 2D FEM to Chip Formation in Orthogonal Cutting, J. Mater. Proc. Technol., vol. 59, pp. 169-181, 1996.
24. E. Ceretti, M. Lucchi, and T. Altan, FEM Simulation Orthogonal Cutting: Serrated Chip Formation, J. Mater. Proc. Tech., vol. 95, pp. 17-26, 1999.
25. T. Özel and T. Altan, Process Simulation Using Finite Element Method Prediction of Cutting Forces, Tool Stresses and Temperatures in High Speed Flat end Milling Process, Inter. J. Mach. Tools Manuf., vol. 40, no. 5, pp. 713-738, 2000.
26. T. Özel and T. Altan, Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High-Speed Cutting, Inter. J. Mach. Tools Manuf., vol. 40, no. 1, pp. 133-152, 2000.
27. M. Bäker, J. Rosier, and C. Siemers, A Finite Element Model of High Speed Metal Cutting with Adiabatic Shearing, Comput. Struct., vol. 80, pp. 495-513, 2002.
28. K. S. Woon, M. Rahman, F. Z. Fang, K. S. Neo, and K. Liu, Investigations of Tool Edge Radius Effect in Micromachining: A FEM Simulation Approach, J. Mater. Proc. Technol., vol. 195, no. 1, pp. 204-211, 2008.
29. M. R. Movahhedy, Y. Altintas, and M. S. Gadala, Numerical Analysis of Metal Cutting with Chamfered and Blunt Tools, Trans. ASME, J. Manuf. Sci. Eng., vol. 124, pp. 178-188, 2002.
30. L. Olovsson, L. Nilsson, and K. Simonsson, An A.L.E. Formulation for the Solution of Two-Dimensional Metal Cutting Problems, Computers and Structures, vol. 72, pp. 497-507, 1999.
31. E. Ceretti, L. Filice, D. Umbrello, and F. Micari, ALE Simulation of Orthogonal Cutting: A New Approach to Model Heat Transfer Phenomena at the Tool-Chip Interface, Ann. CIRP, vol. 56, no. 1, 2007.
32. M. Movahhedy, M. S. Gadala, and Y. Altintas, Simulation of the Orthogonal Metal Cutting Process Using an Arbitrary Lagrangian-Eulerian Finite-Element Method, J. Mater. Proc. Technol., vol. 103, pp. 267-275, 2000.
33. O. Pantalé. T.-L. Bacaria, O. Dalverny, R. Rakotomalala, and S. Caperaa, 2D and 3D Numerical Models of Metal Cutting with Damage Effects, Comp. Meth. Appl. Mech. Eng., vol. 193, pp. 4383-4399, 2004.
34. Hibbit Karlson and Sorensen Inc., ABAQUS/Explicit User's Manual, 6.4-1, 2003.
35. T. Özel and E. Zeren, Finite Element Modelling of Stresses Induced by High Speed Machining with Round Edge Cutting Tools, Proc. IMECE'05, Orlando, Florida, November 5-11, 2005.
36. H. Miguélez, R. Zaera, A. Rusinek, A. Moufki, and A. Molinari, Numerical Modelling of Orthogonal Cutting: Influence of Cutting Conditions and Separation Criterion, J. Phys. IV, vol. 134, pp. 417-422, 2006.
37. G. Barrow, A Review of Experimental and Theoretical Techniques for Assessing Cutting Temperatures, Ann. CIRP, vol. 22, no. 2, pp. 203-211, 1973.
38. A. O. Schmidt, O. W. Gilbert, and A. Boston, Thermal Balance Method and Mechanical Investigation for Evaluating Machinability, Trans. ASME, vol. 67, 1945.
39. A. Moufki, A. Molinari, and D. Dudzinski, Modelling of Orthogonal Cutting with a Temperature Dependent Friction Law, J. Mech. Phys. Solids, vol. 46, no. 10, pp. 2103-2138, 1998.
40. T. H. Childs, K. Maekawa, T. Obikawa, and Y. Yamane, Metal Machining-Theory and Applications. Arnold, London, 2000.
41. K. Komvopoulos and S. A. Erpenbeck, Finite Element Modeling of Orthogonal Metal Cutting, ASME J. Eng. Indus., vol. 113, pp. 253-267, 1991.
42. A. J. Shih, S. Chandrasekar, and H. T. Yang, Finite Element Simulation of Metal Cutting Process with Strain-Rate and Temperatures Effects, Fund. Issues Much. ASME, PED, vol. 43, pp. 11-24, 1990.
43. Z. C. Lin and S. Y. Lin, A Couple Finite Element Model of Thermo-Elastoplastic Large Deformation for Orthogonal Cutting, ASME J. Eng. Indus., vol. 114, pp. 218-226, 1992.
44. J. Shi and C. R. Liu, The Influence on Material Models on Finite Element Simulation of Machining, J. Manuf. Sci. Eng., vol. 126, pp. 849-857, 2004.
45. G. R. Johnson and W. H. Cook, A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rate and Temperature, Proc. Inter. Symp. Ballist., pp. 541-547, 1983.
46. M. Barge, H. Hamdi, J. Rech, and J.-M. Bergheau, Numerical Modelling of Orthogonal Cutting: Influence of Numerical Parameters, J. Mater. Proc. Technol., vol. 164-165, pp. 1148-1153, 2005.
47. T. Mabrouki, J.-F. Rigal, A Contribution to a Qualitative Understanding of Thermomechanical Effects During Chip Formation in Hard Turning, J. Mat. Process. Tech., vol. 176, pp. 214-221, 2006.
48. H. Chandrasekaran, R. M'Saoubi, and H. Chazal, Modelling of Material Flow Stress in Chip Formation Process from Orthogonal Milling and Split Hopkinson Bar Tests, Mater. Sci. Technol., vol. 9, pp. 131-145, 2005.
49. M. N. A. Nasr, E.-G. Ng, and M. A. Elbestawi, Effects of Strain Hardening and Initial Yield Strength on Machining-Induced Residual Stresses, J. Eng. Mater. Technol., vol. 129, pp. 567-579, 2007.
50. N. Tounsi, J. Vincenti, A. Otho, and M. A. Elbestawi, From the Basics of Orthogonal Metal Cutting Toward the Identification of the Constitutive Equation, Inter. J. Mack Tools Manuf., vol. 42, no. 2, pp. 1373-1383, 2002.