Fiber reinforced laminates: Progressive damage modeling based on failure mechanisms

Archives of Computational Methods in Engineering

Volumn 15, Issue 2, 2008, Pages 163-184

  Schuecker, C ^a   Pettermann, H E ^a  

^a VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

Author keywords

Computational mechanics; Continuum damage; Fiber reinforced laminates; Non linear material behavior; Plasticity; Puck failure hypothesis

Indexed keywords

COMPUTATIONAL MECHANICS; CONTINUUM DAMAGE MECHANICS; CONTINUUM MECHANICS; FORECASTING; FRACTURE MECHANICS; MECHANICS; PLASTICS; WELDS;

BRITTLE DAMAGES; BRITTLE FAILURES; CONTINUOUS FIBERS; CONTINUUM DAMAGE; CONTINUUM DAMAGE MODELS; CONTINUUM DAMAGES; DAMAGE BEHAVIORS; DAMAGE MODELS; DIFFERENT DAMAGES; EXTENDED MODELS; FAILURE MECHANISMS; MODELING APPROACHES; NON-LINEAR MATERIAL BEHAVIOR; PLASTIC STRAINS; PROGRESSIVE DAMAGES; PUCK FAILURE HYPOTHESIS; REINFORCED LAMINATES;

LAMINATES;

EID: 56949088042     PISSN: 11343060     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11831-008-9016-z     Document Type: Article

References (79)

1. Allen DH (1994) Damage evolution in laminates. In: Talreja R (ed) Damage mechanics of composite materials. Composite Materials series, vol 9. Elsevier Science, Oxford, Chap. 3
2. DH Allen C Yoon 1998 Homogenization techniques for thermoviscoelastic solids containing cracks Int J Sol Struct 35 31-32 4035 4053
3. Allix O, Daudeville L, Ladevèze P (1991) Delamination and damage mechanics. In: Baptiste D (ed) Mechanics and mechanisms of damage in composites and multi-materials. Mechanical Engineering Publications, London, pp 143-158
4. O Allix P Feissel P Thévenet 2003 A delay damage mesomodel of laminates under dynamic loading: basic aspects and identification issues Compos Struct 81 1177 1191
5. Allix O, Ladevèze P (1996) Damage mechanics of interfacial media: Basic aspects, identification and application to delamination. In: Allen DH, Vajiadjis GZ (eds) Damage and interfacial debonding in composites. Studies in applied mechanics, vol 44. Elsevier Science, Oxford, pp 167-188
6. EJ Barbero P Lonetti 2002 An inelastic damage model for fiber reinforced laminates J Compos Mater 36 8 941 962
7. Bednarcyk BA (2002) A fully coupled micro/macro theory for thermo-electro-magneto-elasto-plastic composite laminates. Technical Report NASA/CR-2002-211468, NASA
8. Y Benveniste 1987 A new approach to the application of Mori-Tanaka's theory in composite materials Mech Mater 6 147 157
9. P Berbinau C Soutis P Goutas PT Curtis 1999 Effect of off-axis ply orientation on 0°-fibre microbuckling Composites A 30 1197 1207
10. Böhm HJ (ed) (2004) Mechanics of microstructured materials. CISM courses and lectures, vol. 464. Springer, New York
11. Camanho PP, Dávila CG, Maimí P, Mayugo JA (2005) A continuum damage model to predict ultimate failure of composite structures. In: Proc. of 15th international conference on composite materials (ICCM 15), Durban, South Africa, 27 June-1 July 2005, pp P-07f
12. PP Camanho CG Dávila ST Pinho L Iannucci P Robinson 2006 Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear Composites A 37 165 176
13. JF Caron A Ehrlacher 1997 Modelling the kinetics of transverse cracking in composite laminates Compos Sci Technol 57 1261 1270
14. A Cauvin RB Testa 1999 Damage mechanics: basic variables in continuum theories Int J Solids Struct 36 747 761
15. Dávila CG, Camanho PP (2003) Failure criteria for FRP laminates in plane stress. Technical Report TM-2003-212663, NASA
16. D Halm A Dragon 1998 An anisotropic model of damage and frictional sliding for brittle materials Eur J Mech A/Solids 17 3 439 460
17. Hampel S (2002) Implementierung eines Schalen-Degradationsmodells für unidirektionale Faserverbundlaminate in ein Finite Elemente Programm. Master's thesis, Institute of Lightweight Structures and Aerospace Engineering, Vienna University of Technology, Vienna, Austria
18. Z Hashin 1980 Failure criteria for unidirectional fiber composites J Appl Mech 47 329 334
19. s laminates with fiber rotation Compos Sci Technol 60 2781 2789
20. Hinton M, Kaddour AS, Soden PD (2004) Failure criteria in fibre-reinforced-polymer composites: the world-wide failure exercise. Elsevier science & technology books. Elsevier, Amsterdam
21. R Joffe A Krasnikovs J Varna 2001 COD Compos Sci Technol 61 637 656
22. R Joffe J Varna 1999 Analytical modeling of stiffness reduction in symmetric and balanced laminates due to cracks in 90° layers Compos Sci Technol 59 1641 1652
23. AF Johnson AK Pickett P Rozycki 2001 Computational methods for predicting impact damage in composite structures Compos Sci Technol 61 2183 2192
24. Jones RM (1999) Mechanics of composite materials, 2nd edn. Taylor & Francis, Philadelphia
25. J Juhasz R Rolfes K Rohwer 2001 A new strength model for application of a physically based failure criterion to orthogonal 3D fiber reinforced plastics Compos Sci Techol 61 1821 1832
26. AS Kaddour MJ Hinton PD Soden 2003 Behaviour of ±45° glass/epoxy filament wound composite tubes under quasi-static equal biaxial tension-compression loading: experimental results Composites B 34 689 704
27. M Kashtalyan C Soutis 2002 Analysis of local delaminations in composite laminates with angle-ply matrix cracks Int J Solids Struct 39 1515 1537
28. H Kilic R Haj-Ali 2003 Progressive damage and nonlinear analysis of pultruded composite structures Composites B 34 235 250
29. S Kyriakides R Arseculeratne EJ Perry KM Liechti 1995 On the compressive failure of fiber reinforced composites Int J Solids Struct 32 6/7 689 738
30. Ladevèze P (1991) On a damage mechanics approach. In: Baptiste D (ed) Mechanics and mechanisms of damage in composites and multi-materials. Mechanical Engineering Publications, London, pp 119-142
31. Ladevèze P (1994) Inelastic strains and damage. In: Talreja R (ed) Damage mechanics of composite materials. Composite materials series, vol 9. Elsevier Science, Oxford, Chap. 4
32. Ladevèze P (2001) A damage mesomodel of laminate composites. In: Lemaitre J (ed) Handbook of materials behavior models. Academic Press, London, pp 1004-1014
33. P Ladevèze G Lubineau 2001 On a damage mesomodel for laminates: micro-meso relationships, possibilities and limits Compos Sci Techol 61 2149 2158
34. MC Lafarie-Frenot C Hénaff-Gardin D Gamby 2001 Matrix cracking induced by cyclic ply stresses in composite laminates Compos Sci Techol 61 2327 2336
35. CS Lee W Hwang HC Park KS Han 1999 Failure of carbon/epoxy composite tubes under combined axial and torsional loading 2. Fracture morphology and failure mechanism Compos Sci Techol 59 1789 1804
36. Lemaitre J (1992) A course on damage mechanics. Springer, Berlin
37. M Leukart E Ramm 2003 A comparison of damage models formulated on different material scales Comput Math Sci 28 749 762
38. Lo DC, Coats TW, Harris CE, Allen DH (1996) Progressive damage analysis of laminated composite (PDALC)-a computational model implemented in the NASA COMET finite element code. Technical Report TM 4724, NASA
39. F Meraghni F Desrumaux ML Benzeggagh 2002 Implementation of a constitutive micromechanical model for damage analysis in glass mat reinforced composite structures Compos Sci Technol 62 2087 2097
40. Moncel L (1999) Etude des mécanismes d'endommagement d'un assemblage cuivre/composite carbone-carbone sous chargement thermomé canique. Ph.D. thesis, Université Bordeaux I, Ecole Doctorale des Sciences Physiques et de L'Ingenieur, Bordeaux, France
41. T Mori K Tanaka 1973 Average stress in the matrix and average elastic energy of materials with misfitting inclusions Acta Metall 21 571 574
42. Nairn JA, Hu S (1994) Matrix microcracking. In: Talreja R (ed) Damage mechanics of composite materials. Composite materials series, vol 9. Elsevier Science, Oxford, Chap. 6
43. Nettles AT, Biss EJ (1996) Low temperature mechanical testing of carbon-fiber/epoxy-resin composite materials. Technical Report TP 3663, NASA
44. T Okabe N Takeda Y Kamoshida M Shimizu WA Curtin 2001 A 3D shear-lag model considering micro-damage and statistical strength prediction of unidirectional fiber-reinforced composites Compos Sci Technol 61 1773 1787
45. GS Padhi RA Shenoi SSJ Moy GL Hawkins 1998 Progressive failure and ultimate collapse of laminated composite plates in bending Compos Struct 40 3-4 277 291
46. Pagano NJ, Schoeppner GA (2000) Delamination of polymer matrix composites: Problems and assessment. In: Comprehensive composite materials, vol 2. Elsevier Science, Oxford, pp 433-528, Chap. 2.13
47. DH Pahr FG Rammerstorfer 2004 A fast mutiscale analysing tool for the investigation of perforated laminates Compos Struct 82 2-3 227 239
48. Palanterä M (1999) Theoretical background of ESAComp analyses, version 1.5. Helsinki University of Technology, Finland
49. EA Phillips CT Herakovich LL Graham 2001 Damage development in composites with large stress gradients Compos Sci Technol 61 2169 2182
50. Pinho ST, Dávila CG, Camanho PP, Iannucci L, Robinson P (2005) Failure models and criteria for FRP under in-plane or three-dimensional stress states including shear non-linearity. Technical Report TM-2005-213530, NASA
51. Puck A (1996) Festigkeitsanalyse von Faser-Matrix-Laminaten. Carl Hanser, München
52. A Puck J Kopp M Knops 2002 Guidelines for the determination of the parameters in Puck's action plane strength criterion Compos Sci Technol 62 3 371 378
53. A Puck H Schürmann 1998 Failure analysis of FRP laminates by means of physically based phenomenological models Compos Sci Technol 58 1045 1067
54. A Puck H Schürmann 2002 Failure analysis of FRP laminates by means of physically based phenomenological models Compos Sci Technol 62 1633 1662
55. Rabotnov JN (1969) Creep problems in structural members. North-Holland series in applied mathematics and mechanics, vol 7. North-Holland, Amsterdam
56. Rammerstorfer FG, Starlinger A (1994) Engineering mechanics of fiber reinforced polymers and composite structures. In: Lamination theory and failure mechanisms in composite shells. CISM courses and lectures, vol 348. Springer, New York
57. Schuecker C (2005) Mechanism based modeling of damage and failure in fiber reinforced polymer laminates. Ph.D. thesis, Institute of Lightweight Structures and Aerospace Engineering, Vienna University of Technology, Vienna, Austria. Also published In: Fortschritt-Berichte VDI Reihe 18 Nr. 303. VDI-Verlag, Düsseldorf
58. C Schuecker DH Pahr HE Pettermann 2006 Accounting for residual stresses in FEM analyses of laminated structures using the Puck criterion for three-axial stress states Compos Sci Technol 66 13 2054 2062
59. Schuecker C, Pettermann HE (2007) Constitutive ply damage modeling, FEM implementation, and analyses of laminated structures. Comput Struct. doi: 10.1016/j.compstruc.2007.04.021
60. C Schuecker HE Pettermann 2006 A continuum damage model for fiber reinforced laminates based on ply failure mechanisms Compos Struct 76 1-2 162 173
61. CR Schultheisz AM Waas 1996 Compressive failure of composites, part I: Testing and micromechanical theories Prog Aerosp Sci 32 1 42
62. Schürmann H (2005) Konstruieren mit Faser-Kunststoff-Verbunden. Springer, Berlin
63. Smith PA (2000) Carbon fiber reinforced plastics-properties. In: Comprehensive composite materials, vol 2. Elsevier Science, Oxford, pp 107-150, Chap. 2.04
64. PD Soden MJ Hinton AS Kaddour 1998 Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates Compos Sci Technol 58 1011 1022
65. PD Soden MJ Hinton AS Kaddour 2002 Biaxial test results for strength and deformation of a range of E-glass and carbon fibre reinforced composite laminates: failure exercise benchmark data Compos Sci Technol 62 1489 1514
66. PD Soden AS Kaddour MJ Hinton 1998 Compos Sci Technol 58 7 Special issue
67. PD Soden AS Kaddour MJ Hinton 2002 Compos Sci Technol 62 12 13 Special issue
68. PD Soden AS Kaddour MJ Hinton 2004 Compos Sci Technol 64 3 4 Special issue
69. C Soutis FC Smith FL Matthews 2000 Predicting the compressive engineering performance of carbon fibre-reinforced plastics Composites A 31 531 536
70. Stiftinger MA (1996) Semi-analytical finite element formulations for layered composite shells with consideration of edge effects. Ph.D. thesis, Vienna University of Technology, Vienna, Austria. also published in: Fortschritt-Berichte VDI Reihe 18 Nr. 203. VDI-Verlag, Düsseldorf
71. Z Sun IM Daniel JJ Luo 2003 Statistical damage analysis of transverse cracking in high temperature composite laminates J Mater Sci Eng A 341 49 56
72. Talreja R (1994) Damage characterization by internal variables. In: Talreja R (ed) Damage mechanics of composite materials. Composite materials series, vol 9. Elsevier Science, Oxford, Chap. 2
73. R Talreja S Yalvac LD Yats DG Wetters 1992 Transverse cracking and stiffness reduction in cross ply laminates of different matrix toughness J Compos Mater 26 11 1644 1663
74. Tandon GP, Kim RY (2001) Damage evolution and failure modeling in unidirectional graphite/epoxy composite. In: Proc. of 2001 ASME international mechanical engineering congress and exposition, New York, USA, 11-16 November 2001
75. GP Tandon GJ Weng 1984 The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites Polym Compos 5 327 333
76. W Van Paepegem I De Baere J Degrieck 2006 Modelling the nonlinear shear stress-strain response of glass fibre-reinfroced composites. Part I: Experimental results Compos Sci Technol 66 10 1455 1464
77. J Varna R Joffe NV Akshantala R Talreja 1999 Damage in composite laminates with off-axis plies Compos Sci Technol 59 2139 2147
78. s laminates Compos Sci Technol 61 657 665
79. A Yousefpour MN Ghasemi Nejhad 2004 Design, analysis, manufacture, and test of APC-2/AS4 thermoplastic composite pressure vessels for deep water marine applications J Compos Mater 38 19 1701 1732