Friction drive of an SAW motor. Part V: Design criteria

IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

Volumn 55, Issue 10, 2008, Pages 2288-2297

  Shigematsu, Takashi ^a   Kurosawa, Minoru Kuribayashi ^a  

^a TOKYO INSTITUTE OF TECHNOLOGY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ACOUSTIC SURFACE WAVE DEVICES; ACOUSTIC SURFACE WAVE FILTERS; ACOUSTIC WAVE VELOCITY; ACOUSTIC WAVES; ACOUSTICS; CARBON DIOXIDE ARC WELDING; CRYSTALLOGRAPHY; ELECTRIC CONDUCTIVITY; ELECTRIC CURRENTS; ELECTRIC UTILITIES; LITHIUM; NIOBIUM COMPOUNDS; SAWING; STATORS;

CHEMICAL INERTNESSES; CHEMICAL REDUCTIONS; CONTACT ELECTRIFICATIONS; CONTACT PRESSURES; FLAT PLANES; FRICTION DRIVES; LITHIUM NIOBATE; MECHANICAL STRESSES; OPTIMUM GEOMETRIES; SAW MOTORS; SHARP EDGES; SLIDING; STATOR SURFACES; SURFACE ACOUSTIC WAVES; SURFACE FAILURES;

MOTORS;

ACOUSTICS; ARTICLE; COMPUTER AIDED DESIGN; COMPUTER SIMULATION; EQUIPMENT; EQUIPMENT DESIGN; FRICTION; INSTRUMENTATION; MICROELECTROMECHANICAL SYSTEM; MOTION; THEORETICAL MODEL; TRANSDUCER;

ACOUSTICS; COMPUTER SIMULATION; COMPUTER-AIDED DESIGN; EQUIPMENT DESIGN; EQUIPMENT FAILURE ANALYSIS; FRICTION; MICRO-ELECTRICAL-MECHANICAL SYSTEMS; MODELS, THEORETICAL; MOTION; TRANSDUCERS;

EID: 54049107388     PISSN: 08853010     EISSN: None     Source Type: Journal    
DOI: 10.1109/TUFFC.927     Document Type: Article

References (33)

1. A. M. Prokhorov and S. Yu, Kuz'Minov, Physics and Chemistry of Crystalline Lithium Niobate. Bristol, UK: Adam Hilger, 1990.
2. 3," in Properties of Lithium, Niobate. London, UK: INSPEC, 2002, pp. 91-96.
3. Specification Sheet: Black-LT, Black-LN, Yamaju Ceramics Co., Ltd.
4. P. F. Bordui, D. H. Jundt, E. M. Standifer, R. G. Norwood, R. L. Sawin, and J. D. Galipeau, "Chemically reduced lithium niobate single crystals: Processing, properties and improved surface acoustic wave device fabrication and performance," J. Appl. Phys. (Berl.), vol. 85, no. 7, pp. 3766-3769, 1999.
5. M. I. Kornfeld, "Frictional electrification," J. Phys. D Appl. Phys., vol. 9, no. 8, pp. 1183-1192, 1976.
6. J. N. Israelaclivili, Intermolecular and Surface Forces, 2nd ed. Burlington, MA: Academic Press, 1992.
7. G. B. Dorjin and I. G. Simakov, "Acoustic study of adsorbed liquid layers," Acoust. Phys., vol. 48, no. 4, pp. 436-440, 2002.
8. H. Tian and T. Matsudaira, "The role of relative humidity, surface roughness and liquid build-up on static friction behavior of the head/disk interface," Trans. ASME, J. Tribol., vol. 115, no. 1, pp. 28-35, 1993.
9. X. Tian and B. Bhushan, "The micro-meniscus effect of a thin liquid film on the static friction of rough surface contact," J. Phys. D Appl. Phys., vol. 29, no. 1, pp. 163-178, 1996.
10. 3," Sov. Phys. Solid State, vol. 13, no. 6, pp. 1413-1415, 1971.
11. T. Shigematsu, M. K. Kurosawa, and K. Asai, "Sub-nanometer stepping drive of surface acoustic wave motor," in Proc. IEEE Conf. Nanotechnology, 2003, pp. 209-302.
12. T. Shigematsu and M. K. Kurosawa, "Friction drive of an SAW motor, Part IV: Physics of contact," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 55, no. 10, pp. 2277-2287, 2008.
13. A. G. Eguiluz and A. A. Maradudin, "Frequency shift and attenuation length of a Rayleigh wave due to surface roughness," Phys. Rev. B, vol. 28, no. 2, pp. 728-747, 1983.
14. A. V. Shchegrov, "Propagation of surface acoustic waves across the randomly rough surface of an anisotropic elastic medium," J. Appl. Phys., vol. 78, no. 3, pp. 1565-1574, 1995.
15. D. A. Hills, D. Nowell, and A. Sackfield, Mechanics of Elastic Contacts. Burlington, MA: Butterworth-Heinemann, 1993.
16. T. Shigematsu and M. K. Kurosawa, "Friction drive of an SAW motor, Part III: Modeling," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 55, no. 10, pp. 2266-2276, 2008.
17. M. K. Kurosawa, H. Itoh, and K. Asai, "Elastic friction drive of surface acoustic wave motor," Ultrasonics, vol. 41, no. 4, pp. 271-275, 2003.
18. 3," J. Phys. C Solid State Phys., vol. 19, no. 19, pp. 3649-3658, 1986.
19. J. A. Greenwood and J. B. P. Williamson, "Contact of nominally flat surfaces," Proc. R. Soc. Lond. A Math. Phys. Sci., vol. 295, pp. 300-319, 1966.
20. J. A. Greenwood and J. H. Tripp, "The contact of two nominally flat rough surfaces," Proc. Instn. Mech. Engrs., vol. 185, pp. 625-633, 1970-1971.
21. T. Shigematsu and M. K. Kurosawa, "Friction drive of an SAW motor, Part I: Measurements," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 55, no. 9, pp. 2005-2015, 2008.
22. T. Shigematsu and M. K. Kurosawa, "Friction drive of an SAW motor, Part II: Analyses," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 55, no. 9, pp. 2016-2024, 2008.
23. P. J. Feenstra, "Modeling and control of surface acoustic wave motors," Ph.D. dissertation, Univ. Twente, Enschede, The Netherlands, 2005.
24. S. T. Patton, K. C. Eapen, and J. S. Zabinski, "Effects of adsorbed water and sample aging in air on the μN level adhesion force between Si(100) and silicon nitride," Tribol. Int., vol. 34, no. 7, pp. 481-491, 2001.
25. M. Ciavarella, "Indentation by nominally flat or conical indenters with rounded corners," Int. J. Solids Struct., vol. 36, no. 27, pp. 4149-4181, 1999.
26. K. L. Johnson, Contact Mechanics. Cambridge: Cambridge University Press, 1985.
27. I. G. Goryacheva, Contact Mechanics in Tribology. Norwell, MA: Kluwer Academic Publishers, 1998.
28. M. Abramowitz and I. A. Stegun, Handbook of Mathematical Functions. New York: Dover Publications, 1965.
29. M. K. Kurosawa, M. Takahashi, and T. Higuchi, "Elastic contact conditions to optimize friction drive of surface acoustic wave motor," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 45, no. 5, pp. 1229-1237, 1998.
30. K. Asai and M. K. Kurosawa, "Estimation of the squeeze film effect in a surface acoustic wave motor," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 52, no. 10, pp. 1722-1734, 2005.
31. J. I. McCool, "Comparison of models for the contact of rough surfaces," Wear, vol. 107, no. 1, pp. 37-60, 1986.
32. N. Patir and H. S. Cheng, "An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication," Trans. ASME, J. Lubric Technol., vol. 100, no. 1, pp. 12-17, 1978.
33. T. Makino, S. Morohoshi, and S. Taniguchi, "Application of average flow model to thin film gas lubrication," Trans. ASME, J. Tribol., vol. 115, no. 1, pp. 185-190, 1993.