Machining of fiber-reinforced composites

Machining Science and Technology

Volumn 1, Issue 1, 1997, Pages 113-152

  Komanduri, Ranga ^a  

^a Oklahoma State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ABRASIVES; AEROSPACE APPLICATIONS; CERAMIC MATRIX COMPOSITES; FIBER REINFORCED MATERIALS; JETS; LASER APPLICATIONS; METALLIC MATRIX COMPOSITES; ORGANIC POLYMERS;

ABRASIVE WATER JET CUTTING; ELECTRICAL DISCHARGE MACHINING; ELECTROCHEMICAL SPARK MACHINING; LASER MACHINING; ULTRASONIC ASSISTED MACHINING; WATER JET;

MACHINING;

EID: 0031200051     PISSN: 10910344     EISSN: None     Source Type: Journal    
DOI: 10.1080/10940349708945641     Document Type: Review

References (54)

1. W. F. Smith, Principles of Material Science and Engineering, 2nd ed., McGraw-Hill, New York (1990).
2. P. J. E. Forsyth, "Fiber-Strengthened Materials" Composite Materials, A. Kelly, G. C. Smith, P. J. E. Forsyth, and A. J. Kennedy, Elsevier, (1966) 69-106.
3. R. Nicholls, Composite Construction Materials Handbook, Prentice Hall, Englewood Cliffs, NJ (1976).
4. T. H. Courtney, Mechanical Behavior of Materials, McGraw-Hill, New York (1990).
5. E. Scala, "Design and Performance of Fibers and Composites" Fiber Composite Materials, Seminar of the American Society of Metals, Oct. (1964).
6. R. W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, 4th ed., Wiley, New York (1996).
7. A. G. H. Dietz, International Science and Technology, 58 Aug. (1964).
8. A. Kelly, "The Nature of Composite Materials" Materials, A Scientific American Publication, W. H. Freeman and Co, San Francisco, CA (1967).
9. J. E. Gordon, The New Science of Strong Materials or Why You Don't Fall Through the Floor, Princeton University Press, Princeton, NJ (1976).
10. O. H. Wyatt and D. Dew-Hughes, Metals, Ceramics, and Polymers, Cambridge University Press, London (1975).
11. F. M. Garlasco, "Machining of Boron Fibrous Composites," American Society of Manufacturing Engineers (SME), TP EM 69-14 (1969).
12. B. J. Maclean and M. S. Misra, Mechanical Behavior of Metal-Matrix Composites, edited by J. E. Hack and M. F. Amateau, TMS-AIME (1983) 301.
13. W. Konig, C. Wulf, P. Grab, and H. Willerscheid, "Machining of Fiber Reinforced Plastics," Annals of CIRP, 34(2) (1989) 537-548.
14. J. A. Rideealgh, R. D. Rawlings, and D. R. F. West, "Laser Cutting of Glass Ceramic Matrix Composite," Materials Science and Technology, 6(April) (1990) 395-398.
15. J. H. Doran and C. R. Maikish, "Machining Boron Composites," Composite Materials in Engineering Design, edited by B. R. Norton, American Society for Metals (1972).
16. J. A. Boldt and J. P. Chanani, "Solid-Tool Machining and Drilling," American Society for Metals Int. Engineered Materials Handbook, Vol. 1: Composites (1987) 672.
17. R. W. Paige, "Milling Cutters for Composite Laminations," U.S. Patent 4,810,138 March 7 (1989).
18. K. R. Iaksson and G. K. Svahn, "Drill for Generating Holes in Workpiece," U.S. Patent 4,712,952, Dec. 15 (1987).
19. H. B. Barish, "Twist Drill," U.S. Patent 4,898,503, Feb. 6 (1950).
20. A. Di Ilio, V. Tagliaferri, and F. Veniali, "Cutting Mechanism in Drilling Aramid Composites," International Journal of Machine Tools and Manufacture, 31 (1991) 155-165.
21. Kevlar Cutting and Machining Handbook, E. I. du Pont de Nemours, Wilmington, De.
22. T. Beard, "Machining Composites - New Rules and Tools," Modern Machine Shop, April (1989) 74-85.
23. W. Schroder and W. Gaipl, "Turning of GPR Components with SYNDITE - Tests Indicate New Material's Potential," Industrial Diamond Review, Feb. (1979) 52-54.
24. A. Koplev, A. Lystrup, and T. Vorm, "The Cutting Process, Chip and Cutting Forces in Machining Composites," Composites, 14(4) (1983) 371-376.
25. C. A. Friend, R. U. Clyne, and G. G. Valentine, "Machining Graphite Composite Materials" in Composite Materials in Engineering Design edited by B. R. Norton. Proc. of the 6th St. Louis Symposium, ASM, May (1972) 217-224.
26. N. Bhatnagar, N. Ramakrishnan, N. K. Naik, and R. Komanduri, "On the Machining of Fiber Reinforced Plastic (FRP) Composite Laminates," Int. J. Mach. Tool. Manufact., 35(5) (1995) 701-716.
27. R. Komanduri, "Machining of Fiber Reinforced Composite," Mechanical Engineering, 115(4) (1993) 58-66.
28. C. W. Wern, M. Ramulu, and A. Shukla, "Investigation of Stresses in the Orthogonal Machining of Fiber-Reinforced Plastics," Experimental Mechanics, March (1996) 33-41.
29. D. Arola, M. Ramulu, and D. H. Wang, "Chip Formation in Orthogonal Trimming of Graphite/Epoxy Composite," Composites, 27A (1996) 121-133.
30. A. Di Ilio, V. Tagliaferri, and F. Veniali, "Specific Cutting Energy in Drilling of Composites," Proc. of the Symposium on Machining of Advanced Composites, edited by M. Ramulu and R. Komanduri, American Society of Mechanical Engineers, (MD-45/PED-66) (1993) 53-64.
31. G. Bella, F. Veniali, A. Di Ilio, and V. Tagliaferri, "A 2-D Model for Temperature Evaluation in Drilling," Proc. of the Symposium on Machining of Advanced Composites, edited by M. Ramulu and R. Komanduri, American Society of Mechanical Engineers, (MD-45/PED-66) (1993) 65-72.
32. H. Ho-Cheng and C. K. H. Dharan, "Delamination During Drilling in Composite Laminates," Proc. of the Conference on Machining Composites, Winter Annual Meeting, edited by M. Taya and M. Ramulu, American Society of Mechanical Engineers (PED-35/MD-12) (1988) 39-44.
33. Y. Hasegawa, S. Hanasaki, and S. Satanaka, "Characteristics of Tool Wear in Cutting of GFRP," Proc. of the 5th Int. Conf. on Production Engineering (Tokyo, Japan) (1984) 185-190.
34. M. Ramulu, M. Faridnia, J. L. Garbini, and J. E. Jorgensen, "Machining of Graphite/Epoxy Composite Materials with Polycrystalline Diamond (PCD) Tools," Journal of Engineering Materials and Technology, 113(Oct) (1991) 430-436.
35. H. Ho-Cheng and H. Y. Puw, "Machinability of Fiber-Reinforced Thermoplastics in Drilling," Journal of Engineering Materials and Technology, 115(Jan) (1993) 146-149.
36. J. Powell and I. A. Menzies, "Principles and Applications of Carbon Dioxide Laser Cutting," Proc. 2nd Conf. on Materials Eng., IMechE, London, UK, (1985) 205-213.
37. I. J. Spalding, "Characteristics of Laser Beams for Machining."
38. G. Caprino and V. Tagliaferri, "Maximum Cutting Speed in Laser Cutting of Fibre Reinforced Plastics," Int. J. of Machine Tool and Manufacture, 28(4) (1988) 389-398.
39. A. Dillio, V. Tagliaferri, and I. Crivelli Visconti, "Laser Cutting of Aramid FRP," Proc. of LAMP '87 (Oasaka, Japan) (1987) 291-296.
40. V. Tagliaferri, "Laser Cutting of Reinforced Materials" Handbook of Ceramics and Composites, Synthesis and Properties, Vol. 1, edited by N. P. Cheremisinoff, Marcel Dekker, New York, NY (1990) 451-467.
41. M. I. Cohen, "Material Processing" Laser Handbook, Vol. 2, edited by F. T. Arecchi and E. O. Schulz-Duboris, North-Holland, New York (1972) 1577-1647.
42. F. E. Sprow, "Cutting Composites: Three Choices for Any Budget," Tooling and Production, Dec. (1987) 44.
43. J. Korican, "Water-Jet and Abrasive Water-Jet Cutting," ASM Engineering Materials Handbook: Composites, Vol. 1, (1987) 673-675.
44. M. Hashish, "Machining of Advanced Composites with Abrasive-Water Jets," Manufacturing Review, 2(2) (1989) 142-150.
45. M. Ramulu and D. Arola, "Water Jet and Abrasive Water Jet Cutting of Unidirectional Granite/Epoxy Composite," Composites, 24 (1993) 299-308.
46. M. Hashish, "Precision Drilling of Composites with Abrasive Waterjets," Proc. of the Symposium on Machining of Advanced Composites, edited by M. Ramulu and R. Komanduri, American Society of Mechanical Engineers, (MD-45/PED-66) (1993) 217-226.
47. C. Martin, B. Cales, P. Vivier, and P. Mathieu, "Electrical Discharge Machinable Ceramic Composites," Materials Science and Engineering, A109 (1989) 351-356.
48. A. M. Gadella and Y.-M. Cheng, "Recent Developments in Electrical Discharge Machining," Proc. of the Symposium on Machining of Advanced Composites, edited by M. Ramulu and R. Komanduri, American Society of Mechanical Engineers, (MD-45/PED-66) (1993) 187-205.
49. V. K. Jain, S. Tandon, and P. Kumar, "Experimental Investigations into Electrochemical Spark Machining of Composites," Journal of Engineering for Industry, 112 (1990) 194-197.
50. V. K. Jain, P. Sreenivasa Rao, S. K. Choudhary, and K. P. Rajurkar, "Experimental Investigations into Traveling Wire Electrochemical Spark Machining (TW-ECSM) of Composites," Journal of Engineering for Industry, 113 (1993) 75-84.
51. M. F. Stanton and C. Wrench, "Mechanisms of Mesothelion Induction with Asbestos and Fibrous Glass," Journal of the National Cancer Institute, 48(3) (1972) 797-821.
52. A. Antonsson and S. Runmark, "Airborn Fibrous Glass and Dust Originating from Worked Reinforced Plastics," American Ind. Hyp. Ass. J., 48(8) (1987) 684-687.
53. D. J. Doyle and J. M. Kokosa, "Laser Processing of Kevlar: Hazardous Chemical By-Products," Proc. of LAMP '87 (Osaka, Japan) (1987) 285-289.
54. W. Konig and S. Tummenholler, "Technological and Industrial Safety Aspects in Milling FRPS," Proc. of the Symposium on Machining of Advanced Composites, edited by M. Ramulu and R. Komanduri, American Society of Mechanical Engineers, (MD-45/PED-66) (1993) 1-14.