Synthesis of Nanostructured WC-12 Pet Co Coating Using Mechanical Milling and High Velocity Oxygen Fuel Thermal Spraying

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 31, Issue 2, 2000, Pages 541-553

  He, Jianhong ^a,b   Ice, Michael ^a   Dallek, Steven ^a   Lavernia, Enrique J ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b NAVAL SURFACE WARFARE CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

MICROHARDNESS; MILLING (MACHINING); NANOSTRUCTURED MATERIALS; PROTECTIVE COATINGS; SCANNING ELECTRON MICROSCOPY; SINTERING; SPRAYED COATINGS; SYNTHESIS (CHEMICAL); THERMOGRAVIMETRIC ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; X RAY ANALYSIS;

HIGH VELOCITY OXYGEN FUEL (HVOF) THERMAL SPRAYING;

COBALT;

EID: 0033888214     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-000-0289-6     Document Type: Article

References (53)

1. S. Rangaswamy and H. Herman: Advances in Thermal Spraying, Pergamon Press, Elmsford, NY, 1986, pp. 101-10.
2. D. Tu, S. Chang, C. Chao, and C. Lin: J. Vac. Sci. Technol., 1985, vol. A3, pp. 2479-82.
3. L. Moskowitz and K. Trelewicz: J. Thermal Spray Technol., 1997, vol. 6, pp. 294-99.
4. D.J. Nolan and M. Samandi: J. Thermal Spray Technol, 1997, vol. 6, pp. 422-24.
5. H.L. de Villiers Lovelock, P.W. Richer, J.M. Benson, and P.M. Young: J. Tliermal Spray Technol., 1998, vol. 7, pp. 97-107.
6. C.J. Li, A. Ohmori, and Y. Harada: J. Mater. Sei., 1996, vol. 31, pp. 785-94.
7. J. Subrahmanyam, M.P. Srivastava, and R. Sivakumar: Mater. Sei. Eng., 1986, vol. 84, pp. 209-14.
8. J.E. Nerz, B.A. Kushner, and A.J. Rotolico: J. Thermal Spray Technol., 1992, vol. 1, pp. 147-52.
9. A. Karimi, C. Verdon, and G. Barbezat: Surf. Coating Technol., 1993, vol. 57, pp. 81-89.
10. C.J. Li, A. Ohmori, and Y. Harada: J. Tliermal Spray Technol., 1996, vol. 5, pp. 69-73.
11. W.J. Jarosinski, M.F. Gruninger, and C.H. Londry: in Thermal Spray Coatings: Research, Design and Applications, C.C. Bemdt and T.F. Bernecki, eds., ASM INTERNATIONAL, Materials Park, OH, 1993, pp. 153-57.
12. K. Niemi, P. Vuoristo, and T. Mantyla, G. Barbezat, and A.R. Nicoll: in Thermal Spray: International Advances in Coatings Technology, C.C. Bemdt, ed., ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 655-89.
13. H.L. de Villiers Lovelock: J. Thermal Spray Technol., 1998, vol. 7, pp. 357-73.
14. V. Ramnath and N. Jayaraman: Mater. Sei. Technol., 1989, vol. 5, pp. 389-88
15. HJ. Kirn, Y.G; Kweon, and R.W. Chang: J. Thermal Spray Technol., 1994, vol. 3, pp. 169-78.
16. D.J. Varacalle, Jr., E. Acosta, J. Figert, M. Syma, J. Worthington, and D. Carrillo: in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM INTERNATIONAL, Materials Park, OH, 1996, pp. 699-707.
17. J.E. Nerz, B.A. Kushner, and A.J. Rotolico: in Protective Coatings: Processing and Characterization, R.M. Yazici, ed., TMS, Warrendale, PA, 1990, pp. 133-43.
18. S.Y. Hwang, E.G. Seong, and M.C. Kim: Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM INTERNATIONAL, Materials Park, OH, 1996, pp. 107-12.
19. S.F. Wayne and S. Sampath: J. Thermal Spray Technol., 1992, vol. 1, pp. 307-15.
20. J. Nutting, J.M. Guilemay, and Z. Dong: Mater. Sei. Technol., 1995, vol. II, pp. 961-66,
21. K. Jia, T.E. Fischer, and B. Gallois: Nanostr. Mater, 1998, vol. 10, pp. 875-91.
22. M.L. Lau, H.G. Jiang, W. Nuchter, and E.J. Lavernia: Phys. Status Solidi (a), 1998, vol. 166, pp. 257-68.
23. E.J. Lavernia, M.L. Lau, and H.G. Jiang: in Thermal Spray Processing of Nanocrystalline Materials, Nanostmctured Materials, G.M. Chow and N.I. Noskova, eds., Kluwer Academic Publishers, Hingham, MA, 1998, pp. 283-302.
24. D.J. Varacalle, G.R. Smolik, G.G. Wilson, G. Irons, and A. Walter: in Protective Coatings: Processing and Characterization, R.M. Yazici, ed., TMS, Warrendale, PA, 1990, pp. 121-34.
25. S.V. Nagender Naidu, A.M. Sriramamurthy, and P. Pama Rao: in Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1990, p. 1258.
26. W. Schedler: Hartmetall fur den Praktiker, VDI-Verlag, Duesseldorf, 1988, pp. 5-29 (in German).
27. G.B. Olson and Morris Cohen: Metall. Trans. A, 1976, vol. 7A, pp. 1897-1904.
28. B.D. Cullity: Elements of X-ray Diffraction, 2nd ed., Addison-Wesley Publishing Company, Inc., Reading, MA, 1978, p. 521.
29. H.P. Klug and L.E. Alexander: X-Ray Diffraction Procedures, John Wiley & Sons, Inc., 1966, p. 138
30. J.M. Cowley: in Electron Diffraction Techniques, J.M. Cowley, ed., Oxford University Press, Oxford, United Kingdom, 1992, vol. 1, p. 49.
31. J.M. Guilemay, J. Nutting, and J.M. de Paco: Proc. 4th Eur. Conf. Advanced Materials Processing, Venice, Sept. 25-28, 1995, Association Italiana di Metallurgica, Milan, 1996, pp. 395-98.
32. B.H. Kear and L.E. McCandlish: Nanostr. Mater., 1993, vol. 3, pp. 19-30.
33. D.A. Stewart, P.H. Shipway, and D.G. McCartney: Wear, 1999, vols. 225-229, pp. 789-98.
34. Vikas V. Gupta, Maggy L. Lau, and Enrique J. Lavernia: University of California, Irvine, CA, unpublished research, 1999.
35. H. Ito, R. Nakamura, A. Bunya, and M. Kitoh: in Thermal Spray: International Advances in Coatings Technology, C.C. Berndt, ed., ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 93-98.
36. T.C. Nerz, J.E. Nerz, B.A. Kushner, A.J. Rotolico, and W.L. Riggs: in Thermal Spray: International Advances in Coatings Technology, C.C. Berndt, ed., ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 405-14.
37. T.P. Slavin and J. Nerz: in Thermal Spray Research and Applications, T.F. Bernecki, ed., ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 159-64.
38. M. Scholl, M. Becker, and D. Atteridge: in Thermal Spray Processing of Nanoscale Materials - A Conference Report with Extended Abstracts, C.C. Berndt and E.J. Lavernia, eds.; J. Thermal Spray technol, 1998, vol. 7, pp. 425-26.
39. J.R. Fincke, W.D. Swank, and D.C. Haggard: in Thermal Spray Industrial Applications, C.C. Bemdt and S. Sampath, eds., ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 325-30.
40. H. Herman: "Powder and Coating Characteristics for a Number of Nanostructured WC-Co Cements," 1998 Interim Report of ONR Advanced Coating Technology Development (ACTD) Program, 1998.
41. P.R. Strutt: in Thermal Spray Processing of Nanoscale Materials - A Conference Report with Extended Abstracts, C.C. Berndt and E.J. Lavernia, eds.; J. Thermal Spray Technol., 1998, vol. 7, pp. 413-14.
42. X.D. Liu, M. Nagumo, and M. Umemoto: Mater. Trans., JIM, 1997, vol. 38, pp. 1033-39.
43. C. Suryanarayana, D. Mukhopadhyay, S.N. Patankar, and F.H. Froes: J. Hater. Res., 1992, vol. 7, pp. 2114-17.
44. D.A. Konstantinidis and E.G. Aifantis: Nanostr. Mater., 1998, vol. 10, pp. 1111-18.
45. Handbook of Chemistry and Physics, 70th ed., R.C. Weast, ed., CRC Press Inc., Boca Raton, FL, 1989-1990, p. C-303.
46. Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1990, p. 896.
47. T. Johansson and B. Uhrenius: Met. Sei., 1978, vol. 57, p. 83.
48. K. Ishida and T. Nishizawa: in Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1990, p. 836.
49. Karimi, C. Verdon, and G. Barbezat: Surf. Coating Technol, 1993, vol. 57, pp. 13-23.
50. S. Usmani, S. Sampath, and H. Herman: in Thermal Spray Processing of Nanoscale Materials - A Conference Report with Extended Abstracts, C.C. Berndt and E.J. Lavemia, eds.; J. Tliennal Spray Technol, 1998, vol. 7, pp. 429-31.
51. A. Inoue, Y. Horio, Y.H. Kirn, and T. Masumoto: Mater. Trans. JIM, 1992, vol. 33, pp. 669-74.
52. I.V. Alexandrov, Y.T. Zhu, T.C. Lowe, P.K. Islamgaliev, and R.Z. Valiev: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2253-60.
53. T.R. Malow and C.C. Koch: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2285-95.