Three-dimensional variational theory of laminated composite plates and its implementation with Bernstein basis functions

Computer Methods in Applied Mechanics and Engineering

Volumn 185, Issue 2-4, 2000, Pages 279-304

  Bogdanovich, Alexander E ^a  

^a 3TEX Inc   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY VALUE PROBLEMS; ELASTICITY; FINITE ELEMENT METHOD; PLATES (STRUCTURAL COMPONENTS); STRESS ANALYSIS;

BERNSTEIN BASIS FUNCTION; LAMINATED COMPOSITE PLATE; THREE DIMENSIONAL VARIATIONAL THEORY;

LAMINATED COMPOSITES;

EID: 0034188361     PISSN: 00457825     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0045-7825(99)00263-7     Document Type: Article

References (46)

1. Gallagher R.H., Padlog J., Bijlaard P.P. Stress analysis of heated complex shapes. J. Aero-Space Science. 32:1962;700-707.
2. R.J. Melosh, Structural analysis of solids, J. Structural Division, Proceedings of ASCE 89, No. ST4, 1963, pp. 205-223.
3. Argyris J.H. Matrix analysis of three-dimensional elastic media - small and large displacements. AIAA J. 3:1965;45-51.
4. Argyris J.H. Three-dimensional anisotropic and inhomogeneous media - matrix analysis for small and large displacements. Ingenieur Archiv. 34:1965;33-35.
5. Argyris J.H., Fried I., Scharpf D.W. The TET 20 and TEA 8 elements for the matrix displacement method. The Aeronaut. J. Royal Aeronaut. Soc. 72(691):1968;618-623.
6. Argyris J.H. The LUMINA element for the matrix displacement method. The Aeronaut. J. Royal Aeronaut. Soc. 72(690):1968;514-517.
7. J.H. Argyris, K.E. Buck, D.W. Scharpf, H.M. Hilber, G. Mareczek, Some new elements for the matrix displacement methods, in: Proceedings of 2nd Conference on Matrix Methods in Struct. Mech., Air Force Inst. of Techn., Wright Patterson AF Base, Ohio, 1968, pp. 333-397.
8. Argyris J.H., Fried I., Scharpf D.W. The Hermes 8 element for the matrix displacement method. The Aeronaut. J. Royal Aeronaut. Soc. 72(691):1968;613-617.
9. J.G. Ergatoudis, Isoparametric finite elements in two- and three-dimensional stress analysis, Ph.D. Thesis, University of Wales, Swansea, 1968.
10. J.G. Ergatoudis, B.M. Irons, O.C. Zienkiewicz, Three-dimensional analysis of arch dams and their foundations, in: Proceedings of Symposium on Arch Dams, Institution of Civil Engineers, London, 1968, pp. 20-21.
11. O.C. Zienkiewicz, B.M. Irons, J. Ergatoudis, S. Ahmad, F.C. Scott, Iso-parametric and associated element families for two- and three-dimensional analysis, in: I. Holand, K. Bell (Eds.), Finite Element Methods in Stress Analysis, chapter 13 TAPIR, The Techn. University of Norway, Trondheim, Norway, 1969, pp. 383-432.
12. R.W. Clough, Comparison of three-dimensional finite elements, in: Proceedings of Symposium on Application of Finite Element Methods in Civil Engineering, Vanderbilt University, Nashville, Tennessee, ASCE, New York, 1969, pp. 1-26.
13. O.C. Zienkiewicz, B.M. Irons, F.C. Scott, J.S. Campbell, Three-dimensional stress analysis, in: B. Fraeijs de Veubeke (Ed.), Proceedings of Symposium on High Speed Computing of Elastic Structures, August 23-28, 1970, vol. 1, University of Liege, Belgium, 1970, pp. 413-432.
14. Rashid Y. Three-dimensional analysis of elastic solids. Int. J. Solids Structures, Pt. I. 5:1969;1311-1332.
15. Rashid Y. Three-dimensional analysis of elastic solids. Int. J. Solids Structures, Pt. II. 6:1970;195-207.
16. Rigby G.L., McNeice G.M. A strain energy basis for studies of element stiffness matrices. AIAA J. 10:1972;1490-1493.
17. O.C. Zienkiewicz, The Finite Element Method, 3rd ed., McGraw-Hill, London, 1977.
18. Gallagher R.H. Finite Element Analysis: Fundamentals. 1975;Prentice-Hall, Englewood Cliffs, NJ.
19. Yang T.Y. Finite Element Structural Analysis. 1986;Prentice-Hall, Englewood Cliffs, NJ.
20. Dawe D.J. Matrix and Finite Element Displacement Analysis. 1984;Clarendon Press, Oxford.
21. A.K. Noor, W.S. Burton, J.M. Peters, Assessment of computational models for multilayered composite cylinders, in: A.K. Noor, T. Belytschko, J. Simo (Eds.), Analytical and Computational Models of Shells, CED-vol. 3, ASME, New York, 1989, pp. 419-441.
22. Noor A.K., Burton W.S. Assessment of computational models for multilayered composite shells. Appl. Mech. Rev. 43(4):1990;67-97.
23. Noor A.K., Burton W.S. Assessment of computational models for multilayered anisotropic plates. Composite Structures. 14:1990;233-265.
24. A.E. Bogdanovich, Spline function aided analysis of inhomogeneous materials and structures, in: J.N. Reddy, K.L. Reifsnider (Eds.), Proceedings of IUTAM Symposium Local Mech. Concepts for Composite Material System, Blacksburg, Virginia, 1991, Springer, Berlin, Heidelberg, New York, 1992, pp. 355-382.
25. A.E. Bogdanovich, Three-dimensional analysis of laminated composite plates, in: T. Chandra, A.K. Dhingra (Eds.), Procceedings of International Conference on Advanced Composite Materials, University of Wollongong, Australia, 1993, TMS Minerals/Metals/Materials, Warrendale, Pennsylvania, 1993, pp. 79-91.
26. J.N. Reddy, D.H. Robbins, Theories and computational models for composite laminates, Appl. Mech. Rev. 47(6), Pt 1 (1994) 147-169.
27. F.K. Bogner, R.L. Fox, L.A. Schmit, Jr., The generation of inter-element-compatible stiffness and mass matrices by the use of interpolation formulas, in: Matrix Meth. in Struct. Mech., The Conference held at Wright Patterson AF Base, 1965, Dayton, Ohio, 1965, pp. 397-443.
28. Palazotto A.N., Witt W.P. Formulation of a non-linear compatible finite element for the analysis of laminated composites. Computers Structures. 21:1985;1213-1234.
29. Hinrichsen R.L., Palazotto A.N. The non-linear finite element analysis of thick composite plates using cubic spline functions. AIAA J. 24:1986;1836-1842.
30. Bogdanovich A.E., Pastore C.M., Deepak B.P. A comparison of various 3-D approaches for the analysis of laminated composite structures. Composites Engrg. 5:1995;1105-1126.
31. A.E. Bogdanovich, Three-dimensional analysis of anisotropic spatially reinforced structures, in: John D. Buckley (Ed.), Fiber-Tex 1992, The Sixth Conference on Adv. Engrg. Fibers and Textile Struct. for Composites, 1992, Philadelphia, Pennsylvania, NASA Conf. Publ. 3211, 1992, pp. 271-304; also published in Composites Manufacturing 4 (1993) 173-186.
32. A.E. Bogdanovich, Three-dimensional analysis of anisotropic spatially reinforced structures, in: John D. Buckley (Ed.), Fiber-Tex 1992, The Sixth Conference on Adv. Engrg. Fibers and Textile Struct. for Composites, 1992, Philadelphia, Pennsylvania, NASA Conf. Publ. 3211, 1992, pp. 271-304; also published in Composites Manufacturing 4 (1993) 173-186.
33. A.E. Bogdanovich, A.B. Birger, Application of spline functions to the analysis of local boundary effects in laminated composite plates, in: D.H. Allen, D.C. Lagoudas (Eds.), Proceedings of ASME Winter Annual Meeting, Symp. on Damage Mech. in Compos., Anaheim, California, 1992, AMD-vol. 150/AD-vol. 32, ASME, New York, 1992, pp. 275-293.
34. A.E. Bogdanovich, A.B. Birger, Stress fields and initial failure in a cantilever laminated composite plate under transverse and in-plane loads, in: L. Librescu (Ed.), Proceedings of the 1st Joint Mech. Meeting of ASME/ASCE/SES, Symposium on Non-Classical Probl. of the Theory and Behav. of Struct. Exposed to Complex Environ. Cond., Charlottesville, Virginia, 1993, AMD-vol. 164, ASME, New York, 1993, pp. 155-167.
35. Bogdanovich A.E., Birger A.B. Three-dimensional stress field analysis in uniformly loaded, simply supported composite plates. Computers Structures. 52:1994;237-257.
36. V.V. Novozhilov, Theory of Elasticity, Sudpromgiz, Leningrad, 1958, in Russian; English translation by J.K. Lusher, Pergamon Press, New York, 1961.
37. Bogdanovich A.E., Pastore C.M. Mechanics of Textile and Laminated Composites. 1996;Chapman & Hall, London.
38. Pagano N.J. Exact solutions for rectangular bidirectional composites and sandwich plates. J. Compos. Mater. 4:1970;20-34.
39. Faux I.D., Pratt M.J. Computational Geometry for Design and Manufacture. 1981;Ellis Harwood, England.
40. Bu-Qing S., Ding-Yuan L. Computational Geometry Curve and Surface Modeling. 1989;Academic Press, San Diego, NY.
41. Farin G. Curves and Surfaces for Computer Aided Geometric Design. 1988;Academic Press, New York.
42. W. Feller, An Introduction to Probability Theory and Its Applications, 2nd ed., vol. II, Wiley, New York, 1974.
43. Davis P.J. Interpolation and Approximation. 1975;Dover Publications, New York.
44. A.E. Bogdanovich, 3-D strength prediction of composite materials, Interim Techn. Rep. WLTR-98, Materials Directorate, Wright Patterson Air Force Base, Ohio, 1997, Part B, pp. 38-89.
45. A.E. Bogdanovich, S.P. Yushanov, 3-D progressive failure analysis of bonded composite joints, in: A Coll. of Techn. Pap. of the 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dyn., and Mater. Conf. and Exhibit, Long Beach, California, 1998, Pt. 3, AIAA, Reston, Virginia, 1998, pp. 1984-1993.
46. A.E. Bogdanovich, S.P. Yushanov, Progressive failure analysis of adhesive bonded joints with laminated composite adherends, in: Proceedings of the American Society for Composites, 13th Annual Techn. Conf., Baltimore, MD, September 21-23, 1998, Technomic Publishing Co. pp. 452-464.