Computational modeling and analysis of textile composites: Accomplishments and challenges

International SAMPE Symposium and Exhibition (Proceedings)

Volumn 52, Issue , 2008, Pages

  Bogdanovich, Alexander E ^a  

^a 3TEX Inc   (United States)

Author keywords

Braiding; Computational modeling; Fabric geometry; Property averaging; Structural analysis; Textile composite; Weaving

Indexed keywords

CARBON FIBER REINFORCED PLASTICS; COMPUTATIONAL GEOMETRY; FABRICS; MATERIALS; TEXTILE INDUSTRY; TEXTILE PROCESSING; TEXTILES; THREE DIMENSIONAL; WEAVING;

BRAIDING; COMPUTATIONAL MODELING; FABRIC GEOMETRY; PROPERTY AVERAGING; TEXTILE COMPOSITE;

STRUCTURAL ANALYSIS;

EID: 57649110243     PISSN: 08910138     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (79)

1. Tarnopol'skii, Yu.M., Zhigun, I.G., and Polyakov, V.A., Spatially Reinforced Composites, Technomic, 1992 (Russian edition published in 1987).
2. Tsu-Wei Chou, Microstructural Design of Fiber Composites, Cambridge Solid State Science Series, 1992.
3. Bogdanovich, A.E. and Pastore, C.M., Mechanics of Textile and Laminated Composites, Chapman & Hall, 1996.
4. Tong, L., Mouritz, A.P., and Bannister, M.K., 3D Fibre Reinforced Polymer Composites, Elsevier, 2002.
5. Ko, F.K., Chapter 5 in Textile Structural Composites, Composite Materials Series, Vol. 3, Tsu-Wei Chou and Frank K. Ko (Eds.), Elsevier, 1989, pp. 129-171.
6. Chow, T.-W. and Ishikawa, T., Chapter 7 in Textile Structural Composites, Composite Materials Series, Vol. 3, Tsu-Wei Chou and Frank K. Ko (Eds.), Elsevier, 1989, pp. 209-264.
7. Vandeurzen, P., Ivens, J., and Verpoest, I., Chapter 3 in 3-D Textile Reinforcements in Composite Materials, A. Miravete (Ed.), Woodhead, 1999, pp. 67-99.
8. Miravete, A., Clemente, R., and Castejon, L., Chapter 4 in 3-D Textile Reinforcements in Composite Materials, A. Miravete (Ed.), Woodhead, 1999, pp. 100-150.
9. Byun, J.-H. and Chou, T.-W., Chapter 1.23 in Comprehensive Composite Materials, Vol. 1: Polymer Matrix Composites, Elsevier, 2000, pp. 719-761.
10. Design and Manufacture of Textile Composites, Long, A.C. (Ed.), Woodhead Publishing in Textiles, CRC, 2006.
11. Whyte, D., On the Structure and Properties of 3-D Braided Composites, Ph.D. Thesis, Drexel University, Philadelphia, PA, June 1986.
12. Pastore, C.M., A Processing Science Model of Three Dimensional Braiding, Ph.D. Thesis, Drexel University, Philadelphia, PA, 1988.
13. Gowayed, Y.A., An Integrated Approach to the Mechanical and Geometrical Modeling of Textile Structural Composites, Ph.D. Thesis, North Carolina State University, Raleigh, NC, May 1992.
14. Weissenbach, G., Issues in the Analysis and Testing of Textile Composites with Large Representative Volume Elements, Dissertation.com, Boca Raton, Florida, USA, 2004.
15. Masters, J.E., Foye, R.L., Pastore, C.M., and Gowayed, Y.A., NASA Contractor Report 189572, January 1992, NASA Langley Research Center, Hampton, VA.
16. Cox, B., NASA Contractor Report 4686, August 1995, NASA Langley Research Center, Hampton, VA, 1995.
17. Dow, M.B. and Dexter, H.B., NASA/TR-97-206234, NASA Langley Research Center, Hampton, VA, November 1997.
18. Gowayed, Y.A. and Pastore, C.M., NASA Conf. Publ. 3128, J.D. Buckley (Ed.), 1991, pp. 145-166.
19. Bogdanovich, A.E., NASA Conf. Publ. 3211, 1993, 271-304.
20. Also in Composites Manufacturing, Vol. 4, No. 4, 1993, pp. 173-186.
21. Naik, R.A., NASA Conf. Publ. 3294, Vol. I, Pt. 2, NASA Langley, Hampton, VA, May 1995, pp. 571-613.
22. Glaessgen, E.H., and Griffin, O.H., Jr., NASA Conf. Publ. 3311, Pt. 2, C.C. Poe, Jr. and C.E. Harris (Eds.), NASA Langley, Hampton, VA, October 1995, pp. 555-586.
23. Hartranft, D., Pravizi-Majidi, A., and Chou, T.-W., NASA Conf. Publ. 3311, Pt. 2, C.C. Poe, Jr. and C.E. Harris (Eds.), NASA Langley, Hampton, VA, October 1995, pp. 251-313.
24. Sankar, B.V. and Marrey, R.V., NASA Conf. Publ. 3311, Pt. 2, C.C. Poe, Jr. and C.E. Harris (Eds.), NASA Langley, Hampton, VA, October 1995, pp. 625-663.
25. Whitcomb, J. and Srirengan, K., NASA Conf. Publ. 3311, Pt. 2, C.C. Poe, Jr. and C.E. Harris (Eds.), NASA Langley, Hampton, VA, October 1995, pp. 665-681.
26. Byun, J.-H. and Chou, T.-W., J. of Strain Analysis, Vol. 24, No. 4, 1989, pp. 65-74.
27. Dickinson, L.C., Farley, G.L., and Hinders, M.K., J. of Composites Technology & Research, Vol. 21, No. 1, 1999, pp. 3-15.
28. Bogdanovich, A.E. and Pastore, C.M., Composites Science and Technology, Vol. 56, 1996, pp. 291-309.
29. Bogdanovich, A.E., J. of Materials Science, Vol. 41, No. 20, 2006, pp. 6547-6590.
30. Lomov, S.V., Ivanov, D.S., Verpoest, I., Zako, M., Kurashiki, T., Nakai, H., and Hirosawa, S., Composites Science and Technology, Vol. 67, 2007, pp. 1870-1891.
31. Byun, J.-H. and Chou, T.-W., J. of Textile Institute, Vol. 81, No. 4, pp. 538-548.
32. Byun, J.-H., Whitney, T.J., Du, G.-W., and Chou, T.-W., J. of Composite Materials, Vol. 25, December 1991, pp. 1599-1618.
33. Du, G.W., Chou, T.-W., J. of Materials Science, Vol. 26, 1991, pp. 3438-3448.
34. Morales, A. and Pastore, C., NASA Conf. Publ. 3128, 1991, pp. 85-96.
35. Armstrong-Carroll, E., Pastore, C., and Ko, F., NASA Conf. Publ. 3176, 1992, pp. 153-156.
36. Du, G.-W., and Ko, F., J. of Reinforced Plastics and Composites, Vol. 12, July 1993, pp. 752-768.
37. Du, G.W. and Ko, F.K., Proc. of the Ninth Int. Conf. on Composite Materials (ICCM/9), Madrid, 12-16 July, 1993, Vol. 4: Composites Design, pp. 532-539.
38. Gu, P. and Mohamed, M., Proc. of the Ninth Int. Conf. on Composite Materials (ICCM/9), Madrid, 12-16 July, 1993, Vol. 4: Composites Design, pp. 568-575.
39. Wang, Y.Q., and Wang, A.S.D., Composites Science and Technology, Vol. 54, 1995, pp. 359-370.
40. Du, G.W. and Ko, F.K., Composites Science and Technology, Vol. 56, 1996, pp. 253-260.
41. Byun, J.H. and Chou, T.W., Composites Science and Technology, Vol. 56, 1996, pp. 235-251.
42. Vandeurzen, Ph., Ivens, J., and Verpoest, I., Composites Science and Technology, Vol. 56, 1996, pp. 1303-1315.
43. Kuo, W.S., Textile Research Journal, Vol. 67, 1997, pp. 623-634.
44. Chen, L., Tao, X.M., and Choy, C.L., Proc. of the Int. Conf. on Composite Materials (ICCM-11), Gold Cost, Australia, 14-18 July, 1997, Vol. 5: Textile Composites and Characterization, pp. 317-327.
45. Kostar, T.D., Analysis, Design, Fabrication and Performance of Advanced Multi-step Threedimensional Braided Preforms, Ph.D. Dissertation, University of Delaware, Department of Mechanical Engineering, 1998.
46. Kamiya, R., Cheeseman, B.A., Popper, P., and Chou, T.-W., Composites Science and Technology, Vol. 60, 2000, pp. 33-47.
47. Loos, A.C., MacRae, J.D., Hammond, V.H., Kranbuehl, D.E., Hart, S.M., Hasko, G.H., and Markus, A.M., NASA Conf. Publ. 3178, Part 1, 1992.
48. Ko, F.K., and Du, G.-W., Chapter 5 in Advanced Composites Manufacturing, T.G. Gutowski (Ed.), John Wiley & Sons, 1997, pp. 157-205.
49. Pastore, C.M., Composites Manufacturing, Vol. 4, No. 4, 1993, pp. 217-226.
50. Cox, B.N. and Dadkhah, M.S., J. of Composite Materials, Vol. 29, No. 6, 1995, pp. 785-819.
51. Brandt, J, Drechler, K., and Arendts, F.-J., Composites Science & Technology, Vol. 56, No. 3, 1996, pp. 381-386.
52. Yushanov S.P. and Bogdanovich, A.E., Int. J. of Solids & Structures, Vol. 35, No. 22, 1998, pp. 2901-2930.
53. Yushanov, S.P. and Bogdanovich, A.E., Mechanics of Composite Materials, Vol. 36, No. 4, 2000, pp. 501-532.
54. Pastore, C., Gowayed, Y., and Cai, Y.J., Computer Aided Design in Composite Material Technology, Computational Mechanics Publications, Southampton, UK, 1990, pp. 45-53.
55. Bogdanovich, A.E., Proc. of the IUTAM Symposium "Local Mechanics Concepts for Composite Material Systems", Blacksburg, VA, 28-31 October 1991. Springer-Verlag, 1992, pp. 355-382.
56. Bogdanovich, A.E. and Pastore, C.M., Proc. ASME Summer Mechanics and Materials Conf., Tempe, AZ, 1992, Topics in Composite Materials and Structures, AD-Vol. 26, AMD-Vol. 133, 1992, 13-19.
57. Pastore, C.M, Bogdanovich, A.E., and Gowayed, Ya.A., Composites Engineering, 1993, Vol. 3, No. 2, pp. 181-194.
58. Bogdanovich, A.E., Pastore, C.M., and Birger, A.B., Proc. Ninth Int. Conf. on Composite Materials (ICCM-9), Madrid, Spain, 1993, Vol. 4, Composites Design, 1993, 495-501.
59. Bogdanovich A.E. and Pastore, C.M., Proc. the 1994 Int. Mechanical Engineering Congress & Exhibition, Chicago, IL, 1994. Reprint 94-WA/AERO-3, 1-12.
60. rd edition, 2006.
61. Agoston, M.K., Computer Graphics and Geometric Modelling: Mathematics, Springer, 2005.
62. Gallier, J., Curves in Surfaces in Geometric Modeling. Theory and Algorithms, Morgan Kaufmann Publishers, 2000.
63. Cohen, E., Riesenfeld, R.F., and Elber, G., Geometric Modeling with Splines, A.K. Peters, Ltd, 2001.
64. Bézier, P., Numerical Control: Mathematics and Applications, transl. A.R. Forrest and A.F. Pankhurst, Wiley, London, 1972.
65. Bartels, R.H., Beatty, J.C., and Barsky, B.A., An Introduction to Splines for Use in Computer Graphics & Geometric Modeling, Morgan Kaufmann Publishers, 1987.
66. Lee, Y.T. and Requicha, A.G., Communications of the ACM, Vol. 25, No. 9, 1982.
67. Mäntylä, M., An Introduction to Solid Modeling, Computer Science Press, 1988.
68. st AIAA/ASME/AHS/ASC Structures, Structural Dynamics, and Materials Conf., Atlanta, GA, 3-6 April, 2000, AIAA Paper 2000-1763.
69. Kregers, A.F. and Melbardis, Y.G., Polymer Mechanics, Vol. 14, No. 1, 1978, pp. 3-8.
70. Kregers, A.F., Mechanics of Composite Materials, Vol. 15, No. 5, pp. 1979, pp. 790-793.
71. Kregers, A.F., and Teters, G.A., Mechanics of Composite Materials, Vol. 15, No. 4, 1979, pp. 617-624.
72. Kregers, A.F. and Teters, G.A., Mechanics of Composite Materials, Vol. 17, No. 1, 1981, pp. 30-36.
73. Kregers, A.F. and Teters, G.A., Mechanics of Composite Materials, Vol. 18, No. 1, 1982, pp. 14-22.
74. Lagzdins, A., Tamuzs, V., Teters, G., and Kregers, A., Orientational Averaging in Mechanics of Solids, John Wiley & Sons, 1992.
75. th Int. SAMPE Technical Conf., Vol. 35, Dayton, OH, September 28-October 2, 2003.
76. th Int. Conf. on Composite Materials (ICCM-16), Kyoto, Japan, July 8-13, 2007.
77. Ishikawa, T. and Chou, T.-W., J. of Materials Science, Vol. 17, 1982, pp. 3211-3220.
78. Bogdanovich, A.E., Pastore, C.M., Greenhalgh, E.S., and Birger, A.B., Proc. The American Soc. for Composites, Eighth Techn. Conf., Cleveland, OH, October 1993. Technomic, 1993, pp. 851-861.
79. Bogdanovich, A.E., Computer Methods in Applied Mechanics and Engineering, Vol. 185, No. 2-4, 2000, pp. 279-304.