Recent progress in constitutive modeling for ratchetting

Materials Science Research International

Volumn 3, Issue 1, 1997, Pages 1-9

  Ohno, Nobutada ^a  

^a NAGOYA UNIVERSITY   (Japan)

Author keywords

Anisotropic hardening; Back stress; Constitutive model; Cyclic plasticity; Evolution equation; Ratchetting; Simulation

Indexed keywords

EID: 0002434715     PISSN: 13411683     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (66)

1. T. Inoue et al., Research on Inelastic Analysis of Thermal Ratchetting under Moving Temperature Distribution - Interim Report, Subcommittee on Inelastic Analysis of High Temperature Materials, JSMS, Kyoto (1995).
2. T. Inoue et al., Research on Inelastic Analysis of Thermal Ratchetting under Moving Temperature Distribution - Final Report, Subcommittee on Inelastic Analysis of High Temperature Materials, JSMS, Kyoto (1997).
3. J. Bree, J. Strain Anal., 2 (1967) 226.
4. W. Prager, J. Appl. Phys., 20 (1949) 235.
5. J.F. Besseling, Trans. ASME, J. Appl. Mech., 25 (1958) 529.
6. P.J. Armstrong and C.O. Frederick, CEGB Report RD/B/N731, Berkeley Nuclear Laboratories, Berkeley (1966).
7. Z. Mróz, J. Mech. Phys. Solids, 15 (1967) 163.
8. K.C. Valanis, Arch. Mech., 23 (1971) 517.
9. K.C. Valanis, Arch. Mech., 32 (1980) 171.
10. G. Backhaus, Zeitschr. Angen. Math. Mech., 56 (1976) 337.
11. R.D. Krieg, Trans. ASME, J. Appl. Mech., 42 (1975) 641.
12. Y.F. Dafalias and E.P. Popov, Trans. ASME, J. Appl. Mech., 43 (1976) 645.
13. E.P. Cernocky and E. Krempl, Acta Mech., 36 (1980) 263.
14. T. Inoue, N. Ohno, A. Suzuki and T. Igari, Nucl. Eng. Design, 114 (1989) 295.
15. T. Inoue, F. Yoshida, N. Ohno, M. Kawai, Y. Niitsu and S. Imatani, Nucl. Eng. Design, 126 (1991) 1.
16. N. Ohno, Appl. Mech. Rev., 43 (1990) 283.
17. H. Burlet and G. Cailletaud, Proc. 2nd Int. Conf. on Constitutive Laws for Engineering Materials: Theories and Applications, (ed. by C.S. Desai, E. Krempl, P.D. Kiousis and T. Kundu), Elsevier, New York (1987) 1157.
18. J.L. Chaboche, Int. J. Plasticity, 7 (1991) 661.
19. N. Ohno and J.-D. Wang, Int. J. Plasticity, 9 (1993) 375.
20. J.L Chaboche, K. Dang Van and G. Cordier, Trans. 5th Int. Conf. on Structural Mechanics in Reactor Technology, Vol. L, North-Holland, Amsterdam (1979) Paper No. L 11/3.
21. J.L. Chaboche and G. Rousselier, Trans. ASME, J. Pressure Vessel Tech., 105 (1983) 153.
22. J.L. Chaboche and G. Rousselier, Trans. ASME, J. Pressure Vessel Tech., 105 (1983) 159.
23. J.L. Chaboche, Int. J. Plasticity, 2 (1986) 149.
24. J.L. Chaboche, Int. J. Plasticity, 5 (1989) 247.
25. J.L. Chaboche and D. Nouailhas, Trans. ASME, J. Eng. Mat. Tech., 111 (1989) 384.
26. J.L. Chaboche and D. Nouailhas, Trans. ASME, J. Eng. Mat. Tech., 111 (1989) 409.
27. A.D. Freed and K.P. Walker, NASA Report TM-102509, NASA, Cleveland (1990).
28. N. Ohno and J.-D. Wang, Int. J. Plasticity, 9 (1993) 391.
29. E. Tanaka, S. Murakami, M. Mizuno, H. Yamada and K. Iwata, Proc. 6th Int. Conf. on Mechanical Behavior of Materials, (ed. by M. Jono and T. Inoue), Vol. 3, Pergamon Press, Oxford (1991) 781.
30. D. Marquis, These Paris VI (1979).
31. O. Watanabe and S.N. Atluri, Int. J. Plasticity, 2 (1986) 37.
32. N. Ohno and J.-D. Wang, Int. J. Plasticity, 7 (1991) 879.
33. N. Ohno and J.-D. Wang, Eur. J. Mech., A/Solids, 13 (1994) 519.
34. J.L. Chaboche, Eur. J. Mech., A/Solids, 13 (1994) 501.
35. Y. Jiang and P. Kurath, Int. J. Plasticity, 12 (1996) 387.
36. Y. Jiang and H. Sehitoglu, Trans. ASME, J. Appl. Mech., 63 (1996) 720.
37. Y. Jiang and H. Sehitoglu, Trans. ASME, J. Appl. Mech., 63 (1996) 726.
38. T. Hassan, E. Corona and S. Kyriakides, Int. J. Plasticity, 8 (1992) 117.
39. G.Z. Voyiadjis and I.N. Basuroychowdhury, Acta Mech., (in press).
40. T. Hassan and S. Kyriakides, Int. J. Plasticity, 8 (1992) 91.
41. G.Z. Voyiadjis and S.M. Sivakumar, Acta Mech., 90 (1991) 105.
42. G.Z. Voyiadjis and S.M. Sivakumar, Acta Mech., 107 (1994) 117.
43. Z. Mróz and P. Rodzik, Eur. J. Mech., A/Solids, 15 (1996) 1.
44. M.B. Ruggles and E. Krempl, Trans. ASME, J. Eng. Mat. Tech., 111 (1989) 378.
45. K. Sasaki and H. Ishikawa, Trans. JSME, Sci. A, 59 (1993) 1451.
46. P. Delobelle, P. Robinet and L. Bocher, Int. J. Plasticity, 11 (1995) 295.
47. M. Kobayashi, M. Abdel Karim and N. Ohno, Proc. 34th Symposium on Strength of Materials at High Temperatures, JSMS, Kyoto (1996) 114.
48. J.-D. Wang and N. Ohno, Math. Modelling Sci. Computing, 5 (1995) 231.
49. Y. Jiang and H. Sehitoglu, Int. J. Plasticity, 10 (1994) 579.
50. Y. Jiang and H. Sehitoglu, Int. J. Plasticity, 10 (1994) 849.
51. D.L. McDowell, Int. J. Plasticity, 11 (1995) 397.
52. P. Gayer, B. Autrusson, C. Guionnet, P. Matheron, M.T. Cabrillat and S. Taheri, Proc. Plasticity '95, (ed. by S. Tanimura and A.S. Khan), Gordon and Breach Publishers, Luxembourg (1995) 597.
53. A.M. Goodman, Non-Linear Problems in Stress Analysis, (ed. by P. Stanley), Applied Science Publishers, London (1977) 317.
54. A.R.S. Ponter and S. Karadeniz, Trans. ASME, J. Appl. Mech., 52 (1985) 877.
55. A.R.S. Ponter and S. Karadeniz, Trans. ASME, J. Appl. Mech., 52 (1985) 883.
56. S. Karadeniz, A.R.S. Ponter and K.F. Carter, Trans. ASME, J. Pressure Vessel Tech., 109 (1987) 387.
57. H. Wada, T. Igari and S. Kitade, Trans. JSME, Ser. A, 55 (1989) 985.
58. T. Igari, M. Yamauchi, S. Kitade, K. Kawasaki, H. Wada and Y. Kamishima, Trans. JSME, Ser. A, 56 (1990) 1217.
59. M. Kobayashi and N. Ohno, Int. J. Plasticity, 12 (1996) 255.
60. M. Kobayashi, N. Ohno and T. Igari, Proc. M & M '96, Vol.B, JSME, Tokyo (1996) 191.
61. N. Ohno, M. Abdel Karim, M. Kobayashi and T. Igari, Trans. JSME, Ser. A, (in press).
62. Y. Takahashi and K. Tanimoto, Proc. Plasticity '95, (ed. by M. Jono and T. Inoue), Gordon and Breach Publishers, Luxembourg (1995) 653.
63. K. Iwata, Nucl. Eng. Design, 139 (1993) 319.
64. N. Ohno and M. Kobayashi, Eur. J. Mech., A/Solids, 15, (in press).
65. E. Shiratori, K. Ikegami and Y. Yoshida, J. Mech. Phys. Solids, 27 (1979) 213.
66. E. Corona, T. Hassan and S. Kyriakides, Int. J. Plasticity, 12 (1996) 117.