Sheet metal forming simulation using EAS solid-shell finite elements

Finite Elements in Analysis and Design

Volumn 42, Issue 13, 2006, Pages 1137-1149

  Parente, M P L ^a   Fontes Valente, R A ^b   Natal Jorge, R M ^a   Cardoso, R P R ^b   Alves de Sousa, R J ^b  

^a UNIVERSITY OF PORTO   (Portugal)

^b UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

Anisotropy; Enhanced assumed strain; Implicit simulations; Locking; Sheet metal forming; Solid shell finite element

Indexed keywords

ANISOTROPY; CODES (STANDARDS); COMPUTER SIMULATION; DEFORMATION; FINITE ELEMENT METHOD; NUMERICAL ANALYSIS; PLASTICITY; SHEET METAL;

ENHANCED ASSUMED STRAIN (EAS); IMPLICIT SIMULATIONS; LOCKING; SHEET METAL FORMING; SOLID-SHELL FINITE ELEMENT;

METAL FORMING;

EID: 33746394597     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.finel.2006.04.005     Document Type: Article

References (58)

1. Rebelo N., Nagtegaal J.C., and Hibbitt H.D. Finite element analysis of sheet forming processes. Int. J. Numer. Methods Eng. 30 (1990) 1739-1758
2. Comsa S.D., Banabic D., Gelin J.C., Wagner S., and Siegert K. Simulation of the hydroforming processes using an orthotropic yield criterion. Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 2002) (2002) 55-60
3. Massoni E. Finite element simulation of hydroforming process. Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 2002) (2002) 249-254
4. NUMISHEET, in: D.Y. Yang, S.I. Oh, H. Huh, Y.H. Kim (Eds.), Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes-Verification of Simulation with Experiments, Jeju Island, Korea, 2002.
5. NUMISHEET, in: L.M. Smith, F. Pourboghrat, J.W. Yoon, T.B. Stoughton (Eds.), Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Detroit, USA, 2005.
6. César de Sá J.M.A., Natal Jorge R.M., Fontes Valente R.A., and Areias P.M.A. Development of shear locking-free shell elements using an enhanced assumed strain formulation. Int. J. Numer. Methods Eng. 53 (2002) 1721-1750
7. Belytschko T., and Bindeman L.P. Assumed strain stabilization of the eight node hexahedral element. Comput. Methods Appl. Mech. Eng. 105 (1993) 225-260
8. Cardoso R.P.R., Yoon J.W., Grácio J.J.A., Barlat F., and César de Sá J.M.A. Development of a one point quadrature shell element for nonlinear applications with contact and anisotropy. Comput. Methods Appl. Mech. Eng. 191 (2002) 5177-5206
9. Cardoso R.P.R., and Yoon J.W. One point quadrature shell element with through-thickness stretch. Comput. Methods Appl. Mech. Eng. 194 (2005) 1161-1199
10. Menezes L.F., and Teodosiu C. Three-dimensional numerical simulation of the deep-drawing process using solid finite elements. J. Mater. Process. Technol. 97 (2000) 100-106
11. Bui Q.V., Papeleux L., Nguyen H.G., and Ponthot J.P. Simulation of springback with enhanced assumed strain elements. Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 2002) (2002) 31-36
12. Manach P.Y., Thuilier S., Menezes L.F., and Bouvier S. Experimental and numerical investigation of springback-influence of the work hardening model. Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 2002) (2002) 91-96
13. Oliveira M.C., Alves J.L., and Menezes L.F. Springback evaluation using 3D finite elements. Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 2002) (2002) 189-194
14. Chun B.K., Jinn J.T., and Wu W.T. 3D numerical simulation of sheet metal forming processes using solid element. Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes (NUMISHEET 2002) (2002) 543-548
15. Belytschko T., Wong B.L., and Chiang H.Y. Advances in one-point quadrature shell elements. Comput. Methods Appl. Mech. Eng. 96 (1992) 93-107
16. Belytschkon T., and Leviathan I. Physical stabilization of the 4-node shell element with one-point quadrature. Comput. Methods Appl. Mech. Eng. 113 (1994) 321-350
17. Belytschkon T., and Leviathan I. Projection scheme for one-point quadrature shell elements. Comput. Methods Appl. Mech. Eng. 115 (1994) 277-286
18. Cardoso R.P.R., and Yoon J.W. One point quadrature shell elements for sheet metal forming analysis. Arch. Comput. Methods Eng. 12 (2005) 3-66
19. Simo J.C., and Rifai M.S. A class of mixed assumed strain methods and the method of incompatible modes. Int. J. Numer. Methods Eng. 29 (1990) 1595-1638
20. Ahmad S., Irons B.M., and Zienkiewicz O.C. Analysis of thick and thin shell structures by curved finite elements. Int. J. Numer. Methods Eng. 2 (1970) 419-451
21. Bathe K.J. Finite Element Procedures. second ed. (1996), Prentice-Hall, New Jersey
22. Klinkel S., and Govindjee S. Using finite strain 3D-material models in beam and shell elements. Eng. Comput. 19 (2002) 902-921
23. M.A. Crisfield, Non-Linear Finite Element Analysis of Solids and Structures, Vol. 1: Essentials, Vol. 2: Advanced Topics, Wiley, West Sussex, 1997.
24. Fontes Valente R.A., Parente M.P.L., Natal Jorge R.M., César de Sá J.M.A., and Grácio J.J. Enhanced transverse shear strain shell formulation applied to large elasto-plastic deformation problems. Int. J. Numer. Methods Eng. 62 (2005) 1360-1398
25. R.A. Fontes Valente, Developments on shell and solid-shell finite elements technology in nonlinear continuum mechanics, Ph.D. Dissertation, Faculty of Engineering of University of Porto (FEUP), Portugal, 2004 (available at 〈http://sweet.ua.pt/∼f1933〉).
26. Freischlager C., and Schweizerhof K. On a systematic development of trilinear three-dimensional solid elements based on Simo's enhanced strain formulation. Int. J. Solids Struct. 33 (1996) 2993-3017
27. Hauptmann R., and Schweizerhof K. A systematic development of "solid-shell" element formulations for linear and non-linear analyses employing only displacement degrees of freedom. Int. J. Numer. Methods Eng. 42 (1998) 49-69
28. Hauptmann R., Schweizerhof K., and Doll S. Extension of the solid-shell concept for application to large elastic and large elastoplastic deformations. Int. J. Numer. Methods Eng. 49 (2000) 1121-1141
29. Doll S., Schweizerhof K., Hauptmann R., and Freischläger C. On volumetric locking of low-order solid and solid-shell elements for finite elastoviscoplastic deformations and selective reduced integration. Eng. Comput. 17 (2000) 874-902
30. Harnau M., and Schweizerhof K. About linear and quadratic "solid-shell" elements at large deformations. Comput. Struct. 80 (2002) 805-817
31. Alves de Sousa R.J., Natal Jorge R.M., Fontes Valente R.A., and César de Sá J.M.A. A new volumetric and shear locking-free 3D enhanced strain element. Eng. Comput. 20 (2003) 896-925
32. ABAQUS, Analysis User's Manual, Version 6.4, ABAQUS, Inc, USA, 2003.
33. Vu-Quoc L., and Tan X.G. Optimal solid shells for non-linear analysis of multilayer composites. Part I: statics. Comput. Methods Appl. Mech. Eng. 192 (2003) 975-1016
34. Fontes Valente R.A., Alves de Sousa R.J., and Natal Jorge R.M. An enhanced strain 3D element for large deformation elastoplastic thin-shell applications. Comput. Mech. 34 (2004) 38-52
35. Simo J.C., and Armero F. Geometrically non-linear enhanced strain mixed methods and the method of incompatible modes. Int. J. Numer. Methods Eng. 33 (1992) 1413-1449
36. Simo J.C., Armero F., and Taylor R.L. Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems. Comput. Methods Appl. Mech. Eng. 110 (1993) 359-386
37. Fontes Valente R.A., Natal Jorge R.M., Cardoso R.P.R., César de Sá J.M.A., and Grácio J.J. On the use of an enhanced transverse shear strain shell element for problems involving large rotations. Comput. Mech. 30 (2003) 286-296
38. Betsch P., and Stein E. An assumed strain approach avoiding artificial thickness straining for a non-linear 4-node shell element. Commun. Numer. Methods Eng. 11 (1995) 899-909
39. Sze K.Y., and Yao L.Q. A hybrid stress (ANS) solid-shell element and its generalization for smart structure modelling. Part I: solid-shell element formulation. Int. J. Numer. Methods Eng. 48 (2000) 545-564
40. Barlat F., Lege D.J., and Brem J.C. A six-component yield function for anisotropic metals. Int. J. Plasticity 7 (1991) 693-712
41. Barlat F., and Lian J. Plastic behaviour and stretchability of sheet metals. Part I: a yield function for orthotropic sheets under plane stress conditions. Int. J. Plasticity 5 (1989) 51-66
42. Barlat F., Becker R.C., Brem J.C., Lege D.J., Murtha D.J., Hayashida Y., Maeda Y., Yanagawa M., Chung K., Matsui K., and Hattori S. Yielding description for solution strengthened aluminum alloys. Int. J. Plasticity 13 (1997) 385-401
43. Barlat F., Maeda Y., Chung K., Yanagawa M., Brem J.C., Hayashida Y., Lege D.J., Matsui K., Murtha S.J., Hattori S., Becker R.C., and Makosey S. Yield function development for aluminum alloy sheet. J. Mech. Phys. Solids 45 (1997) 1727-1763
44. Barlat F., Brem J.C., Yoon J.W., Chung K., Dick R.E., Choi S.H., Pourboghrat F., Chu E., and Lege D.J. Plane stress yield function for aluminum alloy sheets. Part I: theory. Int. J. Plasticity 19 (2003) 1297-1319
45. Yoon J.W., Barlat F., Dick R.E., Chung K., and Kang T.J. Plane stress yield function for aluminum alloy sheets. Part II: FE formulation and its implementation. Int. J. Plasticity 20 (2004) 495-522
46. Karafillis A.P., and Boyce M.C. A general anisotropic yield criterion using bounds and a transformation weighting tensor. J. Mech. Phys. Solids 41 (1993) 1859-1886
47. Cazacu O., and Barlat F. Generalization of Drucker's yield criterion to orthotropy. Math. Mech. Solids 6 (2001) 613-630
48. Barlat F., Banabic D., and Cazacu O. Anisotropy in sheet metals. In: Yang D.Y., Oh S.I., Huh H., and Kim Y.H. (Eds). Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes-Verification of Simulations with Experiments. Jeju Island, South Korea (2002)
49. Habraken A.M. Modelling of the plastic anisotropy of metals. Arch. Comput. Methods Eng. 11 (2004) 3-96
50. Yoon J.W., Cardoso R.P.R., Fontes Valente R.A., and Grácio J.J. Nonlinear kinematic hardening model for general non-quadratic anisotropic yield functions. In: Oñate E., and Owen D.R.J. (Eds). Proceedings of the 7th International Conference on Computational Plasticity-COMPLAS VII. CIMNE, Barcelona, Spain (2003)
51. NUMISHEET, in: J.K. Lee, G.L. Kinzel, R.H. Wagoner (Eds.), Proceedings of the 3rd International Conference on Numerical Simulation of Sheet Metal Forming Processes-Verification of Simulations with Experiments, Dearborn, Michigan, USA, 1996.
52. Yoon J.W., Yang D.Y., and Chung K. Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials. Comput. Methods Appl. Mech. Eng. 174 (1999) 23-56
53. Chung K., and Shah K. Finite element simulation of sheet metal forming for planar anisotropic metals. Int. J. Plasticity 8 (1992) 453-476
54. Wriggers P., and Reese S. A note on enhanced strain methods for large deformations. Comput. Methods Appl. Mech. Eng. 135 (1996) 201-209
55. Reese S., and Wriggers P. A stabilization technique to avoid hourglassing in finite elasticity. Int. J. Numer. Methods Eng. 48 (2000) 79-109
56. Zhang S.H., Danckert J., and Nielsen K.B. Integral hydro-bulge forming of pressure vessel heads. J. Mater. Process. Technol. 86 (1999) 184-189
57. Wang Z.R., Wang T., Kang D.C., Zhang S.H., and Fang Y. The technology of the hydro-bulging of whole spherical vessels and experimental analysis. J. Mech. Working Tech. 18 (1989) 85-94
58. Zhang S.H., and Wang Z.R. Research into the dieless hydroforming of double-layer spherical vessels. Int. J. Pressure Vessels Piping 60 (1994) 145-149