Friction drive of an SAW motor. Part III: Modeling

IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

Volumn 55, Issue 10, 2008, Pages 2266-2276

  Shigematsu, Takashi ^a   Kurosawa, Minoru Kuribayashi ^a  

^a TOKYO INSTITUTE OF TECHNOLOGY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ACOUSTIC SURFACE WAVE DEVICES; ACOUSTIC SURFACE WAVE FILTERS; ACOUSTIC WAVE VELOCITY; ACOUSTIC WAVES; ACOUSTICS; COMPUTER SIMULATION; ELECTRIC CURRENTS; FINITE ELEMENT METHOD; MOTORS; STIFFNESS; THREE DIMENSIONAL; TRIBOLOGY;

ANALYTICAL SOLUTIONS; CONTACT FRICTIONS; CONTACT PROBLEMS; FINITE-ELEMENT ANALYSES; FRICTION COEFFICIENTS; FRICTION DRIVES; MODELING; MODELING METHODS; MODELING PROCEDURES; NORMAL DIRECTIONS; NORMAL DISPLACEMENTS; NUMERICAL SIMULATIONS; RELIABLE; SAW MOTORS; STRESS FIELDS; SURFACE ACOUSTIC WAVES; SURFACE LAYERS; TANGENTIAL DIRECTIONS; TANGENTIAL DISPLACEMENTS; UNDERLYING LAYERS;

FRICTION;

ACOUSTICS; ARTICLE; COMPUTER AIDED DESIGN; COMPUTER SIMULATION; EQUIPMENT; EQUIPMENT DESIGN; FRICTION; INSTRUMENTATION; MICROELECTROMECHANICAL SYSTEM; MOTION; THEORETICAL MODEL; TRANSDUCER;

ACOUSTICS; COMPUTER SIMULATION; COMPUTER-AIDED DESIGN; EQUIPMENT DESIGN; EQUIPMENT FAILURE ANALYSIS; FRICTION; MICRO-ELECTRICAL-MECHANICAL SYSTEMS; MODELS, THEORETICAL; MOTION; TRANSDUCERS;

EID: 54049098380     PISSN: 08853010     EISSN: None     Source Type: Journal    
DOI: 10.1109/TUFFC.925     Document Type: Article

References (38)

1. T. Yamaguchi, K. Adachi, Y. Ishimine, and K. Kato, "Wear mode control of drive tip of ultrasonic motor for precision positioning," Wear, vol. 256, no. 1-2, pp. 145-152, 2004.
2. T. Ishii, S. Ueha, K. Nakaniura, and K. Ohnishi, "Wear properties and life prediction of frictional materials for ultrasonic motors," Jpn. J. Appl. Phys., vol. 34, pt. 1, no. 5B, pp. 2765-2770, 1995.
3. P. Rehbein and J. Wallaschek, "Friction and wear behavior of polymer/steel and alumina/alumina under high-frequency fretting conditions," Wear, vol. 216, no. 2, pp. 97-105, 1998.
4. T. Honda and K. Kato, "The influence of ultrasonic amplitude on friction and wear properties in ultrasonic drive," J. Jpn. Soc. Tribol., vol. 41, no. 2, pp. 170-177, 1996 (in Japanese).
5. T. Honda and K. Kato, "The influence of ultrasonic shape on friction and wear properties in ultrasonic drive," J. Jpn. Soc. Tribol., vol. 41, no. 2, pp. 178-184, 1996 (in Japanese).
6. K. Kato and K. Adachi, "Wear mechanisms," in Modern Tribology Handbook. Boca Raton, FL: CRC Press, 2001, pp. 273-300.
7. R. G. Bayer, "Influence of oxygen on the wear of silicon," Wear, vol. 69, no. 2, pp. 235-239, 1981.
8. S. Venkatesan and B. Bhushan, "The sliding friction and wear behavior of single-crystal, polycrystalline and oxidized silicon," Wear, vol. 171, no. 1-2, pp. 25-32, 1994.
9. B. Lawn, Fracture of Brittle Solids, 2nd ed. Cambridge: Cambridge University Press, 1993.
10. K. Asai and M. K. Kurosawa, "Simulation model of surface acoustic wave motor considering tangential rigidity," Electron. Commun. Jpn., vol. 87, pt. 3, no. 2, pp. 54-66, 2003.
11. P. J. Feenstra, "Modeling and control of surface acoustic wave motors," Ph.D. dissertation, Univ. Twente, Enschede, The Netherlands, 2005.
12. S. P. Timoshenko and J. N. Goodier, Theory of Elasticity, 3rd ed. New York: McGraw-Hill, 1951.
13. J. W. Harding and I. N. Sneddon, "The elastic stress produced by the indentation of the plane surface of a semi-infinite elastic solid by a rigid punch," Proc. Camb. Philos. Soc., vol. 41, pp. 16-26, 1945.
14. I. N. Sneddon, "Bousinesq's problem for a flat-ended cylinder," Proc. Camb. Philos. Soc., vol. 42, pp. 29-39, 1948.
15. R. A. Westmann, "Asymmetric mixed boundary-value problems of the elastic half-space," Trans. ASME J. Appl. Mech., vol. 32, no. 2, pp. 411-417, 1965.
16. T. Shigematsu and M. K. Kurosawa, "Friction drive of an SAW motor, Part II: Analyses," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 55, no. 9, pp. 2016-2024, 2008.
17. D. A. Spence, "The hertz contact problem with finite friction," J. Elast., vol. 5, no. 3-4, pp. 297-319, 1975.
18. J. R. Turner, "The frictional unloading problem on a linear elastic half-space," J. Inst. Math. Appl., vol. 24, pp. 429-469, 1979.
19. K. L. Johnson, Contact Mechanics. Cambridge: Cambridge University Press, 1985.
20. T. Shigematsu and M. K. Kurosawa, "Friction drive of an SAW motor, Part I: Measurements," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 55, no. 9, pp. 2005-2015, 2008.
21. E. Rabinowicz, Friction and Wear of Materials. New York: John Wiley & Sons, 1965.
22. 3 single crystals," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 46, no. 5, pp. 1315-1323, 1999.
23. K. K. Wong, Ed., Properties of Lithium Niobate. London, UK: INSPEC, 2002.
24. W.-Q. Chen, "Inclined circular flat punch on a transversely isotropic piezoelectric half-space," Arch. Appl. Mech., vol. 69, no. 7, pp. 455-464, 1999.
25. W.-Q. Chen, "On piezoelastic contact problem for a smooth punch," Int. J. Solids Struct., vol. 37, no. 16, pp. 2331-2340, 2000.
26. A. E. Giannakopoulos and S. Suresh, "Theory of indentation of piezoelectric materials," Acta Mater., vol. 47, no. 7, pp. 2153-2164, 1999.
27. G. W. Farnell, "Properties of elastic surface waves," in Physical Acoustics, vol. 6. Burlington, MA: Academic Press, 1970, pp. 109-166.
28. J. R. Willis, "Boussinesq problems for an anisotropic half-space," J. Mech. Phys. Solids, vol. 15, pp. 331-339, 1967.
29. J. J. Campbell and W. R. Jones, "A method for estimating optimal crystal cuts and propagation directions for excitation of piezoelectric surface waves," IEEE Trans. Sonics Ultrason., vol. SU-15, no. 4, pp. 209-217, 1968.
30. Acoustic Wave Device Technology Handbook (in Japanese), Japan Society for the Promotion of Science, Acoustic Wave Device Technology No. 150 Committee, Ed., Ohmsha, 1991
31. 3," J. Appl. Phys., vol. 43, no. 3, pp. 856-862, 1972.
32. M. T. Hanson, "The elastic field for an upright or tilted sliding circular flat punch on a transversely isotropic half space," Int. J. Solids Struct., vol. 31, no. 4, pp. 567-586, 1994.
33. I. A. Robertson, "Force vertical vibration of a rigid circular disc on a semi-infinite elastic solid," Proc. Camb. Philos. Soc., vol. 62, pp. 547-553, 1966.
34. G. M. L. Gladwell, "The calculation of mechanical impedances relating to an indenter vibrating on the surface of a semi-infinite elastic body," J. Sound Vibrat, vol. 8, no. 2, pp. 215-228, 1968.
35. G. M. L. Gladwell, "Forced tangential and rotatory vibration of a rigid circular disk on a semi-infinite solid," Int. J. Eng. Sci., vol. 6, no. 10-c, pp. 591-607, 1968.
36. D. Maugis, "Adhesion of spheres: The JKR-DMT transition using a dugdale model," J. Colloid Interface Sci., vol. 150, no. 1, pp. 243-269, 1992.
37. K. L. Johnson, "Adhesion and friction between a smooth elastic spherical asperity and a plane surface," Proc. R. Soc. Lond. A, vol. 453, pp. 163-179, 1997.
38. T. Shigematsu and M. K. Kurosawa, "Friction drive of an SAW motor, Part IV: Physics of contact," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 55, no. 10, pp. 2277-2287, 2008.