Finite element analysis of temperature field, microstructure and residual stress in multi-pass butt-welded 2.25Cr-1Mo steel pipes

Computational Materials Science

Volumn 43, Issue 4, 2008, Pages 681-695

  Deng, Dean ^a   Murakawa, Hidekazu ^b  

^a Department of Technical Development   (Japan)

^b OSAKA UNIVERSITY   (Japan)

Author keywords

Finite element method; Multi pass welding; Numerical analysis; Phase transformation; Welding residual stress

Indexed keywords

AUSTENITE; BAINITIC TRANSFORMATIONS; BUTT WELDING; CHROMIUM; DIFFERENCE EQUATIONS; FINITE ELEMENT METHOD; MATHEMATICAL TRANSFORMATIONS; MICROSTRUCTURE; MOLYBDENUM; PETROLEUM PIPELINES; PHASE TRANSITIONS; PIPE; RESIDUAL STRESSES; STEEL; STEEL PIPE; STRENGTH OF MATERIALS; STRESSES; WEAR RESISTANCE; WELDING; YIELD STRESS;

2.25CR-1MO STEEL; BAINITE TRANSFORMATIONS; EXPERIMENTAL MEASUREMENTS; FINITE ELEMENT ANALYSIS; JOHNSON-MEHL-AVRAMI-KOLMOGOROV EQUATION; MULTI-PASS; MULTI-PASS WELDING; NUMERICAL ANALYSIS; PHASE TRANSFORMATION; SIMULATION RESULTS; SOLID-STATE PHASE TRANSFORMATIONS; TEMPERATURE FIELDS; WELDING RESIDUAL STRESS; WELDING RESIDUAL STRESSES; WELDING TEMPERATURE FIELD; YIELD STRENGTHS;

STEEL METALLURGY;

EID: 52949131904     PISSN: 09270256     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.commatsci.2008.01.025     Document Type: Article

References (43)

1. Reed R.C., and Bhadeshia H.K.D.H. Acta Metallurgica et Materialia 42 11 (1994) 3663-3678
2. Nonaka I., Ito T., Ohtsuki S., and Takagi Y. International Journal of Pressure Vessels and Piping 78 (2001) 807-811
3. Andren H.O., Cai G.J., and Svensson L.E. Applied Surface Science 87/88 (1995) 200-206
4. Kimura K., Watanabe T., Hongo H., Yamazaki M., Kinugawa J., and Irie H. Quarterly Journal of Japan Welding Society 21 2 (2003) 195-203
5. Al-Mazrouee A., Singh Raman R.K., and Ibrahim R.N. Journal of Materials Processing Technology 164-165 (2005) 964-970
6. Sudha C., Thomas Paul V., Terrance A.L.E., Saroja S., and Vijayalakshmi M. Welding Journal April (2006) 71s-80s
7. Nishikawa S., Horii Y., Murakawa H., Hao L., and Tanaka J. JWS of Proceedings 71 (2002) 366-367
8. Francis J.A., Bhadeshia H.K.D.H., and Withers P.J. Materials Science and Technology 23 9 (2007) 1009-1020
9. Ravi Vishnu, ASM Handbook, vol. 6, ASM International 1994, pp. 70-87.
10. Zinn W., and Scholtes B. Handbook of Residual Stress and Deformation of Steel (2002) 391-396
11. Deng D., Luo Y., Serizawa H., Shibahara M., and Murakawa H. Transactions of JWRI 32 2 (2003) 325-333
12. Bhadeshia H.K.D.H. Materials Science and Engineering A 378 (2004) 34-39
13. H.K.D.H. Badeshia, J.A. Francis, H.J. Stone, S. Kundu, R.B. Rogge, P.J. Whiters, L. Karlsson, Transformation plasticity in steel weld metals, in: Proceedings of the 10th International Aachen Welding Conference, October, 2007, pp. 22-25.
14. Coret M., Calloch S., and Combescure A. International Journal of Plasticity 18 12 (2002) 1707-1727
15. Taleb L., and Sidoroffb F. International Journal of Plasticity 19 10 (2003) 1821-1842
16. Vincenta Y., Jullienb J.-F., and Gilles P. International Journal of Solids and Structures 42 14 (2005) 4077-4098
17. Wang Z., and Inoue T. Materials Science and Technology 1 October (1985) 899-903
18. Leblond J.B., Mottet G., Devaux J., and Devaux J.-C. Materials Science and Technology 1 October (1985) 815-822
19. Leblond J.B., and Devaux J.C. Acta Metallurgica 32 1 (1984) 137-146
20. Ueda Y., Kim Y.C., Chen C., and Tang Y.M. Transactions of JWRI 14 1 (1985) 153-162
21. Ueda Y., Ronda J., Murakawa H., and Ikeuchi K. Transactions of JWRI 23 2 (1994) 149-167
22. Talijiat B., Radhakrishnan B., and Zacharia T. Materials Science & Engineering A 246 (1998) 45-54
23. Cho S.H., and Kim J.W. Science and Technology of Welding and Joining 7 4 (2002) 212-216
24. Yang Q.X., Yao M., and Park J.K. Computational Materials Science 29 1 (2004) 37-42
25. Deng D., and Murakawa H. Computational Materials Science 37 3 (2006) 209-219
26. Japan Power Engineering & Inspection Corporation, Examination of effective heated band for local PWHT, 2002.
27. Hibbitt, Karlsson, Sorensen, ABAQUS/Standard User's Manual, vols. 1-3, Version 6.3.
28. ASM Handbook, vol. 6, Welding, Brazing, and Soldering, 1994.
29. Swallow E., and Bhadeshia H.K.D.H. Material Science and Technology 12 February (1996) 121-125
30. Withers P.J., and Bhadeshia H.K.D.H. Material Science and Technology 17 April (2001) 366-375
31. Kundu S., Hase K., and Bhadeshia H.K.D.H. Proceedings of the Royal Society A 463 (2007) 2309-2328
32. Zhang W., Elmer J.W., and DebRoy T. Materials Science and Engineering A 333 (2002) 320-325
33. Radaj D. Heat Effects of Welding Temperature Fields, Residual Stress, Distortion (1992), Springer-Verlag
34. Adil G.K., and Bhole S.D. Canadian Metallurgical Quarterly 31 2 (1992) 151-157
35. Kang S.-H., and Im Y.-T. International Journal of Mechanical Science 49 (2007) 423-439
36. Kang S.H., and Im Y.T. Three-dimensional finite-element analysis of the quenching process of plain-carbon steel with phase transformation, metallurgical and material Transformation A 36 (2005) 2315-2325
37. .
38. G.J. Oliver, Fitting Parameters to Phase Transformation Kinetic Equations from CCT and TTT Diagram Data, Research Report, Joining and Welding Research Institute, Osaka University, 2002.
39. Lusk M., and Jou H.-J. Metallurgical and Materials Transactions A 28 February (1997) 287-291
40. Fernandes F.M.B., Denis S., and Simon A. Mathematical model coupling phase transformation and temperature evolution during quenching of steels. Materials Science and Technology 1 October (1985) 838-844
41. G. Krauss, Principles of Heat Treatment of Steel, ASM International, Materials Park, Ohio.
42. Terasaki T., Fukuya M., Kawakami H., and Hasegawa K. Journal of the Japan Society of Naval Architects and Ocean Engineers 2 (2005) 169-177
43. Tsai M.C., Chiou C.S., and Yang J.R. Journal of Materials Science 38 11 (2003) 2373-2391