High speed grinding of advanced ceramics: A review

Key Engineering Materials

Volumn 404, Issue , 2009, Pages 11-22

  Huang, H ^a  

^a UNIVERSITY OF QUEENSLAND   (Australia)

Author keywords

Ceramics; Coolant supply; Force; High speed grinding; Subsurface; Temperature

Indexed keywords

ALUMINA; ALUMINUM OXIDE; CERAMIC MATERIALS; GRINDING (MACHINING); SILICON CARBIDE; TITANIUM DIOXIDE; ZIRCONIA;

ADVANCED CERAMICS; ALUMINA - TITANIA; CERAMIC; COOLANT SUPPLY; FORCE; HIGH SPEED GRINDING; MATERIAL REMOVAL MECHANISMS; SUBSURFACE;

SILICON NITRIDE;

EID: 59049098603     PISSN: 10139826     EISSN: 16629795     Source Type: Book Series    
DOI: 10.4028/www.scientific.net/kem.404.11     Document Type: Article

References (45)

1. S. Jahanmir, M. Ramulu, P. Koshy: Machining of Ceramics and Composites, New York, Marcel Dekker, 1999.
2. Marinescu, H.K. Tonshöff and I. Inasaki: Handbook of Ceramic Grinding and Polishing, Noyes Publications/William Andrew Publishing LLC, New York, 2000.
3. I. Inasaki: Grinding of Hard and Brittle Materials, Annals of CIRP, Vol. 36 (1987), pp.463-471.
4. S. Malkin, and T.W. Hwang: Grinding Mechanisms for Ceramics. Annals of CIRP, Vol. 45 (1996), pp.569-580.
5. H.K. Tonshöff, T. Lierse, and I. Inasaki: Grinding of Advanced Ceramics, in Machining of Ceramics and Composites, ed. S. Jahanmir, M. Ramulu and P. Koshy, New York: Marcel Dekker, 1999, pp.855-118.
6. H.H.K. Xu, and S. Jahanmir: Microstructure and Material Removal in Scratching of Alumina, Journal of Materials Science, Vol.30 (1995), pp.2335-2247.
7. T.W. Hwang and S. Malkin: Grinding Mechanisms and Energy Balance for Ceramics, Transaction of ASME: Journal of Manufacturing Science and Engineering, Vol.121 (1999), pp.623-631.
8. S. Kohli, C. Guo and S. Malkin: Energy Partition to the Workpiece for Grinding with Aluminum Oxide and CBN Abrasive Wheels, Transactions of the ASME: Journal of Engineering for Industry, Vol.117 (1995), pp. 160-168.
9. T.G. Bifano, T.A. Dow and R.O. Scattergood: Ductile-regime: a New Technology for Machining Brittle Materials, Transaction of ASME: Journal of Engineering for Industry, Vol.113 (1991), pp.184-189.
10. K.L. Blaedel, I.S. Taylor and C.J. Evans: Ductile-regime Grinding of Brittle Materials, in Machining of Ceramics and Composites, ed. S. Jahanmir, M. Ramulu and P. Koshy, New York: Marcel Dekker, 1999, pp.139-176.
11. A.G. Evans and D.B. Marshall: Wear Mechanisms in Ceramics, Fundamental of Friction and Wear of Materials, ed. D.A. Rigney, Metals Park, Ohio, American Society for Metals, 1981, pp.439-452.
12. R. Komandury: On the Material Removal Mechanisms in Finishing of Advanced Ceramics and Glasses, Annals of C1RP, Vol.45 (1996), pp.509-513.
13. X.P. Xu: Experimental Study on Temperatures and Energy Partition at the Diamond-Granite Interface in Grinding, Tribology International, Vol. 34 (2001), pp.419-426.
14. Y. Ichida, and K. Kishi: Nanotopography of Ultraprecise Ground Surface of Fine Ceramics Using Atomic Force Microscope, Annals of CIRP, Vol. 42 (1993), pp.647-650.
15. S. Jahanmir, H.H.K. XU and L.K. Ives: Mechanisms of Materials Removal in Abrasive Machining, in Machining of Ceramics and Composites, eds. S. Jahanmir, M. Ramulu, P. Koshy, New York: Marcel Dekker, 1999, pp. 11 -84.
16. F. Klocke, E. Brinksmeier, C. Evans, T. Howes, I. Inasaki, E. Minke, H.K. Tonshöff, J.A. Webster and D. Stuff: High Speed Grinding - Fundamentals and State of the Art in Europe, Japan and the USA, Annals of CIRP, Vol.46 (1997), pp.715-724.
17. F. Klocke. E. Verlemann and C. Schippers: High-Speed Grinding of Ceramics, in Machining of Ceramics and Composites, ed. S. Jahanmir, M. Ranlulu, P. Koshy, New York: Marcel Dekker, 1999, pp. 119-138.
18. J. Kajornchaiyakul: Abrasive Machining of Ceramics: Assessment of Near-Surface Characteristics in High Speed Grinding, PhD Thesis. University of Connecticut, 2000.
19. Inasaki. High Efficiency Grinding of Advanced ceramics, Annals of CIRP, Vol.35 (1986), pp.211-214.
20. T.W. Hwang, C.J. Evans and S. Malkin: An Investigation of High Speed Grinding with Electroplated Diamond Wheels, Annals of CIRP, Vol.49 (2000), pp.245-248.
21. T.W. Hwang, C.J. Evans and S. Malkin: High Speed Grinding of Silicon Nitride with Electroplated Diamond Wheels, Part 2: Wheel Topography and Grinding Mechanisms, Transaction of ASME: Journal of Manufacturing Science and Engineering, Vol.122 (2000), pp.42-50.
22. K. Ramesh, S.H. Yeo, S. Gowri and L. Zhou: Experimental Evaluation of Super High Speed Grinding of Advanced Ceramics, Journal of Advanced Manufacturing Technology, Vol.17 (2001), pp.87-92.
23. K. Inoue, Y. Sakai, K. Ono and Y. Watanabe: Super High Speed Grinding for Ceramics with Vitrified Diamond Wheel, International Journal of Japan Society for Precision Engineering, Vol.28 (1994), pp.344-345.
24. L. Yin and H. Huang: Ceramic Response to High Speed Grinding, Machining Science and Technology, Vol. 8 (2004), pp.21-37.
25. H. Huang, L. Yin and L. Zhou: High Speed Grinding of Silicon Nitride with Resin Bond Diamond Wheels, Journal of Materials Processing Technology, Vol.141 (2003), pp.329-336.
26. H. Huang and L. Yin: Grinding Characteristics of Engineering Ceramics in High Speed Regime, International Journal of Abrasive Technology, Vol.1 (2007), pp.78-93.
27. L. Yin, H. Huang, K. Ramesh and T. Huang: High Speed Versus Conventional Grinding in High Removal Rate Machining of Alumina and Alumina-Titania, International Journal of Machine Tools and Manufacture, Vol.45 (2005), pp.897-907.
28. th International Grinding Conference, Society of Manufacturing Engineers, Cincinnati, Ohio, 1993, MR93-352.
29. H. Huang, Machining Characteristics and Surface Integrity of Yttria Stabilized Tetragonal Zirconia in High Speed Deep Grinding, Materials Science and Engineering A, Vol.345 (2003), pp.155-163.
30. H. Huang and Y.C. Liu. Experimental Investigations of Machining Characteristics and Removal Mechanisms of Advanced Ceramics in High Speed Deep Grinding, International Journal of Machine Tools & Manufacture, Vol.43 (2003), pp.811-823.
31. G.Z. Xie, H.W. Huang, H. Huang, X.M. Sheng, H.Q. Mi and W. Xiong: Experimental Investigations of Advanced Ceramics in High Efficiency Deep Grinding, Chinese Journal of Mechanical Engineering, Vol.43 (2007), pp. 176-184.
32. F. Klocke and A. Baus: Coolant Induced Forces in CBN High Speed Grinding with Shoe Nozzles, Annals of CIRP, Vol.49 (2000), pp.241-244.
33. H Huang, S. Kanno, X.D. Liu and Z.M. Gong: Highly Integrated and Automated High Speed Grinding System for Printer Heads Constructed by Combination Materials, International Journal of Advanced Manufacturing Technology, Vol.25 (2005), pp.1-9.
34. K. Ramesh, H. Huang and L. Yin: Analytical and Experimental Investigation of Coolant Velocity in High Speed Grinding, International Journal of Machine Tools and Manufacture, Vol.44 (2004), pp.1069-1076.
35. A.D. Batako, W.B. Rowe and M.N. Morgan: Temperature Measurement in High Efficiency Deep Grinding, International Journal of Machine Tools & Manufacture, Vol. 45 (2005), pp.1231-1245.
36. W.B. Rowe: Thermal Analysis of High Efficiency Deep Grinding, International Journal of Machine Tools & Manufacture, Vol. 41 (2001), pp.1-19.
37. W.B. Rowe and T. Jin: Temperatures in High Efficiency Deep Grinding, Annals of the CIRP, Vol.50 (2001), pp.205-208.
38. T. Jin, W.B. Rowe and D. McCormack: Temperatures in Deep Grinding of Finite Workpieces, International Journal of Machine Tools & Manufacture. Vol. 42 (2002), pp.53 -59.
39. T. Jin and G.Q. Cai, Analytical Thermal Model of Oblique Moving Heat Source for Deep Grinding and Cutting, Transaction of ASME, Journal of Manufacturing Science and Engineering, Vol.123 (2001), pp.185-190.
40. G.Z. Xie and H. Huang: An Experimental Investigation of Temperature in High Speed Deep Grinding of Partially Stabilized Zirconia, International Journal of Machine Tool and Manufacture, (2008) doi:10.1016/j.ijmachtools.2008.06.002
41. H.H.K. Xu and S. Jahanmir, Simple technique for observing subsurface damage in machining of ceramics, Journal of American Ceramic Society, 77 (1994), 1388-1390.
42. A.G. Evans and D.B. Marshall: Wear Mechanisms in Ceramics, in Fundamental of Friction and Wear of Materials, ed. D.A. Rigney, Metals Park, Ohio: American Society for Metals, 1981, pp.439-452.
43. H. Huang: Effect of Truing/Dressing Intensity on Truing/Dressing Efficiency and Grinding Performance of Vitrified Diamond Wheels, Journal of Materials Processing Technology, Vol.117 (2001), pp.9-14.
44. H. Huang, Z.T. Shang, H.Q. Mi, X.M. Sheng, S.Q. Wang, Y. Wu and G.Z. Xie: The Closed Y-type Nozzle for Ultrahigh Speed Grinding China Patent, CN200520052869.7.
45. Z.T. Shang, H. Huang, Q. Tang and S.H. Yin: Coolant Effect on Grinding Performance in High Speed Deep Grinding of 40Cr steel, Journal of Metal Finishing, Vol.106 (2008), pp. 16-21.