Effect acidic and alkaline/heat treatments on the bond strength of different luting cements to commercially pure titanium

Journal of Dentistry

Volumn 37, Issue 4, 2009, Pages 255-263

  Fawzy, Amr S ^a   El Askary, Farid S ^b  

^a Ain Shams University   (Egypt)

^b Faculty of Dentistry   (Egypt)

Author keywords

AFM surface characterization; Luting cements; Shear bond strength; Surface treatment; Titanium

Indexed keywords

DENTIN BONDING AGENT; FUJI GLASS IONOMER LINING CEMENT; FUJI GLASS-IONOMER LINING CEMENT; FUJIPLUS; GLASS IONOMER; RELY X UNICEM; RESIN CEMENT; TITANIUM; TOOTH CEMENT;

ANALYSIS OF VARIANCE; ARTICLE; CHEMISTRY; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; DENTAL ETCHING; METHODOLOGY; NONPARAMETRIC TEST; SHEAR STRENGTH; SURFACE PROPERTY;

ANALYSIS OF VARIANCE; DENTAL BONDING; DENTAL CEMENTS; DENTAL ETCHING; DENTAL STRESS ANALYSIS; DENTIN-BONDING AGENTS; GLASS IONOMER CEMENTS; RESIN CEMENTS; SHEAR STRENGTH; STATISTICS, NONPARAMETRIC; SURFACE PROPERTIES; TITANIUM;

EID: 60449109598     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2008.11.021     Document Type: Article

References (34)

1. Wang R.R., and Fenton A. Titanium for prosthodontic applications: a review of the literature. Quintessence International 27 (1996) 401-408
2. McCracken M. Dental implant materials: commercially pure titanium and titanium alloys. Journal of Prosthetic Dentistry 18 (1999) 40-43
3. Watanabe F., Powers J.M., and Lorey R.F. In vitro bonding of prosthodontic adhesive to dental alloys. Journal of Dental Research 67 (1988) 479-483
4. Blackman R., Barghi N., and Tran C. Dimensional changes in casting titanium removable partial denture frameworks. Journal of Prosthetic Dentistry 65 (1991) 309-315
5. Anderson M., Bergman B., Bessing C., Ericson G., Lundquist P., and Nilson H. Clinical results with titanium crowns fabricated with machine duplication and spark erosion. Acta Odontologica Scandinavica 47 (1989) 279-286
6. Kononen M., Rintanen J., Waltimo A., and Kempainen P. Titanium framework removable partial dentures used for patient allergic to other metals: a clinical report and literature review. Journal of Prosthetic Dentistry 73 (1995) 4-7
7. Breeding L.C., Dixon D.L., Bogacki M.T., and Tiege J.D. Use of luting agents in implant system. Part I. Journal of Prosthetic Dentistry 68 (1992) 737-741
8. Hebel K.S., and Gajjar R.C. Cement-retained versus screw retained implant restorations: achieving optimal occlusion and esthetics in implant dentistry. Journal of Prosthetic Dentistry 77 (1997) 28-35
9. Ban S. Effect of alkaline treatment of pure titanium and its alloys on the bonding strength of dental veneering resins. Journal of Biomedical Materials Research 66A (2003) 138-145
10. Schneider R., Goes M., Henriques G., and Chan D. Tensile bond strength of dual curing resin-based cements to commercially pure titanium. Dental Materials 23 (2007) 81-87
11. 2-treated titanium plates. Dental Materials 21 (2005) 1087-1097
12. Tsuchimoto Y., Yoshida Y., Takeuchi M., Mine A., Yatani H., Tagawa Y., et al. Effect of surface pre-treatment on durability of resin-based cements bonded to titanium. Dental Materials 22 (2006) 545-552
13. Powers J., and Sakaguchi R. Craig's restorative dental materials. 12th ed. (2006), Mosby, Elsevier p. 479-511
14. Layton G.H., Driscoll C., and Hondrum S.O. The effect of luting agents on the retention and marginal adaptation of the CeraOne implant system. International Journal of Oral & Maxillofacial Implants 12 (1997) 660-665
15. Covey D.A., Kent D.K., St Germain Jr. H.A., and Koka S. Effects of abutments size and luting cement type on the uniaxial retention force of implant-supported crowns. Journal of Prosthetic Dentistry 83 (2000) 344-348
16. Koka S., Ewoldsen N.O., Dana C.L., and Beatty M.W. The effect of cementing agent and technique on the retention of a CeraOne gold cylinder: a pilot study. Implant Dentistry 4 (1995) 32-35
17. Vanzillotta P., Sader M., Bastos I., and Soares G. Improvement of in vitro titanium bioactivity by three different surface treatments. Dental Materials 22 (2006) 275-282
18. Forsten L. Short- and long-term fluoride release from glass ionomer and other fluoride-containing filling materials in vitro. Scandinavian Journal of Dental Research 98 (1990) 179-185
19. Forsten L. Fluoride release of glass ionomers. In: Hunt P. (Ed). Proceedings of the 2nd symposium on glass ionomer cements. Philadelphia (1994) 241-246
20. Van Noort R. Introduction to dental materials. 2nd ed. (2002), Mosby 68-140
21. Gladys S., van Meerbeek B., Braem M., Lambrechts P., and Vanherle G. Comparative physico-mechanical characterization of new hybrid restorative materials with conventional glass-ionomer and resin composite restorative materials. Journal of Dental Research 76 (1997) 883-894
22. Burgess J., Norling B., and Summitt J. Resin ionomer restorative materials: the new generation. Journal of Esthetic Dentistry 6 (1994) 207-215
23. DeGee A.J., van Duinen R.N.B., Werner A., and Davidson C.L. Early and long-term wear of conventional and resin-modified glass ionomers. Journal of Dental Research 75 (1996) 1613-1619
24. Wolfart M., Wolfart S., and Kern M. Retention forces and seating discrepancies of implant-retained castings after cementation. International Journal of Oral and Maxillofacial Implants 21 (2006) 519-525
25. Taira Y., Yanagida H., Matsumura H., Yoshida K., Atsuta M., and Suzuki S. Adhesive bonding of titanium with a thione-phosphate dual functional primer and self-curing luting agents. European Journal of Oral Sciences 108 (2000) 456-460
26. Ikemura K., Kouro Y., and Endo T. Effect of 4-acryloxyethyltrimellitic acid in a self-etching primer on bonding to ground dentin. Dental Materials Journal 15 (1996) 132-143
27. Matsumura H., Yoshida K., Tanaka T., and Atsuta M. Adhesive bonding of titanium with a titanate coupler and 4-META/MMA-TBB opaque resin. Journal of Dental Research 69 (1990) 1614-1616
28. Ohno H., Yamane Y., Endo K., Araki Y., and Iizuka R. Adhesion of adhesive resin to dental precious metal alloys. Part I. New precious metal alloys with base metals for resin bonding. Dental Materials Journal 17 (1998) 285-293
29. Kim H.M., Miyaji F., Kokubo T., and Nakamura T. Preparation of bioactive Ti and its alloys via simple chemical surface treatment. Journal of Biomedical Materials Research 32 (1996) 409-417
30. Beech D.R. Improvement in the adhesion of polyacrylate cements to human dentin. British Dental Journal 135 (1973) 442-445
31. Wilson A.D., Prosser H.J., and Powis D.R. Mechanism of adhesion of polyelectrolyte cements to hydroxyapatite. Journal of Dental Research 62 (1983) 590-592
32. Tanaka T., Fujiyama E., Shimazu H., Takaki A., and Atsuta M. Surface treatment of nonprecious alloys for adhesion-fixed partial dentures. Journal of Prosthetic Dentistry 55 (1986) 456-462
33. Goharian R., Maleknejad F., Salari T., Ghavamnasiri M., and Derhami M. Effect of adhesives on bond strength of porcelain veneer to base metal alloy. Quintessence International 33 (2002) 595-599
34. Sahmali S., Demirel F., and Saygili G. Comparison of in vitro tensile bond strengths of luting cements to metallic and tooth-colored posts. International Journal of Periodontics & Restorative Dentistry 24 (2004) 256-263