A numerical study of interface behavior of diamond coated cutting tools

Transactions of the North American Manufacturing Research Institution of SME

Volumn 36, Issue , 2008, Pages 533-540

  Hu, Jianwen ^a   Chou, Y Kevin ^a   Thompson, Raymond G ^b  

^a University of Alabama   (United States)

^b Vista Engineering Inc   (United States)

Author keywords

Cohesive zone modeling; Contact mechanics; Diamond coating tools; Indentation simulations; Interface delamination

Indexed keywords

CARBIDE SUBSTRATES; COATING-SUBSTRATE INTERFACES; COHESIVE ZONE MODEL; COHESIVE ZONE MODELING; CONTACT MECHANICS; DIAMOND COATED CUTTING TOOLS; DIAMOND COATING TOOLS; DIAMOND COATINGS; FINITE-ELEMENT CODES; INDENTATION PROCESS; INDENTATION SIMULATIONS; INTERFACE BEHAVIOR; INTERFACE DELAMINATION; MANUFACTURING RESEARCH INSTITUTION; MATERIAL FRACTURE; NUMERICAL STUDIES; SIMULATION RESULTS; TOOL PERFORMANCE; TRACTION-SEPARATION;

CARBIDES; CLADDING (COATING); COATINGS; CUTTING TOOLS; DELAMINATION; DIAMONDS; FINITE ELEMENT METHOD; FRACTURE FIXATION; INDUSTRIAL RESEARCH; NUMERICAL ANALYSIS; RESEARCH; SEPARATION; SOCIETIES AND INSTITUTIONS; STEEL SHEET; SUBSTRATES; TUNGSTEN; TUNGSTEN CARBIDE;

DIAMOND CUTTING TOOLS;

EID: 52349114596     PISSN: 10473025     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (25)

1. Barenblatt, G.I. (1962). "Mathematical Theory of Equilibrium Cracks." Advances in Applied Mechanics, Academic Press, New York, pp. 55-125.
2. Cavalli, M.N. (2003). "Cohesive Zone Modeling of Structural Joint Failure." Ph.D. thesis. University of Michigan, Ann Arbor.
3. Cardinale, G.F., and Robinson, C.J. (1992). "Fracture strength measurement of filament assisted CVD polycrystalline diamond films." Journal of Materials Research, Vol. 7, pp. 1432-1437.
4. Chai, H. (2003). "Fracture Mechanics Analysis of Thin Coating under Spherical Indentation." International Journal of Fracture, Vol. 119, pp. 263-285.
5. Chai, H., and B.R. Lawn (2004). "Fracture Mode Transitions in Brittle Coatings on Compliant Substrates as a Function of Thickness." Journal of Materials Research, Vol. 19, pp. 1752-1761.
6. Chiang, S.S., D.B. Marshall, and A.G. Evans (1981). Surface and Interfaces in Ceramics and Ceramic-metal Systems. Plenum, New York, pp 603.
7. Dias, A.M.S., P.J. Modenesi, and G.C. de Godoy (2006). "Computer simulation of stress distribution during Vickers hardness of WC-6Co." Materials Research, Vol. 9, pp. 73-76.
8. Dugdale, D. S. (1960). "Yielding of Steel Sheets Containing Slits." Journal of Mechanics and Physics of Solids, Vol. 8, pp. 100-104.
9. Grujicic, M., G. Cao and G.M. Fadel (2001). "Effective Materials Properties: Determination and Application in Mechanical Design and Optimization." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 215, pp. 225-234.
10. Gupta, P.K., and J.A. Walowit (1974). "Contact Stress between an Elastic Cylinder and a Layered Elastic Solid." ASME Journal of Lubrication Technology, Vol. 94, pp. 250-257.
11. Huang, B., M. Zhao and T. Zhang (2004). "Indentation Fracture and Indentation Delamination in ZnO Film/Si Substrate System." Philosophical Magazine, Vol. 84, pp. 1233-1256.
12. Huang, T.H., C.T. Kuo, and T.S. Lin (1992). "The Role of Cemented WC Substrate Morphology on the Diamond Film Growth and Cracking Resistance." Scripta Matallurgica et Materialia, Vol. 26, pp. 1481-1486.
13. Hutchinson, J.W., and A.G. Evans (2000). "Mechanics of Materials: Top-down Approaches to Fracture." Acta Materialia, Vol. 48, pp. 125-135.
14. Jindal, P.C., D.T. Quinto, and G.J. Wolfe (1987). "Adhesion Measurements of Chemically Vapor Deposited and Physically Vapor Deposited Hard Coatings on WC-Co Substrates." Thin Solid Films, Vol 154, pp. 361-375.
15. Leroy, J.M., and B. Villechaise (1990). "Stress determination in elastic coating and substrate under both normal and tangential loads." Mechanics of Coatings, Elsevier, New York, edited by D. Dowson, C.M. Taylor and M. Godet.
16. Li, X., Kasai, T., Ando, T., Shikida, M., and Sato, K. (2004). "Tensile fracture behavior of single crystal silicon film having a notch of sub-micronlength." IEEE Proceedings of 2004 International Symposium on Micro/Nano-Mechatronics for Information-Based Society, pp. 57-61.
17. Mallika, K., and R. Komanduri (1999). "Diamond Coatings on Cemented Tungsten Carbide Tools by Low-pressure Microwave CVD." Wear, Vol. 224, pp. 245-266.
18. Mehrotra, P.K., and D.T. Quinto (1985). "Techniques for Evaluating Mechanical Properties of Hard Coatings." Journal of Vacuum Science and Technology A, Vol. 3, pp. 2401-2405.
19. Michler, J. and E. Blank (2001). "Analysis of coating fracture and substrate plasticity induced by spherical indentors: diamond and diamond-like carbon layers on steel substrates." Thin Solid Films, Vol. 381, pp. 119-134.
20. Miranda, P., A. Pajares, F. Guiberteau, F. Deng, and B.R. Lawn (2003). "Designing Damage-resistant Brittle-coating Structure: I. Bilayers." Acta Materialia, Vol. 51, pp. 4347-4356.
21. Saijo, K., M. Yagi, K. Shibuki and S. Takatsu (1990). "The Importance of the Adhesion Strength of Diamond Films." Surface and Coatings Technology, Vol. 43/44, pp. 30-40.
22. Souza, R.M., A. Sinatora, G.G.W. Mustoe, and J.J. Moore (2001). "Numerical and Experimental Study of the Circular Cracks Observed at the Contact Edges of the Indentations of Coated Systems with Soft Substrates." Wear, Vol. 251, 1337-1346.
23. Tsui, Y.C., S.J. Howard and T.W. Clyne (1994). "The Effect of Residual Stresses on the Debonding of Coatings - II. An Experimental Study of a Thermally Sprayed System." Acta Metallurgical Materials, Vol. 42, pp. 2837-2844.
24. Wang, T.H., Fang, T.H., and Lin, Y.C. (2007). "Analysis of the substrate effects of strain-hardening thin films on silicon under nanoindentation." Applied Physics A: Materials Science and Processing, Vol. 86, pp. 335-341.
25. Xu, X.P. and A. Needleman (1994). "Continuum Modeling of Interfacial Decohesion." Dislocations 93, Solid State Phenomena, Vol. 35-36, pp. 287-302.