Ratchetting deformation of super-elastic and shape-memory NiTi alloys

Mechanics of Materials

Volumn 41, Issue 2, 2009, Pages 139-153

  Kang, Guozheng ^a   Kan, Qianhua ^a   Qian, Linmao ^a   Liu, Yujie ^a  

^a SOUTHWEST JIAOTONG UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

ABS RESINS; ALLOYS; AUSTENITE; CONSTITUTIVE MODELS; CYCLIC LOADS; DEFORMATION; DYNAMIC LOADS; LOADING; MARTENSITE; METALLIC COMPOUNDS; WEAR RESISTANCE;

APPLIED STRESSES; ASYMMETRICAL STRESSES; CYCLIC LOADINGS; CYCLIC TESTS; DISSIPATION ENERGIES; INDUCED MARTENSITES; LOADING CONDITIONS; LOADING TYPES; MEAN STRESSES; NITI ALLOYS; RATCHETTING; REVERSE TRANSFORMATIONS; REVERSIBLE TRANSFORMATIONS; ROOM TEMPERATURES; STRESS STRAINS; TRANSFORMATION STRESSES; UNIAXIAL STRESSES;

CERIUM ALLOYS;

EID: 56549092143     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechmat.2008.09.001     Document Type: Article

References (48)

1. Abdel-Karim M. Shakedown of complex structures according to various hardening rules. Int. J. Press. Vessels Pip. 82 (2005) 427-458
2. Abeyaratne R., and Kim S.J. Cyclic effects in shape memory alloys: a one-dimensional continuum model. Int. J. Solids Struct. 34 (1997) 3273-3289
3. Auricchio F., Reali A., and Stefanelli U. A three-dimensional model describing stress-induced solid phase transformation with permanent inelasticity. Int. J. Plasticity 23 (2007) 207-226
4. Bo Z., and Lagoudas D.C. Thermomechanical modeling of polycrystalline SMAs under cyclic loading, part III: evolution of plastic strains and two-way memory effect. Int. J. Eng. Sci. 37 (1999) 1141-1173
5. Brinson C., Schmidt I., and Lammering R. Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy: micro and macromechanical investigations via in situ optical microscopy. J. Mech. Phys. Solids 52 (2004) 1549-1571
6. Chen X., Jiao R., and Tian T. Research advances of ratchetting effects and cyclic constitutive models. Adv. Mech. 33 (2003) 461-470 (in Chinese)
7. Dlouhý A., Bojda O., Somsen C., and Eggeler G. Conventional and in-situ transmission electron microscopy investigations into multistage martensitic transformations in Ni-rich NiTi shape memory alloys. Mater. Sci. Eng. A 481-482 (2008) 409-413
8. Dolce M., and Cardone D. Mechanical behaviour of shape memory alloys for seismic application. Int. J. Mech. Sci. 43 (2001) 2631-2677
9. Duering T.W., Melton K.N., Stoekel D., and Wayman C.M. Engineering Aspects of Shape Memory Alloys (1990), Butterworth-Heinemann, London
10. Eggeler G., Horndogen E., Yawny A., Heckmann A., and Wagner M. Structural and functional fatigue of NiTi shape memory alloys. Mater. Sci. Eng. A 378 (2004) 24-33
11. Gall K., and Maier H.J. Cyclic deformation mechanisms in precipitated NiTi shape memory alloys. Acta Mater. 50 (2002) 4643-4657
12. Gall K., Tyber J., Wilkesanders G., Robertson S.W., Ritchie R.O., and Maier H.J. Effect of microstructure on the fatigue of hot-rolled and cold-drawn NiTi shape memory alloys. Mater. Sci. Eng. A 486 (2008) 389-403
13. Hamilton R.F., Sehitoglu H., Chumlyakov Y., and Maier H.J. Stress dependence of the hysteresis in single crystal NiTi alloys. Acta Mater. 52 (2004) 3383-3402
14. Hornbogen E., Mertinger V., and Wurzel D. Microstructure and tensile properties of two binary NiTi-alloys. Scripta Mater. 44 (2001) 171-178
15. Iadicola M.A., and Shaw J.A. The effect of uniaxial cyclic deformation on the evolution of phase transformation fronts in pseudoelastic NiTi wire. J. Intel. Mater. Syst. Struct. 13 (2002) 143-155
16. Kang G.Z. Ratchetting: recent progresses in phenomenon observation, constitutive modeling and application. Int. J. Fatigue 30 8 (2008) 1448-1472
17. Kang G.Z., Liu Y.J., and Li Z. Experimental study on ratchetting-fatigue interaction of SS304 stainless steel in uniaxial cyclic stressing. Mater. Sci. Eng. A 435-436 (2006) 396-404
18. Kang G.Z., and Liu Y.J. Uniaxial ratchetting and low-cycle fatigue failure of the steels with cyclic stabilizing or softening feature. Mater. Sci. Eng. A 472 (2008) 258-268
19. Kockar B., Karaman I., Kim J.I., Chumlyakov Y.I., Sharp J., and Yu C.J. Thermomechanical cyclic response of an ultrafine-grained NiTi shape memory alloy. Acta Mater. 56 (2008) 3630-3646
20. Kwofie S., and Chandler H.D. Fatigue life prediction under conditions where cyclic creep-fatigue interaction occurs. Int. J. Fatigue 29 (2007) 2117-2124
21. Lagoudas D.C., and Bo Z. Thermomechanical modeling of polycrystalline SMAs under cyclic loading, part II: material characterization and experimental results for a stable transformation cycle. Int. J. Eng. Sci. 37 (1999) 1205-1249
22. Lagoudas D.C., and Entchev P.B. Modeling of transformation-induced plasticity and its effect on the behavior of porous shape memory alloys, part I: constitutive model for fully dense SMAs. Mech. Mater. 36 (2004) 865-892
23. Lexcellent C., and Bourbon G. Thermodynamical model of cyclic behavior of Ti-Ni and Cu-Zn-Al shape memory alloys under isothermal undulated tensile tests. Mech. Mater. 24 (1996) 59-73
24. Lim T.J., and McDowell D.L. Cyclic thermomechanical behavior of a polycrystalline pseudoelastic shape memory alloy. J. Mech. Phys. Solids 50 (2002) 651-676
25. Liu Y., Xie Z., and VanHumbeeck J. Cyclic deformation of NiTi shape memory alloys. Mater. Sci. Eng. A 273-275 (1999) 673-678
26. Liu Y., and Xie Z.L. TEM in situ study of the pre-strained NiTi shape memory alloy - driving force for shape recovery?. Mater. Sci. Eng. A 361 (2003) 185-190
27. Malécot P., Lexcellent C., Foltête E., and Collet M. Shape memory alloys cyclic behavior: experimental study and modeling. J. Eng. Mater. Technol. 128 (2006) 335-345
28. Nemat-Nasser S., and Guo W.G. Superelastic and cyclic response of NiTi SMA at various strain rates and temperatures. Mech. Mater. 38 (2006) 463-474
29. Ohno N. Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity. Appl. Mech. Rev. 43 (1990) 283-295
30. Ohno N. Recent progress in constitutive modeling for ratchetting. Mater. Sci. Res. Int. 3 (1997) 1-9
31. Ohno N., and Wang J.D. Kinematic hardening rules with critical state of dynamic recovery: I. Formulation and basic features for ratchetting behaviour. Int. J. Plasticity 9 (1993) 375-390
32. Ohno N., and Wang J.D. Kinematic hardening rules with critical state of dynamic recovery: II. Application to experiments of ratchetting behaviour. Int. J. Plasticity 9 (1993) 391-403
33. Otsuka K., and Ren X. Recent development in the research of shape memory alloys. Intermetallics 7 (1999) 511-528
34. Otsuka K., and Wayman C.M. Shape Memory Materials (1998), Cambridge University Press, Cambridge
35. Paiva A., Savi M.A., Braga A.M.B., and Pacheco P.M.C.L. A constitutive model for shape memory alloys considering tensile-compressive asymmetry and plasticity. Int. J. Solids Struct. 42 (2005) 3439-3457
36. Peng X., Pi W., and Fan J. A microstructure-based constitutive model for the pseudoelastic behavior of NiTi SMAs. Int. J. Plasticity 24 (2008) 966-990
37. Predki W., Klönne M., and Knopik A. Cyclic torsional loading of pseudoelastic NiTi shape memory alloys: damping and fatigue failure. Mater. Sci. Eng. A 417 (2006) 182-189
38. Saadat S., Saliche J., Noori M., Hou Z., and Davoodi H. Promises for structural vibration control (SVC) using shape memory alloys. Int. J. Mech. Sci. 43 (1999) 2631-2656
39. Sehitoglu H., Jun J., Zhang X., Karaman I., Chumlyakov Y., Maier H.J., and Gall K. Shape memory and pseudoelastic behavior of 51.5% Ni-Ti single crystals in solutionized and overaged state. Acta Mater. 49 (2001) 3609-3620
40. Sehitoglu H., Anderson R., Karaman I., Gall K., and Chumlyakov Y. Cyclic deformation behavior of single crystal NiTi. Mater. Sci. Eng. A 314 (2001) 67-74
41. Sehitoglu H., Efstathiou C., Maier H.J., and Chumlyakov Y. Hysteresis and deformation mechanisms of transforming FeNiCoTi. Mech. Mater. 38 (2006) 538-550
42. Strnadel B., Ohashi S., Ohtsuka H., Ishihara T., and Miyazaki S. Cyclic stress-strain characteristics of Ti-Ni and Ti-Ni-Cu shape memory alloys. Mater. Sci. Eng. A 202 (1995) 148-156
43. Strnadel B., Ohashi S., Ohtsuka H., Miyazaki S., and Ishihara T. Effect of mechanical cycling on the pseudoelasticity characteristics of Ti-Ni and Ti-Ni-Cu alloys. Mater. Sci. Eng. A 203 (1995) 187-196
44. Tan G., and Liu Y. Comparative study of deformation-induced martensite stabilization via martensite reorientation and stress-induced martensite transformation in NiTi. Intermetallics 12 (2004) 373-381
45. Wada K., and Liu Y. Thermomechanical training and the shape recovery characteristics of NiTi alloys. Mater. Sci. Eng. A 481-482 (2008) 166-169
46. Xie Z.L., Liu Y., and Van Humbeeck J. Microstructure of NiTi shape memory alloy due to tension-compression cyclic deformation. Acta Mater. 46 (1998) 1989-2000
47. Yuan B., Chung C.Y., and Zhu M. Microstructure and martensitic transformation behavior of porous NiTi shape memory alloy prepared by hot isostatic pressing processing. Mater. Sci. Eng. A 382 (2004) 181-187
48. Zhang X.P., Liu H.Y., Yuan B., and Zhang Y.P. Superelasticity decay of porous NiTi shape memory alloys under cyclic strain-controlled fatigue conditions. Mater. Sci. Eng. A 481-482 (2008) 170-173