Characterization of nanostructured WC-Co deposited by cold spraying

Proceedings of the International Thermal Spray Conference

Volumn , Issue , 2007, Pages 1011-1020

  Li, Chang Jiu ^a   Yang, Guan Jun ^a   Gao, Pei Hu ^a   Ma, Jian ^a   Wang, Yu Yue ^a   Li, Cheng Xin ^a  

^a XI'AN JIAOTONG UNIVERSITY   (China)

Author keywords

Annealing; Cold spray; Critical velocity; Microhardness; Nanocrystalline material; WC Co

Indexed keywords

COATINGS; ELECTRODEPOSITION; ELECTRON MICROSCOPY; HARDNESS; INORGANIC COATINGS; MICROHARDNESS; MICROSTRUCTURE; NANOCRYSTALLINE ALLOYS; NANOCRYSTALLINE MATERIALS; NANOCRYSTALLINE POWDERS; NANOSTRUCTURES; PESTICIDES; POWDERS; SCANNING ELECTRON MICROSCOPY; SINTERING; THERMAL SPRAYING; TUNGSTEN ALLOYS; VICKERS HARDNESS; VICKERS HARDNESS TESTING; X RAY DIFFRACTION ANALYSIS;

ANNEALING; COLD SPRAY; CRITICAL VELOCITY; NANOCRYSTALLINE MATERIAL; WC-CO;

TUNGSTEN CARBIDE;

EID: 59349097290     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (50)

1. C.-J. Li, A. Ohmori, and Y. Harada, Effect of Powder Structure on the Structurc of Thermally Sprayed WC-Co Coatings, J. Meter. Sri., 1996, 31, p. 785-794
2. H. Lovelock, Powder/Processing/Structure Relationships in WC-Co Thermal Spray Coatings: A Review of the Published Literature, J. Thermal Spray Technol., 1998, 7, p. 357-373
3. D.A. Stewart, P.H. Shipway, and D.G. McCartney, Abrasive Wear Behavior of Conventional and Nanocomposite HVOF-Sprayed WC-Co Coatings, Wear, 1999, 229, p. 789-798
4. M. E Vinayo, F. Kassabji, J. Guyonnet, and P. Fauchais, Plasam Sprayed WC-Co Coatings: Influence of Spray Conditions (Atmospheric and Low Pressure Plasma Spraying) on the Crystal Structure, Porosity, and Hardness, J. Vac. Sci. Technol. A, 1985, 3, p. 2483-2489
5. J. Subrahmanyam, M.P. Srivastava, and R. Sivakumar, Characterization of Plasma-Sprayed WC-Co Coatings, Mater. Sci. Eng., 1986, 84, p. 209-214
6. S, Rangaswamy and H, Herman, Metallurgical Characterization of Plasma Sprayed WC-Co Coatings, Advances in Thermal Spraying (Proceedings of 11th International Thermal Spray Conference), September 8-12, 1986 (Montreal, Canada), Welding Institute of Canada, Pergamon Press Canada Ltd., 1986, p. 101-110
7. 3, WC-Co) Properties on Aluminium or Steel Substrates, Mater. Sci. Eng., 1987, 92, p. 133-144
8. V. Ramnnath and N. Jayaraman, Characterization and Wear Performance of Plasma Sprayed WC-Co Coatings, Mater. Sci. Technol., 1989, 5, p. 382-388
9. G. Barbezat, E. Muller, and B. Walser, Applying Tungsten Carbide Cobalt Coatings by High Velocity Combustion Spraying, Sulzer Tech. Rev., 1988, 4, p. 27-33
10. H. Kreye, D. Fandrich, H.-H. Muller, and G. Reiners, Microstructure and Bond Strength of WC-Co Coatings Deposited by Hypersonic Flame Spraying (Jet-Kote Process), Advances in Thermal Spraying (Proceedings of 11th International Thermal Spray Conference), September 8-12, 1986 (Montreal, Canada), Welding Institute of Canada, Pergamon Press Canada Ltd., 1986, p. 121-128
11. H. Nakahira, Y. Harada, and K. Tani, Properties of Tungsten Cermet Coatings by High Energy Flame Spraying, Proceedings of International Symposium on Advanced Thermal Spray Technology and Allied Coatings, A. Ohmori, Ed., May 13-15, 1988 (Osaka, Japan), Japan High Temperature Society, 1988, p. 79-88
12. C.-J. Li, A. Ohmori, and Y. Harada, Formation of an Amorphous Phase in Thermally Sprayed WC-Co, J. Thermal Spray Technol., 1996, 5(1), p. 69-73
13. Y. Ishikawa, J. Kawakita, S. Osawa, T. Itsukaichi, Y. Sakamoto, M. Takaya, and S. Kuroda, Evaluation of Corrosion and Wear Resistance of Hard Cermet Coatings Sprayed by Using an Improved HVOF Process, J. Thermal Spray Technol., 2005, 14(3), p. 384-395
14. C.-J. Li, Y.-Y. Wang, G.-J. Yang, A. Ohmori, and K. A. Khor, Effect of Solid Carbide Particle Size on Deposition Behavior, Microstructure and Wear Performance of HVOF Cermet Coatings, Mater. Sci. Technol., 2004, 20, p. 1087-1096
15. V. Richter and M.V. Ruthendorf, On Hardness and Toughness of Ultrafine and Nanocrystalline Hard Materials, Int. J. Refractory Met. Hard Mater., 1999, 17, p. 141-152
16. K. Jia and T.E. Fischer, Abrasion Resistance of Nanostructured and Conventional Cemented Carbides, Wear, 1996, 200, p. 206-214
17. J.H. He, M. Ice, S. Dallek, and E.J. Lavernia, Synthesis of Nanostructured WC-12 pct Co Coating Using Mechanical Milling and High-Velocity Oxygen Fuel Thermal Spraying, Metall. Mater. Trans. A, 2000, 31, p. 541-553
18. D.A. Steward, P.H. Shipway, and D.G. McCartney, Microstructural Evolution in Thermally Sprayed WC-Co Coatings: Comparison Between Nanocomposite and Conventional Starting Powders, ACTA Mater., 2000, 48, p. 1593-1604
19. Y.F. Qiao, Y.R. Liu, and T.E. Fischer (USA), Sliding and Abrasive Wear Resistance of Thermal-Sprayed WC-CO Coatings, J. Thermal Spray Technol., 2001, 10, p. 118-125
20. J.H. He, L. Ajdelsztajn, and E.J. Lavernia, Thermal Stability of Nanocrystalline WC-Co Powder Synthesized by Using Mechanical Milling at Low Temperature, J. Mater. Res., 2001, 16, p. 478-488
21. J.H. He, Y.R. Liu, Y.F. Qiao, T.E. Fischer, and E.J. Lavernia, Near-Nanostructured WC-18 pct Co Coatings with Low Amounts of Non-WC Carbide Phase. Part I. Synthesis and Characterization, Metall. Mater. Trans. A, 2002, 33, p. 145-157
22. Z.G. Ban and L.L. Shaw, Synthesis and Processing of Nanostructured WC-Co Materials, J. Mater. Sci., 2002, 37, p. 3397-3403
23. Z.G. Ban and L.L. Shaw, Characterization of Thermal Sprayed Nanostructured WC-Co Coatings Derived from Nanocrystalline WC-18 wt.%Co Powders, J. Thermal Spray Technol., 2003, 12, p. 112-119
24. Y-.Y. Wang, C.-J. Li, J. Ma, and G.-J. Yang, Effect of Flame Conditions on the Abrasive Wear Performance of HVOF Sprayed Nanostructured WC-12Co Coatings, Trans. Nonferrous Met. Soc. China, 2004, 14(special 2), p. 72-76
25. J.H. He and J.M. Schoenung, Nanostructured Coatings, Mater. Sci. Eng. A, 2004, 336, p. 274-319
26. P.H. Shipway, D.G. McCartney, and T. Sudaprasert, Sliding Wear Behaviour of Conventional and Nanostructured HVOF Sprayed WC-Co Coatings, Wear, 2005, 259, p. 820-827
27. J.M Guilemany, S. Dosta, J. Nin, and J.R. Miguel, Study of the Properties of WC-Co Nanostructured Coatings Sprayed by High-Velocity Oxyfuel, J Thermal Spray Technol., 2005, 14(3), p. 405-413
28. C. Bartuli, T. Valente, F. Cipri, E. Bemporad, and M. Tului, Parametric Study of an HVOF Process for the Deposition of Nanostructured WC-Co Coatings, J. Thermal Spray Technol., 2005, 14(2), p. 187-195
29. B.R. Marple and R. S. Lima, Process Temperature/Velocity-Hardness-Wear Relationship for High-Velocity Oxyfuel Sprayed Nanostructured and Conventional Cermet Coatings, J. Thermal Spray Technol., 2005, 14(1), p. 67-76
30. J. O. Berghaus, B. Marple, and C. Moreau, Suspension Plasma Spraying of Nanostructured WC-12Co Coatings, J. Thermal Spray Technol., 2006, 15(4), p. 676-681
31. Y.-C. Zhu, K. Yukimura, C.-X. Ding, and P.-Y. Zhang, Tribological Properties of Nanostructured and Conventional WC-Co Coatings Deposited by Plasma Spraying, Thin Solid Films, 2001, 388, p. 277-282
32. G. Skandan, R. Yao, R. Sadangi, B.H. Kear, Y. Qiao, L. Liu, and T.E. Fischer, Multimodal Coatings: A New Concept in Thermal Spraying, J. Thermal Spray Technol., 2000, 9(3), p. 329-331
33. D.A. Ateward, H.P. Shipway, and D.C. McCartney, Abrasive Wear Behaviour of Conventional And Nanocomposite HVOF-Sprayed WC-Co Coatings, Wear, 1999, 225-229, p. 789-798
34. C.-J. Li and A. Ohmori, Relationship Between the Structure and Properties of Thermally Sprayed Deposits, J. Thermal Spray Technol., 2002, 11, p. 365-374
35. C.-J. Li, W.-Y. Li, W.-H. Ma, and H. Fukanuma, Characterization of Microstructure of Nanostructured Fe-Si Coating Deposited by Cold Spraying, Thermal Spray 2004: Advances in Technology and Application, May 10-12, 2004 (Osaka, Japan), DVS, 2004, p. 371-377
36. H.-T. Wang, C.-J. Li, G.-J. Yang, and C.-X. Li, Formation of Fe-Al Intermetallic Compound Coating Through Cold Spraying, Building on 100 Years of Success: Proceedings of the 2006 International Thermal Spray Conference, B.R. Marple, M.M. Hyland, Y.C. Lau, R.S. Lima, and J. Voyer, Eds., May 15-18, 2006 (Seattle, WA, USA), ASM International, 2006
37. H.-T. Wang, C.-J. Li, G.-J. Yang, C.-X. Li, and Q. Zhang, Microstructural Characterization of Cold-sprayed FeAl Intermetallic Compound Coatings, J. Thermal Spray Technol., 2007, in this issue
38. Q. Zhang, C.-J. Li, C.-X. Li, G.-J. Yang, and X.-R. Wang, Preliminary Study of Oxidation Behavior of Cold Sprayed Nanostructure NiCrAlY Bond Coatings, Global Coating Solutions: Proceedings of the 2007 International Thermal Spray Conference, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Eds., May 14-16, 2007 (Beijing, China), ASM International, 2007
39. L. Ajdelsztajn, A. Zuniga, B. Jodoin, and E.J. Lavernia, Cold-Spray Processing of a Nanocrystalline Al-Cu-Mg-Fe-Ni Alloy with Sc, J. Thermal Spray Technol., 2006, 15, p. 184-190
40. R.S. Lima, J. Karthikeyan, CM. Kay, J. Lindemann, and C.C. Berndt, Microstructural Characteristics of Cold-sprayed Nanostructured WC-Co Coating, Thin Solid Films, 2002, 416, p. 129-135
41. H.-J. Kim, C.-H. Lee, and S.-Y. Hwang, Superhard Nano WC-12%Co Coating by Cold Spray Deposition, Mater. Sci. Eng. A, 2005, 391, p. 243-248
42. H.-J. Kim, C.-H. Lee, and S.-Y. Hwang, Fabrication of WC-Co Coatings by Cold Spray Deposition, Surf. Coat. Technol., 2005, 191, p. 335-340
43. C.-J. Li and W.-Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surf. Coat. Technol., 2003, 167, p. 278-283
44. C.-J. Li, W.-Y. Li, and H.-L. Liao, Examination of the Critical Velocity for Deposition of Particles in Cold Spraying, J. Thermal Spray Technol., 2006, 15, p. 212-222
45. C.-J. Li, W.-Y. Li, Y.-Y. Wang, G.-J. Yang, and H. Fukanuma, A Theoretical Model for Prediction of Deposition Efficiency in Cold Spraying, Thin Solid Films, 2005, 489, p. 79-85
46. C.-J. Li and W.-Y. Li, Optimization of Spray Conditions in Cold Spraying based on the Numerical Analysis of Particle Velocity, Trans. Nonferrous Met. Soc. China, 2004, 14(special 2), p. 43-48
47. S.-Q. Fan, G.-J. Yang, G.-J. Liu, C.-X. Li, C.-J. Li, and L.-Z. Zhang, Characterization of Microstructure of Ti02 Coating Deposited by Vacuum Cold Spraying, J. Thermal Spray Technol., 2005, 15(4), p. 613-517
48. J. He and J. M. Schoenung, A Review on Nanostructured WC-Co Coatings, Surf. Coat. Technol., 2002, 157, p. 72-79
49. Y. Qiao, T. E. Fischer, and A. Dent, The effects of Fuel Chemistry and Feedstock Powder Structure on the Mechanical and Tribological Properties of HVOF Thermal-Sprayed WC-Co Coatings with Very Fine Structure, Surf. Coat. Technol., 2003, 172, p. 24-41
50. D.A. Atewart, P.H. Shipway, and D.G. McCartney, Influence of Heat Treatment on the Abrasive Wear Behavior of HVOF Sprayed WC-Co Coatings, Surf. Coat. Technol., 1998, 105, p. 13-24