Thermo-mechanical consequences of phase transformations in the heat-affected zone using a cyclic uniaxial test

International Journal of Solids and Structures

Volumn 42, Issue 14, 2005, Pages 4077-4098

  Vincent, Yannick ^a   Jullien, Jean François ^b   Gilles, Philippe ^c  

^a ESI GROUP   (France)

^b UNIVERSITÉ DE LYON   (France)

^c AREVA NP   (France)

Author keywords

Cyclic loading; Mechanical testing; Phase transformation; Transformation induced plasticity

Indexed keywords

AUSTENITIC TRANSFORMATIONS; COMPUTER SIMULATION; CYCLIC LOADS; HARDENING; PLASTICITY; STRAIN; STRESS ANALYSIS; THERMAL EXPANSION; THERMOANALYSIS; THERMOMECHANICAL TREATMENT;

CYCLIC LOADING; KINEMATIC STRAIN HARDENING; PLASTIC STRAIN; TRANSFORMATION-INDUCED PLASTICITY;

HEAT AFFECTED ZONE;

EID: 13844306828     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2004.11.018     Document Type: Article

References (30)

1. Abrassart, F., 1972. Influence des transformations martensitiques sur les propriétés mécaniques des alliages du système Fe-Ni-Cr-C, Ph.D. Thesis, Université de Nancy I
2. J.-M. Bergheau, and J.-B. Leblond Coupling between heat flow, metallurgy and stress-strain computations in steels-The approach developed in the computer code SYSWELD for welding or quenching Rappaz Ozgu Mahin Modeling of Casting, Welding and Advanced Solidification Processes V 1991 The Minerals, Metals and Materials Society 203 210
3. L. Börjesson, and L.-E. Lindgren Thermal, metallurgical and mechanical models for simulation of multipass welding ASME J. Eng. Mater. Technol. 123 Jan 2001 106 111
4. Cavallo, N., 1998. Contribution à la validation expérimentale de modèles décrivant la ZAT lors d'une opération de soudage, Thesis, INSA, Lyon
5. M. Cherkaoui, M. Berveiller, and H. Sabar Micromechanical modeling of martensitic transformation induced plasticity (TRIP) in austenitic single crystals Int. J. Plast. 14 1998 597 626
6. S. Denis Influence of stresses on the kinetics of pearlitic transformation during continuous cooling Acta Metall. 35 7 1987 1621 1632
7. Devaux, J., 1998. Comportement plastique des aciers en cours de transformations de phases-Etude numérique des lois de mélange et de la plasticité de transformation. Rapport Systus International LDEW98/235, p. 29
8. Dupas, P., et al., 1998. Comparaison des modèles de comportement mécanique tenant compte des effets métallurgiques implantés dans le Code_Aster et Sysweld. Rapport EDF/DER HT-2C/97/070/A
9. F.D. Fischer Modelling and simulation of transformation induced plasticity in elasto-plastic materials Berveiller Fischer Mechanics of Solids with Phase Changes, CISM Courses and Lectures no 368 1997 Springer Verlag 189 237
10. F.D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud, and T. Antretter A new view on transformation induced plasticity (TRIP) Int. J. Plast. 16 2000 723 748
11. Gautier, E., 1985. Transformations perlitiques et martensitique sous contrainte de traction dans les aciers, Thèse de Doctorat ès-Sciences Physiques, Institut National Polytechnique de Lorraine, Nancy, p. 176
12. Giusti, J., 1981. Contraintes et déformations résiduelles d'origine thermique-Application au soudage et à la trempe des aciers, Ph.D. thesis, Université Paris VI
13. G.W. Greenwood, and R.H Johnson The deformation of metals under small stresses during phase transformation Proc. Roy. Soc. 283 1965 403 422
14. Y.Z. Itoh, and H. Kashiwaya A study of cyclic thermal straining in welded joint, using a closed-loop, servo-controlled testing machine J. Pressure Vessel Technol. Trans. ASME 114 1992 422 427
15. J.B. Leblond Mathematical modelling of transformation plasticity in steels II. Coupling with strain hardening phenomena Int. J. Plast. 5 1989 573 591
16. Leblond, J.B., 1990. Qualification expérimentale du modèle de plasticité de transformation. FRAMASOFT + CSI Internal Report n°CSS/L/NT.90/4022
17. J.B. Leblond, G. Mottet, and J.C. Devaux A theoretical and numerical approach to the plastic behaviour of steels during phase transformations I. Derivation of general relations J. Mech. Phys. Solids 34 1986 395 410
18. J.B. Leblond, G. Mottet, and J.C. Devaux A theoretical and numerical approach to the plastic behaviour of steels during phase transformations II. Study of classical plasticity for ideal-plastic phases J. Mech. Phys. Solids 34 1986 411 432
19. J.B. Leblond, J. Devaux, and J.C. Devaux Mathematical modelling of transformation plasticity in steels I. Case of ideal-plastic phases Int. J. Plast. 5 1989 551 572
20. Magee, C.L, 1966. Transformation kinetics, microplasticity and ageing of martensite in Fe-3l-Ni. Ph.D. Thesis Carnegie Mellon University, Pittsburg
21. W. Mitter Umwandlungsplastizität und ihre Berücksichtignung bei der Berechnung von Eigenspannungen 1986 Bornträger Verlag Asdfadsf
22. J. Ronda, and G.J. Oliver Consistent thermo-mechano-metallurgical model of welded steel with unified approach to derivation of phase evolution laws and transformation-induced plasticity Comput. Methods Apppl. Mech. Eng. 189 2 2000 361 418
23. K. Satoh Transient thermal stresses of weld heat-affected zone by both-ends-fixed bar analogy Trans. Jpn. Weld. Soc. 3 1 1972 125 134
24. K. Satoh Thermal stresses developed in high-strength steels subjected to thermal cycles simulating weld heat-affected zone Trans. Jpn. Weld. Soc. 3 1 1972 135 142
25. A. Simon, S. Denis, and E. Gautier Effet des sollicitations thermo-mécaniques sur les transformations de phases dans l'état solide. Aspects métallurgique et mécanique Journal de Physique IV 4 1994 199 213 (Colloque C3 supplément au journal de physique III)
26. Sjöström, S., 1984. Interactions and constitutive models for the calculation of quench stresses in steel. Calculation of internal stresses in heat treatment of metallic materials. Int. Symposium, 23-24 May, Linköping, Sweden, pp. 221-246
27. Taleb, L., 1998. Etude du comportement mécanique des aciers en cours de transformations métallurgiques-Synthèse des résultats des essais base de données pour les transformations uniques. Rapport INSA/URGC-Structures 1/972/005a, 17p
28. J.C. Videau, G. Cailletaud, and A. Pineau Modélisation des effets mécaniques des transformations de phases pour le calcul des structures Journal de Physique IV 4 1994 227 232 (Colloquium C3, extra issue to Journal de Physique III)
29. Vincent, Y., 2002. Simulation numérique des conséquences métallurgiques et mécaniques induites par une opération de soudage-Acier 16MND5. Thesis, INSA, Lyon
30. Z.G. Wang, and T. Inoue Viscoplastic constitutive relation incorporating phase transformation-Application to welding Mater. Sci. Technol. 1 1985 899 903