Machining process monitoring and control: The state-of-the-art

ASME International Mechanical Engineering Congress and Exposition, Proceedings

Volumn , Issue , 2002, Pages 599-610

  Liang, Steven Y ^a   Hecker, Rogelio L ^a   Landers, Robert G ^b  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b Architectural and Environmental Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMATION; MACHINING; MACHINING CENTERS; MAN MACHINE SYSTEMS; PROCESS MONITORING; PRODUCT DESIGN;

CONTROL TECHNIQUES; FOCUS OF RESEARCHES; INCREASED PRODUCTIVITY; MACHINE PARAMETERS; MACHINING OPERATIONS; MANUFACTURING PROCESS; PROCESS AUTOMATION; PROCESS MONITORING AND CONTROL;

PROCESS CONTROL;

EID: 78249236558     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/imece2002-32640     Document Type: Conference Paper

References (77)

1. Altintas Y., "Direct Adaptive Control of End Milling Process," International Journal of Machine Tools and Manufacture, Vol. 34, No. 4, pp. 461-472, 1994.
2. Altintas, Y. and Chan, P.K., "In-Process Detection and Suppression of Chatter in Milling," International Journal of Machine Tools and Manufacture, Vol. 32, No. 3, pp. 329-347, 1992.
3. Altintas, Y., Engin, S. and Budak, E., "Analytical Stability Prediction and Design of Variable Pitch Cutters," International Mechanical Engineering Congress and Exposition, Anaheim, California, pp. 141-148, 1998.
4. Altintas, Y. and Munasinghe, W.K., "Modular CNC Design for Intelligent Machining, Part 2 - Modular Integration of Sensor Based Milling Process Monitoring and Control Tasks," ASME Journal of Manufacturing Science and Engineering, Vol. 118, No. 4, pp. 514-521, 1996.
5. Amatay G., Malkin, S., and Koren, Y., "Adaptive Control Optimization of Grinding," ASME Transactions, Journal of Engineering for Industry, Vol. 103, pp. 103-108, 1981.
6. Anderson, B.M., Cole, J.R., and Holland, R.G., "An Open Standard for Industrial Controllers," Manufacturing Review, Vol. 6, No. 3, pp. 180-191, 1993.
7. Azouzi, R. and Guillot, M., "In-Line prediction of Surface Finish and Dimensional Deviation in Turning Using Neural Network Based Sensor Fusion," International Journal of Machine Tool and Manufacture, Vol. 37, No 9, pp. 1201-1217, 1997.
8. Bailey, T., Ruget, Y., Spence, A., and Elbestawi, M.A., "Open-architecture Controller for Die and Mold Machining," American Control Conference, Seattle, Washington, June 21-23, pp. 194-199, 1995.
9. Bayramoglu, M. and Dungel, U., "A Systematic Investigation on the Use of Forces Ratios in Tool Condition Monitoring for Turning Operations," Transactions of Institute of Measurement and Control, Vol. 20, No. 2, pp. 92-97, 1998.
10. Blum, T. and Inasaki, I., "A Study of Acoustic Emission from Orthogonal Cutting Process," ASME Transactions, Journal of Engineering for Industry, Vol. 112, No. 3, pp. 203-211, 1990.
11. Budak, E. and Altintas, Y., "Analytical Prediction of Chatter Stability in Milling Part I: General Formulation and Part II: Application of the General Formulation to Common Milling Systems," ASME International Mechanical Engineering Congress and Exposition, DSC Vol. 57-1, San Francisco, California, November 12-17, pp. 545-565, 1995.
12. Carrillo, F.J., Rotella F., and Zadshakoyan, M., "Delta Approach Robust Controller for Constant Turning Force Regulation," Control Engineering Practice, Vol. 7, No. 11, pp. 1321-1331, 1999.
13. Delio, T., Tlusty, J., and Smith, S., "Use of Audio Signals for Chatter Detection and Control," ASME Journal of Engineering for Industry, Vol. 114, No. 2, pp. 146-157, 1992.
14. Du, R., Zhang, B., Hungerford, W., and Pryor, T., "Tool Conditioning Monitoring and Compensation in Finish Turning Using Optical Sensor," Proceedings of Symposium on Mechatronics, ASME Winter Annual Meeting, pp. 245-251, 1993.
15. Furness, R.J., Ulsoy, A.G., and Wu, C.L., "Supervisory Control of Drilling," ASME Journal of Engineering for Industry, Vol. 118, No. 1, pp. 10-19, 1996.
16. Giusti, F., Santochi, M., and Tantussi, G., "On Line Sensing of Flank and Crater Wear of Cutting Tools," Annals of the CIRP, 36/1, pp. 41-44, 1987.
17. Gould, L., "Sensing Tool and Drive Element Condition in Machine Tools," Sensors, pp. 5-13, 1988.
18. Harder, L., "Cutting Force Control in Turning - Solutions and Possibilities," Ph.D. Dissertation, Department of Materials Processing, Royal Institute of Technology, Stockholm, 1995.
19. Hayes, R.D., Shin, Y.C., and Nwokah, O.D.I., "Robust Control Design for Milling Processes," DSC-Vol. 50/PED-Vol. 63, ASME Winter Annual Meeting, New Orleans, Louisiana, pp. 119-125, 1993.
20. Hecker, R.L. and Liang, S.Y., "Power Feedback Control in Cylindrical Grinding Process," ASME International Mechanical Engineering Congress and Exhibition, Orlando, Florida, DSC Vol. 69-2, pp. 713-718, 2000.
21. Hekman, K.A. and Liang, S.Y., "Feedrate Optimization and Depth of Cut Control for Productivity and Part Parallelism in Grinding," International Journal of Mechatronics, Vol. 9, pp. 447-462, 1999.
22. rd International Conference on Metal Cutting and High Speed Machining, Metz, France, Vol II, pp. 262-264, June 2001.
23. Inasaki, I., Tonshoff, H.K., and Howes, T.D., "Abrasive Machining in the Future," Annals of the CIRP, Vol. 42/2, pp. 723-732, 1993.
24. Jang, D.Y., Choi, Y.G., Kim, H.G., and Hsiao, A., "Study of the Correlation Between Surface Roughness and Cutting Vibrations to Develop an On-Line Roughness Measuring Technique in Hard Turning," International Journal of Machine Tools and Manufacture, Vol. 36, No. 4, pp. 553-464, 1996.
25. Jeon, J.U. and Kim, S.W., "Optical Flank Wear Monitoring of Cutting Tools by Image Processing," Wear, Vol. 127, pp. 207-217, 1998.
26. Kakade, S., Vijayaraghavan, L., and Krishnamurthy, R. "In Process Tool Wear and Chiping Monitoring in Face Milling Operation Using Acoustic Emission," Journal of Material Processing Technology, Vol. 44, pp. 207-214, 1994.
27. Karthik, A., Chandra, S., Ramamoorthy, B., Das, S., "3D Tool Wear Measurement and Visualisation Using Stereo Imaging," International Journal of Machine Tools and Manufacture, Vol. 37, No. 11, pp. 1573-1581, 1997.
28. Kim, S.I., Landers, R.G., and Ulsoy, A.G., "Robust Machining Force Control with Process Compensation," ASME International Mechanical Engineering Congress and Exposition, New York, New York, November 11-16, 2001 (to appear).
29. Kiran M., Ramamoorthy, B., and Radhakrishnan, V., "Evaluation of Surface Roughness by Vision System," International Journal of Machine Tool Manufacture, Vol. 38, No. 5-6, pp. 685-690, 1998.
30. Koren, Y., "Adaptive Control Systems for Machining," Manufacturing Review, Vol. 2, No. 1, pp. 6-15, 1989.
31. Koren, Y., Pasek, Z.J., Ulsoy, A.G., and Benchetrit, U., "Real-Time Control Architectures for System Performance," Annals of the CIRP, Vol. 45, No. 1, pp. 377-380, 1996.
32. Landers, R.G., "Supervisory Machining Control: A Design Approach Plus Force Control and Chatter Analysis Components," Ph.D. Dissertation, Department of Mechanical Engineering and Applied Mechanics, University of Michigan, Ann Arbor, 1997.
33. Landers, R.G. and Ulsoy, A.G., "Chatter Analysis of Machining Systems with Nonlinear Force Processes," ASME International Mechanical Engineering Congress and Exposition, Atlanta, Georgia, November 17-22, DSC-Vol. 58, pp. 183-190, 1996a.
34. Landers, R.G. and Ulsoy, A.G., "Machining Force Control Including Static, Nonlinear Effects," Japan USA Symposium on Flexible Automation, Boston, Massachusetts, July 8-10, pp. 983-990, 1996b.
35. Landers, R.G. and Ulsoy, A.G., Supervisory Machining Control: Design Approach and Experiments," Annals of the CIRP, Vol. 47/1, pp. 301-306, 1998.
36. Landers, R.G. and Ulsoy, A.G., "Model-Based Machining Force Control," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 122, No. 3, pp. 521-527, 2000.
37. Lauderbaugh, L.K. and Ulsoy, A.G., "Model Reference Adaptive Force Control in Milling," ASME Journal of Engineering for Industry, Vol. 111, No. 1, pp. 13-21, 1989.
38. Lee, A-C. and Liu, C-S., "Analysis of Chatter Vibration in a Cutter-Workpiece System," International Journal of Machine Tools and Manufacture, Vol. 31, No. 2, pp. 221-234, 1991a.
39. Lee, A-C. and Liu, C-S., "Analysis of Chatter Vibration in the End Milling Process," International Journal of Machine Tools and Manufacture, Vol. 31, No. 4, pp. 471-479, 1991b.
40. Li Y., Rowe, W.B., Chen, X., and Mills, B., "Study and Selection of Grinding Conditions. Part1: A Hybrid Intelligent System for Selection of Grinding Conditions," Proceedings of Institute of. Mechanical Engineers, Vol. 213, Part B, pp. 131-142, 1999.
41. Liang, S.Y. and Dornfeld, D.A., "Detection of Cutting Tool Wear Using Time Series Modeling of Acoustic Emission Signals," ASME Transactions, Journal of Engineering for Industry, Vol. 111, No. 3, pp. 199-205, 1989.
42. Lin, S.C., DeVor, R.E., and Kapoor, S.G., "The Effects of Variable Speed Cutting on Vibration Control in Face Milling," ASME Journal of Engineering for Industry, Vol. 112, No. 1, pp. 1-11, 1990.
43. Lindsay, R.P., "The Effect of Wheel Wear Rate on the Grinding Performance of Three Wheel Grades," Annals of the CIRP, Vol. 32/1, 1983.
44. Lister, P.M., "On Line Measure of Tool Wear," Ph.D. Dissertation, Manufacturing and Machine Tools Division, Department of Mechanical Engineering, UMIST, Manchester, UK, 1993.
45. Longanbach, D.M. and Kurfess, T.R., "Real-Time Measurement for an Internal Grinding System," Transactions of NAMRI/SME, Vol. 26, pp.317-322, 1998.
46. Longanbach, D.M. and Kurfess, T.R., "In-Process Gage Frequency Response Measurement," Proceedings of the 7th Mechatronics Forum International Conference, Atlanta, Georgia, 2000.
47. Malkin, S., "In-Proces Control of Thermal Damage During Grinding", SME Technical Paper, Paper No. MR84-532, 1984.
48. Masory, O. and Koren, Y., "Variable Gain Adaptive Control System for Turning," Journal of Manufacturing Systems, Vol. 2, No. 2, pp. 165-173, 1983.
49. Minis, I. and Yanushevsky, R., "A New Theoretical Approach for the Prediction of Machine Tool Chatter in Milling," ASME Journal of Engineering for Industry, Vol. 115, No. 1, pp. 1-8, 1993.
50. Moriwaki, T. and Tobito, M., "A New Approach to Automatic Detection of Life of Coated Tool Based on Acoustic Emission Measurement," ASME Transactions, Journal of Engineering for Industry, Vol. 112, No. 3, pp. 212-218, 1990.
51. Nordgren, R.E. and Nwokah, O., "Parametric and Unstructured Uncertainty Models in Discrete Time Systems," DSC Vol. 55-1, ASME Winter Annual Meeting, Chicago, Illinois, November 6-11, 1994.
52. Nowicki, B. and Jarkiewicz, A., "The In-Process Surface Roughness Measurement Using Fringe Capacitive (FFC) Method," International Journal of Machine Tools and Manufacture, Vol. 38, No. 5-6, pp. 125-732, 1998.
53. Oraby, S.E. and Hayhurst, D.R., "Development of Models for Tool Wear Force Relationship in Metal Cutting," International Journal of Machine Tools and Manufacture, Vol. 33, No. 2, pp. 125-138, 1991.
54. Park, J., Pasek, Z.J., Birla, S., Yansong, S., Koren, Y., Shin, K.G., and Ulsoy, A.G., "An Open Architecture Testbed for Real-Time Monitoring and Control of Machining Processes," American Control Conference, Seattle, Washington, June 21-23, pp. 200-204, 1995.
55. Pedersen, K.B., "Wear Measurement of Cutting Tools by Computer Vision," International Journal of Machine Tools and Manufacture, Vol. 30, No. 1, pp. 131-139. 1990.
56. Pritschow, G., "Automation Technology - On the Way to an Open System Architecture," Robotics and Computer Integrated Manufacturing, Vol. 7, No. 1/2, pp. 103-111, 1990.
57. Punyko, A.J. and Bailey, F.N., "A Delta Transform Approach to Loop Gain-Phase Shaping Design of Robust Digital Control Systems," International Journal of Robust and Nonlinear Control, Vol. 4, No. 1, pp. 65-86, 1994.
58. Radulescu, R., Kapoor, S.G., and DeVor, R.E., "An Investigation of Variable Spindle Speed Face Milling for Tool-Work Structures with Complex Dynamics, Part 1: Simulation Results and Part 2: Physical Explanation," ASME Journal of Manufacturing Science and Engineering, Vol. 119, No. 3, pp. 266-280, 1997.
59. Rober, S.J. and Shin, Y.C., "Modeling and Control of CNC Machining Using a PC-Based Open Architecture Controller," Mechatronics, Vol. 5, No. 4, pp. 401-420, 1995.
60. Rober, S.J., Shin, Y.C., and Nwokah, O.D.I., "A Digital Robust Controller for Cutting Force Control in the End Milling Process," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 119, No. 2, pp. 146-152, 1997.
61. Schofield, S. and Wright, P., "Open Architecture Controllers for Machine Tools, Part 1: Design Principles," ASME Transactions, Journal of Manufacturing Science and Engineering, Vol. 120, pp. 417-424, 1998.
62. Shiraishi, M., Kume, E., and Hoshi, T., "Suppression of Machine-Tool Chatter by State Feedback Control," Annals of the CIRP, 1988.
63. Shiraishi, M., Yamanaka, K., and Fujita, H., "Optimal Control of Chatter in Turning," International Journal of Machine Tools and Manufacture, Vol. 31, No. 1, pp. 31-43, 1991.
64. Shunsheruddin, A. and Kim, S.W., "Adaptive Control of the Cylindrical Plunge Grinding Process," Proceedings of Symposium on Grinding, ASME Winter Annual Meeting, November 17-22, pp. 373-387, 1985.
65. Smith, S. and Tlusty, J., "Efficient Simulation Programs for Chatter in Milling," Annals of the CIRP, Vol. 42/1, pp. 463-466, 1993.
66. Tarng, Y.S. and Li, T.C., "Detection and Suppression of Drilling Chatter," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 116, No. 4, pp. 729-734, 1994.
67. Teltz, R. and Elbestawi, M.A., "Hierarchical, Knowledge-Based Control in Turning," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 115, No. 2A, pp. 122-132, 1993.
68. Tomizuka, M., Oh, J.H., and Dornfeld, D.A., "Model Reference Adaptive Control of the Milling Process," ASME Winter Annual Meeting, Boston, Massachusetts, November 13-18, pp. 55-63, 1983.
69. Tsai, Y.H., Chen, J.C., and Lou S.J., "An In-Process Surface Recognition System Based on Neural Networks in End Milling Cutting Operation," International Journal of Machine Tools and Manufacture, Vol. 39, pp. 583-605, 1999.
70. Tsai, M.D., Takata, S., Inui, M., Kimura, F., and Sata, T., "Prediction of Chatter Vibration by Means of a Model-Based Cutting Simulation System," Annals of the CIRP, Vol. 39/1, pp. 447-450, 1990.
71. Ulsoy, A.G., Koren, Y., and Rasmussen, F., "Principle Developments in the Adaptive Control of Machine Tools," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 105, No. 2, pp. 107-112, 1983.
72. Weck, M., Altintas, Y., and Beer, C., "CAD Assisted Chatter-Free NC Tool Path Generation in Milling," International Journal of Machine Tools and Manufacture, Vol. 34, No. 6, pp. 879-891, 1994.
73. Wright, P.K. and Dornfeld, D.A., "Agent-Based Manufacturing Systems," Transactions of NAMRI/SME, Vol. 24, pp. 241-246, 1996.
74. Wright, P.K., Pavlakos, E., and Hansen, F., "Controlling the Physics of Machining on an Open-Architecture Manufacturing System," ASME Winter Annual Meeting, Atlanta, Georgia, December 1-6, pp. 129-144, 1991.
75. Yellowley, I. and Pottier, P.R., "The Integration of Process and Geometry Within an Open Architecture Machine Tool Controller," International Journal of Machine Tools and Manufacture, Vol. 34, No. 2. pp. 277-293, 1994.
76. Yao, Y., Fang, X.D., and Arndt, G., "Comprehensive Tool Wear Estimation in Finish-Machining Via Multivariate Time-Series Analysis of 3-D Cutting Forces," Annals of the CIRP, Vol. 39/1, pp. 57-60, 1990.
77. Zhang, H., Ni, J., and Shi, H, "Machining Chatter Suppression by Means of Spindle Speed Variation - Part I: The Numerical Solution and Part II: Experimental Investigation," S.M. Wu Symposium on Manufacturing Science, Vol. I, Evanston, Illinois, May 27-28, pp. 161-175, 1994.