A continuum damage model for fiber reinforced laminates based on ply failure mechanisms

Composite Structures

Volumn 76, Issue 1-2, 2006, Pages 162-173

  Schuecker, C ^a   Pettermann, H E ^a  

^a VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

Author keywords

Composite; Computational simulation; Continuum damage model; Fiber reinforced laminates; Non linear constitutive behavior; Progressive damage; Puck failure criterion

Indexed keywords

COMPUTER SIMULATION; CONTINUUM MECHANICS; FAILURE (MECHANICAL); FIBER REINFORCED MATERIALS; STIFFNESS;

COMPUTATIONAL SIMULATION; CONTINUUM DAMAGE MODEL; FIBER REINFORCED LAMINATES; NON-LINEAR CONSTITUTIVE BEHAVIOR; PROGRESSIVE DAMAGE; PUCK FAILURE CRITERION;

LAMINATES;

DAMAGE; DEGRADATION; FAILURE ANALYSIS; FIBER REINFORCED COMPOSITE; LAMINATE; MATHEMATICAL MODEL; STIFFNESS; THEORETICAL ANALYSIS;

EID: 33747373893     PISSN: 02638223     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compstruct.2006.06.023     Document Type: Article

References (50)

1. Nairn J.A., and Hu S. Matrix microcracking. In: Talreja R. (Ed). Damage mechanics of composite materials. Composite materials series vol. 9 (1994), Elsevier Science Ltd., Oxford, UK [Chapter 6]
2. Nettles AT, Biss EJ. Low temperature mechanical testing of carbon-fiber/epoxy-resin composite materials. Tech Rep TP 3663, NASA. 1996.
3. Smith P.A. Carbon fiber reinforced plastics - properties. Comprehensive composite materials vol. 2 (2000), Elsevier Science Ltd., Oxford, UK 107-150 [Chapter 2.04]
4. Rabotnov J.N. Creep problems in structural members. North-Holland series in applied mathematics and mechanics vol. 7 (1969), North-Holland, Amsterdam, Netherlands
5. Lemaitre J. A course on damage mechanics (1992), Springer-Verlag, Berlin, Heidelberg, Germany
6. Cauvin A., and Testa R.B. Damage mechanics: basic variables in continuum theories. Int J Solids Struct 36 (1999) 747-761
7. Jones R.M. Mechanics of composite materials. 2nd ed. (1999), Taylor & Francis Inc., Philadelphia, PA, USA
8. Padhi G.S., Shenoi R.A., Moy S.S.J., and Hawkins G.L. Progressive failure and ultimate collapse of laminated composite plates in bending. Compos Struct 40 (1998) 277-291
9. Palanterä M. Theoretical background of ESAComp analyses, version 1.5 (1999), Helsinki University of Technology, Finland
10. Stiftinger MA. Semi-analytical finite element formulations for layered composite shells with consideration of edge effects. PhD thesis, Vienna University of Technology, Vienna, Austria. 1996.
11. In: Soden P.D., Kaddour A.S., and Hinton M.J. (Eds). Special issue of Compos Sci Technol 62 (2002) 12-13
12. In: Soden P.D., Kaddour A.S., and Hinton M.J. (Eds). Special issue of Composites Science and Technology 64 (2004) 3-4
13. Puck A. Festigkeitsanalyse von Faser-Matrix-Laminaten (1996), Carl Hanser Verlag, München Wien, Germany
14. Allen D.H. Damage evolution in laminates. In: Talreja R. (Ed). Damage mechanics of composite materials. Composite materials series vol. 9 (1994), Elsevier Science Ltd., Oxford, UK [Chapter 3]
15. Allix O., Daudeville L., and Ladevèze P. Delamination and damage mechanics. In: Baptiste D. (Ed). Mechanics and mechanisms of damage in composites and multi-materials (1991), Mechanical Engineering Publications Limited, London, UK 143-158
16. Barbero E.J., and Lonetti P. An inelastic damage model for fiber reinforced laminates. J Compos Mater 36 (2002) 941-962
17. Ladevèze P. On a damage mechanics approach. In: Baptiste D. (Ed). Mechanics and mechanisms of damage in composites and multi-materials (1991), Mechanical Engineering Publications Limited, London, UK 119-142
18. Leukart M., and Ramm E. A comparison of damage models formulated on different material scales. Comput Mater Sci 28 (2003) 749-762
19. Meraghni F., Desrumaux F., and Benzeggagh M.L. Implementation of a constitutive micromechanical model for damage analysis in glass mat reinforced composite structures. Compos Sci Technol 62 (2002) 2087-2097
20. Talreja R., Yalvac S., Yats L.D., and Wetters D.G. Transverse cracking and stiffness reduction in cross ply laminates of different matrix toughness. J Compos Mater 26 (1992) 1644-1663
21. Allix O., Feissel P., and Thévenet P. A delay damage mesomodel of laminates under dynamic loading: basic aspects and identification issues. Compos Struct 81 (2003) 1177-1191
22. Ladevèze P. A damage mesomodel of laminate composites. In: Lemaitre J. (Ed). Handbook of materials behavior models (2001), Academic Press, London, UK 1004-1014
23. Johnson A.F., Pickett A.K., and Rozycki P. Computational methods for predicting impact damage in composite structures. Compos Sci Technol 61 (2001) 2183-2192
24. Kilic H., and Haj-Ali R. Progressive damage and nonlinear analysis of pultruded composite structures. Composites Part B 34 (2003) 235-250
25. Moncel L. Etude des mécanismes d'endommagement d'un assemblage cuivre/composite carbone-carbone sous chargement thermomécanique. PhD thesis, Université Bordeaux I, Ecole Doctorale des Sciences Physiques et de L'Ingenieur, Bordeaux, France. 1999.
26. Phillips E.A., Herakovich C.T., and Graham L.L. Damage development in composites with large stress gradients. Compos Sci Technol 61 (2001) 2169-2182
27. s laminates. Compos Sci Technol 61 (2001) 637-656
28. Talreja R. Damage characterization by internal variables. In: Talreja R. (Ed). Damage mechanics of composite materials. Composite materials series vol. 9 (1994), Elsevier Science Ltd., Oxford, UK [Chapter 2]
29. s laminates. Compos Sci Technol 61 (2001) 657-665
30. Soden P.D., Hinton M.J., and Kaddour A.S. Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates. Compos Sci Technol 58 (1998) 1011-1022
31. Puck A., and Schürmann H. Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol 58 (1998) 1045-1067
32. Schuecker C, Pahr D, Pettermann H. Accounting for residual stresses in FEM analyses of laminated structures using the Puck criterion for three-axial stress states. Compos Sci Technol 2006, in press.
33. Rebière J.L., Maâtallah M.N., and Gamby D. Analysis of damage mode transition in a cross-ply laminate under uniaxial loading. Compos Struct 55 (2002) 115-126
34. Lee C.S., Hwang W., Park H.C., and Han K.S. Failure of carbon/epoxy composite tubes under combined axial and torsional loading 2. Fracture morphology and failure mechanism. Compos Sci Technol 59 (1999) 1789-1804
35. Benzarti K., Cangemi L., and DalMaso F. Transverse properties of unidirectional glass/epoxy composites: influence of fibre surface treatments. Composites Part A 32 (2001) 197-206
36. Puck A., and Schürmann H. Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol 62 (2002) 1633-1662
37. Pagano N.J., and Schoeppner G.A. Delamination of polymer matrix composites: problems and assessment. Comprehensive composite materials vol. 2 (2000), Elsevier Science Ltd., Oxford, UK 433-528 [Chapter 2.13]
38. Benveniste Y. A new approach to the application of Mori-Tanaka's theory in composite materials. Mech Mater 6 (1987) 147-157
39. Mori T., and Tanaka K. Average stress in the matrix and average elastic energy of materials with misfitting inclusions. Acta Metall 21 (1973) 571-574
40. Tandon G.P., and Weng G.J. The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites. Polym Compos 5 (1984) 327-333
41. Gavazzi A.C., and Lagoudas D.C. On the numerical evaluation of Eshelby's tensor and its application to elastoplastic fibrous composites. Comput Mech 7 (1990) 13-19
42. Schuecker C. Mechanism based modeling of damage and failure in fiber reinforced polymer laminates. PhD thesis, Vienna University of Technology, Vienna, Austria, 2005.
43. Soden P.D., Hinton M.J., and Kaddour A.S. Biaxial test results for strength and deformation of a range of E-glass and carbon fibre reinforced composite laminates: failure exercise benchmark data. Compos Sci Technol 62 (2002) 1489-1514
44. Winn V.M., and Sridharan S. An investigation into the accuracy of a one-parameter nonlinear model for unidirectional composites. J Compos Mater 35 (2001) 1491-1507
45. In: Soden P.D., Kaddour A.S., and Hinton M.J. (Eds). Special issue of Compos Sci Technol 58 (1998) 7
46. Kaddour A.S., Hinton M.J., and Soden P.D. Behaviour of ±45° glass/epoxy filament wood composite tubes under quasi-static equal biaxial tension-compression loading: experimental results. Composites Part B 34 (2003) 689-704
47. Lee C.S., Hwang W., Park H.C., and Han K.S. Failure of carbon/epoxy composite tubes under combined axial and torsional loading 1. Experimental results and prediction of biaxial strength by the use of neural networks. Compos Sci Technol 59 (1999) 1779-1788
48. Chiu W.K., Galea S., and Jones R. The role of material nonlinearities in composite structures. Compos Struct 38 (1997) 71-81
49. Puck A., Kopp J., and Knops M. Guidelines for the determination of the parameters in Puck's action plane strength criterion. Compos Sci Technol 62 (2002) 371-378
50. Schuecker C, Pettermann HE. Constitutive ply damage modeling, FEM implementation, and analyses of laminated structures. In: Proc. of the III European Conference on Computational Mechanics (ECCM 2006), Lisbon, Portugal, 2006, paper 1759.