Modelling of chip separation in machining unidirectional FRP composites by stiffness degradation concept

Composites Science and Technology

Volumn 69, Issue 5, 2009, Pages 684-692

  Lasri, L ^a   Nouari, M ^b   El Mansori, M ^a  

^a ARTS ET MÉTIERS PARISTECH   (France)

^b NANCY UNIVERSITÉ   (France)

Author keywords

A. Glass fibers; B. Mechanical properties; B. Modelling; C. Failure criterion; C. Finite element analysis (FEA)

Indexed keywords

CARBON FIBER REINFORCED PLASTICS; DAMAGE DETECTION; DEGRADATION; FIBER REINFORCED PLASTICS; FIBERS; FINITE ELEMENT METHOD; GLASS; GLASS FIBERS; LAMINATES; MACHINING; MECHANICAL PROPERTIES; POLYMER MATRIX COMPOSITES; POLYMERIC GLASS; REINFORCED PLASTICS; STIFFNESS; STRUCTURE (COMPOSITION);

A. GLASS FIBERS; B. MECHANICAL PROPERTIES; B. MODELLING; C. FAILURE CRITERION; C. FINITE ELEMENT ANALYSIS (FEA);

QUALITY ASSURANCE;

COMPUTER SIMULATION; DAMAGE; DEGRADATION; FAILURE ANALYSIS; FIBER REINFORCED COMPOSITE; FINITE ELEMENT ANALYSIS; GLASS FIBER; MECHANICAL PROPERTY; STIFFNESS;

EID: 60049098997     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2009.01.004     Document Type: Article

References (32)

1. Smith W.F. Principles of material science and engineering. 2nd ed. (1990), McGraw-Hall, New York
2. Komanduri R. Machining of fibre-reinforced composites. Mach Sci Technol 1 1 (1997) 113-152
3. Konig W., Wulf C., Grab P., and Willerscheid H. Machining of fibre reinforced plastics. Ann CIRP 34 2 (1989) 537-548
4. Jahanmir S., Ramulu M., and Koshy P. Machining of ceramics and composites (1999), Marcel Dekker, Inc., New York
5. Lasri L., Nouari M., and El Mansori M. Working parameters effects on machining-induced damage of fibre-reinforced composites: numerical simulation analysis. Int J Mater Prod Technol 32 2-3 (2008) 136-151
6. Venu Gopala Rao G., Mahajan P., and Bhatnagar N. Micro-mechanical modelling of machining of FRP composites-cutting force analysis. Compos Sci Technol 67 3-4 (2007) 579-593
7. Koplev Aksel. Cutting of CFRP with single edge tool. In: Proceedings of third, international conference of composite materials, Paris; 1980.
8. Koplev A., Lystrup Aa., and Vorm T. Cutting process, chips, and cutting forces in machining CFRP. Composites 14 4 (1983) 371-376
9. Komanduri R. Machining of fibre reinforced composites. Mech Eng 115 4 (1993) 58-66
10. Davim J.P., and Reis P. Drilling carbon fibre reinforced plastics manufactured by autoclave experimental and statistical study. Mater Des 24 (2003) 315-324
11. Pwu H.Y., and Hocheng H. Chip formation model of cutting fibre-reinforced plastics perpendicular to fibre axis. Trans ASME 120 (1998) 104-114
12. Wang D.H., Ramulu M., and Arola D. Orthogonal cutting mechanisms of graphite/epoxy composite. Part I: unidirectional laminate. Int J Mach Tool Manuf 35 12 (1995) 1623-1638
13. Arola D., Ramulu M., and Wang D.H. Chip formation in orthogonal trimming of graphite/epoxy. Compos: Part A 27 (1996) 121-133
14. Arola D., and Ramulu M. Orthogonal cutting of fibre-reinforced composites: a finite element analysis. Int J Mach Tool Manuf 39 5 (1997) 597-613
15. Ramesh M.V., Seetharamu K.N., Ganesan N., and Sivakumar M.S. Analysis of machining of FRPs using FEM. Int J Mach Tool Manuf 38 12 (1998) 1531-1549
16. Arola D., Sultan M.B., and Ramulu M. Finite element modeling of edge trimming fiber reinforced plastics. J Manuf Sci E - T ASME 124 1 (2002) 32-41
17. Nayak D., Bhatnagar N., and Mahajan P. Machining studies of UD-FRP composites part 2: finite element analysis. Mach Sci Technol 9 4 (2005) 503-528
18. Zhao L.G., Warrior N.A., and Long A.C. Finite element modelling of damage progression in non-crimp fabric reinforced composite. Compos Sci Technol 66 (2006) 36-50
19. Chang F.-.K., and Lessard L.B. Damage tolerance of laminated composites containing an open hole and subject to compressive loadings: part I - analysis. J Compos Mater 25 (1991) 2-43
20. Tan S.C. A progressive failure model for composites laminates containing opening. J Compos Mater 25 5 (1991) 556-577
21. Dano M.-L., Gendron G., and Picard A. Stress and failure of mechanically fastened joints in composite laminates. Compos Struct 50 (2000) 287-296
22. Íçten B.M., and Karakuzu R. Progressive failure analysis of pin-loaded carbon-epoxy woven composite plates. Compos Sci Technol 62 (2002) 1259-1271
23. Ambur D.R., Jaunky N., Hilburger M., and Dávila C.G. Progressive failure analyses of compression-loaded composite curved panels with and without cutouts. Compos Struct 65 (2004) 143-155
24. Dano M.-L., Kamal E., and Gendron G. Analysis of bolted joints in composite laminates: strains and bearing stiffness predictions. Compos Struct (2006)
25. Zhao G.P., and Cho C.D. Damage initiation and propagation in composite shells subjected to impact. Compos Struct 78 1 (2007) 91-100
26. Akhras G., and Li W.C. Progressive failure analysis of thick composite plates using the spline finite strip method. Compos Struct 79 (2007) 34-43
27. Hibbit K.A.S. ABAQUS/standard version 6.6, theory, example problem and user's manuals (2006), ABAQUS Inc., Rhode Island USA
28. Wang X.M., and Zhang L.C. An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics. Int J Mach Tool Manuf 43 (2003) 1015-1022
29. Bhatnagar N., Nayak D., Singh I., Chouhan H., and Mahajan P. Determination of machining-induced damage characteristics of fibre reinforced plastic composite laminates. Mater Manuf Process 19 6 (2004) 1009-1023
30. Hashin Z.J. Appl Mech 47 (1980) 329
31. Zarco-Gonzalez J.C., Fellows N.A., and Dorodola J.F. A step-size independent method for finite element modelling of damage in composites. Compos Mater 21 (1987) 619-630
32. Ghidossi P., El Mansori M., and Pierron F. Influence of specimen preparation by machining on the failure of polymer matrix off-axis tensile coupons. Compos Sci Technol 66 11-12 (2006) 1857-1872