Shakedown of complex structures according to various hardening rules

International Journal of Pressure Vessels and Piping

Volumn 82, Issue 6, 2005, Pages 427-458

  Abdel Karim, Mohammad ^a,b  

^a CAIRO UNIVERSITY   (Egypt)

^b UNIVERSITY OF MARYLAND BALTIMORE COUNTY   (United States)

Author keywords

Complex structures; Hardening rules; Ratchetting; Shakedown; Thermal ratchetting

Indexed keywords

HARDENING; LAWS AND LEGISLATION;

COMPLEX STRUCTURES; HARDENING RULES; KINEMATIC HARDENING; SHAKEDOWN PROBLEMS;

STRUCTURES (BUILT OBJECTS);

HARDENING;

EID: 16244409488     PISSN: 03080161     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijpvp.2005.01.007     Document Type: Review

References (254)

1. J. Bree Elastic plastic behavior of thin tubes subjected to internal pressure and intermittent high heat fluxes with application to fast nuclear reactor fuel elements J Strain Anal 2 3 1967 226-238
2. J. Bree Plastic deformation of a closed tube due to interaction of pressure stresses and cyclic thermal stresses Int Mech Sci 31 11-12 1989 865-892
3. M. Gruning Die Tragfahigkeit statisch unbestimmter Tragwerke aus Stahl bei beliebig haufig wiederholter Belastung 1929 Springer Berline
4. E. Melan Theorie statisch unbestimmter systeme aus ideal-plastischem Baustoff Sitber Akad Wiss, Wien, Abt IIA 145 1936 195-218
5. E. Melan Zur Plastizitat des Raumlichen Kontinuums Ing Arch 9 1938 116-126
6. W.T. Koiter Some remarks on plastic shakedown theorems Proc Engl Int Congr Appl Mech Istanbul 1952 220-230
7. M. Heitzer M. Staat Basis reduction technique for limit and shakedown problems Pub Ser John von Neumann Institute for Computing (NIC) 15 2003 1-57
8. B.G. Neal Plastic collapse and shake-down theorems for structures of strain-hardening materials J Aeronaut Sci 17 1950 297-306
9. A.R.S. Ponter A general shakedown theorem for elastic-plastic bodies with workhardening Third International Conference on SMiRT, Paper L5/2, London 1975
10. J. Zarka J. Casier Elastic-plastic response of a structure to cyclic loading: Practical rules In: S. Nemat-Nasser editor. Mechanics today vol. 6 1981 Pergamon Oxford p 193
11. G. Maier A shakedown matrix theory allowing for workhardening and second-order geometric effects In: A. Sawczuk editor. Proceedings of the symposium foundations of plasticity, Seiten 417-433. Noordho., Leyden
12. J.D. Meyer Shakedown of strain-hardening structures J Struct Division 98 1 1972 95-110
13. J.A. Konig A. Siemaszko Strain hardening effects in shakedown process Ing Arch 58 1988 58-66
14. B. Halphen Q.S. Nguyen Sur les materiaux standards generalizes J Mech 14 1975 39-63
15. J. Mandel Adaptation d'une structure plastique wcrouissable et approximatios Mech Res Commun 3 4 1976 251-256
16. D. Weichert J. Gross-Weege The numerical assessment of elastic-plastic sheets under variable mechanical and thermal loads using a simplified two-surface yield condition Int J Mech Sci 30 10 1988 757-767
17. J. Zarka F.C. Arnaudeau J. Casier G. Baylac A practical method to determine elastic or plastic shakedown of structures ASME/CSME pressure vessels and piping conference, Montreal 1978 p. 47-60
18. W. Jiang A. Leckie A direct method for shakedown analysis of structures under sustained and cyclic loads ASME J Appl Mech 59 2/1 1992 251-260
19. L. Khalij S. Hariri R. Vaucher Shakedown of three-dimentional structures under cyclic loading with the simplified analysis Comput Mater Sci 24 3 2002 393-400
20. C. Comi A. Corigliano Dynamic shakedown in elastoplastic structures with general internal variable constitutive laws Int J Plast 7 7 1991 679-692
21. C. Polizzotto G. Borino S. Caddemi P. Fuschi Shakedown problems for material models with internal variables Eur J Mech A/Solids 10 6 1991 621-639
22. G. Maier Shakedown of plastic structures with unstable parts ASCE J Eng Mech Division 98 N.EM5 1972 1322-1333
23. E. Stein G. Zhang Y. Huang Modeling and computation of shakedown problems for nonlinear hardening materials Comp Methods Appl Mech Eng 103 1993 247-272
24. X.Q. Feng X.S. Liu On shakedown of three-dimensional elastoplastic strain-hardening structures Int J Plast 12 10 1996 1241-1256
25. Q.S. Nguyen D.C. Pham On shakedown theorems in hardening plasticity Comptes Rendus de l'Academie des Science-Series IIB-Mechanics 329 5 2001 307-314
26. M. Staat Some achievements of the European project LISA and FEM based limit and shakedown analysis ASME, PVP2002 Conference, Paper No. 1300, Vancouver, BC Canada August 2002
27. M. Heitzer M. Staat F. Schubert Shakedown and ratchetting under tension-torsion loadings: Analysis and experiments Nucl Eng Des 225 1 2003 11-26
28. A. Corigliano G. Maier S. Pycko Dynamic shakedown analysis and bounds for elastoplastic structures with nonassociative internal variable constitutive laws Int J Solids Struct 32 21 1995 3145-3166
29. B. Druyanov I. Roman Concept of the limit yield condition in shakedown theory Int J Solids Struct 34 13 1997 1547-1556
30. Q.S. Nguyen On shakedown analysis in hardening plasticity J Mech Phys Solids 51 1 2003 101-125
31. G. Maier Shakedown theory in perfect elastoplasticity with associated and nonassociated flow-laws: A finite element, linear programming approach Mecanica 4 1969 250-260
32. C.D. Drucker Conventional and un conventional plastic response and representation Appl Mech Rev 41 4 1988 151-167
33. S. Pycko G. Maier Shakedown theorems for some classes of nonassociative hardening elastic-plastic material models Int J Plast 11 4 1995 367-395
34. B. Guillaume G. DeSaxce Plasticity with non-linear kinematic hardening: modeling and shakedown analysis by the bipotential approach Eur J Mech A/ Solids 20 1 2001 99-112
35. L. Bousshine A. Chabba G. DeSaxce A new approach to shakedown analysis for non-standard elastoplastic material by the bipotential Int J Plast 19 5 2003 583-598
36. A. Hachemi D. Weichert An extension of the static shakedown theorem to a certain class of inelastic materials with damage Arch Mech 44 1992 419-498
37. J.W. Ju On energy-based coupled elastoplastic damage theories: constitutive modeling and computational aspects Int J Solids Struct 25 7 1989 803-833
38. J. Lemaitre J.L. Chaboche Mechanique des materiaux Solids Dunod 1985 [Paris]
39. X.Q. Feng S.W. Yu Damage and shakedown analysis of structures with strain-hardening Int J Plast 11 3 1995 237-249
40. C. Polizzotto G. Borino P. Fuschi An extended shakedown theory for elastic-plastic-damage material models Eur J Mech A/Solids 15 5 1996 825-858
41. A. Siemaszko Inadaptation analysis with hardening and damage Eur J Mech A/Solids 12 1993 237-248
42. P. Perzyna Constitutive modeling of dissipative solids for postcritical behaviour and fracture ASME J Eng Mater Tech 106 4 1984 410-419
43. B. Druyanov I. Roman Conditions for shakedown of damaged elastic plastic bodies Int J Mech A/Solids 18 4 1999 641-651
44. Y. Huang E. Stein Shakedown of a cracked body consisting of kinematic hardening material Eng Fracture Mech 54 1 1996 107-112
45. X.Q. Feng D. Gross A global/local shakedown analysis method of elastoplastic cracked structures Eng Fracture Mech 63 2 1999 179-192
46. M.A. Belouchrani D. Weichert An extension of the static shakedown theorem to inelastic cracked structures Int J Mech Sci 41 2 1999 163-177
47. A. Hachemi D. Weichert Application of shakedown theory to damaging inelastic material under mechanical and thermal loads Int J Mech Sci 39 9 1997 1067-1076
48. I. Sattari-Far P. Dillstrom Local limit load solution for surface cracks in plates and cylinders using finite element analysis Int J Press Vessel Pip 81 1 2004 57-66
49. D. Weichert A. Hachemi F. Scheabe Shakedown analysis of composites Mech Res Commun 26 3 1999 309-318
50. A. Hachemi D. Weichert On the problem of interfacial damage in fibre-reinforced composites under variable loads Mech Res Commun 32 1 2005 15-23
51. D. Weichert A. Hachemi Influence of geometrical nonlinearties on the shakedown of damaged structures Int J Plast 14 9 1998 891-907
52. X. Mingde W. XianFeng X. Bingye Lower-bound shakedown analysis of spherical shells containing defects Int J Plast 68 3 1996 287-292
53. A. Siemaszko J.A. Konig Analysis of stability of incremental collapse of skeletal structures J Struct Mech 13 1985 301-321
54. D. Weichert Shakedown at finite displacement; a note on Melan's theorem Mech Res Commun 11 2 1984 121-127
55. D. Weichert On the influence of geometrical nonlinearties on the shakedown of elastic-plastic structures Int J Plast 2 2 1986 135-148
56. D. Weichert Shakedown of shell-like structures allowing for certain geometrical nonlinearties Arch Mech 41 1989 61-71
57. J. Gross-Weege A unified formulation of statical shakedown criteria for geometrically nonlinear problems Int J Plast 6 4 1990 433-447
58. S. Pycko J.A. Konig Steady plastic cycles on reference configuration in the presence of second-order geometric effects Eur J Mech A/Solids 10 6 1991 563-574
59. C. Polizzotto G. Borino Shakedown and steady-state responses of elastic-plastic bodies in large displacements Int J Solids Struct 33 23 1996 3415-3437
60. Saczuk J, Stump H. On statical shakedown theorem for non-linear problems. IFM-Report, No. 74, Ruhr-Universitat, Bochum; 1990.
61. Tritsch JB. Analyse d'Adaptation des structures elasto-plastique avec prise en compte des effect geometriques. PhD Dissertation. University of Science and Technologies, Lille; 1993.
62. J.B. Tritsch D. Weichert Shakedown of elastic-plastic structures at finite deformation - a comparative study of static shakedown theorems Z Angew Math Mech 73 1993 309-312
63. H. Stumpf Theoretical and computational aspects in the shakedown analysis of finite elastoplasticity Int J Plast 9 5 1993 583-602
64. D.J. Yeom M. Robinson Numerical analysis of elastic-plastic behaviour of pressure vessels with ellipsoidal and torispherical heads Int J Press Vessel Pip 65 2 1996 147-156
65. A. Hachemi D. Weichert Numerical shakedown analysis of damaged structures Comp Methods Appl Mech Eng 160 1-2 1998 57-70
66. G. Borino C. Polizzotto Dynamic shakedown of structures with variable appended masses and subjected to repeated excitations Int J Plast 12 2 1996 215-225
67. J. Yang R. Gurdal Piping elbow cyclic analysis for shakedown verification ASME, PVP2003 Conference, Paper No. 1770, Cleveland, Ohio USA July 2003
68. R.A. Ainsworth Bounding solutions for creeping structures subjected to load variations above the shakedown limit Int J Solids Struct 13 10 1977 971-980
69. A.C.F. Cocks A.R.S. Ponter Cyclic thermal loading in the creep range. II. High levels of thermal loading Int J Solids Struct 21 2 1985 207-223
70. J.M. Klebanov J.T. Boyle Shakedown of creeping structures Int J Solids Struct 35 23 1998 3121-3133
71. H.F. Chen M.J. Engelhardt A.R.S. Ponter Linear matching method for creep rupture assessment Int J Press Vessel Pip 80 4 2003 213-220
72. H.F. Chen A.R.S. Ponter Shakedown and limit analyses for 3-D structures using the linear matching method Int J Press Vessel Pip 78 6 2001 443-451
73. A.R.S. Ponter P. Fuschi M. Engelhardt Limit analysis for a generalclass of yield conditions Eur J Mech A/Solids 19 3 2000 401-421
74. A.R.S. Ponter M. Engelhardt Shakedown limits for a general yield condition Eur J Mech A/Solids 19 3 2000 423-445
75. H.F. Chen A.R.S. Ponter A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading Eur J Mech A/Solids 20 4 2001 555-571
76. A.R.S. Ponter H.F. Chen M. Boulbibane M. Habibullah The linear matching method for the evaluation of limit loads, shakedown limits and related problems Fifth world congress on computational mechanics, Vienna, Austria July 7-12, 2002
77. A.R.S. Ponter H.F. Chen M. Habibullah Computaion of ratchet limits for structures subjected to cyclic loading and temperature ASME pressure vessel and piping conference, Vancouver, British Columbia, Canada August 4-8, 2002
78. A.R.S. Ponter F.A. Leckie On the behaviour of metal matrix composites subjected to cyclic thermal loading Int J Mech Phys Solids 46 11 1998 2183-2199
79. M.M. Megahed Influence of hardening rule on the elasto-plastic behavior of a simple structure under cyclic loading Int J Mech Sci 23 3 1981 169-182
80. A.R.S. Ponter S. Karadeniz An extended shakedown theory for structures that suffer cyclic thermal loading. Part 1: Theory ASME J Appl Mech 52 4 1985 877-882
81. A.R.S. Ponter S. Karadeniz An extended shakedown theory for structures that suffer cyclic thermal loading. Part 2: Applications ASME J Appl Mech 52 4 1985 883-888
82. W. Jiang Shakedown analysis of hollow spheres J Eng Mech 120 7 1994 1447-1480
83. A. Nayebi R. ElAbdi Cyclic plastic and creep behaviour of pressure vessels under thermomechanical loading Comp Mater Sci 25 3 1998 285-296
84. G. Borino Consistent shakedown theorems for materials with temperature dependent yield functions Int J Solids Struct 37 22 2000 3121-3147
85. J. Kamenjarzh D. Weichert On kinematic upper bounds for the safety factor in shakedown theory Int J Plast 8 7 1992 827-837
86. J. Kamenjarzh A. Merzljakov On kinematic method in shakedown theory: I and II Int J Plast 10 4 1994 363-380
87. P.D. Chinh Dynamic shakedown and reduced kinematic theorem Int J Plast 12 8 1996 1055-1068
88. P.D. Chinh Shakedown kinematic theorem for elastic-perfectly plastic bodies Int J Plast 17 5 2001 773-780
89. G. Bodoville A kinematic elastic nonshakedown theorem for implicit standard materials Arch Appl Mech 72 4-5 2003 266-278
90. J.R.Q. Franco A.R.S. Ponter F.B. Barros Adaptive FE method for the shakedown and limit analysis of pressure vessels Eur J Mech A/Solids 22 4 2003 525-533
91. V.D. Khoi A.M. Yan N.D. Huang A dual form for discretized kinematic formulation in shakedown analysis Int J Solids Struct 41 1 2004 267-277
92. R. Hill The mathematical theory of plasticity 1950 Oxford University Press UK
93. N. Ohno Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity Appl Mech Rev 43 11 1990 283-295
94. S. Bari T. Hassan An advancement in cyclic plasticity modeling for multiaxial ratchetting simulation Int J Plast 18 7 2002 873-894
95. W. Prager A new method of analyzing stresses and strains in work hardening plastic solids ASME J Appl Mech 23 1956 493-496
96. Abdel-Karim M. Prediction of inelastic behaviour under non-proportional loading histories using various plastic and viscoplastic theories. MSc Thesis. Cairo University; 1992.
97. S. Bari T. Hassan Anatomy of coupled constitutive models for ratchetting simulation Int J Plast 16 3-4 2000 381-409
98. A. Phillips C.W. Lee Yield surfaces and loading surfaces. Experiments and recommendations Int J Solids Struct 15 9 1979 715-729
99. Z. Mroz An attempt to describe the behavior of metals under cyclic loads using a more general work hardening model Acta Mech 7 1969 199-212
100. R.D. Krieg A practical two-surface plasticity theory ASME J Appl Mech 42 3 1975 641-646
101. Y.F. Dafalias E.P. Popov Plastic internal variables formalism of cyclic plasticity ASME J Appl Mech 43 4 1976 645-651
102. D.L. McDowell A two surface model for transient nonproportional cyclic plasticity ASME J Appl Mech 52 1985 298-308
103. N. Otno Y. Kachi A constitutive model of cyclic plasticity for nonlinear hardening materials ASME J Appl Mech 53 2 1986 395-403
104. N. Ohno J.-D. Wang Kinematic hardening rules with critical state of dynamic recovery Int J Plast 9 3 1993 375-390
105. J.F. Besseling A theory of elastic, plastic and creep deformations of an isotropic material ASME J Appl Mech 25 1958 529-536
106. Armstrong PJ, Frederick CO. A mathematical representation of the multiaxial bauschinger effect. CEGB Report RD/B/N731, Berkeley Nuclear Laboratories, Berkeley, UK; 1966.
107. J.L. Chaboche K. Dang-Van G. Cordier Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel Fifth International Conference on SMiRT, L, Berline, Germany 1979
108. J.L. Chaboche Modeling of ratchetting: Evaluation of various approaches Eur J Mech A/Solids 13 4 1994 501-518
109. N. Ohno Constitutive modeling of cyclic plasticity with emphasis on ratchetting Int J Mech Sci 40 2-3 1998 251-261
110. H. Burlet G. Cailletaud Numerical techniques for cyclic plasticity at variable temperature Eng Comput 3 1986 143-153
111. C. Guionnet Modeling of ratchetting in biaxial experiments ASME J Eng Mater Tech 114 1 1992 56-62
112. M. Abdel-Karim N. Ohno Uniaxial ratchetting characteristics of 316FR steel at room temperature (2nd report, simulation based on constitutive models) Trans Jpn Soc Mech Eng JSME, Ser A 64 628 1988 101-107 [in Japanese]
113. M. Abdel-Karim N. Ohno Kinematic hardening model suitable for ratchetting with steady state Int J Plast 16 3-4 2000 225-240
114. G.Z. Voyiadjis R.K. AbuAl-Rub Thermodynamic based model for the evolution equation of the backstress in cyclic plasticity Int J Plast 19 12 2003 2121-2147
115. X. Chen R. Jiao Modified kinematic hardening rule for multiaxial ratchetting prediction Int J Plast 20 4-5 2004 871-898
116. T. Inoue T. Igari Research on inelastic analysis of thermal ratchetting under moving temperature distribution - interim report Subcommittee on inelastic analysis of high temperature materials, The Society of Materials Science SMS, Japan 1995 [in Japanese]
117. T. Inoue T. Igari Research on inelastic analysis of thermal ratchetting under moving temperature distribution - final report Subcommittee on inelastic analysis of high temperature materials, The Society of Materials Science SMS, Japan 1997 [in Japanese]
118. M. Yaguchi Y. Takahash Ratchetting of viscoplastic material with cyclic softening, part 2: Application of constitutive models Int J Plast 21 4 2005 835-860
119. M. Yaguchi Y. Takahash Ratchetting of viscoplastic material with cyclic softening, part 1: Experiments on modified 9Cr-1Mo steel Int J Plast 21 2005 43-65
120. C. Gaudin X. Feaugas Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses Acta Mater 52 10 2004 3097-3110
121. C. Gaudin X. Feaugas Ratchetting process in the stainless steel AISI 316L at 300 K: An experimental investigation Int J Plast 20 4-5 2004 643-662
122. S.C. Kulkarni Y.M. Desai T. Kant G.R. Reddy P. Prasad K.K. Vaze et al. Uniaxial and biaxial ratchetting in piping materials - experiments and analysis Int J Press Vessel Pip 81 7 2004 609-617
123. S.C. Kulkarni Y.M. Desai T. Kant G.R. Reddy Y. Parulekar K.K. Vaze Uniaxial and biaxial ratchetting study of SA333 Gr 6 steel at room temperature Int J Press Vessel Pip 80 3 2003 179-185
124. L. Vincent S. Calloch D. Marquis A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratchetting Int J Plast 20 10 2004 1817-1850
125. R. Döring J. Hoffmeyer T. Seeger M. Vormwald A plasticity model for calculating stress-strain sequences under multiaxial nonproportional cyclic loading Comput Mater Sci 28 3-4 2003 587-596
126. L. Bocher P. Delobelle P. Robinet X. Feaugas Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension-torsion - internal and external pressure Int J Plast 17 11 2001 1491-1530
127. B. Postberg E. Weiß Simulation of ratcheting of AISI 316L(N) steel under nonproportional uniaxial loading and high number of load cycles using the Ohno and Wang nonlinear kinematic material model Int J Press Vessel Pip 77 5 2000 207-213
128. L. Portier S. Calloch D. Marquis P. Geyer Ratchetting under tension-torsion loadings: Experiments and modeling Int J Plast 16 3-4 2000 303-335
129. S. Taheri E. Lorentz An elastic-plastic constitutive law for the description of uniaxial and multiaxial ratchetting Int J Plast 15 11 1999 1159-1180
130. N. Ohno M. Abdel-Karim M. Kobayashi T. Igari Ratchetting characteristics of 316FR steel at high temperature, part I: Strain-controlled ratchetting experiments and simulations Int J Plast 14 4-5 1998 355-372
131. E. Corona T. Hassan S. Kyriakids On the performance of kinematic hardening rules in predicting a class of biaxial ratchetting experiments Int J Plast 12 1 1996 117-145
132. Y. Jiang H. Sehitoglu Cyclic ratchetting of 1070 steel under multiaxial stress states Int J Plast 10 5 1994 579-608
133. Y. Jiang H. Sehitoglu Multiaxial cyclic ratchetting under multiple step loading Int J Plast 10 8 1994 849-870
134. T. Hassan S. Kyriakids Ratchetting of cyclically hardening and softening materials. I. Uniaxial behavior Int J Plast 10 2 1994 149-184
135. T. Hassan S. Kyriakids Ratchetting of cyclically hardening and softening materials. II. Multiaxial behavior Int J Plast 10 2 1994 185-212
136. T. Hassan S. Kyriakids Ratchetting in cyclic plasticity, part I: uniaxial behavior Int J Plast 8 1 1992 91-116
137. T. Hassan S. Kyriakids Ratchetting in cyclic plasticity, part II: multiaxial behavior Int J Plast 8 2 1992 117-137
138. H. Hübel Basic conditions for material and structural ratcheting Nucl Eng Des 162 1 1996 55-65
139. T. Igari M. Kobayashi F. Yoshida S. Imatani T. Inoue Inelastic analysis of new thermal ratchetting due to a moving temperature front Int J Plast 18 9 2002 1191-1217
140. R.L. Roche D. Moulin J. Lebey Practical analysis of ratchetting Nucl Eng Des 71 1 1982 51-66
141. H.Y. Lee J.B. Kim J.H. Lee Thermal ratchetting deformation of a 316L stainless steel cylindrical structure under an axial moving temperature distribution Int J Press Vessel Pip 80 1 2003 41-48
142. A.M. Goodman Incremental plastic deformation of a cylinder subjected to cyclic thermal loading In: P. Stenley editor Non-linear problems in stress analysis 1977 Applied Science Publishers London p 317-344
143. S. Karadeniz A.R.S. Ponter K.F. Carter Plastic ratchetting of thin cylindrical shells subjected to axisymmetric thermal and mechanical loading ASME J Press Vessel Tech 109 4 1987 387-393
144. H. Wada T. Igari S. Kitade Prediction method for thermal ratchetting of a cyclinder subjected to axially moving temperature distribution Trans Jpn Soc Mech Eng JSME, Ser A 55 1989 985-993 [in Japanese]
145. T. Igari M. Yamauchi S. Kitade K. Kawasaki H. Wada Y. Kamishima Ratchetting behavior of cylinder subjected to thermal stress alone Trans Jpn Soc Mech Eng JSME, Ser A 56 1990 197-205 [in Japanese]
146. T. Igari S. Kitade M. Ueta M. Ichimiya K. Kimura Y. Satoh et al. Advanced evaluation of thermal ratchetting of FBR components Nucl Eng Des 140 3 1993 341-348
147. H. Wada H. Kaguchi M. Ueta M. Ichimiya K. Kimura Y. Fukuda et al. Proposal of a new estimation method for the thermal ratchetting of a cylinder subjected to moving temperature distribution Nucl Eng Des 139 3 1993 261-267
148. T. Igari H. Wada M. Ueta Mechanism-based evaluation of thermal ratchetting due to traveling temperature distribution ASME J Press Vessel Tech 122 2 2000 130-138
149. M. Kobayashi N. Ohno Thermal ratchetting of a cylinder subjected to a moving temperature front: Effects of kinematic hardening rules on the analysis Int J Plast 12 2 1996 255-271
150. M. Kobayashi N. Ohno T. Igari Ratchetting characteristics of 316FR steel at high temperature, part II: Analysis of thermal ratchetting induced by spatial variation of temperature Int J Plast 14 4-5 1998 373-390
151. M. Heitzer G. Pop M. Staat Basis reduction for the shakedown problem for unbounded kinematic hardening material J Global Opt 17 2000 182-200
152. H. Lang K. Wirtz M. Heitzer M. Staat R. Oettel Cyclic plastic deformation tests to verify FEM-based shakedown analysis Nucl Eng Des 206 2-3 2001 235-247
153. P.D. Chinh Shakedown theory for elastic-perfectly plastic bodies revisited Int J Mech Sci 45 6-7 2003 1011-1027
154. H. Mahbadi M.R. Eslami Cyclic loading of beams based on the Prager and Frederick-Armstrong kinematic hardening models Int J Mech Sci 44 5 2002 859-879
155. J. Wolters G. Breitbach M. Rodig H. Nickel Investigation of the ratchetting phenomenon for dominating bending loads Nucl Eng Des 174 3 1997 353-363
156. F.A. Leckie R.K. Penny Shakedown pressure for radial nozzles in spherical pressure vessels Int J Solids Struct 3 5 1967 743-55
157. P. Preiss On the shakedown analysis of nozzles using elasto-plastic FEA Int J Press Vessel Pip 76 7 1999 421-34
158. Comite' Europeen de Normalization (CEN) Design by analysis manual 1999 Europeen Commissio, Petten The Netherlands
159. A. Kalnins Plastic analysis in pressure vessel design-role of limit analysis and cyclic loading ASME PVP conference, Seattle, USA 2000
160. D. Mackenzie J.T. Boyle The elastic compensation method for limit and shakedown analysis: A review Trans ImechE, J Strain Anal Eng Des 35 3 2000 421-34
161. Attia MSA. Numerical and experimental investigations of shakedown loads for structures with severe geometrical discontinuities. MSc Thesis. Cairo University; 2000.
162. A.R.R. Ponter H. Chen A minimum theorem for cyclic load in excess of shakedown, with application to the evaluation of a ratchet limit Eur J Mech A/Solids 20 4 2001 539-53
163. R. Casciaro G. Garcea An iterative method for shakedown analysis Comp Meth Appl Mech Eng 191 49-50 2002 5761-92
164. T. Belytschko Plane stress shakedown analysis by finite elements Int J Mech Sci 6 1 1972 35-40
165. L. Corradi A. Zavelani A linear programming approach to shakedown analysis of structures Comp Meth Appl Mech Eng 3 1974 37-53
166. M. Muscat R. Hamilton Elastic shakedown in pressure components under non-proportional loading ASME, PVP2002 Conference, Paper No. 1522, Vancouver, BC Canada August 2002
167. C. Polizzotto Shakedown of elastic-plastic solids with frictionless unilateral contact boundary conditions Int J Mech Sci 39 7 1997 819-28
168. M. Muscat D. Mackenzie R. Hamilton Evaluating shakedown under proportional loading by non-linear static analysis Comp Struct 81 2003 1727-37
169. E. Stein G. Zhang J.A. Konig Shakedown with nonlinear strain-hardening including structural computation using finite element method Int J Plast 8 1 1992 1-31
170. Y.G. Zhang An iteration algorithm for kinematic shakedown analysis Comp Meth Appl Mech Eng 127 1995 217-26
171. A. Makrodimopoulos C. Bisbos Shakedown analysis of plane stress problems via SOCP Pub Ser John von Neumann Institute for Computing (NIC) 15 2003 185-216
172. Attia MS, Abdel-Karim M, Megahed M. Shakedown analysis of an infinite plate with a central hole under biaxial tension. International MDP-7 Conference, Cairo, Egypt; February 2000.
173. R. Hamilton J.T. Boyle J. Shi D. Mackenzie Shakedown load bounds by elastic finite element analysis ASME Mech Eng Congr Expos, PVP 343 1996 205-11
174. E. Stein Y. Huang An analytical method for shakedown problems with linear kinematic hardening materials Int J Solids Struct 31 18 1994 2433-44
175. T.H. Hyde B.B. Sahari J.J. Webster The effect of axial loading and axial restraint on the thermal ratchetting of thin tubes Int J Mech Sci 27 10 1985 679-92
176. F. Genna A nonlinear inequality, finite element approach to the direct computation of shakedown load safety factors Int J Mech Sci 30 10 1988 769-89
177. J.G. Weege D. Weichert Elastic-plastic shells under variable mechanical and thermal loads Int J Mech Sci 34 11 1992 863-80
178. E. Stein G. Zhang J.A. Konig Micromechanical modelling and computation of shakedown with nonlinear kinematic hardening including examples for 2-D problems In: D.R. Axelrad W. Muschik editors. Recent developments of micromechanics 1990 Springer Berlin
179. LISA. FEM-based limit and shakedown analysis for design and integrity assessment in European industry; 2001. http://www.fz-juelich.de/lisa/ index.html.
180. J. Lemaitre J.L. Chaboche Mechanics of solid materials 1990 Cambridge University Press Cambridge
181. G. Bodoville G. DeSaxce Plasticity with non-linear kinematic hardening: modeling and shakedown analysis by the bipotential approach Eur J Mech A/ Solids 20 1 2001 99-112
182. H. Magoariec S. Bourgeois O. Debordes Elastic plastic shakedown of 3D periodic heterogeneous media: A direct numerical approach Int J Plast 20 8-9 2004 1655-75
183. E. Sanchez-Palencia Non-homogenous media and vibration theory Lecture notes in physics vol. 127 1980 Springer Berlin, Germany
184. Y.H. Liu X.F. Zhang Z.Z. Cen Lower bound shakedown analysis by the symmetric Galerkin boundary element method Int J Plast 21 1 2005 21-42
185. M. Bonnet G. Maier C. Polizzotto Symmetric Galerkin boundary element methods Appl Mech Rev 51 1998 669-704
186. [186] W. Reinhardt A non-cyclic method for plastic shakedown analysis ASME, PVP Conference, Paper No. 1889, Cleveland, Ohio, USA 2003
187. K. Ikagami Y. Niitsu Experimental investigations on plastic deformation of stainless steel SUS 304 at high temperature In: A.Z. Tucson C.S. Desai et al, editors. Proceedings of the second international conference on constitutive laws for engineering materials; theory and application 1987 Elsevier New York p 111-21
188. K. Ikagami Y. Niitsu Plastic behavior of stainless steel for complex loading at high temperature Transaction of the nineth international conference on SMiRT, Lausanne vol. L 1987 AA Belkema Rotteerdam p. 345-56
189. K. Ikegami Y. Niitsu Effect of creep prestrain on subsequent plastic deformation Int J Plast 1 4 1985 331-45
190. Y. Niitsu K. Ikegami Effect of temperature variation on cyclic elastic-plastic behavior of SUS 304 stainless steel ASME, Press Vessel Tech 112 2 1990 152-7
191. Y. Ochi S. Sasaki A. Ishii A low cycle deformation properties and dislocation structures of type 316 stainless steel at elevated temperature Jpn Soc Mater Sci SMS 36 1987 261-6 [in Japanese]
192. S. Murakami M. Kawai Y. Ohmi Effects of amplitude-history and temperature-history on multiaxial cyclic behavior of type 316 stainless steel ASME J Eng Mater Tech 111 1989 278-85
193. CRIEPI Technical assessment study on pool-type LMFBR - the first progress report CRIEPI report No. A85003 1985 Central Research Institute of Electric Power Industry, Japan [in Japanese]
194. G.Z. Kang Q. Gao L. Cai Y. Sun Experimental study on uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures Nucl Eng Des 216 1-3 2002 13-26
195. G.Z. Kang Q. Gao X.J. Yang Uniaxial cyclic ratcheting and plastic flow properties of SS304 stainless steel at room and elevated temperatures Mech Mater 34 3 2002 145-59
196. Q. Gao G.Z. Kang X.J. Yang Uniaxial ratchetting of SS304 stainless steel at high temperatures: Viscoplastic constitutive model Theor Appl Fract Mech 40 1 2003 105-11
197. Y. Ohashi M. Kawai T. Kaito Inelastic behavior of type 316 stainless steel under multiaxial nonproportional cyclic stressings at elevated temperature ASME J Eng Mater Tech 107 1985 286-92
198. M. Ohami M. Sakana S. Nishino Cyclic behavior of a type 304 stainless steel in biaxial stress states at elevated temperatures Int J Plast 4 1 1988 77-98
199. Y. Takahashi T. Ogata A. Nitta Deformation and failure of type 304 stainless steel under biaxial cyclic loading at elevated temperatures Transaction of the nineth international conference on SMiRT, Anaheim 1989 CA AASMIRT Los Angeles p. 49-54
200. S. Murakami M. Kawai A. Aoki Y. Ohmi Temperature-dependence of multiaxial non-proportional cyclic behavior of type 316 stainless steel ASME, Eng Mater Tech 111 1 1989 32-39
201. K. Kaneko T. Oyamada D. Shimizu Study on viscoplastic deformation behavior of SUS316L stainless steel with effects of dynamic aging, cyclic loading and temperature Progr Exp Comput Mech Eng, Key Eng Mater KEM 243-244 2003 239-444
202. T. Takeuchi E. Kuramoto Temperature and orientation dependence of the yield stress in Ni3Ga single crystals Acta Metall 21 4 1973 415-25
203. C. Lall S. Chin D.P. Pope The orientation and temperature dependence of the yield stress of Ni3(A1,Nb) single crystals Mater Trans A 10A 1979 1323-32
204. V. Paidar D.P. Pope V. Vitek A theory of the anomalous yield behavior in L12 ordered alloys Acta Metall 32 3 1984 435-48
205. D.P. Pop S.S. Ezz Mechanical properties of Ni3Al and nickel-base alloys with high volume fraction of γ′ Int Metals Rev 29 1984 136-67
206. T.L. Lin M. Wen Dislocation structure due to high temperature deformation in the γ′ phase of a nickel-based superalloy Mater Sci Eng A113 1989 207-14
207. W.W. Milligan S.D. Antolovich Yielding and deformation behavior of the single crystal superalloy PWA 1480 Mater Trans A 18A 1987 85-95
208. H. Frenz J. Meersmann J. Ziebs H.J. Köhn R. Sievert J. Olschewski High-temperature behaviour of IN 738 LC under isothermal and thermo-mechanical cyclic loading Mater Sci Eng A 230 1-2 1997 49-57
209. L.G. Zhao J. Tong B. Vermeulen J. Byrne On the uniaxial mechanical behaviour of an advanced nickel base superalloy at high temperature Mech Mater 33 10 2001 593-600
210. M. Yaguchi M. Yamamoto T. Ogata A viscoplastic constitutive model for nickel-base superalloy, part 1: Kinematic hardening rule of anisotropic dynamic recovery Int J Plast 18 8 2002 1083-110
211. V. Venkatesh H.J. Rack Elevated temperature hardening of INCONEL690 Mech Mater 30 1 1998 69-81
212. R.W. Swindeman Cyclic stress-strain-time response of a 9Cr-1Mo-V-Nb pressure vessel steel at high temperature In: D.H.D. Solomon et al, editors. Low cycle fatique ASTM STP, 942 942 1988 American Society for
213. Sugita Y. High temperature materials in recent thermal power plants. In: Proceedings of the 10th international symposium on ultra-high temperature materials, Ube; 1996. p. 18-27.
214. M. Yaguchi Y. Takahashi A viscoplastic constitutive model incorporating dynamic strain aging effect during cyclic deformation conditions Int J Plast 16 3-4 2000 241-62
215. H.J. Chang C.H. Tsai J.J. Kai Effects of temperature on the cyclic deformation behaviour and microstructural changes of 12Cr-1MoVW martensitic stainless steel Int J Press Vessel Pip 59 1-3 1994 31-40
216. -1 Trans Jpn Soc Mech Eng JSME, Ser A 51 1990 1642-8
217. T.J. Walker High-temperature tensile and creep data for Inconel 600, 304 stainless steel and SA106B carbon steel Nucl Eng Des 148 2-3 1994 351-63
218. R.P. Skelton G.A. Webster History effects on the cyclic stress-strain response of a polycrystalline and single crystal nickel-base superalloy Mater Sci Eng A 216 1-2 1996 139-54
219. C. Testani F.M. Ielpo E. Alunni AA 2618 and AA7075 alloys superplastic transition in isothermal hot-deformation tests Mater Des 21 4 2000 305-10
220. P. Delobelle A. Bouchou Behavior and modeling of a 17-12 SPH stainless steel under cyclic, uni and bidirectional, anisothermal loadings, part I: Behavior Int J Plast 12 3 1996 295-10
221. P. Delobelle Synthesis of the elastoviscoplastic behavior and modelization of an austenitic stainless steel over a large temperature range, under uniaxial and biaxial loadings, part I: Behavior Int J Plast 9 1 1993 51-86
222. Abed FH, Voyiadjis GZ. Deformation modeling of AL-6XN stainless steel at low and high strain rates and temperatures using a combination of bcc and fcc mechanisms of metals. Int J Plast; in press.
223. G.Z. Voyiadjis F.H. Abed Microstructural based models for bcc and fcc metals with temperature and strain rate dependency Mech Mater 37 2-3 2005 355-78
224. J. Tong Z.L. Zhan B. Venneulen Modeling of cyclic plasticity and viscoplasticity of a nickel-based alloy using Chaboche constitutive equations Int J Fatigue 26 8 2004 829-37
225. M. Yaguchi M. Yamamoto T. Ogata A viscoplastic constitutive model for nickel-base superalloy, part 2: Modeling under anisothermal conditions Int J Plast 18 8 2002 1111-31
226. Z. Zhang D. Delagnes G. Bernhart Anisothermal cyclic plasticity modeling of martensitic steel Int J Fatigue 24 6 2002 635-48
227. A.B. Tanner R.D. McGinty D.L. McDowell Modeling temperature and strain rate history effects in OFHC Cu Int J Plast 15 6 1999 575-603
228. H. Samrout R. ElAbdi J.L. Chaboche Model for 28CrMoV5-8 steel undergoing thermomechanical cyclic loadings Int J Solids Struct 34 35-36 1997 4547-56
229. Yoshida F, Kobayashi M, Tsukimori K, Uno T, Fukuda Y, Igari T, et al. Inelastic analysis of materials ratchetting of 316FR at various temperature. SMiRT 14th international conference, Lyon, France; 1997.
230. P. Delobelle A. Bouchou Behavior and modeling of a 17-12 SPH stainless steel under cyclic, uni and bidirectional, anisothermal loadings, part II: Modeling Int J Plast 12 3 1996 311-41
231. Y. Takahashi Application of a two-surface plasticity model for thermal ratchetting and failure life estimation in structural model tests Nucl Eng Des 153 2-3 1995 245-56
232. T. Inoue F. Yoshida Y. Niitsu N. Ohno T. Uno A. Suzuki Inelastic stress-strain response of 2(1/4)Cr-1Mo steel under combined tension-torsion at 600 °C Nucl Eng Des 150 1 1994 107-18
233. M. Kawai A comparative study of anisotropic creep theories Nucl Eng Des 152 1-3 1994 121-133
234. P. Delobelle Synthesis of the elastoviscoplastic behavior and modelization of an austenitic stainless steel over a large temperature range, under uniaxial and biaxial loadings, part II: Phenomenological modelization Int J Plast 9 1 1993 87-118
235. T. Nakamura Y. Asada Extensive modeling of high temperature deformation for cyclically softening material Nucl Eng Des 139 3 1993 333-9
236. T. Hiroe T. Igari The viscoplasticity theory applied to the inelastic analysis at elevated temperatures Nucl Eng Des 133 2 1992 225-38
237. T. Inoue F. Yoshida N. Ohno M. Kawai Y. Niitsu S. Imatani Evaluation of inelastic constitutive models under plasticity-creep interaction in multiaxial stress state Nucl Eng Des 126 1 1991 1-11
238. J.D. Wang N. Ohno Two equivalent forms of nonisothermal kinematic hardening: Application to nonisothermal plasticity Int J Plast 7 7 1991 637-50
239. K.S. Chan U.S. Lindholm Inelastic deformation under nonisothermal loading ASME J Eng Mater Tech 112 1 1990 15-25
240. Y. Takahashi Development of a temperature-dependent cyclic plasticity constitutive model for SUS304 steel Trans Jpn Soc Mech Eng JSME, Ser A 56 1990 1630-6 [in Japanese]
241. T. Inoue N. Ohno A. Suzuki T. Igari Evaluation of inelastic constitutive models under plasticity-creep interaction for 2(1/4)Cr-1Mo steel at 600 °C Nucl Eng Des 114 3 1989 295-309
242. T. Inoue T. Igari F. Yoshida A. Suzuki S. Murakami Inelastic behaviour of 2(1/4)Cr-1Mo steel under plasticity-creep interaction condition Nucl Eng Des 90 3 1985 287-97
243. K.P. Walker Research and development for nonlinear structural modeling with advanced time-temperature dependent constitutive relationships NASA report, CR-165533 1981 NASA, USA
244. A.D. Freed Thermoviscoplastic model with application to copper NASA report, TP-2845 1988 NASA, USA
245. P.A. Bartolotta Thermomechanical cyclic hardening brehavior of Hastelloy-X NASA report, CR-1 74999 1985 NASA, USA
246. D.N. Robinson P.A. Bartolotta Viscoplastic constitutive relationships with dependence on thermomechanical history NASA report, CR-174836 1985 NASA, USA
247. H. Sehitoglu M. Karasek Observations of material behavior under isothermal and thermomechanical loading ASME J Eng Mater Tech 108 2 1986 192-8
248. H. Sehitoglu Material behavior under thermal loading ASME J Press Vessel Tech 102 1 1986 113-9
249. A. Benalla A. Ben Cheikh Constitutive equations for anisothermal elasto-viscoplasticity In: A.Z. Tucson C.S. Desai et al. editors. Proceedings of the second international conference on constitutive laws for engineering materials; theory and application 1987 Elsevier New York p 667-74
250. A. Benalla A. Ben Cheikh Elasto-viscoplastic behavior of structural components under cyclic thermal and mechanical loadings, experimental and numerical analysis Transaction of the nineth international conference on SMiRT, Lausanne vol. L 1987 AA Belkema Rotterdam p. 327-53
251. K.S. Chan U.S. Lindholm S.R. Bonder K.P. Walker High temperature inelastic deformation under loading; theory and experiment ASME J Eng Mater Tech 111 1989 345-53
252. Y. Iwasaki T. Hiroe T. Igari An application of the viscoplasticity theory to the inelastic analysis at elevated temperature: On the deformation and lifetime analysis under time varying temperature Trans Jpn Soc Mech Eng JSME, Ser A 53 1987 1838-43 [in Japanese]
253. N. Ohno Y. Takahashi K. Kuwabara Constitutive modeling of inisothermal cyclic plasticity of 304 stainless steel ASME J Eng Mater Tech 111 1 1989 106-14
254. M. Abdel-Karim Theoretical study on non-isothermal cyclic plasticity J Eng Appl Sci Fac Eng Cairo Univ 50 6 2003 1145-63