Behaviour of ±45° glass/epoxy filament wound composite tubes under quasi-static equal biaxial tension-compression loading: Experimental results

Composites Part B: Engineering

Volumn 34, Issue 8, 2003, Pages 689-704

  Kaddour, A S ^a   Hinton, M J ^b   Soden, P D ^c  

^a Future Systems Technology   (United Kingdom)

^b Future Systems Technology Division   (United Kingdom)

^c UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

A. Glass fibres; B. Strength; Biaxial; C. Analytical shear modelling; D. Mechanical testing

Indexed keywords

COMPACTION; GLASS FIBERS; MECHANICAL TESTING; SHEAR STRESS;

AXIAL COMPRESSION;

COMPOSITE MATERIALS;

EID: 0141753994     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-8368(03)00077-5     Document Type: Article

References (37)

1. Petit P.H. A simplified method of determining the in-plane shear stress/strain response of unidirectional composites. ASTM STP 460. 1969.
2. Schurmann H. How to increase the load bearing capacity of fibre plastic composite components by the introduction of internal stresses, Fortschritt-Berichte VDI, Reihe 1, Nr.170. 1989;VDI, Dusseldorf, Germany.
3. Swanson S.R., Toombes G.R. Characterisation of prepreg tow carbon/epoxy laminates. Trans ASME, J Engng Mater Technol. 111:1989;150-153.
4. Swanson S.R., Messick M.J., Tian Z. Failure of carbon/epoxy lamina under combined stress. J Comp Mater. 21:1987;619-630.
5. Swanson S.R., Messick M.J., Toombes G.R. Comparison of torsion tube and Iosipescu in-plane shear test results for a carbon fibre reinforced epoxy composite. Composites. 16:1985;220-224.
6. Chiu W.K., Galea S., Jones R. The role of material nonlinearities in composite structures. Compos Struct. 38:1997;71-81.
7. Rotem R., Hashin Z. Failure modes of angle ply laminates. J Compos Mater. 9:1974;191-206.
8. Bailey J.E., Curtis P.T., Parvisi A. On transverse cracking and longitudinal splitting behaviour of glass and carbon fibre reinforced epoxy cross ply laminates and the effect of Poisson's ratio and thermally generated strain. Proc R Soc Lond A. 366:1980;599-623.
9. Li S., Reid S.R., Soden P.D. A continuum damage model for transverse matrix cracking in laminated fibre reinforced composites. Phil Trans R Soc Lond. 356:1998;2379-2412.
10. Li S, Reid SR, Soden PD, Hinton MJ. Experimental and theoretical investigation of transverse cracking damage in ±45° laminates subjected to equal biaxial tension. In: ICCM-13, ID-1447, China; June 2001.
11. Li S, Reid SR, Soden PD, Hinton MJ. The nonlinear structural response of laminated composites. In: Sixth International Conference on Deformation and fracture of Composites, UMIST, Manchester, UK; April 2001.
12. Sun C.T., Zhu C. The effect of deformation-induced change of fibre orientation on the nonlinear behaviour of polymeric composite laminates. Compos Sci Technol. 60:2000;2336-2345.
13. Hinton M.J., Kaddour A.S., Soden P.D. Composites Science and Technology. vol. 59, no. 7:1998;. [Special issue].
14. Hinton MJ, Connor PJ, Ferguson RF, Hayman CJ. In: Proceedings of the Fifth International Conference on Deformation and Fracture of Composites; 18-19 March 1999, London, UK.
15. Soden P.D., Kitching R., Tse P.C., Tsavalas Y., Hinton M.J. Influence of winding angle on the strength and deformation of filament wound composite tubes subjected to uniaxial and biaxial loads. Compos Sci Technol. 46:1993;363-378.
16. AlSalehi F.A.R., AlHassani S.T.S., Hinton M.J. An experimental investigation into the strength of angle GRP tubes under high rate of loading. J Compos Mater. 23:1989;288-305.
17. Soden P.D., Hinton M.J., Kaddour A.S. Experimental failure stresses and deformations for a range of composite laminates subjected to uniaxial and biaxial loads. Compos Sci Technol. 62:2002;1489-1514.
18. Hinton MJ. RARDE report; 1978.
19. Daniel I.M., LaBedz R.H., Liber T. New methods for testing composites at very high strain-rates. Exp Mech. 21:1981;71-77.
20. Daniel I.M., Hamilton W.G., LaBedz R.H. Strain-rate characterisation of unidirectional graphite/epoxy composites. Daniel I.M. Composite materials: testing and design (Sixth Conference), ASTM STP 787. 1982;393-413 American Society for Testing and Materials.
21. Kellas S, Morton J, Jackson KE. An evaluation of the ±45 tensile test for the determination of the in-plane shear strength of composite materials. In: ICCM-VIII, Paper 36-M.
22. Yeow Y.T., Brinson H.F. Comparison of simple shear characterisation methods for composite laminates. Composites. 9:1978;49-55.
23. Sims D.F. In-plane shear stress-strain response of unidirectional composite materials. J Compos Mater. 1973;7.
24. Herakovich C.T., Schroedter R.D., Gasser A., Guitard L. Damage evolution in [±45]s laminates with fibre rotation. Compos Sci Technol. 60:2000;2781-2789.
25. Han Y.M., Hahn H.T. Ply cracking and property degradation of symmetric balanced laminates under general in-plane loading. Compos Sci Technol. 1989.
26. Kennedy J.M., Barnett T.R., Farley G.L. Experimental and analytical evaluation of a biaxial test for determining in-plane shear properties of composites. SAMPE Q. 24:(1):1992;28-37.
27. Soden P.D., Kaddour A.S., Hinton M.J. A comparison of the predictive capabilities of current failure theories for composite laminates. Compos Sci Technol. 58:1998;1225-1254.
28. Kaddour A.S., Soden P.D., Hinton M.J. Failure of ±55° filament wound composite tubes under biaxial compression. J Compos Mater. 32:(18):1998;1618-1645.
29. Hayman RJ, Stringer LJ, Hinton MJ. Delamination induced during the fabrication of thick fibre reinforced composites, p. 69. In: Fifth International Conference on Deformation and fracture of Composites; 18-19 March 1999, ImechE, London, UK.
30. Hashin Z, Bagchi D, Rosen BW. Nonlinear behaviour of fibre composite laminates. NASA CR-2313; April 1972.
31. Tsai SW. Theory of composites design, Think composites, Palo Alto; 1992.
32. Fleck N.A., Jelf P.M. Deformation and failure of carbon-fibre composite under combined shear and transverse loading. Act Metall Mater. 43:1995;3001-3007.
33. Swanson S.R., Christoforou A.P. Progressive failure in carbon/epoxy laminates under biaxial stress. Trans ASME, J Engng Mater Technol. 109:1987;12-16.
34. Kaddour AS, Hinton MJ, Al-Hassani STS. Dynamic shear stress strain curves extracted from angle ply tubular specimens, in preparation.
35. Reid SR, Soden PD, Li S. Effects of damage in laminated structures, Department of Mechanical Engineering, UMIST. Final Report, DRA contract No SMCFU/819; February 1999.
36. Hinton M.J., Kaddour A.S., Soden P.D. A comparison of the predictive capabilities of current failure theories for composite laminates, judged against experimental evidence. Compos Sci Technol. 62:2002;1725-1797.
37. Puck A., Schürmann H. Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol. 58:1998;1045-1067.