Surface topography assessment techniques based on an in-process monitoring approach of tool wear and cutting force signature

Journal of the Brazilian Society of Mechanical Sciences and Engineering

Volumn 30, Issue 3, 2008, Pages 221-230

  Oraby, S E ^a   Alaskari, A M ^a  

^a Public Authority for Applied Education and Training   (Kuwait)

Author keywords

Dynamic force signais; Surface rougnness (finish); Tool wear ana deformation; Tool wear modes (nose, flank)

Indexed keywords

CUTTING; CUTTING TOOLS; DEFORMATION; PROCESS MONITORING; SURFACE TOPOGRAPHY; SYSTEM STABILITY; WEAR OF MATERIALS;

ASSESSMENT TECHNIQUE; CUTTING PARAMETERS; DYNAMIC FORCE SIGNALS; DYNAMIC FORCES; EDGE DEFORMATION; IN-PROCESS MONITORING; ROUGHNESS VARIATION; TOOL WEAR;

SURFACE ROUGHNESS;

EID: 54549116042     PISSN: 16785878     EISSN: 18063691     Source Type: Journal    
DOI: 10.1590/S1678-58782008000300007     Document Type: Article

References (28)

1. Azouzi, R. & Guillot, M. 1997, "Online Prediction of Surface Finish and Dimensional Deviation in Turning using Neural Network Based Sensor Fusion", International Journal of Machine Tools and Manufacture, Vol. 37, No. 9, pp. 1201-1217.
2. Balakrishanan, P. & DeVries, M. F, 1983, "Analysis of mathematical Model Building Techniques Adaptable Data Base Systems", Proc. NAMRCXI, pp. 466-475.
3. Chen, J. and Lee, S. 2003, "An-Line Surface Roughness System using an Accelerometers in Turning Operations", Journal of Engineering Technology.
4. Choudhury, S. K., Jain, V. K., & Krishna, S. R. 2001, "On-Line Monitoring of Tool Wear and Control of Dimensional Inaccuracy in Turning", Trans. ASME, Journal of Manufacturing Science and Engineering, Vol. 123, No. 1, pp. 10-12.
5. Dawson, G. 2002, "Machining Hardened Steel with Polycrystalline Cubic Boron Nitride Cutting Tools", Ph.D. Thesis, Georgia Institute of Technology.
6. Draper, N. R. & Smith, H., 1967, Applied Regression Analysis, Wiley, New York, NY, USA.
7. Ezugwu, E. O., Fadare, D. A., Bonney, J., Das Silva, R. D. & Sales, W. F. 2005, "Modelling the Correlation Between Cutting and Process Parameters in High-Speed Machining of Inconel 718 Alloy using an Artificial Neural Network", International Journal of Machine Tools & Manufacture, Vol. 45, pp. 1375-1385.
8. Fang, X. D. & Shahi, H. S. J. 1997, "A New Algorithm for Developing a Reference-Based Model for Predicting Surface Roughness in Finish Machining of Steels", International Journal of Production Research, Vol. 35, No. 1, pp. 179-199.
9. Grzesk, W. and Wanat, T, 2005, "Comparative Assessment of Surface Roughness Produced by Hard Machining with Mixed Ceramic Tools Including 2D and 3D analysis", Journal of Materials processing Technology, Vo. 169, No. 3, pp. 364-371.
10. Hines, W. W. & Montgomery, D. C. 1982, Probability and statistics in Engineering and Management Science, John Wily&Sons, 2nd edition.
11. Kamarthi, S. V. & Kumara, S. R. T. 2000, "Flank Wear Estimation in Turning through Wavelet Representation of Acoustic Emission Signals", Trans. ASME, Journal of Manufacturing Science and Engineering, Vol. 122, No. 1, pp. 12-19.
12. Liang, S. Y., Hecker, R. L. & Landers, R. G. 2002, "Machining Processes Monitoring and Control: The State-of-the-Art", Proceedings of IMECE'2 ASME International Mechanical Engineering Congress & Exposition, New Orleans, Louisiana, USA.
13. Lim, C. Y. H., Lim, S. C. & Lee, K. S. 1999, "Machining Conditions and the Wear of TiC-Coated Tools", Wear Progress in Manufacturing, ASTM. STP 1362, pp. 57-69.
14. Lin, S. C. & Chang, M. F. 1998, "A Study on the Effects of Vibrations on the Surface Finish using A Surface Topography Simulation Model for Turning", International Journal of Machine Tools and Manufacture, Vo. 38, No. 7, pp. 763-782.
15. Machinability Data Handbook Machinability Data, Machinability Data Center, 2nd Edition 1972.
16. Oraby, S. E. & Hayhurst, D. R., 1990, "High-Capacity Compact ThreeComponent Cutting Force Dynamometer", International Journal of Machine Tools & Manufacturing, Vol. 30, no. 4, pp. 549-559.
17. Oraby, S. E. & Hayhurst, D. R., 1991, "Development of Models for Tool Wear Force Relationships in Metal Cutting", International Journal of Mechanical Science, Vol. 33, No. 2, pp. 125-138.
18. Oraby, S. E. 1995b, "Monitoring of Machining Processes via Force Signals - Part. I: Recognition of Different Tool Failure Forms by Spectral Analysis", Wear, Vol. 33, pp. 133-143.
19. Oraby, S. E. & Hayhurst, D. R. 2004, 'Tool Life Determination based on the Measurement of Wear and Tool Force ratio Variation", International Journal of Machine Tools & Manufacture, Vol. 44, pp. 1261-1269.
20. Oraby, S. E., Al-Mudhaf, A. F, & Hayhurst, D. R. 2005, "A Diagnostic Approach for Turning Tool based on the Dynamic Force Signals", Trans. ASME, Journal of Manufacturing Science and Engineering, Vol. 127, pp. 463-475.
21. Rao, C. S. & Srikant, R. R. 2004, "Tool Wear Monitoring - An Intelligent Approach", Proc. Institution of Mechanical Engineering (1MECH2004), Part B: Journal of Engineering Manufacture, Vol. 218, pp. 905-912.
22. Schuetz, G, 1994, "Rx for Ra measurements - average roughness", Modern Machine Shop (www.nunsonline.com).
23. Shao, H., Wang, H. L. & Zhao, X. M. 2004, "A Cutting Power Model for Tool Wear Monitoring in Milling", International Journal of Machine Tools & Manufacture, Vol. 44, pp. 1503-1509.
24. Suresh, P. V. S., Rao P. V. & Deshmukh, S. G. 2002, "A Genetic Algorithm Approach for Optimization of Surface Roughness Prediction Model", International journal of Machine Tools & Manufacture, Vol. 42, No. 6, pp. 675-680.
25. Xiao-Qi, C., Hao, Z. & Wildermuth, D. 2001, "In-process Tool Wear Monitoring through Acoustic Emission Sensing", SIMTECH Technical report (AT/01/014/AMP), Automated Material Processing Group. Automation Technology Division, Singapore Institute of Manufacturing Technology.
26. Youn, J. W. & Yang, M. Y. 2001, "A Study on the Relationships Between Static/Dynamic Cutting Force Components and Tool Wear", Trans ASME, Journal of Manufacturing Science and Engineering, Vol. 123, No. 2, pp. 196-205.
27. Zecchino, M, 2003, "Why average roughness is not enough: advances in three dimensional measurement techniques such as optical profiling have given engineers, process designers, and quality control professionals a significantly improved toolkit for describing surfaces", ASM, Advances Materials & Processes.
28. Zehnder, A., Potdor, Y. & Deng, X. 2000, "Measurement and Simulation of Temperature and Strain fields in Orthogonal Metal Cutting", International Congress of Theoretical and Applied Mechanics (ICTAM 2000).