A scroll compressor with a high-performance sensorless induction motor drive for the air management of a PEMFC system for automotive applications

IEEE Transactions on Vehicular Technology

Volumn 57, Issue 6, 2008, Pages 3413-3427

  Blunier, Benjamin ^a   Pucci, Marcello ^b   Cirrincione, Maurizio ^a   Cirrincione, Giansalvo ^c   Miraoui, Abdellatif ^a  

^a UNIVERSITÉ DE TECHNOLOGIE DE BELFORT MONTBÉLIARD   (France)

^b INSTITUTE OF INTELLIGENT SYSTEMS FOR AUTOMATION   (Italy)

^c UNIVERSITÉ DE PICARDIE JULES VERNE   (France)

Author keywords

Automotive applications; Compressors for fuel cells; Fuel cell air management; High performance motor drives; Neural networks

Indexed keywords

AC MOTORS; AUTOMOBILES; CELL MEMBRANES; COMPRESSORS; DRIVES; ELECTRIC BATTERIES; ELECTRIC DRIVES; ELECTRIC MACHINERY; ELECTROCHEMISTRY; EXPERIMENTAL REACTORS; EXPERIMENTS; FUEL CELLS; MOTORS; NEURAL NETWORKS; NUCLEAR FUEL REPROCESSING; PERMANENT MAGNETS; POWER CONVERTERS; PROTON EXCHANGE MEMBRANE FUEL CELLS (PEMFC); SOLID OXIDE FUEL CELLS (SOFC); SPEED;

A STABLES; AIR MANAGEMENTS; AUTOMOTIVE APPLICATIONS; ELECTRICAL VEHICLES; EUROPEAN DRIVING CYCLES; GLOBAL EFFICIENCIES; HIGH SPEEDS; HIGH-PERFORMANCE MOTOR DRIVES; INDUCTION-MOTOR DRIVES; MANAGEMENT SYSTEMS; MODEL-BASED; NEURAL-NETWORK; NO LOADS; PEMFC SYSTEMS; SCROLL COMPRESSORS; SENSOR LESS; SENSORLESS INDUCTION MOTOR DRIVES; SENSORLESS TECHNIQUES; SPEED CHARACTERISTICS; SPEED ESTIMATIONS; SPEED OBSERVERS; WHOLE SYSTEMS; ZERO SPEEDS;

INDUCTION MOTORS;

EID: 57049099121     PISSN: 00189545     EISSN: None     Source Type: Journal    
DOI: 10.1109/TVT.2008.919618     Document Type: Article

References (45)

1. M. Farooque and H. C. Maru, "Fuel cells - The clean and efficient power generators," Proc. IEEE, vol. 89, no. 12, pp. 1819-1829, Dec. 2001.
2. M. Parten and T. Maxwell, "Development of a PEM fuel cell vehicle," in Proc. IEEE 54th VTC, 2001, pp. 2225-2228.
3. A. Emadi, S. S. Williamson, and A. Khaligh, "Power electronics intensive solutions for advanced electric, hybrid electric, and fuel cell vehicular power systems," IEEE Trans. Power Electron., vol. 21, no. 3, pp. 567-577, May 2006.
4. J. F. McElroy, "Fuel cell power plants for automotive applications," IEEE Trans. Veh. Technol., vol. VT-32, no. 1, pp. 33-41, Feb. 1983.
5. M. Amrhein and P. T. Krein, "Dynamic simulation for analysis of hybrid electric vehicle system and subsystem interactions, including power electronics," IEEE Trans. Veh. Technol., vol. 54, no. 3, pp. 825-836, May 2005.
6. A. Giustiniani, G. Petrone, C. Pianese, M. Sorrentino, G. Spagnuolo, and M. Vitelli, "PEM fuel cells control by means of the perturb and observe technique," in Proc. 32nd IEEE Annu. Conf. IECON, Nov. 2006, pp. 4349-4354.
7. K. Rajashekara, "Power conversion and control strategies for fuel cell vehicles," in Proc. 29th IEEE Annu. Conf. IECON, Nov. 2-6, 2003, vol. 3, pp. 2865-2870.
8. B. Fahimi, Y. Gao, and M. Ehsani, "On the suitability of switched reluctance motor drives for 42 volts super high speed operation: Application to automotive fuel cells," in Proc. 27th IEEE Annu. Conf. IECON, Nov. 29-Dec. 2, 2001, vol. 3, pp. 1947-1952.
9. P. Thounthong, S. Rael, and B. Davat, "Control of fuel cell/ supercapacitors hybrid power sources," in Proc. 32nd IEEE Annu. Conf. IECON, Nov. 6-10, 2005.
10. J. T. Pukrushpan, A. G. Stefanopoulou, and H. Peng, "Control of fuel cell power systems: Principle, modeling analysis and feedback design," in Advances in Industrial Control. Berlin, Germany: Springer-Verlag, 2004.
11. J. M. Cunningham, M. A. Hoffman, and D. J. Friedman, "A comparison of high-pressure and low-pressure operation of PEM fuel cell systems," presented at the SAE 2001 World Congr., pp. 61-67, Detroit, MI, 2001, SAE no. 2001-01-0538.
12. B. Blunier and A. Miraoui, "Piles combustible, Principe, modélisation et applications avec exercices et problèmes corrigés," Technosup, 2007, Ellipses. (in French).
13. B. Blunier and A. Miraoui, "Optimization and air supply management of a polymer electrolyte fuel cell," in Proc. IEEE Conf. VPP, Sep. 7-9, 2005.
14. S. Pischinger, C. Schönfelder, O. Lang, and H. Kindl, "Development of fuel cell system air management utilizing Hil tools," presented at the SAE 2002 World Congr. Exh., pp. 109-117, Detroit, MI 2002, SAE no. 2002-01-0409.
15. M. Cirrincione, M. Pucci, G. Cirrincione, and G.-A. Capolino, "A new TLS-based MRAS speed estimation with adaptive integration for high-performance induction machine drives," IEEE Trans. Ind. Appl. vol. 40, no. 4, pp. 1116-1137, Jul./Aug. 2004.
16. M. Cirrincione and M. Pucci, "An MRAS-based sensorless high-performance induction motor drive with a predictive adaptive model," IEEE Trans. Ind. Electron., vol. 52, no. 2, pp. 532-551, Apr. 2005.
17. L. Ben-Brahim and R. Kurosawa, "Identification of induction motor speed using neural networks," in Proc. IEEE PCC, 1993, pp. 689-694.
18. M. Elloumi, L. Ben-Brahim, and M. A. Al-Hamadi, "Survey of speed sensorless controls for IM drives," in Proc. 24th IEEE Annu. Conf. IECON, 1998, pp. 1018-1023.
19. L. Ben-Brahim, S. Tadakuma, and A. Akdag, "Speed control of induction motor without rotational transducers," IEEE Trans. Ind. Appl., vol. 35, no. 4, pp. 844-850, Jul./Aug. 1999.
20. M. Cirrincione, M. Pucci, G. Cirrincione, and G.-A. Capolino, "Sensorless control of induction machines by a new neural algorithm: The TLS EXIN neuron," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 127-149, Feb. 2007.
21. M. Cirrincione and M. Pucci, "Sensorless direct torque control of an induction motor by TLS-based MRAS observer with adaptive integration," Automatica, vol. 41, no. 11, pp. 1843-1854, 2005.
22. P. Vas, Sensorless Vector and Direct Torque Control. Oxford, U.K.: Oxford Science, 1998.
23. J. Holtz, "Sensorless control of induction motor drives," Proc. IEEE, vol. 90, no. 8, pp. 1359-1394, Aug. 2002.
24. M. Cirrincione, M. Pucci, G. Cirrincione, and G.-A. Capolino, "An adaptive speed observer based on a new total least-squares neuron for induction machine drives," IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 89-104, Jan./Feb. 2006.
25. A. Wiartalla, S. Pischinger, W. Bornscheuer, K. Fieweger, and J. Ogrzewalla, "Compressor expander units for fuel cell systems," presented at the SAE 2000 World Congr., pp. 149-153, Detroit, MI, 2000, SAE no. 2000-01-0380.
26. J. Larminie and A. Dicks, Fuel Cell Systems Explained, 2nd ed. Hoboken, NJ: Wiley, 2003.
27. ADEME, Web site of ADEME, (in French). [Online]. Available: http://www.ademe.fr
28. Busch, Web site of the company Busch. [Online]. Available: http:// www.busch.fr
29. J. Leclerc, "Pompes à transfert de gaz, pompes volumétriques," Techniques de l'ingenieur. Tech. Rep.
30. T. Destoop, "Compresseurs volumétriques," Techniques de l'Ingénieur, Traité Génie Mécanique, Aug. 1989.
31. K.-W. Suh and A. G. Stefanopoulou, "Performance limitations of air flow control in power-autonomous fuel cell systems," IEEE Trans. Control Syst. Technol., vol. 15, no. 3, pp. 465-473, May 2007.
32. A. Vahidi, I. Kolmanovsky, and A. Stefanopoulou, "Constraint handling in a fuel cell system: A fast reference governor approach," IEEE Trans. Control Syst. Technol., vol. 15, no. 1, pp. 86-98, Jan. 2007.
33. R. Tirnovan, S. Giurgea, A. Miraoui, and M. Cirrincione, "Surrogate modeling of compressor characteristics for fuel-cell applications," Applied Energy, vol. 85, no. 5, pp. 394-403, May 2005.
34. S. Pischinger and O. Lang, Handbook of Fuel Cells, Fundamentals, Technology and Applications, vol. 4. Hoboken, NJ: Wiley, 2003, pp. 727-741.
35. Y. Zhao, L. Li, H. Wu, and P. Shu, "Theoretical and experimental studies of water injection scroll compressor in automotive fuel cell systems," Energy Convers. Manag., vol. 46, no. 9/10, pp. 1379-1392, Jun. 2005.
36. Y. Zhao, L. Liansheng, S. Jiang, Z. Wei, and S. Pengcheng, "Research on oil-free air scroll compressor with high speed in 30 kW fuel cell," Appl. Therm. Eng., vol. 23, no. 5, pp. 593-603, Apr. 2003.
37. S. Naylor, V. Pickett, and D. Atkinson, "Optimization of compressor power supply and control systems for automotive fuel cell drive train applications," in Proc. IEEE VPPC, Sep. 6-8, 2006, pp. 1-5.
38. D. S. Kirschen, D. W. Novotny, and T. A. Lipo, "Optimal efficiency control of an induction motor drive," IEEE Trans. Energy Convers. vol. EC-2, no. 1, pp. 70-75, Mar. 1987.
39. C. Canudas de Wit and S. I. Seleme, "Robust torque control design for induction motors: The minimum energy approach," Automatica, vol. 33, no. 1, pp. 63-79, Jan. 1997.
40. P. McCleer, "Electric drives for pump, fan, and compressor loads in automotive applications," in Proc. IEEE ISIE, Jul. 1995, vol. 1, pp. 80-85.
41. H. Kubota, K. Matsuse, and T. Nakano, "DSP-based speed adaptive flux observer of induction motor," IEEE Trans. Ind. Appl., vol. 29, no. 2, pp. 344-348, Mar./Apr. 1993.
42. J. Holtz and J. Quan, "Sensorless vector control of induction motors at very low speed using a nonlinear inverter model and parameter identification," IEEE Trans. Ind. Appl., vol. 38, no. 4, pp. 1087-1095, Jul./Aug. 2002.
43. K. Rajashekara, A. Kawamura, and K. Matsuse, Sensorless Control of AC Motor Drives. Piscataway, NJ: IEEE Press, 1996.
44. G. Cirrincione, M. Cirrincione, J. Herault, and S. Van Huffel, "The MCA EXIN neuron for the minor component analysis," IEEE Trans. Neural Netw., vol. 13, no. 1, pp. 160-187, Jan. 2002.
45. G. Cirrincione and M. Cirrincione, "Linear system identification using the TLS EXIN neuron," Neurocomputing, vol. 28, no. 1, pp. 53-74, Oct. 1999.