An in vitro and in vivo evaluation of bioactive titanium implants following sodium removal treatment

Dental Materials

Volumn 25, Issue 1, 2009, Pages 48-57

  Fawzy, Amr S ^a   Amer, Mohammed A ^b  

^a Ain Shams University   (Egypt)

^b National Institute of Standards   (Egypt)

Author keywords

AFM; Bioactivity; Functional parameters; Surface topography; Surface treatment; Titanium implants

Indexed keywords

ATOMIC FORCE MICROSCOPY; BIOCERAMICS; BONE; CALCIUM; ENGINEERING GEOLOGY; PHOSPHORUS; SODIUM; SODIUM DEPOSITS; SURFACE ROUGHNESS; SURFACE TOPOGRAPHY; TITANIUM;

AFM; BEFORE AND AFTER; BIOACTIVE TITANIUM IMPLANTS; CP TITANIUMS; FLUID RETENTIONS; FUNCTIONAL PARAMETERS; IMPLANT INTERFACES; IMPLANTATION PERIODS; IN VITRO; IN VITRO BIOACTIVITIES; IN VIVO EVALUATIONS; IN-VIVO; INTERFACE RESISTANCES; INTERFACE SHEARS; INTERFACIAL SHEARS; SHEAR FORCES; SIMULATED BODY FLUIDS; SODIUM REMOVALS; SURFACE AREAS; SURFACE DEPOSITS; TITANIUM IMPLANTS; TOPOGRAPHICAL CHANGES;

SURFACE TREATMENT;

ALUMINUM OXIDE; BIOMATERIAL; BIOMEDICAL AND DENTAL MATERIALS; CALCIUM; HYDROCHLORIC ACID; PHOSPHORUS; SODIUM HYDROXIDE; TITANIUM;

ANIMAL; ARTICLE; ATOMIC FORCE MICROSCOPY; BODY FLUID; BONE REGENERATION; CHEMISTRY; DENTAL ETCHING; ELECTRON PROBE MICROANALYSIS; HEAT; IMMERSION; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; PHYSIOLOGY; PRECIPITATION; RABBIT; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TEMPERATURE; TIME; TOOTH IMPLANTATION;

ALUMINUM OXIDE; ANIMALS; BIOCOMPATIBLE MATERIALS; BODY FLUIDS; CALCIUM; DENTAL ETCHING; DENTAL IMPLANTATION, ENDOSSEOUS; DENTAL IMPLANTS; DENTAL MATERIALS; ELECTRON PROBE MICROANALYSIS; HOT TEMPERATURE; HYDROCHLORIC ACID; IMMERSION; MATERIALS TESTING; MICROSCOPY, ATOMIC FORCE; MICROSCOPY, ELECTRON, SCANNING; OSSEOINTEGRATION; PHOSPHORUS; PRECIPITATION; RABBITS; SODIUM HYDROXIDE; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS; TITANIUM;

EID: 57449101709     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2008.05.007     Document Type: Article

References (38)

1. Ogawa T., Ozawa S., Shih J.H., Ryu K.H., Sukotjo C., Yang J.M., and Nishimura I. Biomechanical evaluation of osseous implants having different surface topographies in rates. J Dent Res 79 (2000) 1857-1863
2. Buser D., Nydegger T., Oxiand T., Cochran D.L., Schenk R.K., Hirt H.P., Snetivy D., and Nolte L.P. Interface shear strength of titanium implants with a sandblasted and acid-etched surface: a biomechanical study in the maxilla of miniature pigs. J Biomed Mater Res 45 (1999) 75-83
3. Wennerberg A., Albrektsson T., Johansson C., and Andresson B. Experimental study of turned and grit-blasted screw-shaped implants with special emphasis on effects of blasting material and surface topography. Biomaterials 17 (1996) 15-22
4. Anselme K., and Bigerelle M. Topography effects of pure titanium substrates on human osteoblast long-term adhesion. Acta Biomater 1 (2005) 211-222
5. Bruni S., Martinesi M., Stio M., Treves C., Bacci T., and Borgioli F. Effects of surface treatment of Ti-6Al-4V titanium alloy on biocompatibility in cultured human umbilical vein endothelial cells. Acta Biomater 1 (2005) 223-234
6. 3. J Biomed Mater Res 30 (1996) 251-260
7. Pypen C.M.J.M., Plenk H., Ebel M.E., Svagera R., and Wemisch J. Characterization of micro-blasted and reactive ion etched surfaces on the commercially pure metals niobium, tantalum and titanium. J Mater Sci: Mater Med 8 (1997) 781-784
8. Hacking S.A., Bobyn J.D., Tanzer M., and Krygier J.J. The osseous response to corundum blasted implant surfaces in a canine hip model. Clin Orthop 364 (1999) 240-253
9. Sittig C., Textor M., Spencer N.D., Wieland M., and Vallotton P.H. Surface characterization of implant materials c.p. Ti, Ti-6AL-7Nb and Ti-6AL-4V with different pretreatments. J Mater Sci: Mater Med 10 (1999) 35-46
10. Larsson C., Thomsen P., Lausmaa J., Rodahl M., Kasemo B., and Ericson L.E. Bone response to surface modified titanium implants: studies on electropolished implants with different oxide thicknesses and morphology. Biomaterials 15 (1994) 1062-1074
11. Lchikawa T., Hanawa T., and Ukai H. Murakami K: three-dimensional bone response to commercially pure titanium, hydroxyapatite, and calcium-ion-mixing titanium in rabbits. Int J Oral Maxillofac Implants 15 (2000) 231-238
12. Kim H.M., Miyaji F., Kokubo T., and Nakamura T. Preparation of bioactive Ti and its alloys via simple chemical surface treatment. J Biomed Mater Res 32 (1996) 409-417
13. Vanzillotta P., Sader M., Bastos I., and Soares G. Improvement of in vitro titanium bioactivity by three different surface treatments. Dent Mater 22 (2006) 275-282
14. Hench L.L. Bioactive ceramics: theory and clinical applications. In: Andersson O.H., and Yli-Urpo A. (Eds). Bioceramics 7 (1994), Butterworth-Heinemann, Ltd., Oxford, England 3-14
15. Cooper L.F. A role for surface topography in creating and maintaining bone at titanium endosseous implants. J Prosth Dent 84 (2000) 522-534
16. Sennerby L., Thomsen P., and Ericson L.E. Ultrastructure of the bone-titanium interface in rabbits. J Mater Sci: Mater Med 3 (1992) 262-271
17. Steflif D.E., Sisk A.L., Parr G.R., Gardner L.K., Hanes P.J., Lake F.T., Berkery D.J., and Brewer P. Osteogenesis at the dental implant interface: high-voltage electron microscopic and conventional transmission electron microscopic observation. J Biomed Mater Res 27 (1993) 791-800
18. Klein C.P.A.T., Wolke J.G.C., and deGroot K. Stability of calcium phosphate ceramics and plasma sprayed coating. In: Hench L.L., and Wilson J. (Eds). An Introduction to Bioceramics (1993), World science, Singapore 199-222
19. Zhao X., Liu X., Ding C., and Chu P.K. In vitro bioactivity of plasma-sprayed TiO2 coating after sodium hydroxide treatment. Surf Coat Technol 200 (2006) 5487-5492
20. Kim H.M., Miyaji F., Kokubo T., and Nakamura T. Effect of heat treatment on apatite-forming ability of Ti metal induced by alkali treatment. J Mater Sci: Mater Med 8 (1997) 341-347
21. Nishiguchi S., Kato H., Fujita H., Kim H.M., Miyaji F., Kokubo T., and Nakamura T. Enhancement of bone-bonding strengths of titanium alloy implants by alkali and heat treatments. J Biomed Mater Res 48 (1999) 689-696
22. Uchida M., Kim H.M., Kokubo T., Fujibayashi S., and Nakamura T. Effect of water treatment on the apatite-forming ability of NaOH-treated titanium metal. J Biomed Mater Res 63 (2002) 522-530
23. Fujibayashi S., Nakamura T., Nishiguchi S., Tamura J., Uchida M., Kim H.M., et al. Bioactive titanium: effect of sodium removal on the bone-bonding ability of bioactive titanium prepared by alkali and heat treatment. J Biomed Mater Res 56 (2001) 562-570
24. Takemoto M., Fujibayashi S., Neo M., Suzuki J., Matsushita T., Kokubo T., and Nakamura T. Osteoinductive porous titanium implants: effect of sodium removal by dilute HCl treatment. Biomaterials 27 (2006) 2682-2691
25. Stout KJ, Sullivan PJ, Dong WP, Mainsah E, Luo N, Mathia T, Zahouani H. The development of methods for the characterization of roughness on three dimensions. Publication No. EUR 15178 EN of the Commission of the European Communities, Luxembourg, 1994.
26. Wennerberg A., Albrektsson T., and Andresson B. Bone tissue response to commercially pure titanium implants blasted with fine and coarse particles of aluminum oxide. Int J Oral Maxillofac Implants 11 (1996) 38-45
27. Wennerberg A., and Albrektsson T. Suggested guidelines for topographic evaluation of implant surfaces. Int J Oral Maxillofac Implants 15 (2000) 331-344
28. Wieland M., Textor M., Spencer N.D., and Brunette D.M. Wavelength-dependent roughness: a quantitative approach to characterizing the topography of rough titanium surfaces. Int J Oral Maxillofac Implants 16 (2001) 163-181
29. Wieland M., Hanggi P., Hotz W., Textor M., Keller B.A., and Spencer N.D. Wavelength-dependent measurement and evaluation of surface topographies: application of a new concept of window roughness and surface transfer function. Wear 237 (2000) 231-252
30. Chehroudi B., Me Donnel D., and Brunette D.M. The effects of micromachined surfaces on formation of bone like tissue on subcutaneous implants as assessed by radiography and computer image processing. J Biomed Mater Res 34 (1997) 279-290
31. Wilkinson C.D.W., Curtis A.S.G., and Crossan J. Nanofabrication in cellular engineering. J Vac Sci Technol B16 (1998) 3132-3136
32. Arvidsson A., Sater B.A., and Wennerberg A. The role of functional parameters for topographical characterization of bone-anchored implants. Clin Implant Dent Relat Res 8 2 (2006) 70-76
33. Kasemo B., and Lausmaa J. Biomaterial and implant surfaces: the role of cleanliness, contamination and preparation procedures. J Biomed Mater Res 22 (1988) 145-153
34. Placko H.E., Mishra S., Weimer J.J., and Lucas L.C. Surface characterization of titanium based implant materials. Int J Oral Maxillofac Implants 15 (2000) 355-363
35. Kilpadi D.V., Lemons J.E., Liu J., Raikar G.N., Weimer J.J., and Vohra Y. Cleaning and heat treatment effects on unalloyed titanium implant surfaces. Int J Oral Maxillofac Implants 15 (2000) 219-230
36. 2 glasses. Biomaterials 24 (2003) 1349-1356
37. Nishiguchi S., Kato H., Neo M., Oka M., Kim H.M., Kokube T., and Nakamura T. Alkali- and heat-treated porous titanium for orthopedic implants. J Biomed Mater Res 54 (2001) 198-208
38. Yan W.Q., Nakamura T., Kobayashi M., Kim H.M., and Kokubo T. Bonding of chemically treated titanium implants to bone. J Biomed Mater Res 37 (1997) 267-275