Fiber-reinforced dental composites in beam testing

Dental Materials

Volumn 24, Issue 11, 2008, Pages 1435-1443

  van Heumen, Céleste C M ^a   Kreulen, Cees M ^a   Bronkhorst, Ewald M ^a   Lesaffre, Emmanuel ^b,c   Creugers, Nico H J ^a  

^a RADBOUD UNIVERSITY MEDICAL CENTER   (Netherlands)

^b ERASMUS MEDICAL CENTER   (Netherlands)

^c UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

Fiber reinforced composite; Flexural modulus; Flexural strength; Literature review; Three point bending test

Indexed keywords

ABSTRACTING; BENDING STRENGTH; BENDING TESTS; CARBON FIBER REINFORCED PLASTICS; COMPOSITE BEAMS AND GIRDERS; DENTAL COMPOSITES; FIBER OPTICS; FOOD PROCESSING; REGRESSION ANALYSIS; REINFORCEMENT; RESINS; STANDARDS; STRENGTH OF MATERIALS; TESTING;

BEAM TESTING; COMPOSITE BEAMS; COMPOSITE RESINS; FIBER ARCHITECTURE; FIBER-REINFORCED COMPOSITE; FIBER-REINFORCED COMPOSITES; FIXED PARTIAL DENTURE; FLEXURAL MODULUS; FLEXURAL STRENGTH; IN VITRO TESTING; INTERNATIONAL STANDARD; LITERATURE REVIEW; LITERATURE SEARCH; MEDLINE; MULTIPLE REGRESSION MODELS; REINFORCED COMPOSITES; REINFORCING EFFECTS; RESIN COMPOSITES; THREE-POINT BENDING TEST; THREE-POINT BENDING TESTS;

FIBERS;

GLASS; GLASS FIBER; POLYETHYLENE DERIVATIVE; RESIN;

CHEMISTRY; DENTAL CARE; DENTURE; ELASTICITY; HUMAN; MATERIALS TESTING; META ANALYSIS; PLIABILITY; REVIEW;

COMPOSITE RESINS; DENTAL STRESS ANALYSIS; DENTURE, PARTIAL, FIXED; ELASTICITY; GLASS; HUMANS; MATERIALS TESTING; PLIABILITY; POLYETHYLENES;

EID: 52049088494     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2008.06.006     Document Type: Review

References (42)

1. Isaac D. Engineering aspects of the structure and properties of polymer-fibre composites. Proceedings of the first symposium on fibre reinforced plastics in dentistry. Turku, Finland (1998) 1-21
2. Jokstad A., Gokce M., and Hjortsjo C. A systematic review of the scientific documentation of fixed partial dentures made from fiber-reinforced polymer to replace missing teeth. Int J Prosthodont 18 (2005) 489-496
3. Suzuki S., Saimi Y., and Ono T. Evaluation of a new fiber-reinforced resin composite. J Biomed Mater Res B: Appl Biomed 76 1 (2006) 184-189
4. Dyer S., Lassila L., and Vallittu P. Effect of cross-sectional design on the modulus of elasticity and toughness of fiber-reinforced composite materials. J Prosthet Dent 94 (2005) 219-226
5. Ellakwa A., Shortall A., Shehata M., and Marquis P. The influence of fibre placement and position on the efficiency of reinforcement of fibre reinforced composite bridgework. J Oral Rehabil 28 (2001) 785-791
6. Xu H., Schumacher G., Eichmiller F., Peterson R., Antonucci J., and Mueller H. Continuous-fiber preform reinforcement of dental resin composite restorations. Dent Mater 19 (2003) 523-530
7. Bouillaguet S., Schutt A., Alander P., Schwaller P., Buerki G., Michler J., et al. Hydrothermal and mechanical stresses degrade fiber-matrix interfacial bond strength in dental fiber-reinforced composites. J Biomed Mater Res B: Appl Biomed 76B (2006) 98-105
8. Tezvergil A., Lassila L., and Vallittu P. The effect of fiber orientation on the thermal expension coefficients of fiber-reinforced composites. Dent Mater 19 (2003) 471-477
9. Dyer S., Lassila L., Jokinen M., and Vallittu P. Effect of fiber position and orientation on fracture load of fiber-reinforced composite. Dent Mater 20 (2004) 947-955
10. Tezvergil A., Lassila L., and Vallittu P. The effect of fiber orientation on the polymerization shrinkage strain of fiber-reinforced composites. Dent Mater 22 (2006) 610-616
11. Nakamura T., Waki T., Kinuta S., and Tanaka H. Strength and elastic modulus of fiber-reinforced composites used for fabricating FPDs. Int J Prosthodont 16 (2003) 549-553
12. Viguie G., Malquarti G., Vincent B., and Bourgeois D. Epoxy/carbon composite resins in dentistry: mechanical properties related to fiber reinforcements. J Prosthet Dent 72 (1994) 245-249
13. Chong K.H., and Chai J. Strength and mode of failure of unidirectional and bidirectional glass fiber-reinforced composite materials. Int J Prosthodont 16 (2003) 161-166
14. Alander P., Lassila L., and Vallittu P. The span length and cross-sectional design affect values of strength. Dent Mater 21 (2005) 347-353
15. Ellakwa A., Shortall A., Shehata M., and Marquis P. Influence of veneering composite composition on the efficacy of fiber-reinforced restorations (FRR). Oper Dent 26 (2001) 467-475
16. International Standard, Dentistry-polymer-based filling, restorative and luting materials. In: ISO 4049; 2000. p. 1-27.
17. Eckrote K.A., Burstone C.J., Freilich M.A., Messer G.E., and Goldberg A.J. Shear in flexure of fiber composites with different end supports. J Dental Res 82 4 (2003) 262-266
18. Chong K.H., and Chai J. Probability of failure of veneered glass fiber-reinforced composites and glass-infiltrated alumina with or without zirconia reinforcement. Int J Prosthodont 16 5 (2003) 487-492
19. Behr M., Rosentritt M., Lang R., and Handel G. Flexural properties of fiber reinforced composite using a vacuum/pressure or a manual adaptation manufacturing process. J Dent 28 (2000) 509-514
20. Lastumaki T., Lassila L., and Vallittu P. Flexural properties of the bulk fiber-reinforced composite DC-Tell used in fixed partial dentures. Int J Prosthodont 14 (2001) 22-26
21. Chai J., Takahashi Y., Hisama K., and Shimizu H. Water sorption and dimensional stability of three glass fiber-reinforced composites. Int J Prosthodont 17 (2004) 195-199
22. Chai J., Takahashi Y., Hisama K., and Shimizu H. Effect of water storage on the flexural properties of three glass fiber-reinforced composites. Int J Prosthodont 18 (2005) 28-33
23. Fujii K., Arikawa H., Kanie T., Hamano T., Nishi Y., and Nagaoka E. Dynamic viscoelastic properties of commercial glass-fibre reinforced resin used for crowns and bridges. J Oral Rehabil 29 (2002) 827-834
24. Behr M., Rosentritt M., Taubenhansl P., Kolbeck C., and Handel G. Fracture resistance of fiber-reinforced composite restorations with different framework design. Acta Odontol Scand 63 (2005) 153-157
25. Dyer S.R., Lassila L.V., Jokinen M., and Vallittu P.K. Effect of fiber position and orientation on fracture load of fiber-reinforced composite. Dent Mater 20 (2004) 947-955
26. Lassila L.V., Tezvergil A., Lahdenpera M., Alander P., Shinya A., and Vallittu P.K. Evaluation of some properties of two fiber-reinforced composite materials. Acta Odontol Scand 63 (2005) 196-204
27. Gohring T., Gallo L., and Luthy H. Effect of water storage, thermocycling, the incorporation and site of placement of glass-fibers on the flexural strength of veneering composite. Dent Mater 21 (2005) 761-772
28. Alander P., Lassila L.V., Tezvergil A., and Vallittu P.K. Acoustic emission analysis of fiber-reinforced composite in flexural testing. Dent Mater 20 (2004) 305-312
29. Drummond J.L., Lin L., and Miescke K.J. Evaluation of fracture toughness of a fiber containing dental composite after flexural fatigue. Dent Mater 20 6 (2004) 591-599
30. Kilfoil B.M., Hesby R.A., and Pelleu Jr. G.B. The tensile strength of a composite resin reinforced with carbon fibers. J Prosthet Dent 50 1 (1983) 40-43
31. Ellakwa A., Shortall A., and Marquis P. Influence of fibre position on the flexural properties and strain energy of a fibre-reinforced composite. J Oral Rehabil 30 (2003) 679-682
32. Pereira C., Demarco F., Cenci M., Osinaga P., and Piovesan E. Flexural strength of composites: influences of polyethylene fiber reinforcement and type of composite. Clin Oral Invest 7 (2003) 116-119
33. Bae J.M., Kim K.N., Hattori M., Hasegawa K., Yoshinari M., Kawada E., et al. Fatigue strengths of particulate filler composites reinforced with fibers. Dent Mater J 23 2 (2004) 166-174
34. Bae J.M., Kim K.N., Hattori M., Hasegawa K., Yoshinari M., Kawada E., et al. The flexural properties of fiber-reinforced composite with light-polymerized polymer matrix. Int J Prosthodont 14 (2001) 33-39
35. Ellakwa A.E., Shortall A.C., and Marquis P.M. Influence of fiber type and wetting agent on the flexural properties of an indirect fiber reinforced composite. J Prosthet Dent 88 (2002) 485-490
36. Lassila L., and Vallittu P. The effect of fiber position and polymerization condition on the flexural properties of fiber-reinforced composite. J Contemp Dent Pract 5 2 (2004) 14-26
37. Anagnostou M, Composite thickness effect on fracture force of two fiber-reinforced composites. In: IADR; J Dent Res 2006.
38. Garoushi S.K., Lassila L.V., Tezvergil A., and Vallittu P.K. Fiber-reinforced composite substructure: load-bearing capacity of an onlay restoration and flexural properties of the material. J Contemp Dent Pract 7 4 (2006) 1-13
39. Chung S.M., Yap A.U.J., Tsai K.T., and Yap F.L. Elastic modulus of resin-based dental restorative materials: a microindentation approach. J Biomed Mater Res B: Appl Biomed 72B (2005) 246-253
40. Palmer A.J., and Sendi P.P. Meta-analysis in oral health care. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 87 2 (1999) 135-141
41. Kreulen C.M., Creugers N.H.J., and Meijering A.C. Meta-analysis of anterior veneer restorations in clinical studies. J Dent 26 4 (1998) 345-353
42. Glenny A., Esposito M., Coulthard P., and Worthington H. The assessment of systematic reviews in dentistry. Eur J Oral Sci 111 (2003) 85-92