Kaizen events and organizational performance: A field study

International Journal of Productivity and Performance Management

Volumn 57, Issue 8, 2008, Pages 637-658

  Doolen, Toni L ^a   Van Aken, Eileen M ^b   Farris, Jennifer A ^c   Worley, June M ^a   Huwe, Jeremy ^d  

^a Oregon State University   (United States)

^b State University   (United States)

^c Department of Electrical and Computer Engineering   (United States)

^d Oregon Center for Clinical Investigations   (United States)

Author keywords

Continuous improvement; Lean production; Performance management

Indexed keywords

EID: 55349098511     PISSN: 17410401     EISSN: None     Source Type: Journal    
DOI: 10.1108/17410400810916062     Document Type: Article

References (75)

1. Bane, R. (2002), "Leading edge quality approaches in non-manufacturing organizations", ASQ's Annual Quality Congress Proceedings, Denver, CO, May 20-22, pp. 245-9.
2. Benders, J. and van Bijsterveld, M. (2000), "Leaning on lean: the reception of a management fashion in Germany", New Technology, Work and Employment, Vol. 15 No. 1, pp. 50-64.
3. Bicheno, J. (2001), "Kaizen and kaikaku", in Taylor, D. and Brunt, D. (Eds), Manufacturing Operations and Supply Chain Management: The Lean Approach, Thomson Learning, London.
4. Bodek, N. (2002), "Quick and easy kaizen", IIE Solutions, Vol. 34 No. 7, pp. 43-5.
5. Boyer, K.K. (1996), "An assessment of managerial commitment to lean production", International Journal of Operations & Production Management, Vol. 16 No. 9, pp. 48-59.
6. Bradley, J.R. and Willett, J. (2004), "Cornell students participate in Lord Corporation's kaizen projects", Interfaces, Vol. 34 No. 6, pp. 451-9.
7. Burke, W.W. and Litwin, G.H. (1992), "A causal model of organizational performance and change", Journal of Management, Vol. 18 No. 3, pp. 523-45.
8. Butterworth, C. (2001), "From value stream mapping to shop floor improvement: a case study of kaikaku", in Taylor, D. and Brunt, D. (Eds), Manufacturing Operations and Supply Chain Management: The Lean Approach, Thomson Learning, London.
9. Cresswell, J. (2001), "America's elite factories", Fortune, Vol. 144, pp. 206-12.
10. Creswell, J.W. (1994), Research Design: Qualitative and Quantitative Approaches, Sage Publications, Thousand Oaks, CA.
11. Cua, K.O., McKone, K.E. and Schroeder, R.G. (2001), "Relationships between implementation of TQM, JIT, and TPM and manufacturing performance", Journal of Operations Management, Vol. 19 No. 6, pp. 675-94.
12. Cuscela, K.N. (1998), "Kaizen blitz attacks work processes at Dana Corp", IIE Solutions, Vol. 30 No. 4, pp. 29-31.
13. David, I. (2000), "Drilled in kaizen", Professional Engineering, Vol. 13 No. 9, pp. 30-1.
14. Dean, J.W. Jr and Bowen, D.E. (1994), "Management theory and total quality: improving research and practice through theory development", Academy of Management Review, Vol. 19 No. 3, pp. 392-418.
15. Easton, G. and Jarrell, J.D. (1998), "The effects of total quality management on corporate performance: an empirical investigation", Journal of Business, Vol. 71 No. 2, pp. 253-307.
16. Forza, C. (1996), "Work organization in lean production and traditional plants: what are the differences?", International Journal of Operations & Production Management, Vol. 16 No. 2, pp. 42-62.
17. Fox, W.M. (1995), "Sociotechnical system principles and guidelines: past and present", The Journal of Applied Behavioral Science, Vol. 31 No. 3, pp. 91-105.
18. Fullerton, R.R., McWatters, C.S. and Fawson, C. (2003), "An examination of the relationships between JIT and financial performance", Journal of Operations Management, Vol. 21 No. 4, pp. 383-404.
19. Gerwin, D. and Kolodny, H. (1992), Management of Advanced Manufacturing Technology, John Wiley & Sons, New York, NY.
20. Grover, V. (1999), "From business reengineering to business process change management: a longitudinal study of trends and practices", IEEE Transactions on Engineering Management, Vol. 46 No. 1, pp. 36-46.
21. Hackman, J.R. and Wageman, R. (1995), "Total quality management: empirical, conceptual, and practical issues", Administrative Science Quarterly, Vol. 40 No. 2, pp. 309-42.
22. Hammer, M. (1990), "Reengineering work: don't automate, obliterate", Harvard Business Review, Vol. 68 No. 4, pp. 104-12.
23. Hasek, G. (2000), "Extraordinary extrusions", Industry Week/IW, Vol. 249 No. 17, pp. 79-80.
24. Heard, E. (1997), "Rapid-fire improvement with short-cycle kaizen", Proceedings of the American Production and Inventory Control Society, Washington, DC, pp. 519-23.
25. Hopp, W.J. and Spearman, M.L. (2004), "To pull or not to pull: what is the question?", Manufacturing & Service Operations Management, Vol. 6 No. 4, pp. 133-48.
26. Houlahan, C.J. (1994), "Reduction of front-end loading of inventory: making the airframe industry lean through better inventory management", Master of Science in Technology and Policy, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA.
27. Imai, M. (1986), Kaizen: The Key to Japan's Competitive Success, Random House, New York, NY.
28. iSixSigma LLC (2004), "Six Sigma quality resources for achieving Six Sigma results dictionary", available at: www.isixsigma.com/dictionary/ kaizen-42.htm (accessed April 20, 2006).
29. James-Moore, S.M. and Gibbons, A. (1997), "Is lean manufacture universally relevant? An investigative methodology", International Journal of Operations & Production Management, Vol. 17 Nos 9/10, pp. 899-911.
30. Kaye, M. and Anderson, R. (1999), "Continuous improvement: the ten essential criteria", International Journal of Quality & Reliability Management, Vol. 16 No. 5, pp. 485-506.
31. Keating, E.K., Oliva, R., Repenning, N.P., Rockart, S. and Sterman, J.D. (1999), "Overcoming the improvement paradox", European Management Journal, Vol. 17 No. 2, pp. 120-34.
32. Kleinsasser, J. (2003), "Kaizen seminar brings change to library, purchasing processes", Inside WSU, p. 20, available at: http://webs.wichita.edu/dt/insidewsu/show/article.asp?270 (accessed March 20, 2004).
33. Kollberg, B. and Dahlgaard, J.J. (2007), "Measuring lean initiatives in health care services: issues and findings", International Journal of Productivity and Performance Management, Vol. 56 No. 1, pp. 7-24.
34. Kosandal, P. and Farris, J. (2004), "The strategic role of the kaizen event in driving and sustaining organizational change", Proceedings of the 2004 American Society for Engineering Management Conference, Alexandria, VA, pp. 517-26.
35. Kotter, J. (1995), "Leading change: why transformation efforts fail", Harvard Business Review, Vol. 73 No. 2, pp. 59-67.
36. Kumar, S. and Harms, R. (2004), "Improving business processes for increased operational efficiency: a case study", Journal of Manufacturing Technology Management, Vol. 15 No. 7, pp. 662-74.
37. Laraia, A.C., Moody, P.E. and Hall, R.W. (1999), The Kaizen Blitz: Accelerating Breakthroughs in Productivity and Performance, The Association for Manufacturing Excellence, New York, NY.
38. Laughlin, K.K. (1995), "Increasing competitiveness with a simplified cellular process", Industrial Engineering, Vol. 27 No. 4, pp. 30-3.
39. LeBlanc, G. (1999), "Kaizen at Hill-Rom", Center for Quality of Management Journal, Vol. 8 No. 2, pp. 49-53.
40. Leth, S.A. (1994), "Critical success factors for reengineering business processes", National Productivity Review, Vol. 13 No. 4, pp. 557-68.
41. MacDuffie, J.P. and Sethuraman, K. (1996), "Product variety and manufacturing performance: evidence from the International Automotive Assembly Plant study", Management Science, Vol. 42 No. 3, pp. 350-69.
42. McNichols, T., Hassinger, R. and Bapst, G.W. (1999), "Quick and continuous improvement through kaizen blitz", Hospital Material Management Quarterly, Vol. 20 No. 4, pp. 1-7.
43. Martin, K. (2004), "Kaizen events: achieving dramatic improvement through focused attention and team-based solutions", Society for Health Systems Newsletter, available at: www.shsweb.org/resources/newsletters/ Newsletter_August_04_PDF.pdf (accessed April 20, 2006).
44. Melnyk, S.A., Calantone, R.J., Montabon, F.L. and Smith, R.T. (1998), "Short-term action in pursuit of long-term improvements: introducing kaizen events", Production & Inventory Management Journal, Vol. 39 No. 4, pp. 69-76.
45. Mika, G.L. (2002), Kaizen Event Implementation Manual, Kaizen Sensei, Wake Forest, NC.
46. Miles, M.B. and Huberman, A.M. (1994), Qualitative Data Analysis, Sage Publications, Thousand Oaks, CA.
47. Miller, B.D. (2004), "The role of cognitive psychology in lean manufacturing research", Proceedings of the 2004 Industrial Engineering and Research Conference, Houston, TX, available on CD-ROM.
48. Minton, E. (1998), "Baron of Blitz has boundless vision of continuous improvement", Industrial Management, Vol. 40 No. 1, pp. 14-21.
49. Muchinsky, P.M. (1997), Psychology Applied to Work, 5th ed., Brooks/Cole Publishing, Pacific Grove, CA.
50. Nissen, M.E. (1996), "A focused review of the reengineering literature: expert frequently asked questions", Quality Management Journal, Vol. 3 No. 3, pp. 52-66.
51. Oakeson, M. (1997), "Makes dollars & sense for the Mercedes-Benz in Brazil", IIE Solutions, Vol. 29 No. 4, pp. 32-5.
52. Panizzolo, R. (1998), "Applying the lessons learned from 27 lean manufacturers: the relevance of relationships management", International Journal of Production Economics, Vol. 55 No. 3, pp. 223-40.
53. Pasmore, W. and King, D. (1978), "Understanding organizational change: a comparative study of multifaceted interventions", Journal of Applied Behavioral Sciences, Vol. 14 No. 4, pp. 455-68.
54. Patton, M.Q. (1990), Qualitative Evaluation and Research Methods, Sage Publications, Newbury Park, CA.
55. Perez, M. and Sanchez, A.M. (2001), "Lean indicators and manufacturing strategies", International Journal of Operations & Production Management, Vol. 21 No. 11, pp. 1433-51.
56. Redding, R. (1996), "Lantech's kaizen process draws 63 observers from across the globe", Business First of Louisville, available at: http://louisville.bizjournals.com/louisville/stories/1996/09/30/story3.html (accessed June 10, 2004).
57. Repenning, N.P. and Sterman, J.D. (2002), "Capability traps and self-confirming attribution errors in the dynamics of process improvement", Administrative Science Quarterly, Vol. 47 No. 2, pp. 265-95.
58. Rusiniak, S. (1996), "Maximizing your IE value", IIE Solutions, Vol. 28 No. 6, pp. 12-16.
59. Sakakibara, S., FlynnB, B., Schroeder, R.G. and Morris, W.T. (1997), "The impact of just-in-time manufacturing and its infrastructure on manufacturing performance", Management Science, Vol. 43 No. 9, pp. 1246-57.
60. Shah, R. and Ward, P.T. (2003), "Lean manufacturing: context, practice bundles, and performance", Journal of Operations Management, Vol. 21 No. 2, pp. 129-49.
61. Sheridan, J.H. (1997), "Kaizen blitz", Industry Week/IW, Vol. 246 No. 16, pp. 18-27.
62. Sohal, A.S. (1996), "Developing a lean production organization: an Australian case study", International Journal of Operations & Production Management, Vol. 16 No. 2, pp. 91-102.
63. Soriano-Meier, H. and Forrester, P.L. (2002), "A model for evaluating the degree of leanness of manufacturing firms", Integrated Manufacturing Systems, Vol. 13 No. 2, pp. 104-9.
64. Sterman, J.D., Repenning, N.P. and Kofman, F. (1997), "Unanticipated side effects of successful quality programs: exploring a paradox of organizational improvement", Management Science, Vol. 43 No. 4, pp. 503-21.
65. Taj, S. and Berro, L. (2006), "Application of constrained management and lean manufacturing in developing best practices for productivity improvement in an auto-assembly plant", International Journal of Productivity and Performance Management, Vol. 55 Nos 3/4, pp. 332-44.
66. Taninecz, G. (1997), "Cooper Automotive-Wagner Lighting", Industry Week/IW, Vol. 246 No. 19, pp. 32-5.
67. Tanner, C. and Roncarti, R. (1994), "Kaizen leads to breakthroughs in responsiveness - and the Shingo Prize - at Critikon", National Productivity Review, Vol. 13 No. 4, pp. 517-31.
68. Taylor, J.C. and Felten, D.F. (1993), Performance by Design: Sociotechnical Systems in North America, Prentice-Hall, Englewood Cliffs, NJ.
69. Vasilash, G.S. (1997), "Getting better - fast", Automotive Manufacturing & Production, Vol. 109 No. 8, pp. 66-8.
70. Watson, L. (2002), "(2002), Striving for continuous improvement with fewer resources? Try kaizen", Marshall Star, available at: http://marshallstar.msfc.nasa.gov/11-28-02.pdf (accessed April 20, 2006).
71. White, R.E. and Prybutok, V. (2001), "The relationship between JIT practices and type of production system", Omega: The International Journal of Management Science, Vol. 29 No. 2, pp. 113-24.
72. Wittenberg, G. (1994), "Kaizen - the many ways of getting better", Assembly Automation, Vol. 14 No. 4, pp. 12-18.
73. Womack, J., Roos, D. and Jones, D. (1990), The Machine that Changed the World, Rawson and Associates, New York, NY.
74. Wright, C. and Lund, J. (2006), "Variations on a lean theme: work restructuring in retail distribution", New Technology, Work and Employment, Vol. 21 No. 1, pp. 59-74.
75. Yin, R.K. (1994), Case Study Research Design and Methods, Sage Publications, Thousand Oaks, CA.