Flexural strength, fatigue life, and stress-induced phase transformation study of Y-TZP dental ceramic

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 88, Issue 2, 2009, Pages 366-377

  Pittayachawan, Piyapanna ^a   McDonald, Ailbhe ^a   Young, Anne ^a   Knowles, Jonathan C ^a  

^a UNIVERSITY COLLEGE LONDON   (United Kingdom)

Author keywords

Fatigue life; Flexural strength; Phase transformation; Raman micro spectroscopy; Zirconia

Indexed keywords

BI-AXIAL FLEXURAL STRENGTHS; BULK PHASIS; CUBIC PHASE; DENTAL CERAMICS; DYNAMIC FATIGUES; FATIGUE LIFE; FLEXURAL STRENGTH; FLEXURAL TESTING; FRACTURE SURFACES; HARDNESS VALUES; HIGH LOADS; HIGH STRENGTHS; INDENTATION EDGES; LOCAL PHASE; MONOCLINIC PHASE; MONOCLINIC PHASIS; PARTIALLY-STABILIZED ZIRCONIAS; PHASE TRANSFORMATION; POLISHED SURFACES; POLY-CRYSTALLINE; PRESSURE-INDUCED PHASE TRANSFORMATIONS; RAMAN MICRO-SPECTROSCOPY; SERVO-HYDRAULIC TESTING MACHINES; SINGLE CYCLES; STRESS-INDUCED PHASE TRANSFORMATIONS; TRANSFORMATION TOUGHENING; VICKERS INDENTATIONS; WEIBULL MODULUS; X- RAY DIFFRACTIONS; ZIRCONIA-BASED CERAMICS;

BENDING STRENGTH; BIOLOGICAL MATERIALS; CERAMIC MATERIALS; DENTAL MATERIALS; FAILURE ANALYSIS; FATIGUE OF MATERIALS; FATIGUE TESTING; FRACTURE; FRACTURE TESTING; INTERMETALLICS; LIFE CYCLE; MECHANICAL PROPERTIES; PHASE TRANSITIONS; REGRESSION ANALYSIS; SURFACE TESTING; SURFACES; TENSILE STRENGTH; VICKERS HARDNESS; VICKERS HARDNESS TESTING; WEIBULL DISTRIBUTION; YTTRIA STABILIZED ZIRCONIA; ZIRCONIA;

YTTRIUM ALLOYS;

YTTRIUM; ZIRCONIUM;

ARTICLE; BIOMECHANICS; HARDNESS; MACHINE; PHASE TRANSITION; RAMAN SPECTROMETRY; STRENGTH; STRESS; SURFACE PROPERTY; TOOTH PROSTHESIS; X RAY DIFFRACTION;

DENTAL PORCELAIN; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; SPECTRUM ANALYSIS, RAMAN; STRESS, MECHANICAL; X-RAY DIFFRACTION; YTTRIUM; ZIRCONIUM;

EID: 60849115260     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31064     Document Type: Article

References (39)

1. Li M, Feng Z, Ying P, Xin Q, Li C. Phase transformation in the surface region of zirconia and doped zirconia detected by UV Raman spectroscopy. Phys Chem Chem Phys 2003;5:5326-5332.
2. Helmer JD, Driskell TD. Research on bioceramics. In: Symposium on Use of Ceramics as Surgical Implants. Clemson, South Carolina: Clemson University; 1969.
3. Meyenberg KH, Luthy H, Scharer P. Zirconia posts: A new all-ceramic concept for nonvital abutment teeth. J Esthet Dent 1995;7:73-80.
4. Kohal RJ, Klaus G. A zirconia implant-crown system: A case report. Int J Periodontics Restorative Dent 2004;24:147-153.
5. Kohal RJ, Klaus G, Strub JR. Zirconia-implant-supported all-ceramic crowns withstand long-term load: A pilot investigation. Clin Oral Implants Res 2006;17:565-571.
6. Luthardt RG, Holzhüter MS, Rudolph H, Herold V, Walter MH. CAD/CAM-machining effects on Y-TZP zirconia. Dent Mater 2004;20:655-662.
7. Lüthy H, Filser F, Loeffel O, Schumacher M, Gauckler LJ, Hammerle CHF. Strength and reliability of four-unit all-ceramic posterior bridges. Dent Mater 2005;21:930-937.
8. Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia- based three-unit fixed partial dentures: A laboratory study. Int J Prosthodont 2001;14:231-238.
9. Scott HG. Phase relationships in the zirconia-yttria system. J Mater Sci 1975;10:1527-1535.
10. Garvie RC, Hannink RH, Pascoe RT. Ceramic steel. Nature 1975;258:703-704.
11. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 1999;15:426-433.
12. Curtis AR, Wright AJ, Fleming GJP. The influence of surface modification techniques on the performance of a Y-TZP dental ceramic. J Dent 2005;1-12.
13. Chevalier J. Low-temperature aging of Y-TZP ceramics. J Am Ceram Soc 1999;82:2150-2154.
14. Deville S, Chevalier J, Dauvergne C, Fantozzi G. Microstructural investigation of the aging behavior of (Y-TZP)-Al2 O3 composites. J Am Ceram Soc 2005;88:1273-1280.
15. Porter DL, Heuer AH. Mechanisms of toughening partially stabilized zirconia (PSZ). J Am Ceram Soc 1977;60:183-184.
16. Guazzato M, Quach L, Albakry M, Swain MV. Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic. J Dent 2005;33:9-18.
17. Denry IL, Holloway JA. Microstructural and crystallographic surface changes after grinding zirconia-based dental ceramics. J Biomed Mater Res B Appl Biomater 2006;76:440-448.
18. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. Strength and reliability of surface treated Y-TZP dental ceramics. J Biomed Mater Res 2000;53:304-313.
19. Kailer A, Nickel K, Gogotsi Y. Raman microspectroscopy of nanocrystalline and amorphous phases in hardness indentations. J Raman Spectrosc, 1999;30:939-946.
20. Casellas D, Cumbrera F, Sánchez-Bajo F, Forsling W, Llanes L, Anglada M. On the transformation toughening of Y-ZrO2 ceramics with mixed Y-TZP/PSZ microstructures. J Europ Ceram Soc 2001;21:765-777.
21. Colomban P, Havel M. Raman imaging of stress-induced phase transformation in transparent ZnSe ceramic and sapphire single crystals. J Raman Spectrosc 2002;33:789-795.
22. Behrens G, Dransmann GW, Heuer AH. On the isothermal martensitic transformation in 3Y-TZP. J Am Ceram Soc 1993;76:1025-1030.
23. ISO 6872. International Standard for Dental Ceramic. 2nd ed, 1995.
24. BSI ENV 843-4. Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperatures. Vickers, Knoop and Rockwell superficial hardness tests, 1995.
25. Weibull W. A statistical distribution function of wide applicability. J Appl Mech 1951;18:293-297.
26. Coelho AA. Indexing powder patterns by iterative use of singular value decomposition. J Appl Cryst 2003;36:86-95.
27. Larson AC, Von Dreele RB, Lujan M Jr. GSAS-generalised crystal structure analysis system. Neutron Scattering Centre, Los Alamos National Laboratory, 1990.
28. Witke K, Österle W, Skopp A, Woydt M. Raman microprobe spectroscopy and transmission electron microscopy of thermal sprayed ZrO2 coatings before and after rub testing of outer air seals. J Raman Spectrosc 2001;32:1008-1014.
29. Sekulic A, Furic K, Tonejc A, Tonejc AM, Stubicar M. Determination of the monoclinic, tetragonal and cubic phases in mechanically alloyed ZrO2-Y2O3 and ZrO2-CaO powder mixtures by Raman spectroscopy. J Mater Sci Lett 1997;16:260-262.
30. Ruiz L, Readey MJ. Effect of heat treatment on grain size, phase assemblage, and mechanical properties of 3 mol% Y-TZP. J Am Ceram Soc 1996;79:2331-2340.
31. Ritter JE. Predicting lifetimes of materials and material structures. Dent Mater 1995;11:142-146.
32. Johnson CA. Fracture statics of multiple flaw distribution. In: Richard C, Hasselman DP, Lange FF, editors. Fracture Mechanics of Ceramics, Vol. 5. New York: Plenum Press; 1983. pp 365-386.
33. Pittayachawan P, McDonald A, Petrie A, Knowles JC. The biaxial flexural strength and fatigue property of Lava Y-TZP dental ceramic. Dent Mater 2007;23:1018-1029.
34. Kim B, Zhang Y, Pines M, Thompson VP. Fracture of porcelain-veneered structures in fatigue. J Dent Res 2007;86:142-146.
35. Anusavice KJ. Mechanical properties of dental materials. In: Anusavice KJ, editor. Phillips' Science of Dental Materials, 11 ed. Philadelphia, PA: Saunders; 2003. p. 93.
36. Craig RG, Ward ML. Mechanical properties. In: Craig RG, Powers JM, editors. Restorative Dental Materials, 10 ed. St. Louis: Mosby; 1997. p. 56.
37. Leach CA. A Raman microprobe study of a magnesia partially stabilized zirconia fracture surface. J Mater Sci 1989;24:1380-1382.
38. Reese MJ, Tetlow PL, Galiotis C. Phase transformation around indentations in zirconia. J Mater Sci Lett 1992;11:575-577.
39. Zhang MX, Kelly PM. Further study of the model for stress-induced martensitic transformation in Fe-Ni-C alloy and white cast iron. Mater Sci Eng A 2002;326:282-287.